Analysis of transmittance enhancement for a slab lens formed by sub-wavelength holes array on the metallic film

By investigating the transmittance and phase characteristics of the square holes on the metallic film, we find that the transmittance fluctuates with center distance between holes and appears resonant peaks, which attributes to the surface wave enhanced transmission phenomenon while the corresponding phase retardation through holes keeps constant. Based on this phenomenon, the slab lens can be optimized to a high transmittance by modulating the center distance of the holes. Design results show that the light intensity values at the focal spot of the slab lens can be enhanced from 3 to 14.5 in intensity scale when the center distance changes from 1.25λ to 0.95λ.     

基于微波透射法的金属薄膜方块电阻测量理论及其应用

依据矩形波导基模的场分布表达式和电磁边界条件,解析推导了插入金属薄膜后的矩形波导透射系数,建立了考虑介质衬底影响的金属纳米薄膜微波透射系数仿真计算方法及其方块电阻的微波测量方法.运用全波电磁仿真方法对金属纳米薄膜方块电阻的微波测量装置进行了仿真验证,结果表明透射系数幅度与方块电阻的对数之间呈线性关系.采用磁控溅射工艺分别在高阻硅和玻璃两种介质衬底表面制备了不同方块电阻值的银薄膜,并测量其微波透射系数.实测结果表明,提出的方法适用于方块电阻阻值为0.05—0.5?/square的金属薄膜.研究结果对于微纳制造领域的导电薄膜方块电阻表征具有参考价值.     

Enhanced transmission through periodic arrays of subwavelength holes: the role of localized waveguide resonances

By using the rigid full-vectorial three-dimensional finite-difference time-domain method, we show that the enhanced transmission through a metallic film with a periodic array of subwavelength holes results from two different resonances: (i) localized waveguide resonances where each air hole can be considered as a section of metallic waveguide with both ends open to free space, forming a low-quality-factor resonator, and (ii) well-recognized surface plasmon resonances due to the periodicity. These two different resonances can be characterized from electromagnetic band structures in the structured metal film. In addition, we show that the shape effect in the enhanced transmission through the Au film with subwavelength holes is attributed to the localized waveguide resonance.     

Control of extraordinary light transmission through perforated metal films using liquid crystals

We calculate the effective dielectric tensor of a metal film penetrated by cylindrical holes filled with a nematic liquid crystal (NLC). We assume that the director of the NLC is parallel to the film, and that its direction within the plane can be controlled by a static magnetic field, via the Freedericksz effect. To calculate the effective dielectric tensor, we consider both randomly distributed holes (using a Maxwell-Garnett approximation) and a square lattice of holes (using a Fourier technique). Both the holes and the lattice constant of the square lattice are assumed small compared to the wavelength. The films are found to exhibit extraordinary light transmission at special frequencies related to the surface plasmon resonances of the composite film. Furthermore, the frequencies of peak transmission are found to be substantially split when the dielectric in the holes is anisotropic. For typical NLC parameters, the splitting is of order 5–10% of the metal plasma frequency. Thus, the extraordinary transmission can be controlled by a static magnetic or electric field whose direction can be rotated to orient the director of the NLC. Finally, as a practical means of producing the NLC-filled holes, we consider the case where the entire perforated metal film is dipped into a pool of NLC, so that all the holes are filled with the NLC, and there are also homogeneous slabs of NLC on both sides of the film. The transmission in this geometry is shown to have similar characteristics to that in which the NLC-filled screen is placed in air.     

从光子晶体效应到表面等离子波的实时演变

文章报道了激光诱导太赫兹表面等离子谐振效应。采用激光抽运-太赫兹波探测技术，实时改变单晶硅中的载流子浓度，使其介电特性从类绝缘体演变为类金属导体，以支持表面等离子谐振效应，进而实现太赫兹波在周期性亚波长单晶硅孔阵列中的实时可控制谐振增强传输。同时还通过实验观测到太赫兹波从光子晶体效应到表面等离子波的实时演变。文章作者采用Fano模型对实验结果进行模拟分析，获得了与实验数据一致的理论拟合。     

Surface enhanced infrared absorption of a dye on a metallic diffraction grating

A two-dimensional square transmission diffraction grating consisting of micron holes in a gold film with a period of about 6 μm exhibits surface enhanced infrared absorption of rhodamine 6G in the range of 1400–1600 cm^?1 near the edge of the lower allowed band with a gain of about 10.     

