Swelling the micelle core surrounding single-walled carbon nanotubes with water-immiscible organic solvents

Solvatochromic shifts in the absorbance and fluorescence spectra are observed when surfactant-stabilized aqueous single-walled carbon nanotube (SWNT) suspensions are mixed with immiscible organic solvents. When aqueous surfactant-suspended SWNTs are mixed with o-dichlorobenzene, the spectra closely match the peaks for SWNTs dispersed in only pure o-dichlorobenzene. These spectral changes suggest that the hydrophobic region of the micelle surrounding SWNTs swells with the organic solvent when mixed. The solvatochromic shifts of the aqueous SWNT suspensions are reversible once the solvent evaporates. However, some surfactant-solvent systems show permanent changes to the fluorescence emission intensity after exposure to the organic solvent. The intensity of some large diameter SWNT (n, m) types increase by more than 175%. These differences are attributed to surfactant reorganization, which can improve nanotube coverage, resulting in decreased exposure to quenching mechanisms from the aqueous phase.     

Sidewall functionalization of single-walled carbon nanotubes with organic peroxides

Single-wall carbon nanotubes (SWNTs) and their fluorinated derivatives (F-SWNTs) were reacted with organic peroxides including benzoyl and lauroyl peroxide to produce phenyl and undecyl sidewall functionalized SWNTs, respectively, which were characterized by Raman, FTIR, and UV-Vis-NIR spectra as well as TGA/MS, TGA/FTIR, and TEM data.     

Engineered Molecular Chain Ordering in Single‐Walled Carbon Nanotubes/Polyaniline Composite Films for High‐Performance Organic Thermoelectric Materials

Single‐walled carbon nanotubes (SWNTs)/polyaniline (PANI) composite films with enhanced thermoelectric properties were prepared by combining in situ polymerization and solution processing. Conductive atomic force microscopy and X‐ray diffraction measurements confirmed that solution processing and strong π–π interactions between the PANI and SWNTs induced the PANI molecules to form a highly ordered structure. The improved degree of order of the PANI molecular arrangement increased the carrier mobility and thereby enhanced the electrical transport properties of PANI. The maximum in‐plane electrical conductivity and power factor of the SWNTs/PANI composite films reached 1.44×10³ S cm^?1 and 217 μW m^?1 K^?2, respectively, at room temperature. Furthermore, a thermoelectric generator fabricated with the SWNTs/PANI composite films showed good electric generation ability and stability. A high power density of 10.4 μW cm^?2 K^?1 was obtained, which is superior to most reported results obtained in organic thermoelectric modules.     

Rapidly functionalized, water-dispersed carbon nanotubes at high concentration

Microwave-assisted functionalization of single-wall carbon nanotubes (SWNTs) in a mixture of nitric and sulfuric acids was carried out to synthesize highly water-dispersible nanotubes. Stable concentrations as high as 10 mg/mL were obtained in deionized water that are nearly 2 orders of magnitude higher than those previously reported. This was after only 3 min of functionalization reaction. Fourier transform infrared spectra showed the presence of carboxylated (-COOH) and acid sulfonated (-SO(2).OH or -SO(3)(-) H(+)) groups on the SWNTs. On the basis of elemental analysis, it was estimated that one out of three carbon atoms was carboxylated, while one out of 10 carbon atoms was sulfonated. The Raman spectra taken both in aqueous dispersion and in the solid phase indicated charge transfer from the SWNT backbone to the functional groups. Scanning electron microscope images of thin films deposited from an aqueous suspension showed that the SWNTs were aligned parallel to one another on the substrate. The images also indicated some reduction in average length of the nanotubes. Transmission electron microscope images of thin films from a dilute methanol dispersion showed that the SWNTs were extensively debundled. Laser light scattering particle size measurements did not show evidence for the existence of particles in the 3-800 nm size range, indicating that the functionalized SWNTs might have dispersed to have formed a true solution. Moreover, the microwave-processed SWNTs were found to contain significantly smaller amounts of the original iron catalyst relative to that present in the starting nanotubes. The electrical conductivity of a thermally annealed thin membrane obtained from the microwave-functionalized SWNTs was found to be the same as that of a similar membrane obtained from a suspension of the starting nanotubes.     

