Surface modulated hierarchical graphene film via sulfur and phosphorus dual-doping for high performance flexible supercapacitors

The steam-assistant heteroatoms of sulfur and phosphorus dual-doped graphene film fabricated via an ice-template and thermal-activation approach demonstrates an excellent pseudocapacitive behavior in flexible electrochemical capacitors.     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.     

纳米多孔结构镍基复合膜电极的电化学法制备及其电容特性

通过对电沉积法得到的Ni-Cu合金镀层进行电化学去合金化处理, 制备了纳米多孔结构金属镍膜. 采用循环伏安法对多孔金属镍膜在1 mol·L^-1 KOH溶液中进行阳极氧化处理, 获得了纳米多孔结构的镍基复合膜电极. 应用扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和电化学技术对所制备的膜电极的物理性质及赝电容特性进行了表征. SEM、XRD和XPS的测试结果表明, 所制备的纳米多孔结构镍基复合膜由Ni、Ni(OH)₂和NiOOH组成. 电化学实验结果显示, 该复合膜在20 A·g^-1的充放电电流密度下, 给出了578 F·g^-1的初始比电容; 在1000次充放电循环后, 它的比电容值为544 F·g^-1, 电容保持率为94%. 纳米多孔结构有利于KOH电解液的渗透, 从而促进反应物种在电极内部的传输; 纳米多孔的金属镍基体可以提高Ni(OH)₂膜的电子导电性; 纳米大小的Ni(OH)₂颗粒能够缩短质子的固相扩散路径. 上述因素是所制备的纳米多孔结构镍基复合膜电极具有优异赝电容特性的主要原因.     

基于三维多孔石墨烯/含钛共轭聚合物复合多孔薄膜的柔性全固态超级电容器

采用Fe~(3+)离子交联的方法制备氧化石墨烯水凝胶,经化学还原制备出一种新型的三维多孔石墨烯薄膜材料命名为rGO-Fe;通过电化学聚合法在rGO-Fe基底上进一步制备了一种三维多孔石墨烯/含钛共轭聚合物复合薄膜材料,命名为r GO-Fe/P(EDOT:P3C)-1-Ti。作为一种新型复合薄膜材料,rGO-Fe/P(EDOT:P3C)-1-Ti较rGO-Fe具有更好的抗拉伸性能,平均厚度为3μm的rGO-Fe/P(EDOT:P3C)-1-Ti薄膜,可承受载荷拉力0.97 N,优于相同厚度的rGO-Fe薄膜(0.76 N)。将rGO-Fe/P(EDOT:P3C)-1-Ti薄膜作为自支撑电极制备了柔性全固态超级电容器,表现出优良的电容性能,且在弯折状态下仍能正常工作。当电流密度为0.1 A?g~(-1)时,该柔性全固态超级电容器的质量比容量为71.13?F?g~(-1),面积比容量为101 mF?cm~(-2),当电流密度为0.6 A?g~(-1)时,其质量比容量为18.14 F?g~(-1),面积比容量为25.8 mF?cm~(-2)。     

石墨烯/聚3，4-乙烯二氧噻吩复合物的电化学制备及其在超级电容器中的应用

首次提出了一种在离子液体中在石墨烯表面用恒电流法聚合3,4-乙烯二氧噻吩(EDOT)单体制备石墨烯/聚3,4-乙烯二氧噻吩(石墨烯/PEDOT)复合物的方法。用原子力显微镜、扫描电镜等技术表征证明石墨烯/PEDOT复合物是由PEDOT纳米谷粒状颗粒分散在石墨烯片表面而组成的。将该复合物用作超级电容器电极材料时,在1.0 A.g-1的充放电比电流下得到的比电容值为181 F.g-1。同时,该材料还显现出较好的充放电可逆性和稳定性。     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。     

无模板法合成具有分级结构的多孔氧化镍及其电容性能研究(英文)

应用无模板水热法制备了由超薄氧化镍纳米片组装而成的具有分级结构的多孔氧化镍,SEM观察表明经煅烧氧化镍仍保持花状球形结构.电化学测试结果表明,扫速为20 mV.s-1时,其比电容值435 F.g-1,循环1000周期之后,电容值基本没有衰减;电流密度为10 A.g-1时,其比电容值为367 F.g-1.该材料是一种有应用价值的超级电容器材料.     

