Hyperbranched polyurethanes with varying spacer segments between the branching points

Hyperbranched polyurethanes, with varying oligoethyleneoxy spacer segments between the branching points, have been synthesized by a one-pot approach starting from the appropriately designed carbonyl azide that incorporates the different spacer segments. The structures of monomers and polymers were confirmed by IR and ¹H-NMR spectroscopy. The solution viscosity of the polymers suggested that they were of reasonably high molecular weight. Reversal of terminal functional groups was achieved by preparing the appropriate monohydroxy dicarbonyl azide monomer. The large number of terminal isocyanate groups at the chain ends of such hyperbranched macromolecules caused them to crosslink prior to its isolation. However, carrying out the polymerization in the presence of 1 equiv of a capping agent, such as an alcohol, resulted in soluble polymers with carbamate chain ends. Using a biphenyl-containing alcohol as a capping agent, we have also prepared novel hyperbranched polyurethanes with pendant mesogenic segments. These mesogen-containing polyurethanes, however, did not exhibit liquid crystallinity probably due to the wholly aromatic rigid polymer backbone. © 1996 John Wiley & Sons, Inc.     

Synthesis and opto‐electrical properties of dendron‐containing poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives

A new series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives containing dendritic side groups were synthesized. Different generations of dendrons were integrated on the pendant phenyl ring to investigate their effect on optical and electrical properties of final polymers. Homopolymers can not be obtained via the Gilch polymerization because of sterically bulky dendrons. By controlling the feed ratio of different monomers during polymerization, dendron‐containing copolymers with high molecular weights were obtained. The UV–vis absorption and photoluminescent spectra of the thin films are pretty close; however, quantum efficiency is significantly enhanced with increasing the generation of dendrons. The electrochemical analysis reveals that hole‐injection is also improved by increasing dendritic generation. Double‐layer light‐emitting devices with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al were fabricated. High generation dendrons bring benefit of improved device performance. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3440–3450, 2007     

Thermal recordable novel cholesteric liquid crystalline polyacrylates containing various chiral moieties

To investigate the effect of spacer length and linkages between the rigid mesogenic core and the terminal group on the molecular interaction and physical properties of polymers, two series of novel side chain liquid crystalline polyacrylates were synthesized. These were composed of liquid crystalline monomers with six or eleven methylene segments as spacers, and chiral monomers end capped with menthyl or cholesteryl groups. Liquid crystalline phases of the polymers were investigated using differential scanning calorimetry and polarized optical microscopy, and confirmed with X‐ray diffractometry. Color image recording of the synthesized polymer films was achieved using a thermal treatment, and then fixed by quenching. This investigation demonstrates that the introduction of carbonate linking groups between the rigid mesogenic core and terminal group decreases both the lateral molecular interaction and thermal stability of the liquid crystalline polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6214–6228, 2008     

刚性链侧链型液晶高分子合成与研究

以自由基聚合方法，合成了一系列含有３个苯环通过酯键相联的液晶性单体及其聚合物，这类刚性液晶基元不通过柔性间隔基而直接竖挂在聚丙烯酸酯大分子主链上，具有很高的Ｔｇ·ＤＳＣ及偏光显微镜结果表明，所有的单体和聚合物均为向列型热致性液晶。     

Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

Synthesis and thermal behavior of side-chain liquid crystalline polymethacrylates containing tolane-based mesogenic side groups

The synthesis and characterization of nine polymethacrylates containing 4-alkoxy-4′-trifluoromethyltolane, 4-alkoxy-4′-cyanotolane, and 4-alkoxy-4′-nitrotolane side groups were described in this study. The phase behavior of the prepared monomers and polymers was characterized by differential scanning calorimetry, optical polarizing microscopy, and x-ray diffraction. All of the obtained monomers exhibit no mesophase, while most of the synthesized polymers reveal enantiotropic mesomorphism. The polymethacrylate containing 4-propanyloxy-4′-nitrotolane side groups was the only one which shows no mesomorphic behavior. Both the spacer length and the nature of terminal groups have profound influence on the phase transition temperatures and thermal stability of the mesophase. The polymers with longer spacers tend to form a more ordered mesophase with a wider temperature range. Among three polymers with the same spacer length, the polymer with a trifluoromethyl terminal end group is inclined to form a more ordered mesophase than the other two polymers. No side chain crystallization occurred for all obtained polymers. © 1994 John Wiley & Sons, Inc.     