Sidewall functionalization of single-walled carbon nanotubes by addition of dichlorocarbene

We report the sidewall functionalization of soluble HiPco single-walled carbon nanotubes (SWNTs) by addition of dichlorocarbene. The dichlorocarbene-functionalized SWNTs [(s-SWNT)CCl(2)] retain their solubility in organic solvents such as tetrahydrofuran and dichlorobenzene. The degree of dichlorocarbene functionalization was varied between 12% and 23% by using different amounts of the dichlorocarbene precursor. Because the addition of dichlorocarbene saturates the carbon atoms on the sidewall of the SWNTs and effectively replaces the delocalized partial double bonds with a cyclopropane functionality, the optical spectra of the SWNTs change dramatically. We estimate that the saturation of 25% of the pi-network electronic structure of the SWNTs is sufficient to remove all vestiges of the interband transitions in the infrared spectrum. The transitions at the Fermi level in the metallic SWNTs that appear in the far-infrared (FIR) region of the spectrum show a dramatic decrease of intensity on dichlorocarbene functionalization. The FIR region of the spectrum allows a clear differentiation between the covalent and the ionic chemistry of SWNTs. In contrast with covalent functionalization, we show that reaction of the SWNTs with bromine vapor leads to a strong increase in absorptions at the Fermi level that is observable in the FIR due to hole doping of the semiconducting SWNTs. Thermal treatment of the (s-SWNT)CCl(2) above 300 degrees C resulted in the breakage of C-Cl bonds, but did not restore the original electronic structure of the SWNTs.     

Assessment of chemically separated carbon nanotubes for nanoelectronics

It remains an elusive goal to obtain high performance single-walled carbon-nanotube (SWNT) electronics such as field effect transistors (FETs) composed of single- or few-chirality SWNTs, due to broad distributions in as-grown materials. Much progress has been made by various separation approaches to obtain materials enriched in metal or semiconducting nanotubes or even in single chiralties. However, research in validating SWNT separations by electrical transport measurements and building functional electronic devices has been scarce. Here, we performed length, diameter, and chirality separation of DNA functionalized HiPco SWNTs by chromatography methods, and we characterized the chiralities by photoluminescence excitation spectroscopy, optical absorption spectroscopy, and electrical transport measurements. The use of these combined methods provided deeper insight to the degree of separation than either technique alone. Separation of SWNTs by chirality and diameter occurred at varying degrees that decreased with increasing tube diameter. This calls for new separation methods capable of metallicity or chirality separation of large diameter SWNTs (in the approximately 1.5 nm range) needed for high performance nanoelectronics. With most of the separated fractions enriched in semiconducting SWNTs, nanotubes placed in parallel in short-channel (approximately 200 nm) electrical devices fail to produce FETs with high on/off switching, indicating incomplete elimination of metallic species. In rare cases with a certain separated SWNT fraction, we were able to fabricate FET devices composed of small-diameter, chemically separated SWNTs in parallel, with high on-/off-current (I(on)/I(off)) ratios up to 105 owing to semiconducting SWNTs with only a few (n,m) chiralities in the fraction. This was the first time that chemically separated SWNTs were used for short channel, all-semiconducting SWNT electronics dominant by just a few (n,m)'s. Nevertheless, the results suggest that much improved chemical separation methods are needed to produce nanotube electronics at a large scale.     

Mechanism of ammonia detection by chemically functionalized single-walled carbon nanotubes: in situ electrical and optical study of gas analyte detection

We provide definitive evidence for the mechanism of electronic detection of ammonia by monitoring in situ changes in the electrical resistance and optical spectra of films of poly(m-aminobenzenesulfonic acid)-functionalized SWNTs (SWNT-PABS). The increase of resistance during exposure to ammonia is associated with deprotonation of the PABS side chain that in turn induces electron transfer between the oligomer and the valence band of the semiconducting SWNTs. Near IR spectroscopy is used to demonstrate that the charge transfer is a weakly driven process, and this accounts for the high reversibility of the sensor. We show that the sensitivity of the chemiresistors increases as the film thickness is reduced to the percolation threshold and that the SWNT-PABS film thickness provides a simple means to enhance the electronic response.     