Nickel foam-supported porous NiO/polyaniline film as anode for lithium ion batteries

Nickel foam-supported porous NiO film was prepared by a chemical bath deposition technique, and the NiO/polyaniline (PANI) film was obtained by depositing the PANI layer on the surface of the NiO film. The NiO film was constructed by NiO nanoflakes, and after the deposition of PANI, these nanoflakes were coated by PANI. As an anode for lithium ion batteries, the NiO/PANI film exhibits weaker polarization as compared to the NiO film. The specific capacity after 50 cycles for NiO/PANI film is 520 mAh g⁻¹ at 1 C, higher than that of NiO film (440 mAh g⁻¹). The improvement of these properties is attributed to the enhanced electrical conduction and film stability of the electrode with PANI.     

TiO2–B Nanosheets/Anatase Nanocrystals Co‐Anchored on Nanoporous Graphene: In Situ Reduction–Hydrolysis Synthesis and Their Superior Rate Performance as an Anode Material

A unique hybrid, TiO₂–B nanosheets/anatase nanocrystals co‐anchored on nanoporous graphene sheets, can be synthesized by a facile microwave‐induced in situ reduction–hydrolysis route. The as‐formed nanohybrid has a hierarchically porous structure, involving both mesopores of approximately 4 nm and meso‐/macropores of 30–60 nm in the graphene sheets, and a large surface area. Importantly, electrodes composed of the nanohybrid exhibit superior rate capability (160 mA h g^?1 at ca. 36 C; 154 mA h g^?1 at ca. 72 C) and excellent cyclability. The synergistic effects of conductive graphene with numerous nanopores and the pseudocapacitive effect of ultrafine TiO₂–B nanosheets and anatase nanocrystals endow the hybrid a superior rate capability.     

Three-dimensional flower-like nickel oxide supported on graphene sheets as electrode material for supercapacitors

Dispersed three-dimensional (3D) flower-like nickel oxide on graphene sheets was synthesized by incorporating a facile hydrothermal process with a thermal treatment process. The possible growth mechanism of 3D flower-like NiO is discussed. When used as electrode materials for supercapacitors, the resultant composite exhibits a specific capacitance of 346F/g (1.5A/g), a good rate performance and cycle stability in 2?M KOH. NiO in the composite could provide a specific capacitance as high as 778.7F/g, compared to that of bare NiO of only 220F/g. The functional features of unique 3D flower-like NiO morphology, high conductivity of graphene sheets and its protective effect to the structure of NiO result in an improved electrochemical performance.     

石墨烯的制备、表征及其在透明导电膜中的应用

近年来,石墨烯因其优异的电学和光学等特性,越来越受到人们的广泛关注。研究人员应用多种方法来合成石墨烯并且探讨其潜在的应用价值。本文首先简要介绍了石墨烯的结构及其基本的物理性质,并简单回顾了石墨烯的合成方法和表征手段。在此基础上,讨论了石墨烯/银复合薄膜在透明导电膜中的应用,并详细介绍了我们在该领域的研究成果。用化学气相沉积法（CVD）和多羟基法分别制备了双层石墨烯及银纳米线,成功合成了石墨烯/银复合薄膜,结果表明复合薄膜的方块电阻可降低至26 Ω·□-1,展示了其在光电器件上广泛的应用前景。     

NiO/rGO的溶剂热合成以及作为高循环稳定性超级电容器电极材料的性能表征

通过简单的溶剂热法以及其后续热处理过程,制备了NiO纳米花和NiO/还原氧化石墨烯（rGO）复合物。 在NiO/rGO复合物中,rGO作为基底生长NiO,与此同时,NiO则有效的避免了rGO的团聚。 采用热重分析(TG)、场发射扫描电子显微镜(FE-SEM)和X射线衍射对样品的成分、形貌和结构进行了表征。 NiO/rGO复合物（NiO和rGO的质量比为82.7∶17.3）电极呈现优异的电化学性能。 在1 A/g时,初始比电容为514.9 F/g,当材料完全活化后,其比电容高达600 F/g。 同时,在电流密度为10 A/g时,相比于1 A/g时的比电容保持率为83.5%。 此外,该电极材料具有非常优异的循环稳定性,6000次循环后电容衰减率为7.4%。 表明所制备的复合物是一种有应用价值的超级电容器电极材料。     