Alternating fluorene copolymers containing isothianaphthene derivatives: A study of their aggregation properties and small band gap

Several fluorene copolymers containing isothianaphthene units ( P1 , P2 , and P3 ) or similar derivatives ( P4 and P5 ) have been synthesized by Pd‐catalyzed Suzuki polymerization. The monomers containing isothianaphthene were prepared by a ring‐closure reaction with Lawesson's reagent. Strong photoluminescence (PL) quenching in the film state was observed for P1 and P2 , which was mainly due to the enhanced quinoid character formed by introducing the isothianaphthene unit. Their energy levels of the compounds were determined using cyclic voltammetry. Among the polymers tested, the polymer containing both an isothianaphthene and a selenophene unit, P2 , showed the smallest band gap of 1.85 eV. The influence of structural variation on the band gap of the polymer chains was further investigated by optimizing the geometries of several model monomers. Our results based on the optical and electrochemical properties combined with theoretical calculations showed that polymers containing isothianaphthene have small band gaps, rigid conformations, and strong tendencies to aggregation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3573–3590, 2008     

Lyotropic smectic layering of side-on polysoaps in water

 The synthesis and characterization of lyotropic smectic amphiphilic side-on polymers are described. The amphiphile consists of a rigid, aromatic core with two terminal ethyleneoxide chains of various lengths and is laterally attached to a polysiloxane backbone; the length of the spacer has also been varied. The phase behavior of the monomeric amphiphiles and side-on polymers are determined by polarizing microscopy and ²H-NMR measurements. In water, most of the low molecular weight surfactants show restricted lyotropic properties, namely lyotropic smectic phases. The packing restriction of the amphiphiles is due to their geometric anisometry. All side-on polymers exhibit only lyotropic smectic phases. The phase regime of the polymer mesophase with respect to the monomers depends on the spacer length. In contrast to surfactants having a flexible hydrophobic group, these amphiphiles align spontaneously parallel to an external magnetic field, leading to perfect lyotropic smectic monodomains. Received: 21 May 2001 Accepted: 27 August 2001     

From Random Coil to Extended Nanocylinder: Dendrimer Fragments Shape Polymer Chains

Wedgelike dendrimer fragments , “dendrons”, attached to linear polymers as side groups, can be used to create anisotropic “nanocylinders”, leading to uncoiling and extension of the polymer chains. Synthetic macromolecules of this type can be visualized directly on surfaces and their contour length determined from scanning force micrographs. Unexpected acceleration effects in the polymerization of dendron monomers as well as the structural consequences of dendritic “pieces of cake” (shown schematically) on linear polymer chains are discussed.     

Towards a universal polymer backbone: design and synthesis of polymeric scaffolds containing terminal hydrogen-bonding recognition motifs at each repeating unit

Polymers containing terminal hydrogen-bonding recognition motifs based on diaminotriazine and diaminopyridine groups in their side chains for the self-assembly of appropriate receptors have been prepared by ring-opening metathesis polymerization (ROMP) of norbornenes. A new synthetic method for the preparation of norbornene monomers based on pure alkyl spacers is introduced. These monomers show unprecedented high reactivity using ROMP. To suppress self-association of diaminotriazine-based polymers, polymerizations were run in presence of N-butylthymine. The butylthymine acts as a protecting group via self-assembly onto the hydrogen-bonding sites of the polymeric scaffold, thereby solubilizing the polymer. Diaminopyridine monomers do not require the presence of a protecting group due to their low propensity to dimerize. In addition, they exhibit a high affinity for hydrogen-bonded receptors on both monomeric and polymeric level. These polymers present our first building blocks towards the design and synthesis of a "universal polymer scaffold".     

