Reduction kinetics of Pu(IV) and Np(VI) by N,N-dimethylhydrazine,and its potential application in nuclear fuel reprocessing

Reduction kinetics of Pu(IV) by N,N-dimethylhydrazine (NNDMH) were studied by spectrophotometry, and the reduction rate equation in 3M (mol/dm³) nitric acid was obtained. The reduction properties of NNDMH for U(VI), Np(VI), and Pu(IV) was studied in the mixture solution of trin-butylphosphate diluted to 30 vol.% by n-dodecane (30% TBP) and 3M nitric acid. It was confirmed that NNDMH selectively reduce Np(VI) to Np(V) without affecting the valences of U(VI) and Pu(IV) in a few minutes. Numerical simulation indicated that 99.9% of Np was separated from U and Pu applying NNDMH for a mixer-settler.     

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI)

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.     

Some studies on the extraction of hexavalent actinide ions from aqueous carboxylic acid media by long-chain amines

The extraction of hexavalent actinides from aqueous carboxylic acid media by tertiary amines was studied. Both U(VI) and Pu(VI) are found to be extracted well whereas Np(VI) was practically inextractable except from acetic acid medium. The absorption spectral studies revealed that the inextractability of Np(VI) is due to its reduction to Np(V). Depending on the diluent used, both tetra and triacetato complexes of U(VI) were found to be present in the organic phase. The absorption spectral studies suggested that the formation of tetraacetato species occurs in the organic phase. An amine extraction method for the separation of U(VI) from a number of metallic impurities using malonic acid medium is suggested.     

Determination of boron by (p, a) reaction

Back-extraction of tri- and tetravalent actinides from diisodecylphosphoric acid (DIDPA) is studied using hydrazine carbonate as back-extractant. In experiments using 0.5M DIDPA–0.1M TBP n-dodecane solution, Am(III), Eu(III), Pu(IV) and Np(IV) are back-extracted, and the distribution ratios are decreased with an increase of hydrazine carbonate concentration. The back-extraction equilibria are confirmed by slope analysis in consideration of neutralization between DIDPA and hydrazine carbonate, which occurs quantitatively during back-extraction. In particular, oxidation of Np(IV) to Np(V) during back-extraction is observed by measuring absorption spectra. The hydrazinium ion acts as an oxidation reagent in the back-extraction of Np(IV). Separation factors of those metals are compared with the results of HDEHP. Hydrazine carbonate back-extracts Np(IV) more selectively from DIDPA than from HDEHP.     

Importance of energy level matching for bonding in Th(3+)-Am(3+) actinide metallocene amidinates, (C(5)Me(5))(2)[(i)PrNC(Me)N(i)Pr]An

The synthesis of a rare trivalent Th(3+) complex, (C(5)Me(5))(2)[(i)PrNC(Me)N(i)Pr]Th, initiated a density functional theory analysis on the electronic and molecular structures of trivalent actinide complexes of this type for An = Th, Pa, U, Np, Pu, and Am. While the 6d orbital is found to accommodate the unpaired spin in the Th(3+) species, the next member of the series, Pa, is characterized by an f(2) ground state, and later actinides successively fill the 5f shell. In this report, we principally examine the evolution of the bonding as one advances along the actinide row. We find that the early actinides (Pa-Np) are characterized by localized f orbitals and essentially ionic bonding, whereas the f orbitals in the later members of the series (Pu, Am) exhibit significant interaction and spin delocalization into the carbon- and nitrogen-based ligand orbitals. This is perhaps counter-intuitive since the f orbital radius and hence metal-ligand overlap decreases with increasing Z, but this trend is counter-acted by the fact that the actinide contraction also leads to a stabilization of the f orbital manifold that leads to a near degeneracy between the An 5f and cyclopentadienyl π-orbitals for Pu and Am, causing a significant orbital interaction.     