二维亚波长金属小孔阵列的透射光增强效应

对金属薄膜上的二维亚波长小孔阵列的光透射增强现象进行了数值模拟，结果显示不仅实际金属薄膜上的小孔阵列结构具有透射增强效应，理想导体薄膜的相同结构也具有透射增强效应，但没有实际金属薄膜的增强明显-通过分析指出，这种小孔阵列的光透射增强效应是一种复杂的波导耦合效应-与金属薄膜上的表面电流一样，表面等离激元波具有将入射光能量从金属表面向小孔转移的作用，但不是透射增强的本质原因- 关键词： 表面电流 共振耦合 透射增强 表面等离激元     

The extraordinary optical transmission characters of the metallic film with rectangular hole arrays

The metallic films perforated with a periodic array of air holes show extraordinary optical transmission properties. In this paper the influence of the incident light's polarization direction and the arrays’ period on the transmission through the rectangular hole arrays immersed in a metallic film is studied by utilizing the finite-difference time-domain method. The results show that the intensities and number of the transmission peaks can be adjusted by changing the incident light's polarization direction, while the intensities can keep constant for some particular frequencies. The transmission peak's wavelength can be easily controlled by altering the lattice period parallel to the electric field for the rectangular holes. These results maybe provide reference for the design of multiple-wavelength resonance devices.     

Fabrication and shielding effectiveness evaluation of curved mesh optical windows using ray-optic tracing and equivalent film methods

A model with curved mesh optical windows is built using ray-optic tracing method for shielding effectiveness evaluation. Due to its unique zero order diffraction transmission characteristics, the metallic mesh used to build the model is treated in the model as a layer of optical film, and the transmission field of curved mesh optical windows is calculated using ray-optic tracing method. A cylindrical mesh optical window sample is fabricated and its shielding effectiveness is measured using a shielding effectiveness measurement system. Simulation results obtained with the model agree well with the experimental results, which proves the validity of the model.     

Applying a modal technique on a planar lens based on nanoscale slit arrays

A planar lens structure based on an array of nanoscale slits in a metallic film is modeled using a waveguide modal technique. The structure is modeled as a one dimensional lens followed by free space propagation. The obtained results are compared to published experimental results as well as numerical simulations using either the finite difference frequency domain or the transmission line method. A good agreement has been obtained with significant simulation time reduction.     

涡轮叶顶冷却布置对叶顶传热冷却性能的影响

本文采用数值模拟的方法,对比分析了1+1/2对转涡轮四种不同的叶顶冷却布置方案对叶顶传热、冷却性能以及气动特性的影响。四种布置方案分别是:靠近压力面垂直叶顶方向、靠近压力面且与叶顶有30°出射角、中弧线位置垂直叶顶方向、中弧线位置有30°出射角。研究表明,气膜孔沿压力面布置与气膜孔沿中弧线布置相比可以降低叶顶传热系数;由于气膜孔倾斜布置气膜射流动量降低,且削弱了肾形涡的影响,气膜的侧向覆盖范围增大。因此气膜孔靠近压力面布置可以提高气膜冷却效率;气膜孔靠近压力面且有30°出射角比垂直布置叶顶热负荷减少2.7%。另外,气膜孔靠近压力面布置可以降低主流的泄漏流量,有利于减小泄漏损失和提高涡轮效率。     

Optical properties of ultrathin films: evidence for a dielectric anomaly at the insulator-to-metal transition

Optical properties of ultrathin layers (<50 A) of Au and Pb quench condensed on amorphous germanium (alpha-Ge) have been measured in situ at 10 K. The development of these films from an insulating state to a metallic state is traced as a function of the film thickness as well as the sheet resistance, R(square). Of particular interest is the regime of R(square) near 3000 Omega where there is an anomaly in the optical transmission. This anomaly is due to a singularity in the dielectric function when the system undergoes an electronic percolation or insulator-to-metal (I/M) transition.     

Modeling Fraunhofer diffractive characteristics for modulation transfer function analysis of tilted ring metallic mesh

In order to analyze the Fraunhofer diffractive characteristics and modulation transfer function (MTF) of a tilted ring metallic mesh, an optical intensity distribution model of Fraunhofer diffraction is built using Huygens–Fresnel diffraction theory and the diffraction integral is carried out directly in the tilted mesh plane. The diffraction characteristics of the tilted ring metallic mesh are in good agreement with experimental results, which proves the correctness of the model established. MTF of an optical system with metallic mesh is calculated based on the model established and Fourier transform. Analysis shows that the degradation of MTF caused by diffraction of a ring mesh is much less than that of a square mesh whether they are vertical or tilted to the optical axis. Therefore, ring mesh can provide higher imaging quality than square mesh when they are used as high-pass filters in optical windows. A tilted array diffraction modulating factor is abstracted and believed useful in the analysis of diffractive characteristics of tilted square mesh and ring mesh, and it can be extended to Fraunhofer diffractive characteristics analysis of other tilted diffraction arrays.     