Gas‐free initiators for high‐temperature free‐radical polymerization

Quaternary ammonium persulfates as free‐radical initiators for high‐temperature polymerization are synthesized and their shelf‐life stability investigated. These initiators do not have gaseous byproducts and are therefore ideal for frontal polymerization, a process in which polymeric materials are produced via a thermal front that propagates through the unreacted monomer/initiator solution. Quaternary ammonium persulfate initiators offer additional qualities such as high solubility in organic media and low volatility, which are desirable for frontal polymerization. The initiators are synthesized using two procedures, and the initiating efficacy of the respective products is compared to a peroxide initiator in the frontal polymerization of 1,6‐hexanediol diacrylate. Of all the quartenary ammonium persulfates synthesized, tricaprylmethylammonium (Aliquat) persulfate (APSO) is the best initiator for frontal polymerization because it is soluble in organic media, is very reactive, and does not produce volatile byproducts under decomposition. A study of the decomposition kinetics of APSO is performed, and frontal polymerization is proposed as a quicker analytical technique to assay the purity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3984–3990, 2000     

Radical polymerization of radical-labeled monomers: The triarylmethyl-based radical monomer as an example

Recent development of spin-labeled nitroxide-mediated polymerization (NMP) involving successful polymer preparation with high livingness and narrow dispersity in the presence of persistent trityl-based stable radicals attached to the initiators (90% recovery of a trityl radical signal after the polymerization) led us to the preparation of stable organic radical polymers based on trityl radical-substituted monomers using NMP as the method of polymerization despite the claims in the literature about its expected failure. Here, we present successful radical polymerization and NMP of a trityl radical-based tri- and mono-monomer yielding more than 90% recovery of the trityl radical signal. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2656–2664     

Synthesis and polymerization of 2-butyl-7-methylene-1,4,6-trioxaspiro(4,4)nonane

2-Butyl-7-methylene-1,4,6-trioxaspiro(4,4)nonane ( 7 ) was prepared by the reaction of 2-(bromomethyl)-5-oxo-tetrahydrofuran with 1,2-epoxyhexane, followed by dehydrobromination. Compound 7 could be polymerized by free radical initiators to give a viscous polymer. The IR and NMR spectra of the polymers indicated that the polymer structure contained ester and ketone units in the backbone, and a cyclic acetal side chain. Compound 7 readily copolymerized with acrylonitrile in the presence and absence of radical initiators, but did not copolymerize well with styrene. Ultraviolet spectra suggest that the spontaneous polymerization proceeds via a chargetransfer complex between 7 as an electron donor and AN as an electron acceptor.     

Soluble ultra-short single-walled carbon nanotubes

Soluble, ultra-short (length < 60 nm), carboxylated, single-walled carbon nanotubes (SWNTs) have been prepared by a scalable process. This process, predicated on oleum's (100% H2SO4 with excess SO3) ability to intercalate between individual SWNTs inside SWNT ropes, is a procedure that simultaneously cuts and functionalizes SWNTs using a mixture of sulfuric and nitric acids. The solubility of these ultra-short SWNTs (US-SWNTs) in organic solvents, superacid and water is about 2 wt %. The availability of soluble US-SWNTs could open opportunities for forming high performance composites, blends, and copolymers without inhibiting their processibility.     

Thermally and molecularly stimulated relaxation of hot phonons in suspended carbon nanotubes

The high-bias electrical transport properties of suspended metallic single-walled carbon nanotubes (SWNTs) are investigated at various temperatures in vacuum, in various gases, and when coated with molecular solids. It is revealed that nonequilibrium optical phonon effects in suspended nanotubes decrease as the ambient temperature increases. Gas molecules surrounding suspended SWNTs assist the relaxation of hot phonons and afford enhanced current flow along nanotubes. Molecular solids of carbon dioxide frozen onto suspended SWNTs quench the nonequilibrium phonon effect. The discovery of strong environmental effects on high current transport in nanotubes is important to high performance nanoelectronics applications of 1D nanowires in general.     

