负载型纳米非贵金属催化剂上CO的氧化行为Ⅱ.纳米铜的制备、结构及催化性能

用惰性气体蒸发法和电弧等离子体法制备了纳米铜粒子，用物理干法将其担载到载体上，并用于催化ＣＯ氧化反应。用ＴＥＭ，ＸＲＤ，ＳＥＭ对纳米粒子和催化剂进行了表征。结果表明，载体，氧化气氛及制备工艺均影响催化剂的活性，稀土元素铈的存在能提高铜的催化活性，纳米铜在催化过程中将转变为氧化物。     

负载型贵金属纳米粒子作为光/超声催化剂在化学合成和降解污染物方面的应用

综述了Au/TiO2、Au/ZrO2、Ag/AgCl等负载型贵金属纳米粒子作为有效的光/超声催化剂在化学合成和降解污染物方面的应用.负载型贵金属纳米粒子能够有效地将太阳能转化为化学能.在紫外光或可见光的辐照下,负载型贵金属纳米粒子能够催化一系列的选择性化学转化,如醇类化合物氧化为醛/酮类化合物、硫醇氧化为二硫化合物、苯氧化为苯酚、硝基苯类化合物还原为偶氮化合物等.在超声波辐射下,负载型贵金属纳米粒子能够有效地催化分解水产氢.此外,在紫外光或可见光的辐照下,负载型贵金属纳米粒子能够有效地催化降解多种污染物,如醛类、醇类、酸类、酚类化合物和染料等.在超声波辐射下,负载型贵金属纳米粒子也能够有效地催化降解包括染料在内的有机污染物.     

超声法制备掺钡纳米氧化镁及其负载钌基氨合成催化剂的催化性能

采用超声技术制备掺钡纳米氧化镁,并以其为载体,以Ru3(CO)12 为前驱体,采用浸渍法制备了一系列钌基氨合成催化剂. 采用场发射扫描电镜、 X射线衍射和N2物理吸附等表征手段,考察了催化剂的表面形貌、物相和表面织构性质. 在400～450 ℃的条件下评价了催化剂对氨合成的催化活性. 结果表明,以超声技术制备的掺钡纳米氧化镁有较大的比表面积和较规则的孔道结构,并增强了钡、镁之间的相互作用,使钡更均匀地分散于载体中,极大地提高了钡的促进作用,从而使其负载的钌基催化剂的活性大幅度提高. 当超声作用为时间30 min时,在10 MPa, 425 ℃和空速 10 000 h-1 的条件下, 4%Ru/Ba-MgO催化剂上的氨合成反应速率达到61.02 mmol/(g·h).     

负载型纳米非贵金属催化剂上CO的氧化 Ⅰ.纳米催化剂活性组分的制备、表征与筛选

用电弧等离子体法制备了纳米Ｃｕ、Ｃｒ、Ｍｎ、Ｆｅ、Ｎｉ，采用机械方法将其加到Ａｌ２Ｏ３载体上，制成负载型纳米催化剂．用ＴＥＭ、ＳＥＭ、ＸＲＤ、ＨＲＴＥＭ等手段，对纳米粒子和催化剂进行了表征．对ＣＯ催化氧化的结果表明，铜催化剂的活性最高；铜、铬催化剂的活性高于贵金属钯催化剂；锰催化剂活性与钯相当；铁、镍催化剂活性较差．ＸＲＤ实验表明，催化反应后，纳米金属将变成氧化物．     

纳米碳管负载金属镍催化叶绿素加氯反应

用等体积浸渍法制备了纳米碳管负载金属镍催化剂，采用电镜（TEM）、红外光谱（IR）对催化剂的形貌、结构进行了表征，并考察了常温常压下不同Ni负载量的催化剂对叶绿素加氢反应的性能。结果表明，纳米碳管负载镍催化剂在催化反应过程中保持高分散态，不会发生团聚，而经过硝酸氧化后的纳米碳管负载镍催化剂在催化反应中表现出高的活性，当Ni负载量为7％时，催化活性最好，叶绿素分子开环生成各种小分子。     

负载型纳米非贵金属催化剂上CO的氧化行为Ⅱ.纳米铜的制备、结构及催化性能

用惰性气体蒸发法和电弧等离子体法制备了纳米铜粒子，用物理干法将其担载到载体上，并用于催化ＣＯ氧化反应．用ＴＥＭ，ＸＲＤ，ＳＥＭ对纳米粒子和催化剂进行了表征．结果表明，载体、氧化气氛及制备工艺均影响催化剂的活性，稀土元素铈的存在能提高铜的催化活性，纳米铜在催化过程中将转变为氧化物．     