Strong correlations in actinide redox reactions

Reduction-oxidation (redox) reactions of the redox couples An(VI)/An(V), An(V)/An(IV), and An(IV)/An(III), where An is an element in the family of early actinides (U, Np, and Pu), as well as Am(VI)/Am(V) and Am(V)/Am(III), are modeled by combining density functional theory with a generalized Anderson impurity model that accounts for the strong correlations between the 5f electrons. Diagonalization of the Anderson impurity model yields improved estimates for the redox potentials and the propensity of the actinide complexes to disproportionate.     

Thermal decomposition of Np(IV) and Pu(III, IV) oxalates

Thermal decomposition of Pu(C₂O₄)₂·6H₂O, Pu₂(C₂O₄)₃·10H₂O and Np(C₂O₄)₂ ·6H₂O has been studied by using combination of gas chromatography, infrared spectroscopy, spectrophotometry and complex thermal analysis. We also investigated the decomposition of Pu oxalate under its -radiation. The reduction of Pu(IV) to Pu(III) has been confirmed. We found Np(V), which is formed from Np(IV), on the basis of infrared and absorption spectra of the intermediate compounds.     

Bonding Trends Traversing the Tetravalent Actinide Series: Synthesis, Structural, and Computational Analysis of An(IV)((Ar)acnac)(4) Complexes (An = Th, U, Np, Pu; (Ar)acnac = ArNC(Ph)CHC(Ph)O; Ar = 3,5-(t)Bu(2)C(6)H(3))

A series of tetravalent An(IV) complexes with a bis-phenyl β-ketoiminate N,O donor ligand has been synthesized with the aim of identifying bonding trends and changes across the actinide series. The neutral molecules are homoleptic with the formula An((Ar)acnac)(4) (An = Th (1), U (2), Np (3), Pu (4); (Ar)acnac = ArNC(Ph)CHC(Ph)O; Ar = 3,5-(t)Bu(2)C(6)H(3)) and were synthesized through salt metathesis reactions with actinide chloride precursors. NMR and electronic absorption spectroscopy confirm the purity of all four new compounds and demonstrate stability in both solution and the solid state. The Th, U, and Pu complexes were structurally elucidated by single-crystal X-ray diffraction and shown to be isostructural in space group C2/c. Analysis of the bond lengths reveals shortening of the An-O and An-N distances arising from the actinide contraction upon moving from 1 to 2. The shortening is more pronounced upon moving from 2 to 4, and the steric constraints of the tetrakis complexes appear to prevent the enhanced U-O versus Pu-O orbital interactions previously observed in the comparison of UI(2)((Ar)acnac)(2) and PuI(2)((Ar)acnac)(2) bis-complexes. Computational analysis of models for 1, 2, and 4 (1a, 2a, and 4a, respectively) concludes that both the An-O and the An-N bonds are predominantly ionic for all three molecules, with the An-O bonds being slightly more covalent. Molecular orbital energy level diagrams indicate the largest 5f-ligand orbital mixing for 4a (Pu), but spatial overlap considerations do not lead to the conclusion that this implies significantly greater covalency in the Pu-ligand bonding. QTAIM bond critical point data suggest that both U-O/U-N and Pu-O/Pu-N are marginally more covalent than the Th analogues.     

Gas-phase uranyl, neptunyl, and plutonyl: hydration and oxidation studied by experiment and theory

The following monopositive actinyl ions were produced by electrospray ionization of aqueous solutions of An(VI)O(2)(ClO(4))(2) (An = U, Np, Pu): U(V)O(2)(+), Np(V)O(2)(+), Pu(V)O(2)(+), U(VI)O(2)(OH)(+), and Pu(VI)O(2)(OH)(+); abundances of the actinyl ions reflect the relative stabilities of the An(VI) and An(V) oxidation states. Gas-phase reactions with water in an ion trap revealed that water addition terminates at AnO(2)(+)·(H(2)O)(4) (An = U, Np, Pu) and AnO(2)(OH)(+)·(H(2)O)(3) (An = U, Pu), each with four equatorial ligands. These terminal hydrates evidently correspond to the maximum inner-sphere water coordination in the gas phase, as substantiated by density functional theory (DFT) computations of the hydrate structures and energetics. Measured hydration rates for the AnO(2)(OH)(+) were substantially faster than for the AnO(2)(+), reflecting additional vibrational degrees of freedom in the hydroxide ions for stabilization of hot adducts. Dioxygen addition resulted in UO(2)(+)(O(2))(H(2)O)(n) (n = 2, 3), whereas O(2) addition was not observed for NpO(2)(+) or PuO(2)(+) hydrates. DFT suggests that two-electron three-centered bonds form between UO(2)(+) and O(2), but not between NpO(2)(+) and O(2). As formation of the UO(2)(+)-O(2) bonds formally corresponds to the oxidation of U(V) to U(VI), the absence of this bonding with NpO(2)(+) can be considered a manifestation of the lower relative stability of Np(VI).     

