Determination of heavy metal complexes with humic substances by HPLC/ICP-MS coupling using on-line isotope dilution technique

An isotope dilution mass spectrometric (IDMS) method has been developed for the simultaneous determination of the complexes of 11 heavy metals (Ag, Cd, Cu, Mo, Ni, Pb, Tl, U, W, Zn and Zr) with humic substances (HS) by coupling HPLC with ICP-MS and applying the on-line isotope dilution technique. The HPLC separation was carried out with size exclusion chromatography. This HPLC/ICP-IDMS method was applied to samples from a brown water, ground water, sewage and seepage water as well as for a sample containing isolated fulvic acids. The total contents of heavy metals and of their complexes were analyzed in these samples with detection limits in the range of 5–110 ng/L. The analysis of heavy metal/HS complexes from the different waters resulted in characteristic fingerprints of the distribution pattern of heavy metals in the separated HS fractions. A comparison between the total heavy metal concentrations and their portions bound to humic substances showed distinct differences for the various metals. Simultaneous ¹²C detection was used for the characterization of HS complexes not identified by UV detection and for the determination of relative DOC concentrations of chromatographic peaks. Received: 21 February 1997 / Revised: 27 May 1997 / Accepted: 28 May 1997     

Simultaneous determination of arsenic, selenium and antimony species using HPLC/ICP-MS

A new method for the simultaneous separation and determination of four arsenic species [As(III), As(V), monomethylarsonic acid and dimethylarsinic acid], three selenium species [Se(IV), Se(VI) and selenomethionine] as well as Sb(III) and Sb(V) is presented. The speciation was achieved by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Chromatographic parameters such as the composition and pH of the mobile phase were optimised. Limits of detection are below 4.5 μg L^–1 (as element) for Sb(III) and the selenium species and below 0.5 μg L^–1 for the other species. Precisions of retention times were better than 2% RSD and of peak areas better than 8% RSD for all the species investigated. Received: 13 January 1999 / Accepted: 4 March 1999     

Simultaneous determination of arsenic, selenium and antimony species using HPLC/ICP-MS

A new method for the simultaneous separation and determination of four arsenic species [As(III), As(V), monomethylarsonic acid and dimethylarsinic acid], three selenium species [Se(IV), Se(VI) and selenomethionine] as well as Sb(III) and Sb(V) is presented. The speciation was achieved by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Chromatographic parameters such as the composition and pH of the mobile phase were optimised. Limits of detection are below 4.5 μg L^–1 (as element) for Sb(III) and the selenium species and below 0.5 μg L^–1 for the other species. Precisions of retention times were better than 2% RSD and of peak areas better than 8% RSD for all the species investigated.     

HPLC of humic substances fractionated by Flow FFF

This communication reports a study of the effect of ionic strength and electrolyte composition on fractions, separately collected by flow FFF, of a mixture of humic substances. Reverse phase HPLC analysis of three early eluting fractions suggests that the components released by the column behave as organic acids. The baseline‐resolved peaks of the first two fractions, subject to higher retention in solutions of lower pH and/or higher polarity, substantiate this suggestion. The fraction with larger components, as measured by flow FFF, also appears to contain acidic species. Their retention level, however, may not be accurately modulated by varying the mobile phase properties as these species are either totally retained in acidic phases or released before the void peak at pH ≥ 4.2. Besides showing the effective separation achieved in the flow FFF channel, this study reveals the pronounced difference in the physicochemical properties of some components of a humic mixture even with very close particle size.     

Retention behavior of humic substances in reversed phase HPLC

Recovery as well as appearance and abundance (in percent) of different fractions of humic substances are found to depend on injected sample amounts in reversed phase HPLC. Sample amounts have been varied both by varying sample concentration and sample volume. In case of lowest amounts injected only two fractions were obtained for a commercial humic acid sodium salt, i.e. one for excluded molecules and one for hydrophobic components. The abundance of excluded molecules decreases upon increasing amounts injected. Another three fractions are obtained upon increasing amount injected: a hydrophilic fraction and two hydrophobic ones. This behavior is explained by auxiliary equilibria between excluded components and humic molecules previously adsorbed on the stationary phase.     