负载型纳米金催化葡萄糖氧化研究进展

正近年来,负载型金催化剂已广泛应用于催化各类氧化反应,如CO氧化[1-2]、水煤气转换反应[3-4]、醇醛的选择性氧化[5-7]、过氧化氢合成[8]、挥发性有机物催化燃烧等[9].同时,负载型金属催化剂(Pt、Pd)已应用于催化葡萄糖氧化制备葡萄糖酸盐,但在催化反应过程中易发生催化剂钝     

负载型纳米贵金属催化剂催化吡啶及其衍生物的加氢反应

 制备了负载型高分散的纳米贵金属催化剂和含Ru的双金属催化剂,并考察了催化剂对吡啶及其衍生物加氢反应的催化性能. 结果表明, 5%Ru/C催化剂对吡啶加氢反应的催化活性高于5%Pd/C, 5%Pt/C和5%Ir/C. 在100 ℃, 3.0 MPa, 1 h和Ru/吡啶摩尔比=2.5/1000 的条件下, 5%Ru/C催化吡啶加氢的转化率大于99.9%, 生成哌啶的选择性为100%. 催化剂重复使用5次后,活性和选择性无明显下降. 在Ru催化剂中加入少量的Pd和Ir后催化剂活性没有明显的变化. 采用X射线衍射、高分辨透射电镜和X射线光电子能谱对还原后的5%Ru/C催化剂进行表征,结果表明Ru以高分散金属态存在,其平均粒径小于5 nm. 不同底物的加氢反应活性为: 吡啶≈2-甲基吡啶>2,6-二甲基吡啶>3-甲基吡啶>4-甲基吡啶>3,5-二甲基吡啶>2-甲氧基吡啶.     

涂覆在堇青石上的负载贵金属催化剂催化氧化甲醛的性能研究

将催化性能优异的负载贵金属催化剂与拟薄水铝石(Al OOH)溶胶混合,制备得到均匀的料浆,采用料浆涂覆法将其负载到堇青石蜂窝陶瓷基体上,考察了Al OOH含量对涂层形貌、负载量、涂层牢固度的影响,并对合成的整体式催化剂进行催化氧化甲醛性能测试。结果表明,合成的负载贵金属催化剂Pt粒子粒径为1.14nm时,可在17℃完全降解甲醛;涂覆过程中Al OOH含量越高,载体负载量越大,但过高易导致孔道堵塞,涂覆不均和涂层龟裂;超声振荡测试表明,Al OOH含量对涂层牢固度影响不大,当Al OOH含量为8(wt)%时,负载型蜂窝陶瓷的催化效果和涂覆效果最佳,可以在60℃下完全降解甲醛。     

有序多孔过渡金属氧化物及其负载贵金属催化剂对挥发性有机物氧化的催化性能

大部分的挥发性有机物(VOCs)污染环境,危害人身健康.目前,我国虽然已开展了治理 VOCs污染的工作,但还缺乏有效的、拥有自主知识产权的 VOCs治理技术,因此研发新型高效 VOCs处理技术迫在眉睫.催化氧化法是公认的最有效消除 VOCs的途径之一,而高性能催化剂的研发是实现该过程的关键.近年来,人们围绕消除 VOCs的高效且价廉的催化剂的研发开展了卓有成效的工作,许多过渡金属氧化物、混合或复合金属氧化物及其负载贵金属催化剂均被认为是有效的催化氧化材料.与体相材料相比,多孔材料具有发达的孔道结构和高的比表面积,一方面有利于反应物的扩散、吸附和脱附,因而具有更高的催化活性和选择性;另一方面有利于活性组分(如贵金属等)在多孔材料表面的高分散,抑制活性组分的烧结,因而具有更好的催化稳定性.本文简述了近年来多孔金属氧化物在环境污染物消除领域的研究进展,阐述了以有序介孔或大孔过渡金属氧化物、钙钛矿型氧化物和负载贵金属催化剂的制备及其对典型 VOCs(如苯系物、醇类、醛类及酮类等)氧化的催化性能,重点介绍了四类催化材料,包括有序介孔过渡金属氧化物或复合氧化物(Co3O4, MnO2, Fe2O3, Cr2O3和 LaFeO3等)催化剂,有序介孔金属氧化物负载贵金属(Au/Co3O4, Au/MnO2和 Pd/Co3O4等)催化剂,三维有序大孔过渡金属氧化物或复合氧化物(Fe2O3, LaMnO3, La0.6Sr0.4MnO3和 La2CuO4等)催化剂,以及三维有序大孔金属氧化物负载贵金属(Au/Co3O4, Au/LaCoO3, Au/La0.6Sr0.4MnO3和 AuPd/Co3O4等)催化剂的制备及其物化性质与对苯、甲苯、二甲苯、乙醇、丙酮、甲醛、甲烷或氯甲烷等 VOCs氧化的催化性能之间的相关性.借助二氧化硅或聚甲基丙烯酸甲酯微球等硬模板,采用纳米浇铸法可制备出二维或三维的有序单一或多级孔道结构的金属氧化物.研究表明,多孔金属氧化物的催化性能远优于其体相甚至纳米催化剂的.有序多孔材料的优异催化性能与其拥有大的比表面积、高的吸附氧物种浓度、优良的低温还原性、独特的孔道结构、活性组分的高分散以及贵金属与氧化物载体之间的强相互作用等有关.探明影响催化剂活性的因素有利于从原子水平上认识催化过程,为新型高效催化剂的设计与制备奠定基础.本文还指出了此类研究中存在的一些问题,例如利用硬模板法制备多孔材料的缺点是目标催化剂的收率低,硬模板浪费严重,大规模制备多孔催化剂势必增加制备成本,这些问题有待于妥善解决.与此同时,还展望了 VOCs消除技术的未来发展趋势,采用多种技术联用的方法有望最大程度地提高 VOCs的消除效率.     