Role of anions and reaction conditions in the preparation of uranium(VI), neptunium(VI), and plutonium(VI) borates

U(VI), Np(VI), and Pu(VI) borates with the formula AnO(2)[B(8)O(11)(OH)(4)] (An = U, Np, Pu) have been prepared via the reactions of U(VI) nitrate, Np(VI) perchlorate, or Pu(IV) or Pu(VI) nitrate with molten boric acid. These compounds are all isotypic and consist of a linear actinyl(VI) cation, AnO(2)(2+), surrounded by BO(3) triangles and BO(4) tetrahedra to create an AnO(8) hexagonal bipyramidal environment. The actinyl bond lengths are consistent with actinide contraction across this series. The borate anions bridge between actinyl units to create sheets. Additional BO(3) triangles and BO(4) tetrahedra extend from the polyborate layers and connect these sheets together to form a three-dimensional chiral framework structure. UV-vis-NIR absorption and fluorescence spectroscopy confirms the hexavalent oxidation state in all three compounds. Bond-valence parameters are developed for Np(VI).     

Gas-phase coordination complexes of U(VI)O2(2+), Np(VI)O2(2+), and Pu(VI)O2(2+) with dimethylformamide

Electrospray ionization of actinyl perchlorate solutions in H₂O with 5% by volume of dimethylformamide (DMF) produced the isolatable gas-phase complexes, [An^VIO₂(DMF)₃(H₂O)]²⁺ and [An^VIO₂(DMF)₄]²⁺, where An = U, Np, and Pu. Collision-induced dissociation confirmed the composition of the dipositive coordination complexes, and produced doubly- and singly-charged fragment ions. The fragmentation products reveal differences in underlying chemistries of uranyl, neptunyl, and plutonyl, including the lower stability of Np(VI) and Pu(VI) compared with U(VI).     

Complexation of Pu(IV) with the natural siderophore desferrioxamine B and the redox properties of Pu(IV)(siderophore) complexes

The bioavailability and mobility of Pu species can be profoundly affected by siderophores and other oxygen-rich organic ligands. Pu(IV)(siderophore) complexes are generally soluble and may constitute with other soluble organo-Pu(IV) complexes the main fraction of soluble Pu(IV) in the environment. In order to understand the impact of siderophores on the behavior of Pu species, it is important to characterize the formation and redox behavior of Pu(siderophore) complexes. In this work, desferrioxamine B (DFO-B) was investigated for its capacity to bind Pu(IV) as a model siderophore and the properties of the complexes formed were characterized by optical spectroscopy measurements. In a 1:1 Pu(IV)/DFO-B ratio, the complexes Pu(IV)(H2DFO-B)4+, Pu(IV)(H1DFO-B)3+, Pu(IV)(DFO-B)2+, and Pu(IV)(DFO-B)(OH)+ form with corresponding thermodynamic stability constants log beta1,1,2 = 35.48, log beta1,1,1 = 34.87, log beta1,1,0 = 33.98, and log beta1,1,-1 = 27.33, respectively. In the presence of excess DFO-B, the complex Pu(IV)H2(DFO-B)22+ forms with the formation constant log beta2,1,2 = 62.30. The redox potential of the complex Pu(IV)H2(DFO-B)22+ was determined by cyclic voltammetry to be E1/2 = -0.509 V, and the redox potential of the complex Pu(IV)(DFO-B)2+ was estimated to be E1/2 = -0.269 V. The redox properties of Pu(IV)(DFO-B)2+ complexes indicate that Pu(III)(siderophore) complexes are more than 20 orders of magnitude less stable than their Pu(IV) analogues. This indicates that under reducing conditions, stable Pu(siderophore) complexes are unlikely to persist.     