The effect of catalyst concentration on the synthesis of single-wall carbon nanotubes

Single wall carbon nanotubes (SWNTs) were synthesized by electric arc discharge method with a mixture of nickel and yttrium as catalysts. The effect of the catalyst concentration on the synthesis of SWNTs was studied. Raman spectra of SWNTs have been recorded with excitation wavelengths from 476.5 to 1064 nm. The Raman peaks of the radial breathing modes (RBM) of SWNTs were assigned. The results indicate that the diameter distribution of SWNTs is in the range of 1.2-1.6 nm, and the SWNTs with diameter 1.43 nm are in the majority. The catalyst concentrations have large effect on the yield of SWNTs and little effect on the diameter distribution of SWNTs.     

Hydrogenation and hydrocarbonation and etching of single-walled carbon nanotubes

We present a systematic experimental investigation of the reactions between hydrogen plasma and single-walled carbon nanotubes (SWNTs) at various temperatures. Microscopy, infrared (IR) and Raman spectroscopy, and electrical transport measurements are carried out to investigate the properties of SWNTs after hydrogenation. Structural deformations, drastically reduced electrical conductance, and an increased semiconducting nature of SWNTs upon sidewall hydrogenation are observed. These changes are reversible upon thermal annealing at 500 degrees C via dehydrogenation. Harsh plasma or high temperature reactions lead to etching of nanotubes likely via hydrocarbonation. Smaller SWNTs are markedly less stable against hydrocarbonation than larger tubes. The results are fundamental and may have implications to basic and practical applications including hydrogen storage, sensing, band gap engineering for novel electronics, and new methods of manipulation, functionalization, and etching of nanotubes.     

Synthesis and polymerization of 8,9-benzo-2-methylene-1,4,6-trioxaspiro[4,4]nonane (BMTN)

8,9-Benzo-2-methylene-1,4,6-trioxaspiro[4,4]nonane (BMTN) was prepared by the reaction of phthalide with epichlorohydrin, followed by dehydrochlorination. BMTN was polymerized with di-t-butyl peroxide (DTBP) to give a solyble polymer with a high molecular weight and good thermal stability. The infrared (IR) and nuclear magnetic resonance (NMR) spectra indicated that the polymer structure contained aromatic ester and ketone in the backbone. T_g and T_m of homopolymer of BMTN were, respectively, 98 and 282°C. BMTN was also readily copolymerized with such vinyl monomers as methyl methacrylate (MMA), acrylonitrile (AN), and maleic anhydride (MA), but not with styrene, in the presence of radical initiators. AN and MA, in particular, were spontaneously copolymerized with BMTN in the absence of radical initiators at 40°C. From the results of ultra violet (UV) spectra it is suggested that spontaneous copolymerization proceeds via a charge-transfer complex between BMTN as an electron donor and AN or MA as an acceptor.     

Recent advances in the synthesis and applications of azo initiators

This mini-review describes recent developments and trends in the area of syntheses and applications of azo compounds, which are planned to act as initiators of radical reactions, particularly polymerizations. The paper reports chemical modifications of well-known initiators (AIBN, etc.) or variants of syntheses of new types of these compounds. The chemical modifications of basic skeletons of azo initiators are discussed in the context with their properties and applications. Also discussed are the contemporary trends in the development of these initiators, particularly in preparation of microparticles and nanoparticles of polymers or hybrid inorganic–organic microparticles and nanoparticles prepared for intentional studies and applications.     

