Fe、N共掺杂TiO2纳米管阵列的制备及可见光光催化活性

应用电化学阳极氧化法结合浸渍和退火后处理制备了Fe和N共掺杂的TiO2纳米管阵列光催化剂,并用场发射扫描电镜(FESEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和俄歇电子能谱(AES)仪对其进行了表征.结果表明,Fe、N共掺杂对TiO2纳米管阵列的形貌和结构没有明显影响,Fe和N均掺入了TiO2晶格.紫外-可见(UV-Vis)漫反射光谱显示Fe和N共掺杂TiO2纳米管阵列的吸收带边较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列红移,可见光吸收增强.以可见光催化降解罗丹明B(RhB)考察了材料的光催化活性,Fe和N共掺杂TiO2纳米管阵列对RhB的降解速率较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列明显提高,证明了Fe、N共掺杂产生的协同效应提高了TiO2纳米管阵列在可见光照射下的光催化活性.     

Fe_2O_3/TiO_2纳米管阵列的制备及其光催化性能

在钛基体上采用阳极氧化法制备了TiO2纳米管阵列,采用化学浴方法在TiO2纳米管阵列上修饰了Fe2O3纳米颗粒。利用扫描电镜、X射线衍射和紫外可见漫反射光谱等手段对材料进行了表征,同时测试了材料的光电化学性能及其光催化降解亚甲基蓝染料废水的性能。结果表明,Fe2O3纳米颗粒的修饰将TiO2纳米管阵列的光响应拓宽至可见光区域,提高了光电流,Fe2O3/TiO2纳米管阵列的光电流是未修饰的TiO2纳米管阵列的9倍。而在光催化反应中,亚甲基蓝最高降解率可达80%,比未修饰的TiO2纳米管阵列高出30%。     

氧化钛纳米管阵列制备及形成机理

采用电化学阳极氧化法在HF水溶液体系使纯钛表面形成一层结构规整有序的高密度TiO2纳米管阵列,考察了几种主要的实验参数（阳极氧化电压、温度、时间、电解液浓度）对TiO2纳米管阵列形貌和尺寸的影响.结果表明,阳极氧化电压是影响氧化钛形貌和纳米管尺寸的最主要因素,而温度和电解液浓度只影响TiO2纳米管阵列形成的时间.对TiO2纳米管阵列进行X射线衍射（XRD）和扫描电子显微镜（SEM）的分析,初步表征了TiO2纳米管阵列的电学性质.并讨论了TiO2纳米管的形成机理.     

TiO2纳米管阵列制备及其电化学嵌锂性能研究

本文研究了TiO2纳米管阵列制备及其嵌锂电化学性能.采用阳极氧化法制备了TiO2纳米管阵列.利用XRD、SEM、恒电流充放电、CV、EIS等手段.对所制备TiO2纳米管阵列的结构、形貌进行了分析表征及电化学性能测试.实验结果表明,制备出的TiO2纳米管阵列薄膜具有很好的循环性能.首次嵌锂容量达73.3 μAh·cm-2...     

阳极氧化条件对氧化钛纳米管阵列形貌及光催化性能的影响

以阳极氧化法制备了高度有序的TiO2纳米管阵列,采用扫描电镜观察了不同制备条件下得到的TiO2纳米管阵列的微观形貌,分别考察了电解时间、电压、电解液组成对TiO2纳米管阵列形貌的影响;此外,以酸性红3R染料作为标志物,测定了制得的TiO2纳米管阵列片的光催化性能.结果表明,以0.5%NH4F(质量分数)和乙二醇与水按体积比5∶1混合得到的溶液作为电解液,在15V电压下电解2h,得到的TiO2纳米管阵列的纳米管管径适中(60nm)、大小均一、排列整齐.所制备的TiO2纳米管阵列对染料的降解率显著优于纳米TiO2水溶胶的,且其光催化性能与形貌、电解时间及煅烧温度等密切相关.     