Deviation between the chemistry of Ce(IV) and Pu(IV) and routes to ordered and disordered heterobimetallic 4f/5f and 5f/5f phosphonates

The heterobimetallic actinide compound UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O was prepared via the hydrothermal reaction of U(VI) and Ce(IV) in the presence of 1,2-phenylenediphosphonic acid. We demonstrate that this is a kinetic product that is not stable with respect to decomposition to the monometallic compounds. Similar reactions have been explored with U(VI) and Ce(III), resulting in the oxidation of Ce(III) to Ce(IV) and the formation of the Ce(IV) phosphonate, Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O, UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O, and UO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O. In comparison, the reaction of U(VI) with Np(VI) only yields Np[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O and aqueous U(VI), whereas the reaction of U(VI) with Pu(VI) yields the disordered U(VI)/Pu(VI) compound, (U(0.9)Pu(0.1))O(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O, and the Pu(IV) phosphonate, Pu[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. The reactions of Ce(IV) with Np(VI) yield disordered heterobimetallic phosphonates with both M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Np) and M[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Ce, Np) structures, as well as the Ce(IV) phosphonate Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. Ce(IV) reacts with Pu(IV) to yield the Pu(VI) compound, PuO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·3H(2)O, and a disordered heterobimetallic Pu(IV)/Ce(IV) compound with the M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Pu) structure. Mixtures of Np(VI) and Pu(VI) yield disordered heterobimetallic Np(IV)/Pu(IV) phosphonates with both the An[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Np, Pu) and An[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Np, Pu) formulas.     

Formation of higher chloride complexes of Np(IV) and Pu(IV) in water-stable room-temperature ionic liquid [BuMeIm][Tf2N

A UV/vis/near-IR spectroscopic study shows that in [BuMeIm][(CF3SO2)2N] hydrophobic room-temperature ionic liquid solutions, [BuMeIm]2[AnCl6] complexes, where BuMeIm+ is 1-n-butyl-3-methylimidazolium and An(IV) is Np(IV) or Pu(IV), have an octahedral An(IV) environment similar to that observed in solid complexes. Water has no influence on the absorption spectra of AnCl6(2-) complexes, indicating their stability to hydrolysis in ionic liquid. Adding [BuMeIm]Cl modifies the UV/vis/near-IR absorption spectra of An(IV) in the ionic liquid and causes solids to precipitate. The solid-state reflectance spectra of the precipitates reveal considerable differences from the corresponding An(IV) hexachloro complexes. A voltammetric study indicates that AnCl6(2-) complexes are electrochemically inert in [BuMeIm][(CF3SO2)2N] at the glassy carbon working electrode. By contrast, quasi-reversible electrochemical reduction An(IV)/An(III) and An(IV) oxidation are observed in ionic liquids in the presence of [BuMeIm]Cl. The oxidation wave of noncoordinated chloride ions interferes with the An(IV) oxidation waves. The spectroscopic and voltammetric data clearly indicate the formation of nonoctahedral actinide(IV) chloride complexes with a Cl-/An(IV) ratio exceeding 6/1 in [BuMeIm][(CF3SO2)2N] in excess chloride ions.     