Supported noble metal nanoparticles as photo/sono-catalysts for synthesis of chemicals and degradation of pollutants

This review summarizes the utilization of supported noble metal nanoparticles (such as Au/TiO2, Au/ZrO2, Ag/AgCl) as efficient photo/sono-catalysts for the selective synthesis of chemicals and degradation of environmental pollutants. Supported noble metal nanoparticles could efficiently catalyze the conversion of solar energy into chemical energy. Under UV/visible light irradiation, important chemical transformations such as the oxidation of alcohols to carbonyl compounds, the oxidation of thiol to disulfid...     

Catalytic methanation reaction over alumina supported cobalt oxide doped noble metal oxides for the purification of simulated natural gas

A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.     

基于贵金属纳米颗粒生长的比色传感研究进展

近年来,作为颜色标记和信号发生器的贵金属纳米粒子由于其简单性和实用性而被广泛用于比色测定和传感的研究当中。本文综述了近十年基于贵金属纳米粒子生长的比色传感器策略和应用的最新进展,总结了基于贵金属纳米颗粒生长的单色及多色传感器的传感原理、分类及前沿应用,探索了其比色传感的信号产生、分类和放大机制。由于贵金属纳米粒子在不同尺寸、距离、形状、成分等基底上的生长会产生不同的LSPR共振峰以及显著的传感信号变化,我们详细讨论了贵金属纳米粒子在金纳米棒等晶种基底上生长的比色传感。最后,我们对目前该比色传感面临的挑战和未来前景进行了展望。     

Sustainable green catalysis by supported metal nanoparticles

The recent progress of sustainable green catalysis by supported metal nanoparticles is described. The template synthesis of metal nanoparticles in ordered porous materials is studied for the rational design of heterogeneous catalysts capable of high activity and selectivity. The application of these materials in green catalytic processes results in a unique activity and selectivity arising from the concerted effect of metal nanoparticles and supports. The high catalytic performances of Pt nanoparticles in mesoporous silica is reported. Supported metal catalysts have also been applied to biomass conversion by heterogeneous catalysis. Additionally, the degradation of cellulose by supported metal catalysts, in which bifunctional catalysis of acid and metal plays the key role for the hydrolysis and reduction of cellulose, is also reported. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 224–235; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900004     

Dehydrogenation of 2-propanol with suspended noble metal catalysts: activity enhancement by the addition of sodium hydoxide

Catalytic dehydrogenation of 2-propanol was carried out in the presence of suspended Rh/C, Ru/C, Pd/C, Pt/C or Pt/Al₂O₃ under boiling and refluxing conditions. Adding NaOH to the 2-propanol enhanced the H₂ evolution rate by a factor of 1.06-52.9, depending on the catalyst. The activity enhancements observed with KOH, Mg(OH)₂, Ca(OH)₂ and NaHCO₃ were lower than those with NaOH. This revised version was published online in August 2006 with corrections to the Cover Date.     

A noble interaction: An assessment of noble gas binding ability of metal oxides (metal = Cu,Ag, Au)

An in silico study is performed on the structure and the stability of noble gas (Ng) bound MO complexes (M = Cu, Ag, Au). To understand the stability of these Ng bound complexes, dissociation energies, dissociation enthalpy, and dissociation free energy change are computed. The stability of NgMO is also compared with that of the experimentally detected NgMX (X= F, Cl, Br). It is found that MO has lower Ng binding ability than that of MX. All the dissociation processes producing Ng and MO are endothermic in nature and for the Kr‐Rn bound MO (M = Cu, Au), and Xe and Rn bound AgO cases, the corresponding dissociation processes are turned out to be endergonic in nature at standard state. The Wiberg bond indices of Ng? M bonds and Ng→M electron transfer gradually increase from Ar to Rn and for the same Ng they follow the order of NgAuO > NgCuO > NgAgO. Energy decomposition analysis shows that the Ng? M bonds in NgMO are partly covalent and partly electrostatic in nature. Electron density analysis further highlights the partial covalent character in Ng? M bonds. © 2016 Wiley Periodicals, Inc.