Hyphenated HPLC/ICP-MS and HPLC/ICP-OES techniques for the characterization of metal and non-metal species

Ion-pair and ion-exchange chromatography were used for the separation of model substances like metal-EDTA and metal-peptide complexes. Real samples like food extracts and human serum were separated by size-exclusion chromatography. The HLPC/ICP coupling was simply realized by connecting the column outlet of the chromatographic system with the nebulizer of the element specific detection systems ICP-OES and ICP-MS, respectively. In food extracts a correlation was found between zinc and sulfur as well as between copper and phosphorus; all measured metals were exclusively present in the 10–14 kD range. Copper in the 68 kD region was found to be correlated with sulfur in serum.Dedicated to Prof. Dr. Wilhelm Fresenius on the occasion on his 80th birthday     

Labile/inert metal species in aquatic humic substances: an ion-exchange study

Summary An ion-exchange procedure has been developed for the analytical fractionation of metals (e.g. Al, Co, Cu, Fe, Mn, Ni, Pb, Zn) forming labile/inert complexes with aquatic humic substances (HS) isolated (XAD 2, XAD 8, ultrafiltration) from bog, forest, ground and lake water. Using 1-(2-hydroxyphenylazo)-2-naphthol groups immobilized on cellulose (Cellulose HYPHAN) as chelating collector (batch and column procedure, resp.) for reactive metal fractions in dissolved HS, the kinetics and the degree of separation (referred to the total metal content) serve for the operational characterization of the metal lability. According to the separation kinetics (96 h), mostly the reactivity order Mn>Zn>Co>Pb>Ni>CuAl>Fe is observed for the above metals in HS, resulting in recoveries of >98% for Mn and Zn, but strongly varying for the other metals (e.g., 44–95% Cu, 18–84% Fe). By means of cellulose HYPHAN four metal fractions (e.g. Cu) can be distinguished kinetically: (a) about 50% of Cu freshly complexed with HS are directly exchanged (2nd order kinetics, k=0.275 1 · mol^–1 · s^–1) followed by (b) a less labile fraction (20–30%) of 1st to 2nd order exchange; (c) a hardly reactive fraction (5–10%) revealing uniform half times t_1/2 of 25 h closes the Cu exchange from HS. Moreover the Cu fraction (d), being exchange-inert in HS, amounts to 5–10% and increases by slow transformation processes of the formed HS/Cu species.     

Thermofractography of humic substances

Thermofractography (TF) has been applied to humic and fulvic acids from four different soil types. Among the thermal products, 3,5-dihydroxybenzoic acid, catechol, 5-hydroxymethylfurfural, vanillin, phenol, furfural, guaiacol and indole were identified. These are typical fragments from lignins, microbial polyphenols, polysaccharides and proteins.Thermofractography appears to be an effective method for study of humic molecule structures by thermal degradation. Furthermore, it seems promising to differentiate humic acids from distinct soil types and to distinguish between humic and fulvic fractions.

---

Zusammenfassung Die Thermofraktographie (TF) wurde zur Analyse von Humin- und Fulvinsäuren aus vier verschiedenen Bodenarten eingesetzt. Unter den Produkten der Thermolyse wurden die 3,5-Dihydroxy-benzoesäure, Brenzkatechin, 5-Hydroxymethyl-furfurol, Vanillin, Phenol, Furfurol, Guaiakol und Indol identifiziert. Diese sind typische Fragmente aus Lignin, mikrobiellen Polyphenolen, Polysacchariden und Proteinen.Die Thermofraktoraphie scheint eine wirksame Methode zum Studium der Struktur des Huminmoleküls durch thermische Zersetzung zu sein. Außerdem scheint sie auch zur Unterscheidung von Huminsäuren aus bestimmten Bodentypen und zur Unterscheidung von Humin- und Fulvinfraktionen geeignet.

---

Résumé La thermofractographie (TF) a été appliquée à l'analyse des acides humiques et fulviques de quatre types différents de sols. L'acide 3,5-dihydroxybenzoïque, le pyrocatéchol, le 5-hydroxyméthyl-furfural, la vanilline, le phénol, le furfural, le guaacol et l'indole ont été identifiés parmi les produits de la thermolyse. Tous sont des fragments typiques des lignines, des polyphénols microbiens, des polysaccharides et des protéines.La thermofractographie paraît être une méthode efficace pour l'étude par dégradation thermique de la structure moléculaire des substances humiques. En outre, elle semble intéressante pour différencier les acides humiques dans les types de sols particuliers et pour distinguer les fractions humiques et fulviques.

---

( ) . 3.5- , , 5--, , , , . , , . , . , , .

---

---

F. J. G. V. thanks DAAD (Deutsche Akademischer Austauschdienst) for providing a grant.     

Accurate determination of element species by on-line coupling of chromatographic systems with ICP-MS using isotope dilution technique

The instrumental design for coupling different liquid chromatographic systems such as ion, reversed phase, and size exclusion chromatography as well as capillary gas chromatography, with ICP-MS for the determination of element species is described. For accurate analyses obtaining ‘real time’ concentrations of chromatographic peaks, the isotope dilution mass spectrometric (IDMS) technique is applied. Two different spiking modes are possible, one using species-specific and another one using species-unspecific spike solutions of isotope-enriched labelled compounds. The species-specific mode is only possible for element species well defined in their structure and composition, for example iodate or selenite, whereas the species-unspecific mode must be applied in all cases where the structure and composition of the species is unknown, for example, for metal complexes with humic substances. For accurate determinations by the isotope dilution technique the mass discrimination effect must also be taken into account. Iodate, iodide and organoiodine species, including those of humic substances, have been analysed in mineral, drinking and environmental water samples by coupling different liquid chromatographic methods with ICP-IDMS. Heavy metal complexes with humic substances in water samples of different origin have been characterized by size exclusion/ICP-IDMS. The possibilities of determining different environmental selenium species are discussed and the results for the analysis of selenite and selenate, which has been carried out by GC/ICP-IDMS after converting these species into a volatile piazselenol compound, are presented.     