Electrochemical and spectroscopic studies of Pu(IV) and Pu(III) in nitric acid solutions

Electrochemical and absorption spectroscopic properties of Pu(IV) and Pu(III) in nitric acid have been investigated by using cyclic voltammetry (CV) and UV–Visible spectroscopy. CV using a glassy carbon electrode suggested that the electrochemical reaction of Pu(IV) nitrate complexes were found to be a quasi-reversible reduction to Pu(III) species. The formal redox potentials (E ⁰) for Pu(IV)/Pu(III) couples were +0.721, +0.712, +0.706, +0.705, +0.704, 0.694, and +0.696 V (vs. Ag/AgCl) when nitric acid concentrations are 1–7 M nitric acid solutions, respectively. These results indicate that the reduction product of Pu(IV) is only Pu(III). Further details for reaction mechanism of Pu(IV) were discussed on the basis of digital simulation of the experimental cyclic voltammograms. The absorption spectroscopic properties of Pu(III) and Pu(IV) in nitric acid solutions were investigated with UV–Visible spectrophotometry. As a result, it was founds that the intensities of the characteristic absorption peaks of Pu(III) and Pu(IV) tend to decrease with increasing nitric acid concentration for 1–8 M, and the peaks positions shifted longer or shorter wavelengths depending on the complex-forming abilities of Pu(III) and Pu(IV) with an increase in the nitric acid concentration.     

Gas-phase coordination complexes of dipositive plutonyl, PuO2(2+): chemical diversity across the actinyl series

We report the first transmission of solvent-coordinated dipositive plutonyl ion, Pu(VI)O(2)(2+), from solution to the gas phase by electrospray ionization (ESI) of plutonyl solutions in water/acetone and water/acetonitrile. ESI of plutonyl and uranyl solutions produced the isolable gas-phase complexes, [An(VI)O(2)(CH(3)COCH(3))(4,5,6)](2+), [An(VI)O(2)(CH(3)COCH(3))(3)(H(2)O)](2+), and [An(VI)O(2)(CH(3)CN)(4)](2+); additional complex compositions were observed for uranyl. In accord with relative actinyl stabilities, U(VI)O(2)(2+) > Pu(VI)O(2)(2+) > Np(VI)O(2)(2+), the yields of plutonyl complexes were about an order of magnitude less than those of uranyl, and dipositive neptunyl complexes were not observed. Collision-induced dissociation (CID) of the dipositive coordination complexes in a quadrupole ion trap produced doubly- and singly-charged fragment ions; the fragmentation products reveal differences in underlying chemistries of plutonyl and uranyl, including the lower stability of Pu(VI) as compared with U(VI). Particularly notable was the distinctive CID fragment ion, [Pu(IV)(OH)(3)](+) from [Pu(VI)O(2)(CH(3)COCH(3))(6)](2+), where the plutonyl structure has been disrupted and the tetravalent plutonium hydroxide produced; this process was not observed for uranyl.     

Determining the distribution of Pu, Np, and U oxidation states in dilute NaCl and synthetic brine solutions

The effect of iron powder (Fe⁰) on the reduction of Pu(VI),Np(V), and U(VI) was investigated in dilute NaCl and synthetic brines. Thetotal concentrations and oxidation states of the actinides in these solutionswere monitored as functions of pC H +, Eh, and time using techniques includingVis/Near IR absorption spectrophotometry, solvent extraction, activity counting,and inductively coupled plasma spectroscopy-mass spectrometry (ICP-MS). Whenconcentrations were too low and the oxidation states could not be directlydetermined by spectrophotometry or solvent extraction, comparing the measuredconcentrations with the solubility of reference systems helped to define thefinal oxidation states. In general, the reduction was more rapid, and couldproceed further, in the dilute NaCl solution than in the brine solutions.The experimental observations can be summarized as follows: (1) in the diluteNaCl solutions (pC H + 7 to 12), all three actinides, Pu(VI), Np(V) and U(VI),were reduced to lower oxidation states (most likely the tetravalent state)within a few days to a few months in the presence of Fe⁰; (2) insynthetic brines containing Fe⁰ (pC H + 8 to 13), the reductionof Pu(VI) was much slower than in the dilute NaCl solution. The dominant oxidationstate of Pu in the brine solution was Pu(V), the concentration of which wascontrolled by the electrochemical potential and could probably be representedby a heterogeneous redox reaction PuO₂ . xH₂O(s) PuO₂ + +e ^—; (3) in synthetic brines containing Fe⁰ (pC H + 8 to 13), Np(V) was probably reduced to Np(IV) and precipitatedfrom the solution; (4) in synthetic brines containing Fe⁰ (pC H+ 8 to 13), no significant reduction of U(VI) was observed within 55 days.     