Design and synthesis of trivalent Tn glycoconjugate polymers by nitroxide-mediated polymerization

A new synthetic method for preparing Tn glycoconjugate polymers, containing tumor-associated carbohydrate antigens, by controlled living radical polymerization is reported. To mimic the authentic structures of Tn glycopeptide antigens and to explore the controlled living radical polymerization, three tumor-associated carbohydrate antigens (GalNAc, GalNAcα1-O-Ser, and GalNAcα1-O-Thr) were attached to a styrene-type monomer through a diethylene glycol spacer. Under nitroxide-mediated polymerization, controlled living radical polymerization proceeded to afford defined glycopeptide polymers with different Tn densities and compositions. The polydispersity index (PDI) and molecular weights were increased and conversions were decreased upon increasing the concentration of Tn glycoconjugate monomers. The resulting Tn glycoconjugate polymers were characterized by NMR and IR. The spectral data indicate that the Tn glycoconjugate moiety did attach to the polymer chain and Tn glycoconjugate density could be adjusted through the nitroxide-mediated polymerization conditions. The number of Tn units containing in the polymer chains could be estimated by NMR integration. This synthetic approach provides a new and efficient tool for constructing novel Tn glycoconjugate polymers.     

Broadband reflection in polymer stabilized cholesteric liquid crystal cells with chiral monomers derived from cholesterol

In this study, a series of achiral monomers and chiral monomers of different flexible spacer chains based on cholesteryl moiety were synthesized. Polymer stabilized cholesteric liquid crystal (PSCLC) cells were then created by incorporation of the polymer networks. The influence of the nature of the monomers and the spacer length of chiral monomers on the reflectance properties of PSCLC was investigated as well as the polymerization condition. The results strongly suggest that the chirality of the polymer networks plays an integral role in the observed reflection spectra, and the chiral polymer networks with chiral centers separated well from the polymer backbone induce a greater change in the bulk helix pitch, and produce the broader reflection band in these LC composites. In addition, the temperature dependence of the pitch of the composites before and after polymerization was investigated. To broaden the reflection band further, the experimental processes of thermally induced pitch variation simultaneously with a UV crosslinking reaction of the composites were presented. The morphology of the polymer network in the composites was studied by scanning electron microscopy (SEM). Copyright © 2008 John Wiley & Sons, Ltd.     

Hydrodynamic,optical, and electrooptical properties of macromolecules of third-generation cylindrical dendrimers in chloroform and dichloroacetic acid

Acrylic polymers containing side dendrons of the third generation based on L-aspartic acid have been studied via the methods of molecular hydrodynamics, dynamic and static light-scattering, optics, and electrooptics. There are marked differences in hydrodynamic and optical properties of the macromolecules under study and previously examined polymers with side dendrons of first and second generations. In the range of degrees of polymerization from 10 to 40, these macromolecules possess an extremely low shape asymmetry. Experiments demonstrate the predominant orientation of end side dendrons along the main molecular chain. In chloroform solutions, the orientation of macromolecules in hydrodynamic and electric fields occurs according to the large-scale mechanism. In dichloroacetic acid, the hydrodynamic dimensions of macromolecules decrease, an effect that is accompanied by an increase in the kinetic flexibility of polymer chains.     

SYNTHESIS AND PROPERTIES OF NEW MESOGEN-JACKETED LIQUID CRYSTALLINE POLYMERS*

Some new mesogen-jacketed liquid crystalline polymers (MJLCP) with polymer backbones, spacers, andmesogenic units of different structures were synthesized by radical polymerization. The mesomorphic behavior of thesepolymers was examined using differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). Theirliquid crystallinity is influenced by the variation of polymer backbone, spacer, mesogenic unit and its terminal groups. Theresults show that 1) a more flexible polymer main-chain is more favorable to the formation of a liquid crystal phase, while 2)a flexible spacer will decrease the "Jacket Effect" and the liquid crystallinity and 3) a subtle modification of the terminalgroups on the mesogenic unit may also have a significant influence on properties of the polymers.     