NF/rGO/Co_3O_4/NiO电极的制备及在超级电容器中的应用

以泡沫镍(NF)为集流体,在优化好的电位、时间和浓度下,将还原氧化石墨烯(rGO)、金属氧化物(Co_3O_4和NiO)直接生长在泡沫镍上,制备了NF/rGO/Co_3O_4和NF/rGO/Co_3O_4/NiO电极.运用三电极体系对电极材料进行了恒流充放电(GCD)和交流阻抗(EIS)等测试.结果表明,复合材料NF/rGO/Co_3O_4/NiO具有较高的比容量(电流密度为2 A/g时,比容量达到1188.6 F/g)和较好的循环稳定性(2000周充放电后,稳定性达到80.5%).该材料还具有较高的倍率性能,当电流密度由2 A/g增至12 A/g时,倍率性能仍能达到75.7%.     

Directly drawing self-assembled, porous, and monolithic graphene fiber from chemical vapor deposition grown graphene film and its electrochemical properties

Integration of graphene into macroscopic architectures represents the first step toward creating a new class of graphene-based nanodevices. We report a novel yet simple approach to fabricate graphene fibers, a porous and monolithic macrostructure, from chemical vapor deposition grown graphene films. Graphene is first self-assembled from a 2D film to a 1D fiberlike structure in an organic solvent (e.g., ethanol, acetone) and then dried to give the porous and crumpled structure. The method developed here is scalable and controllable, delivering tunable morphology and pore structure by controlling the evaporation of solvents with suitable surface tension. The fibers are 20-50 μm thick, with a typical electrical conductivity of ～1000 S/m. The cyclic voltammetric studies show typical capacitive behavior for the porous graphene fibers with good rate stability and capacitance values ranging from 0.6 to 1.4 mF/cm(2). Decorated with only 1-3 wt % MnO(2), the graphene/MnO(2) composites exhibit remarkable enhancement of combined performance both with respect to discharge capacitance (up to 12.4 mF/cm(2)) and cycling stability. This special structure could facilitate chemical doping and electrochemical energy storage and find applications in catalyst supports, sensors, supercapacitors, Li ion batteries, etc.     

自支撑三维功能化石墨烯/聚苯胺电极材料的制备及超级电容性能

采用水热法制备了三维石墨烯(3D-G),并以十八胺(ODA)为接枝剂对部分还原的氧化石墨烯进行氨基化处理,再利用原位聚合法在氨基化石墨烯表面生长聚苯胺,制备了十八胺功能化石墨烯/聚苯胺(G-ODA/PANI).对材料进行了结构表征、电化学性能分析和材料结构的比电容贡献分析.结果显示,电极材料的电容贡献大部分体现为材料的表面电容,G-ODA/PANI电极片在1 A/g电流密度时的比电容最高可达1080 F/g,是未功能化石墨烯/聚苯胺电极材料(G/PANI)的2.57倍,且循环稳定性也有很大的提高,循环10000周后的比容量保持率为90.8%,比G/PANI高9.6%.     

氮掺杂二氧化钛-氧化镍双层薄膜的光电致色特性

以金属钛为靶材、O2/N2/Ar混合气氛为溅射气体,在导电玻璃(ITO)表面磁控溅射一层薄膜,再经300-500℃退火处理制备了氮掺杂TiO2薄膜.采用X射线衍射(XRD)、X光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见吸收光谱等对薄膜的微观结构、光学特性和光电化学性能等进行了研究.进而采用化学沉积的方法在TiO2-xNx薄膜表面沉积上一层多孔NiO薄膜,研究表明,制备的ITO/TiO2-xNx/NiO双层薄膜具有明显的光电致色特性,400℃退火处理的氮掺杂TiO2薄膜具有最高的光电流响应,经氙灯照射1h后,薄膜从无色变成棕色,500nm波长处光透过率从79.0%下降至12.6%.     