Properties of single‐walled carbon nanotube‐based poly(phenylene vinylene) electroluminescent nanocomposites

Devices with varying concentrations of single‐walled carbon nanotubes (SWNTs) dispersed in three derivatives of poly(p‐phenylene vinylene) are prepared, and their electroluminescent properties evaluated. Increasing the concentration of SWNTs improves the electrical conductivity of the nanocomposites. However, an undesired increase in the electroluminescence (EL) turn‐on voltage is observed for the hybrids, possibly due to photoluminescence quenching of excitons by the SWNTs. At relatively low concentrations of SWNTs, there is an increase in the EL lifetime; in contrast, at relatively high concentrations of SWNTs, due to photoluminescence quenching by the nanotubes, significant reduction in brightness and faster degradation of the EL performance of the devices is observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Structure analyses of dodecylated single-walled carbon nanotubes

Alkylation of nanotube salts prepared using either lithium, sodium, or potassium in liquid ammonia yields sidewall-functionalized nanotubes that are soluble in organic solvents. Atomic force microscopy and transmission electron microscopy studies of dodecylated SWNTs prepared from HiPco nanotubes and 1-iodododecane show that extensive debundling results from intercalation of the alkali metal into the SWNT ropes. TGA-FTIR analyses of samples prepared from the different metals revealed radically different thermal behavior during detachment of the dodecyl groups. The SWNTs prepared using lithium can be converted into the pristine SWNTs at 180-330 degrees C, whereas the dodecylated SWNTs prepared using sodium require a much higher temperature (380-530 degrees C) for dealkylation. SWNTs prepared using potassium behave differently, leading to detachment of the alkyl groups over the temperature range 180-500 degrees C. These differences can be observed by analysis of the solid-state 13C NMR spectra of the dodecylated SWNTs that have been prepared using the different alkali metals and may indicate differences in the relative amounts of 1,2- and 1,4-addition of the alkyl groups.     

CVD growth of single-walled carbon nanotubes with narrow diameter distribution over Fe/MgO catalyst and their fluorescence spectroscopy

Single-walled carbon nanotubes (SWNTs) with a narrow diameter distribution are synthesized by thermal chemical vapor deposition (CVD) of methane over Fe/MgO catalyst on the basis of parametric study considering Fe loading, reaction temperature and time, methane concentration, and structure of a support material. We found that the porous MgO support gives the SWNTs with a narrow diameter distribution with the mean diameter and standard deviation of 0.93 and 0.06 nm, respectively, only when the Fe loading and reaction temperature are relatively low. The higher Fe loading and/or the higher reaction temperature enlarged the nanotube diameter, forming double-walled carbon nanotubes (DWNTs) in addition to SWNTs. This result indicates that only the diameter of Fe nanoparticles determines the growth of either SWNTs or DWNTs on the MgO support. The fluorescence and absorption spectra of the nanotube dispersion in D(2)O solution with sodium dodecyl sulfate (SDS) were studied to identify their chirality distribution. The fluorescence of the uniform-diameter SWNTs indicates the formation of the near armchair structures. On the other hand, the SWNTs synthesized over the catalyst with a high Fe loading, 3 wt %, showed a wide chirality distribution including the near zigzag structure. The synthesis of the SWNTs with a narrow diameter distribution could be applied to the selection of SWNTs with a specific chirality based on postsynthesis separation.     

Changes in the fluorescence spectrum of individual single-wall carbon nanotubes induced by light-assisted oxidation with hydroperoxide

Through fluorescence-spectrum measurements, we investigated the effects of light-assisted oxidation with H2O2 (LAOx) on single-wall carbon nanotubes (SWNTs) that were individually dispersed in an aqueous solution of surfactant. The intensities of the fluorescence spectra were decreased remarkably by the LAOx when the light's wavelength was 400-500 nm and a little when 600-700 nm. The spectrum intensity did not recover even when the pH was restored to an original value of 6.5. The spectra changed little when the LAOx wavelength was 500-600 nm or the light was not irradiated. In addition, the effect of LAOx on SWNTs was related to the diameters of SWNTs. We inferred that these phenomena reflected that H2O2 was dissociated by absorbing the fluorescence light emitted from optically excited SWNTs, which, in turn, accelerated the burning out of SWNTs.