Determination of organic and inorganic mercury species in water and sediment samples by HPLC on-line coupled with ICP-MS

This paper describes a preconcentration method for Hg²⁺ and MeHg⁺ in water samples using sodium diethyldithiocarbamate immobilized in polyurethane foam (PU-NaDDC) and an extraction method for several mercury species in sediment samples, including MeHg⁺, EtHg⁺ and PhHg⁺, which is simple, rapid, and uses a single organic solvent. Separation and measurement were done by high-performance liquid chromatography on-line with inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Initially, the test of recovery was applied using procedures compatible with HPLC. Under the optimum extraction conditions, recoveries of 96.7, 96.3 and 97.3% were obtained for MeHg⁺, EtHg⁺, and PhHg⁺, respectively, from n = 4 spiked sediment samples. This study also demonstrates that the combination of solid-phase extraction on PU-NaDDC with HPLC separation and ICP-MS detection is an effective preconcentration procedure for simultaneous measurement of Hg²⁺ and MeHg⁺ at ultra-trace levels in water samples. The application of the proposed procedure to the determination of mercury species in drinking water sample was investigated. The proposed method clearly gave satisfactory average recoveries between 93.7 and 101.5%.     

Determination of Bromate in Bottled Drinking Water from Saudi Arabian Markets by HPLC/ICP-MS

The determination of bromate BrO₃ ^? in 50 different bottled drinking water samples collected from Saudi Arabian markets has been investigated using liquid chromatography inductively coupled plasma mass spectrometry (HPLC/ICP-MS). For analysis, samples were injected directly without any further pretreatment or dilution, using only a 50 μL injection volume. The method showed: detection limit of 0.5 μg/L, limit of quantification of 1.0 μg/L, 1.0 ? 200.0 μg/L linearity range (r² = 0.9998), relative standard deviation (%RSD) for reproducibility (inter-day precision) values of 14% and 4% for low and high concentration levels (10,100 μg/L), respectively. The results obtained for bromate showed that 30% of the samples are acceptable as US EPA standards (10 μg/L), 40% of the samples are acceptable as Gulf (Saudi Arabia) standards (25 μg/L), and almost 60% of the samples exceed the allowable limits for bromate in bottled drinking water.     

Determination of biologically active substances in roasted coffees using a diode-array HPLC system.

We studied the simultaneous quantitative analysis of biologically active substances, such as nicotinic acid, trigonelline, caffeine, qunolinic acid and tannic acid and pyrogallic acid, in several roasted coffees by an HPLC/diode-array system with a home-made sol-gel and ODS-2 columns. A simple method for simultaneous quantitative analysis of biologically active substances in the coffee brew became feasible by an HPLC/diode-array system with a sol-gel column at a single wavelength of 210 nm. The most efficient condition of the Rs value was above 1.05 when two sol-gel columns were connected. In addition, the elution behavior of nicotinic acid in brew extracted from commercially available coffee beans suggests the thermal decomposition process during roasting, and indicated the maximum value for full city roasted coffee.     

Determination of the phenolic-group capacities of humic substances by non-aqueous titration technique

The phenolic-group capacities of five humic substances, such as, the Aldrich humic acid, the humic and fulvic acids extracted from a soil, the humic and fulvic acids extracted from a peat have been precisely determined by the non-aqueous potentiometric titration technique. The titration by KOH in the mixed solvent of DMSO:2-propanol:water = 80:19.3:0.7 at [K⁺] = 0.02 M enabled to measure the potential change in a wide range of pOH (=−log [OH⁻]), and thus to determine the capacities of phenolic groups which could not be precisely determined in the aqueous titration. The results of the titration revealed that the mean protonation constants of the phenolic groups were nearly the same for all humic substances and close to that of phenol in the same medium, indicating that each phenolic-group in the humic substances is rather isolated and is not electronically affected by other affecting groups in the humic macromolecule.     