一类新的刚性链侧链型液晶高分子的合成

以自由基聚合方法，合成了一系列含有三个苯环通过酯键相联的液晶性单体及其聚合物．在这类新的液晶高分子中，刚性液晶基元不通过柔性间隔基而直接竖挂在聚甲基丙烯酸酯大分子主链上．这些高分子有很高的玻璃化转变温度，表明其分子链刚性较大，因而代表了一类新的刚性链侧链型液晶高分子．它们的液晶行为用ＤＳＣ、偏光显微镜和Ｘ－光衍射进行了表征．发现所有单体和聚合物均为向列型热致性液晶．     

Novel synthesis of photocrosslinkable polymers

A new preparative route to photocrosslinkable polymers in which the polymers are produced directly from the polymerization of vinyl monomers having photocrosslinkable groups has been investigated. The photosensitive resins thus produced have higher sensitivity and resolution than conventional photosensitive resins. The monomers were synthesized from the esterification of vinylphenols or vinyl β-chloroethyl ether with cinnamic acid, β-styrylacrylic acid, and their homologs, and from the etherification of vinyl β-chloroethyl ether with hydroxychalcones. Homopolymerizations of these monomers and their copolymerizations with other comonomers were investigated with the use of both radical and ionic initiators. It is shown that radical polymerization of the monomers gave soluble polymers only at low conversion. Anionic initiators did not initiate polymerization. Cationic polymerization imparted soluble polymers in high yield, except for the monomers bearing cyano groups, which generally gave insoluble polymers. Infrared and NMR spectroscopic investigation of the cationically obtained soluble polymers and comparative investigation by cationic polymerization of model compounds indicated that polymerization of the monomers proceeds through the vinyl double bond without affecting the photosensitive unsaturated bond. Thus, linear photocrosslinkable polymers with an intact photoreactive group may be produced by cationic polymerization. In general, these polymers have uniform structure and modifiable physical properties depending on the monomer used. The polymer thus obtained from β-vinyloxyethyl cinnamate has been shown to have excellent properties for use as a photo-resist.     

Synthesis and characterization of poly(fluorene‐co‐alt‐phenylene) containing 1,3,4‐oxadiazole dendritic pendants

A series of poly(fluorene‐co‐alt‐phenylene)s containing various generations of dendritic oxadiazole (OXD) pendent wedges were synthesized by the Suzuki polycondensation of OXD‐functionalized 1,4‐dibromophenylene with 9,9‐dihexylfluorene‐2,7‐diboronic ester. The obtained polymers possessed excellent solubility in common solvents and good thermal stability. Photophysical studies showed that the dendronized polymers appended with higher generations of OXD dendrons exhibited enhanced photoluminescence efficiencies and narrower values of the full width at half‐maximum. This was attributed to the shielding effect induced by the bulky dendritic OXD side chains, which prevented self‐quenching and suppressed the formation of aggregates/excimers. The energy transfer from the OXD dendrons to the polymer backbones was very efficient when excitation of the peripheral OXD dendrons resulted mainly in the polymer backbone emission alone. In particular, the photoluminescence emission intensities by the sensitized excitations of OXD dendrons in solid films of the polymers were all stronger than those by the direct excitations of their polymer conjugated backbones. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6765–6774, 2006     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

Study on new chiral liquid crystalline monomers and polymers containing menthyl groups

A series of new chiral monomers (M1–M4) and the corresponding siloxane polymers (P1–P4) containing menthyl groups were synthesised to establish the relationship between their structure and liquid crystalline properties. The effect of the mesogenic core rigidity and the spacer length on the phase behaviour of the monomers and polymers obtained in this study was discussed. The selective reflection of light for the chiral monomers was studied with UV-Vis spectrometer. Polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and thermogravimetric analysis were used to characterise the phase behaviour and thermal stabilities. It was found that these chiral monomers and polymers were beneficial for the formation of the mesophases when a flexible spacer was inserted between the mesogenic core and terminal menthyl groups. M1–M3 showed enantiotropic chiral smectic C phase and cholesteric phase, and monotropic cubic blue phase on cooling cycle. M4 only showed cholesteric phase. P1–P4 showed a smectic A phase. With increasing the mesogenic core rigidity or decreasing the spacer length, the corresponding melting temperatures, glass transition temperatures and isotropic temperatures all increased.