Matching effect in superconducting NbN thin film with a square lattice of holes

A square hole array is fabricated over a micro-bridge of NbN thin film by electron beam lithography and reactive ion milling. Magneto-resistance is measured across the micro-bridge filled with a hole array near the superconducting transition temperature. It is found that magneto-resistance minima occur when the number of vortices is an integer multiple or a fractional multiple of the number of holes. The temperature and the current dependences of the matching effect are studied.     

Interaction of Love waves with coupled cavity modes in a 2D holey phononic crystal

The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO₂ film deposited on a ST-cut quartz substrate. The coupling between SH modes and torsional mode in pillars induces a transmission dip that occurs at a frequency located in the range of the band-gap of the holey phononic crystal. Second, a cavity is constructed by removing lines of holes in the holey phononic crystal and results in a transmission peak that matches the dip. The optimal geometrical parameters enable us to create a coupling of the cavity mode and the localized pillar mode by introducing lines of pillars into the cavity, which significantly improved the efficiency of the cavity without increasing the crystal size. The obtained results will pave the way to implement advanced designs of high-performance electroacoustic sensors based on coupling modes in phononic crystals.     

超导邻近效应在正常金属层中引起的反常小能隙现象

将散射矩阵方法推广到超导双结系统，对正常金属/正常金属/超导结的隧道电导进行了研究.中间正常金属层中的电子和其Andreev反射空穴之间的相位相干性导致了隧道电导出现反常小能隙现象.综合考虑相干和顺序遂穿，计算结果理想的解释了最近Gupta等人在实验中观测到的反常小能隙现象.     

Optical transmission enhancement by a sub-wavelength film lens

A new sub-wavelength metallic film lens configuration is proposed, which is embedded in a thin ideal metal film, and its near field optical properties are investigated by finite-difference time-domain (FDTD)method. It is found that the optical transmission is greatly enhanced, and the spot size can be reduced by the sub-wavelength metallic film lens in comparison with the bare aperture. This kind of lens is expected to have practical applications in the very small aperture laser (VSAL), a promising nanosource for near-field optical storage and lithography.     

High-frequency field intensity along focal point of a long metallic parabolic reflector coated by a magnetized plasma layer using oblique incidence

Theoretical analysis of the electromagnetic field distribution in the focal region of a long metallic parabolic reflector that has its surface covered with a magnetized plasma layer is derived. The incident wave is considered to be with a general oblique incidence for both parallel and perpendicular polarizations. The electromagnetic field intensity expressions along the focal region are obtained accurately using Maslov's method. The effects of plasma thickness on the reflected and transmitted field distributions are investigated. The effects of other physical parameters such as the angle of incidence and the plasma and cyclotron frequencies on the transmitted fieldintensity distribution along the focal region are also studied. The results obtained by Maslov's method and Kirchhoff's approximation are found to be in a good agreement.     

Investigation of the effect of plasma waves excitation on target normal sheath ion acceleration using fs laser‐irradiating hydrogenated structures

Measurements of ion acceleration in polymethylmethacrylate foils covered by a thin copper film irradiated by fs laser in target normal sheath acceleration regime are presented. The ion acceleration depends on the laser parameters, such as the pulse energy; depends on the irradiation conditions, such as the focal point position of the laser with respect to the target surface; and depends on the target properties, such as the metallic film thickness. The proton acceleration increases in the presence of the metallic film enhancing the plasma electron density, reaching about 1.6 MeV energy for a focal position on the target surface. The plasma diagnostics uses SiC detectors, absorber foils, Faraday cups, and gafchromic films. Employing p‐polarized laser light and a suitable oblique incidence, it is possible to increase the proton acceleration up to about 2.0 MeV thanks to the effects of laser absorption resonance due to plasma waves excitation.     

Femtosecond laser-based fabrication of a new model material to study fracture

The ductile fracture process consists of the nucleation, growth and coalescence of voids in a material. Predictive models of ductility require a complete understanding of the coalescence event. However, coalescence occurs over very small strains and is therefore difficult to observe experimentally. We have addressed this by developing a new class of model material. It consists of femtosecond laser drilled holes and diffusion bonded metallic sheets, which can be mechanically tested in situ either by scanning electron microscopy (SEM) or by X-raycomputed tomography (XRCT). The fabrication steps are presented and the model material is characterized by optical and electron microscopy, nanoindentation and tomography. The heat affected zone around the laser holes is found to be harder than the unaffected material and consists of nano-scale grains. Finally we show that the coalescence event is well captured using both SEM and XRCT. The fabrication method is adaptable to a wide range of materials and enables one to produce 2D and 3D arrays of holes or cracks with controlled size, volume fraction and distribution. PACS  62.20.Mk; 62.25.+g; 79.20.Ds