Determination of some halogen osmium-carbonyl derivatives using ion-selective electrodes

Summary The concentrations of certain halogen derivatives of osmium carbonyls were determined potentiometrically by using a silver ion-selective electrode based potentiometric titration technique. In case of the series Os₃(CO)₁₂X₂, X= Cl, Br, I, inflections in the titration curves were at volumes of AgNO₃ corresponding to one halide ion. In contrast, the series Os₃(CO)₁₀X₂ gave inflections equivalent to two X^– ions. The concentrations of trans-Cl₂Os(CO)₄ as well as ClSnPh₃ were also determined by this technique. Standard deviations were in the range of 0.1%–0.37%, recoveries between 98% and 99.7%.

---

Bestimmung einiger Halogenosmiumcarbonylverbindungen mit Hilfe von ionenselektiven Elektroden

     

HG/LT-GC/ICP-MS coupling for identification of metal(loid) species in human urine after fish consumption

Human urine samples after fish consumption have been investigated by low-temperature gas chromatography with inductively coupled plasma mass spectrometric detection after sample derivatization by hydride generation (HG/LT-GC/ICP-MS). This analytical technique enabled the identification of organometal(loid) compounds in human urine; species of the six elements germanium, arsenic, selenium, tin, antimony, and mercury were determined. Three different organic selenium species, two germanium species, seven arsenic species, four tin species, five antimony species, and one species of mercury were found; 18 of the 22 species detected could be identified. The relative detection limits ranged between 2 and 12 pg x L(-1) (x=element). These organometal(loid) compounds probably build up in the human body under the influence of micro-organisms, in the presence of hydrogen sulfide and methane, in the human intestine.     

Influence of humic substances on sorption and methylation processes of inorganic- and organo-tin species

The influence of humic substances on sorption and methylation processes for inorganic- and organotin species is presented. Four sediment samples from different locations of the Rivers Elbe, Mulde and Spittelwasser, Germany, with different organotin and humic contents were selected to extract the humic and fulvic acids. The various fractions—the original sediment, the humic acid, the fulvic acid and the residual sediment—were analysed for their organotin content. The individual buyltin species show quite different distribution patterns. Monobutyltin is found mostly associated with humic acids. Dibutyltin shows a nonunique behaviour. At low total organotin content, dibutyltin is found bonded to humic and fulvic acids, whereas at high organotin content dibutyltin is distributed more with the residual sediment. Most of the tributyltin remains in the sediment unextracted; only small quantities of it are in the fulvic acid fraction. Tetrabutyltin is only in the humic acid fraction when it binds to humic matter; it mostly remains in the sediment. General observations indicate that ionic butyltin species bind to fulvic acids whereas the non-polar tetrabutyltin is not found in the fulvic acid fractions in any of the samples. The appearance of monomethyl- and dimethyl-tin species in the humic and fulvic acid fractions after the alkaline extraction was surprising. There is a correlation between the humic content of the sample and the formation of methyltin species. Evidence is provided by experiments that humic substances act as methylation agents.     

Development of an on-line isotope dilution technique with HPLC/ICP-MS for the accurate determination of elemental species

An on-line isotope dilution technique has been developed for use with a high performance liquid chromatography system (HPLC) coupled to an inductively coupled plasma mass spectrometer (ICP-MS). With this method it is possible to characterize elemental species at low concentration levels and to quantify them accurately. The possibilities of this method are shown using the examples of the determination of the interactions of different molecular weight fractions of dissolved organic matter (DOM) with copper and molybdenum in a natural water sample.     

Analytical chemistry of freshwater humic substances

Dissolved organic carbon (DOC) in aquatic environments represents one of the largest active organic carbon reservoirs in the biosphere. Current ideologies concerning the sources of DOC, how it is formed and utilized, and what determines the quality of DOC are examined. Humic substances can comprise a significant fraction of the DOC and developments in methods of analysis including the isolation and characterization of this fraction are reviewed.     

Stability studies of arsenic, selenium, antimony and tellurium species in water, urine, fish and soil extracts using HPLC/ICP-MS

The stability of arsenic, selenium, antimony and tellurium species in water and urine (NIST SRM 2670n) as well as in extracts of fish and soil certified reference materials (DORM-2 and NIST SRM 2710) has been investigated. Stability studies were carried out with As(III), As(V), arsenobetaine, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), phenylarsonic acid (PAA), Se(IV), Se(VI), selenomethionine, Sb(III), Sb(V) and Te(VI). Speciation analysis was performed by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Best storage of aqueous mixtures of the examined species was achieved at 3 degrees C whereas at -20 degrees C species transformation especially of selenomethionine and Sb(V) took place and a new selenium species appeared within a period of 30 days. Losses and species transformations during extraction processes were investigated. Extraction of the spiked fish material with methanol/water led to partial conversion of Sb(III), Sb(V) and selenomethionine to two new antimony and one new selenium species. The other arsenic, selenium and tellurium species were almost quantitatively extracted. For soil spiked with MMA, PAA, Se(IV) and Sb(III), recoveries after extraction with water and sulfuric acid (0.01 mol/L) were below 20%.