淬火处理对TiO2纳米管阵列电极性能影响

为使TiO2纳米管阵列电极更好地应用于太阳能电池中,通过恒压阳极氧化法以0.5%(w,质量分数)NH4F/甘油作为电解液,在钛基体上制备出了TiO2纳米管阵列.随后将TiO2纳米管阵列电极在水中进行不同温度淬火处理,通过x射线衍射(XRD)仪、场发射扫描电子显微镜(FESEM)、X射线光电子能谱(XPS)和循环伏安法(CV)研究经淬火处理的TiO2纳米管阵列的形貌、晶体结构和电化学性能.研究得出TiO2纳米管阵列经淬火处理其表面获得更多Ti3+缺陷点和TiO2纳米碎片.经0℃淬火处理的TiO2纳米管阵列电极出现了更多Ti3+缺陷点和OH基团,且有更多的纳米碎片出现,其光电化学性能得到了大幅度提高,其40 min光照对甲基橙的光催化降解率高达96.2%.     

淬火处理对TiO2纳米管阵列电极性能影响

为使TiO2纳米管阵列电极更好地应用于太阳能电池中, 通过恒压阳极氧化法以0.5%(w, 质量分数)NH4F/甘油作为电解液, 在钛基体上制备出了TiO2纳米管阵列. 随后将TiO2纳米管阵列电极在水中进行不同温度淬火处理, 通过X射线衍射(XRD)仪、场发射扫描电子显微镜(FESEM)、X射线光电子能谱(XPS)和循环伏安法(CV)研究经淬火处理的TiO2纳米管阵列的形貌、晶体结构和电化学性能. 研究得出TiO2纳米管阵列经淬火处理其表面获得更多Ti3+缺陷点和TiO2纳米碎片. 经0 ℃淬火处理的TiO2纳米管阵列电极出现了更多Ti3+缺陷点和OH 基团, 且有更多的纳米碎片出现, 其光电化学性能得到了大幅度提高, 其40 min光照对甲基橙的光催化降解率高达96.2%.     

阳极氧化法制备TiO_2纳米管阵列膜及其应用

由阳极氧化法制备的TiO2纳米管阵列,因其独特的有序结构而显示出优异的性能,在许多领域有着广泛的应用,成为一种很有发展前景的新型纳米结构材料。本文简要综述了制备TiO2纳米管阵列结构的方法及其应用研究进展。在比较了当前几种制备TiO2纳米管阵列方法的优缺点后,重点讨论了阳极氧化法制备TiO2纳米管阵列结构过程中,如何通过调整工艺参数来实现此类纳米管阵列结构的可控生长。最后评述了TiO2纳米管阵列材料研究的发展趋势和应用前景。     

电化学阻抗谱法研究铈改性TiO2纳米管阵列光电极裂解水产氢动力学

通过阳极氧化法在纯钛板上制备TiO2纳米管阵列电极.在光电化学电解池阳极中加入供电子物质乙二醇,显著减小了TiO2纳米管的电荷传递阻抗,促进了光电催化裂解水产氢反应.采用阴极电沉积和阳极氧化法制备了单质铈和氧化铈共同改性的TiO2纳米管阵列半导体光阳极,其平带电位向电负方向移动.采用电化学阻抗谱法(EIS)对改性后TiO2纳米管阵列在光电催化裂解水产氢中的电子传输性能以及界面性质进行了表征,确定了各阻抗弧对应的电极过程.采用合理的等效电路模型计算了电极的电子传输动力学参数.结果表明,经铈改性后的TiO2纳米管阵列膜电阻明显减小,有利于氢气的产生.探讨了单质铈与氧化铈促进TiO2纳米管阵列电荷传输的作用机理.     

甘油-DMSO-H2O中阳极氧化TiO2纳米管阵列的生长与性能

采用NH4F-甘油-DMSO(二甲基亚砜)-H2O溶液体系的电化学阳极氧化法, 在金属钛基板上形成厚度为0.4-1.5 μm的有序TiO2纳米管阵列薄膜. 利用场发射电子扫描显微镜(FESEM)技术, 研究了电解液的组成及阳极氧化电压对TiO2纳米管阵列生长形貌的影响. 结果表明, 阳极氧化电压可以影响TiO2纳米管的径向尺寸和长度；通过改变电解液中DMSO/H2O的体积比, 能够调控纳米管的生成速率与形貌. 利用X射线衍射(XRD)对经过不同温度热处理的TiO2纳米管阵列薄膜的物相进行了分析. TiO2纳米管阵列薄膜的光电催化分解水过程的电压-电流特性测量显示, 光电流密度大于0.2 mA·cm-2.     