泡沫状二维复合材料的合成及超级电容器性能

利用蔗糖和乙醇作为碳源,以氯化镍高温还原形成的镍颗粒作为模板,制备了泡沫状石墨烯多孔材料。 继而以其作为载体,通过浸渍和高温热解法制备了泡沫状MoS₂/石墨烯二维复合材料。 通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱、X射线衍射(XRD)等技术手段研究了复合材料的形貌、组成和结构。 循环伏安、恒流充放电和循环寿命测试均表明,该材料具有良好的超级电容器性能,质量比电容达203.5 F/g,面积比电容达280 mF/cm²,5000次恒流充放电循环后的电容保持率约80%。     

Graphene and carbon nanotube composite electrodes for supercapacitors with ultra-high energy density

We describe a graphene and single-walled carbon nanotube (SWCNT) composite film prepared by a blending process for use as electrodes in high energy density supercapacitors. Specific capacitances of 290.6 F g(-1) and 201.0 F g(-1) have been obtained for a single electrode in aqueous and organic electrolytes, respectively, using a more practical two-electrode testing system. In the organic electrolyte the energy density reached 62.8 Wh kg(-1) and the power density reached 58.5 kW kg(-1). The addition of single-walled carbon nanotubes raised the energy density by 23% and power density by 31% more than the graphene electrodes. The graphene/CNT electrodes exhibited an ultra-high energy density of 155.6 Wh kg(-1) in ionic liquid at room temperature. In addition, the specific capacitance increased by 29% after 1000 cycles in ionic liquid, indicating their excellent cyclicity. The SWCNTs acted as a conductive additive, spacer, and binder in the graphene/CNT supercapacitors. This work suggests that our graphene/CNT supercapacitors can be comparable to NiMH batteries in performance and are promising for applications in hybrid vehicles and electric vehicles.     

α-Fe2O3/石墨烯水凝胶复合材料的自组装制备及电化学性能

采用水热法自组装合成超薄α-Fe₂O₃/还原氧化石墨烯水凝胶（3DGH）复合材料.复合材料的物性表征和电化学测试结果表明,α-Fe₂O₃/3DGH材料呈三维多孔结构,直径约100 nm的α-Fe₂O₃颗粒均匀生长在还原氧化石墨烯片层上;通过调节复合材料中Fe³⁺的负载量,可实现α-Fe₂O₃颗粒的可控生长,粒径为200~30 nm;作为超级电容器的电极材料,α-Fe₂O₃粒径为100 nm左右时,铁负载量为40%的α-Fe₂O₃/3DGH复合材料具有最大的比电容（750.8 F/g,1 A/g）和循环稳定性（在10 A/g电流密度下,充放电5000次后比电容保持率为81.9%）,高于纯α-Fe₂O₃材料的比电容（251.6 F/g,1 A/g）和循环稳定性（充放电5000次后比电容保持率为43.8%）.     

Direct synthesis of porous NiO nanowall arrays on conductive substrates for supercapacitor application

Porous NiO nanowall arrays (NWAs) grown on flexible Fe-Co-Ni alloy have been successfully synthesized by using nullaginite (Ni₂(OH)₂CO₃) as precursor and investigated as supercapacitor electrodes. In details, we adopted a simple hydrothermal method to realize Ni₂(OH)₂CO₃ NWAs and examined their robust mechanical adhesion to substrate via a long-time ultrasonication test. Porous NiO NWAs were then obtained by a post-calcination towards precursors at 500 °C in nitrogen atmosphere. Electrochemical properties of as-synthesized NiO NWAs were evaluated by cyclic voltammetry and galvanostatic charge/discharge; porous NiO NWAs electrode delivered a specific capacitance of 270 F/g (0.67 A/g); even at high current densities, the electrode could still deliver a high capacitance up to 236 F/g (13.35 A/g). Meanwhile, it exhibited excellent cycle lifetime with ∼93% specific capacitance kept after 4000 cycles. These results suggest that as-made porous NiO NWAs electrode is a promising candidate for future thin-film supercapacitors and other microelectronic systems.