Interaction of Aluminium (III) with the f-Family Ions Np(VI), Pu(VI), Np(V), Np(IV), Pu(IV), Nd(III), and Am(III) in the Course of Simultaneous Hydrolysis

The interaction of Np(VI), Pu(VI), Np(V), Np(IV), Pu(IV), Nd(III), and Am(III) with Al(III) in solutions at pH 0–4 was studied by the spectrophotometric method. It was shown that, in the range of pH 3–4, the hydrolyzed forms of neptunyl and plutonyl react with the hydrolyzed forms of aluminium. In the case of Pu(VI), the mixed hydroxoaqua complexes (H₂O)₃PuO₂(-OH)₂Al(OH)(H₂O)₃ ²⁺ or (H₂O)₄PuO₂OAl(OH)(H₂O)₄ ²⁺ are formed at the first stage of hydrolysis. Np(VI) also forms similar hydroxoaqua complexes with Al(III). The formation of the mixed hydroxoaqua complexes was also observed when Np(IV) or Pu(IV) was simultaneously hydrolyzed with Al(III) at pH 1.5–2.5. The Np(IV) complex with Al(III) has, most likely, the formula (H₂O) _n (OH)Np(-OH)₂Al(OH)(H₂O)₃ ³⁺. At pH from 2 to 4.1 (when aluminium hydroxide precipitates), the Np(V) or Nd(III) ions exist in solutions with or without Al(III) in similar forms. When pH is increased to 5–5.5, these ions are almost not captured by the aluminium hydroxide precipitate.     

Sequential separation of actinides by ion chromatography coupled with on-line scintillation detection

The separation and measurement of actinides by ion chromatography (IC) coupled with on-line scintillation detection was investigated. Separation of (237)Np, (239)Pu, (241)Am, (244)Cm, (230)Th, and (233)U was accomplished using a Dionex CG5 guard column, CS5 separation column, and an elution program utilizing oxalic, diglycolic, and nitric acid eluents. Np(V) was eluted as a weak anionic oxalate complex or as free NpO(2)(+) cation, Am(III) and Cm(III) as anionic oxalate complexes, Pu(IV) and Th(IV) as nonionic diglycolate complexes, and U(VI) as a free uranyl cation. Response of the flow-cell detector was linear over the full range of activities tested (4-1500 Bq). The minimum detectable activities for the investigated analytes ranged from 3.6 Bq for (244)Cm to 5.4 Bq for (230)Th and (239)Pu. The corresponding minimum detectable concentrations based on a 1-L sample ranged from 3.6 to 5.4 KBq m(-3) (96 to 150 pCi L(-1)).     

Aqueous complexation of thorium(IV), uranium(IV), neptunium(IV), plutonium(III/IV), and cerium(III/IV) with DTPA

Aqueous complexation of Th(IV), U(IV), Np(IV), Pu(III/IV), and Ce(III/IV) with DTPA was studied by potentiometry, absorption spectrophotometry, and cyclic voltammetry at 1 M ionic strength and 25 °C. The stability constants for the 1:1 complex of each trivalent and tetravalent metal were calculated. From the potentiometric data, we report stability constant values for Ce(III)DTPA, Ce(III)HDTPA, and Th(IV)DTPA of log β(101) = 20.01 ± 0.02, log β(111) = 22.0 ± 0.2, and log β(101) = 29.6 ± 1, respectively. From the absorption spectrophotometry data, we report stability constant values for U(IV)DTPA, Np(IV)DTPA, and Pu(IV)DTPA of log β(101) = 31.8 ± 0.1, 32.3 ± 0.1, and 33.67 ± 0.02, respectively. From the cyclic voltammetry data, we report stability constant values for Ce(IV) and Pu(III) of log β(101) = 34.04 ± 0.04 and 20.58 ± 0.04, respectively. The values obtained in this work are compared and discussed with respect to the ionic radius of each cationic metal.