Effect of the displacement reaction on the composition of the magnetic layer in electrodeposited layered nanostructures Co-Cu/Cu and Ni-Cu/Cu

Methods of stripping voltammetry, quartz microgravimetry, and x-ray-fluorescence analysis are employed to explore the copper displacement process on thin electrodeposited layers of pure cobalt and nickel and on deposits of these metals with inclusions of copper. The displacement reaction proceeds at a considerable rate on cobalt in the sulfate and sulfosalicylate solutions and virtually does not proceed on nickel in both the sulfate or sulfate-chloride solutions. An estimate of the rate of the copper displacement reaction following a change in the concentration of copper ions in the solution and in the pH of the sulfosalicylate solution is given. A decrease in the contact exchange rate is facilitated by a decrease in the concentration of copper ions in solution and their participation in the formation of complexes.     

Calibration methods for microdialysis sampling in vivo: muscle and adipose tissue

Calibration methods for microdialysis sampling were studied in the muscle and adipose tissue of rats. Both the delivery method and the no-net-flux method were used to determine the extraction efficiency (EE) of acetaminophen and caffeine in both tissues. There was no concentration dependence of the EE either in vitro or in vivo for either acetaminophen or caffeine. The EEs determined by the delivery and no-net-flux methods were not different. However, the EEs of both caffeine and acetaminophen determined in vitro were significantly higher than those determined in the muscle and adipose. This indicates that mass transfer in the tissue is the rate-determining factor for the EE in vivo. The relative difference between the EE in vitro and the EE in the muscle was smaller than the difference between the EE in vitro and the EE in the adipose. In addition, the EE in the muscle decreased more than the EE in the adipose after the animal was euthanized. This indicated that exchange between the extracellular fluid and plasma is the rate-determining step in mass transport relative to microdialysis sampling. This has a more significant effect on the EE in the muscle than the EE in the adipose. Both the delivery and no-net-flux methods can be used to calibrate microdialysis probes in the muscle and adipose.     

An Evidence-Based Review of Application Devices for Nitric Oxide Concentration Determination from Exhaled Air in the Diagnosis of Inflammation and Treatment Monitoring

The measurement of nitric oxide (NO) in exhaled air is used in diagnostics and monitoring the pathologies not only in the respiratory system but also in the oral cavity. It has shown a huge increase in its level in asthma and diseases of the oral cavity. It seems reasonable to undertake research on the impact of inflammation on the level of NO in exhaled air. The aim of the study is to make an evidence-based review of the application of NO levels in exhaled air in the diagnosis of inflammation and treatment monitoring on the basis of selected measuring devices. Methods and Results: This paper presents an example of the application of NO measurement in exhaled air in individual human systems. Selected measuring devices, their non-invasiveness, and their advantages are described. Discussion: The usefulness of this diagnostic method in pathologies of the oral cavity was noted. Conclusions: Measuring the level of NO in exhaled air seems to be a useful diagnostic method.     

Analytical strategies to determine antibiotic residues in fish

The accelerated growth of aquaculture has resulted in a series of harmful effects to human health. The widespread and unrestricted use of antibiotics in this industry, to prevent bacterial infections, leads to remaining amounts in the aquatic environment. This has resulted in the emergence of antibiotic-resistant bacteria in aquaculture environments, in the increase in antibiotic resistance in fish pathogens as well as in the transfer of these resistance determinants to human pathogens. Moreover, the use of large amounts of antibiotics may lead to the presence of residual antibiotics in fish tissue and fish products. Fluoroquinolones, tetracyclines, penicillins, sulphonamides and other antibiotics, exhibiting activity against both Gram-positive and Gram-negative bacteria, are widely used for the treatment and prevention of diseases in fish. An extended and comprehensive review on the recent analytical methodologies concerning antibiotic residues in fish reported in the literature is provided in the present article. Emphasis is given on sample preparation regarding isolation and purification, chromatographic conditions and method validation according to legislation. Results of published assays are comparatively presented and criticised.     

Effect of pulp composition on the characteristics of residuals in CMC made from such pulps

Four different spruce sulphite pulp samples were used for the preparation of carboxymethylcellulose (CMC). The characteristics of the unreacted fibre and particle residuals obtained in the CMC-preparation were used to establish a correlation between the hemicellulose in the pulp and the intrinsic viscosity, i.e.,␣cellulose chain length and the occurence of unreacted residuals. It was shown that the residual particles in the CMC consisted of fibres, fibre fractions and gel particles of different degrees of substitution. The results suggested that pulps with long cellulose chains, i.e., pulps with high intrinsic viscosities, resulted in particles that were more substituted and more swollen. These pulps also resulted in more substituted hemicelluloses in the CMC and more substituted residuals. It was also suggested that galactoglucomannan in the cellulose pulps is favourable for the swelling which results in more substituted hemicelluloses in the CMC and more swollen residuals. The amount of residuals was influenced mainly by the characteristics of the cellulose in the pulp. It is therefore believed that a combination of high viscosity and a suitable combination of hemicelluloses is the most favourable way of eliminating the occurrence of undissolved residuals in CMC.     

青藏高原湖泊影响锂元素迁移和富集的矿物、元素及环境因素——以西藏郭扎错钻孔沉积物为例

作为我国战略性矿产的锂矿,主要赋存于青藏高原盐湖中。湖泊系统中,锂的富集和迁移规律关系到锂矿的高效提取和未来锂矿的储量估算。本文以西藏咸水湖郭扎错的钻孔沉积物为例,结合AMS14C年代和Mg元素含量变化,系统分析了孔隙水、碳酸盐矿物和硅酸盐矿物的锂含量变化,探讨了矿物、镁元素、环境变化和早期成岩作用等对锂元素迁移和富集的影响。郭扎错沉积物中锂和镁大部分存在于硅酸盐矿物中,锂和镁较高的相关性说明二者存在于相同的硅酸盐矿物中,如粘土矿物。大约90%的锂赋存在硅酸盐矿物中,约8.5%的锂赋存在碳酸盐矿物中,孔隙水中的锂含量占比仅约1.5%。碳酸盐矿物中Mg/Li摩尔比值为78–270,是孔隙水中10多倍,而硅酸盐矿物中的Mg/Li摩尔比值稳定在24–29之间。水–沉积物相互作用促进硅酸盐矿物中锂的释放,咸水环境下释放的锂多于淡水环境下。碳酸盐矿物中,锂和镁主要存在于方解石中。镁离子对锂离子的迁移具有阻碍作用,低温、高盐度下的阻碍作用更强。湖泊沉积物可能是湖水锂的一个重要来源。     

Electrophoretic studies for determining soy proteins–xanthan gum interactions in foams

The aim of this work was to elucidate soy proteins–xanthan gum interactions at a molecular level by studying protein composition at the air–water interface of foams and in the solutions used to make them and to see if the different properties of heat denatured protein were reflected in the proportions in which they were present at the interface or in the ability to interact with xanthan. To this end SDS-PAGE and densitometry was employed. Initial protein concentration and xanthan influenced the composition of proteins in the solutions used to make the foams. The increase in NSP concentration of solutions (0.5–6 wt.%) in the absence of xanthan promoted the formation of aggregates of low molecular weight (160 kDa), the association of A an B polypeptides and a decrease in and ′ subunits. As DSP concentration of solutions increased, an increase in the proportion of aggregates of high molecular weight (above 200 kDa) and B-polypeptide was observed. On addition of xanthan (0.025 and 0.05%) to protein solutions (0.5 and 2%), the formation of aggregates of high molecular weight was favoured for both NSP and DSP. In the absence of xanthan, no preferential adsorption of soy polypeptides was observed at the air–water interface of NSP foams. However in DSP foams, there was a preferential adsorption of B-polypeptides. Xanthan present in NSP foams (0.5 or 2%), caused an increase in the proportion of aggregates of high molecular weight at the interface as compared with the composition of solutions used to make the foams. An increase in proportion of AB-polypeptides (for 0.5% NSP and 0.025% xanthan) and B-polypeptides together with polypeptides of molecular weight lower than 14 kDa (for 0.5% NSP and 0.05% xanthan) was also observed at the interface in NSP foams. On the contrary, the presence of xanthan in DSP foams caused a decrease in the proportion of aggregates of high molecular weight and a concomitant increase in B-polypeptide. The B-11S polypeptide predominated the interface of DSP foams probably for its hydrophobicity and basic characteristics.     

Matrix-assisted laser desorption/ionization mass spectrometry for the characterization of ionic liquids and the analysis of amino acids, peptides and proteins in ionic liquids

Ionic liquids are interesting solvents for a number of applications in chemistry and biotechnology. We characterized five different ionic liquids by laser desorption/ionization (LDI) and by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) and studied the analysis of amino acids, peptides and proteins dissolved in these solvents. Signals of both anions and cations of the ionic liquids could be observed both in LDI- and in MALDI-MS. In the latter case, adduct formation between anions and cations of the analytes was observed. Amino acids, peptides and proteins could be analyzed in ionic liquids after addition of matrix substances. Sodium and potassium adducts were not observed in any analysis involving ionic liquids. Low molecular mass compounds and peptides could be analyzed best in the presence of water-immiscible ionic liquids, whereas proteins gave the best results in water-miscible ionic liquids. Optimal analysis conditions such as molar matrix-to-analyte and ionic liquid-to-matrix ratios were determined. Homogeneity of samples in the presence of ionic liquids was reduced compared with classical MALDI preparations. Relative quantitation of amino acids was possible using isotope-labeled internal standards. MALDI-MS thus can be used for the analysis of chemical reactions and the screening of enzyme-catalyzed reactions in ionic liquids and for the analysis of the biocatalysts dissolved in these solvents. Theoretical aspects of ion formation in the presence of ionic liquids both in LDI and MALDI analysis are discussed.     

GC-MS analysis of penta- and tetra-cyclic triterpenes from resins of Pistacia species. Part II. Pistacia terebinthus var. Chia

Pistacia species contain oleoresins with bioactive triterpenes. In this study triterpenes, including minor components, were identified and quantified in both neutral and acidic fractions of Pistacia terebinthus var. Chia resin, grown exclusively in Chios island (Greece), collected traditionally, as well as using stimulating agents (liquid collection). It was proved that these two resin samples were composed of several different minor triterpenes, while major constituents were similar but in different proportions. Compounds that differentiated two resin samples of P. lentiscus and P. terebinthus var. Chia, both traditionally collected, were detected, in order to identify the nature of resins present in archaeological materials. In the traditionally collected resin, 37 triterpenes were identified, 12 in the acidic and 25 in the neutral fraction. In the liquid collection resin 10 compounds were identified in the acidic and 23 in the neutral fraction, while 16 compounds were not contained in the traditionally collected resin. The main triterpenes in both resin samples collected traditionally and using stimulating agents were: isomasticadienonic acid (23.6 and 26.3% w[sol ]w of the triterpenic fraction, respectively), 28-norolean-17-en-3-one (16.3 and 17.5% w[sol ]w of the triterpenic fraction, respectively) and masticadienonic acid (5.8 and 6.0% w[sol ]w of the triterpenic fraction). In this study the qualitative and quantitative composition of triterpenes was compared in the Pistacia lentiscus and P. terebinthus var. Chia resin samples collected with the traditional and new liquid techniques, and also triterpenes in resins of P. terebinthus obtained by the traditional technique and using stimulating agents. The aim of the study was also to examine whether the collection technique influenced the triterpenes contained in P. terebinthus var. Chia resin samples.     

Butyltin compounds in severn sound,lake huron,canada

Severn Sound is a heavily used recreational and beating area in the southeast corner of Georgian Bay, Lake Huron, Canada. Because of the concern over the possible release of tributyltin species (TBT) from antifouling paints on boat hulls and marinas, surveys were carried out in 1989 and 1992 to determine the presence of this species and its degradation products dibutyltin (DBT) and monobutyltin (MBT) in this area. Many fish (pike and young–of–the–year spottail shiners) and sediment samples collected in 1989 contained detectable levels of TBT. A maximum concentration of TBT was recorded in northern pike in the spring to be 240 ng Sn g^?1. Maximum levels occurred in marinas during the beginning of the boating season and significantly reduced during the summer and early autumn, although the maximum value of TBT in sediment (392 ng Sn g^?1) was observed in the summer of 1989. The seasonal variation of TBT levels was further substantiated in the subsequent 1992 study, in which sediments from three areas in a marina were sampled at monthly intervals from May to October. TBT levels were much higher in May and then generally decreased with time. Mussels (Elliptio complanta) caged in the marina for three months also contained TBT. DBT was frequently detected in the sediments but less frequently in fish and mussels. MBT was generally below detection limits. Plants (macrophytes and cladophora) contained very small amounts of butyltin compounds.