M3（CO）12（M=Fe,Ru,Os）的氧原子转移反应动力学

近期研究表明,M(CO)_6(M=Cr,Mo,W)与Me_3NO作用是缔合反应,Me_3NO中氧原子亲核进攻羰基碳,使其以CO_2的形式脱离金属原子,由此产生的活性中间体M(CO)_5与外来配体快速反应生成M(CO)_5L。有关金属原子簇羰基配合物的类似反应动力学研究尚未见报道。原子簇配合物可能表现出与单核配合物不同的反应性质,并且是有效的均相催化剂,进一步了解其与Me_3NO的反应性质颇有意义。本文报道在Me_3NO存在下M_3(CO)_(12)的CO取代反应(1)的研究结果(M=Fe,Ru,Os)。     

Me_3NO存在下Ir_4(CO)_(11)L(L=CO,PPh_3)的CO取代反应动力学研究

刊用FT-IR和UV技术跟踪反应进程,研究了在Me_3NO存在下Ir_4(CO)_(12)和Ir_4(CO)_(11)PPh_3分别在CHCl_3—C_2H_5OH和CHCl_3溶剂中取代羰基反应的动力学与机理。结果表明反应遵循二级速率定律:r=k_2[Me_3NO][配合物]。该速率方程与缔合机理相一致。将Ir_4(CO)_(11)L和Os_3(CO)_(11)L(L=CO,PPh_3)体系的动力学结果相比较,着重讨论了桥基因素对反应活性的影响。     

Me3NO存在下Ru3(CO)11L的CO取代反应动力学与机理

本文研究了在Me_3NO存在下Ru_3(CO)_(11)L(L_=PPh_3,PBu_3~n)的CO取代反应动力学,并提出了可能的机理。Ru_3(CO)_(11)L中的CO被配体L取代生成Ru_3(CO)_9L_3。当L=PPh_3,r=(k_1 k_2[Me_3NO])[Ru_3(CO)_(11)L];L=PBu_3~n,r=(k_1 k_2[PBu_3~n])[Ru_3(CO)_(11)L].除了涉及简单的离解机理外,还存在着按缔合机理进行的简单CO热取代与Me_3NO对Ru_3(CO)_(11)L中羰基碳的进攻。     

Me_3NO存在下Ru_3(CO_)_(11)L中配位羰基的竞争取代机理

本文研究了在Me_3NO存在下Ru_3(CO)_11L(L=PPh_3,PBu_3~n)的CO取代反应动力学,并提出了可能的机理.Ru_3(CO)_11L中的CO被配体L取代生成Ru_3(CO)_9L_3,其中L分别联到三个不同的Ru原子上.对于L=PPh_3,r=(k_1+k_2[M_3NO])[Ru_3(CO)_11L];L=PBu_3~n,r=(k_1+k_2[PBu+3~n])[Ru_3(CO)_11L).所提出的机理除了涉及简单的离解机理外.还存在着按缔合机理进行的简单CO热取代与Me_3NO对Ru_3(CO)_11L中羰基碳的进攻.     

Mo(CO)5L的氧原子转移反应动力学和机理研究

近期我们报道了M(CO)_2(M=Cr,Mo,W)与Me_2NO反应的动力学研究结果。 本文报道在CH_2Cl_2,-CH_2CN(体积比1:1)混合溶剂中,三甲胺氧化物存在下的二取代反应: Mo(CO)_5L Me_3NO L→顺-Mo(CO)_4L_2 Me_3N CO_3 (1)式中L=P(c-hx)_3,P(n-Bu)_3,NMe_3Pyr,PPh_3,AsPh_3,P(OEt)和P(OMe)_3,在金属原子不变的情况下对配体的电子效应(以Mo(CO)_5L的羰基伸缩振动频率表现出来)和立体效应做探讨。     

在(CH_3)_3NO的存在下Ru_3(CO)_(12)的CO取代反应动力学与机理

过渡金属羰基簇合物的动力学和机理研究是阐明催化过程和设计新羰基簇催化剂必不可少的基础理论工作。这一领域的研究,近年来受到广泛的重视,但现有的资料仅限于简单的热取代反应。本文研究了Ru_3(CO)_(12)在氧原子转移试剂Me_3NO-一种理想的脱羰试剂的存在下,CH_2Cl_2-C_2H_5OH混合溶剂中的CO被L[L=PPh_3、PB_(u3)~n、AsPh_3、P(OPh)_3]取代的动力学,并提出了反应机理。     

Os_3(CO)_(12)及其膦取代衍生物氧原子转移反应动力学与机理研究

报道了(CH_3)_3NO存在条件下Os_3(CO)_(12)和Os_3(CO)_11L(L=PPh_3,P(n-Bu)_3,AsPh_3)分别在CH_2Cl_2-C_2H_5OH和CH_2Cl_2溶剂中职代羰基反应的动力学数据。结果表明,反应遵循单项缔合速度定律,与外来配体L的浓度无关。定量地研究了溶剂中乙醇的浓度对反应速度的影响,并讨论了反应机理、过渡态和中间体可能的结构及取代配体的影响。     

金属羰基化合物M(CO)6(M=Cr,Mo, W)氧原子转移反应动力学与机理

本文研究了PPh3存在与不存在的情况下, M(CO)6(M=Cr, Mo, W)与三甲胺氧化物me3NO在CH2Cl2中的氧原子转移反应动力学. 反应速率遵循: r=k[M(CO)6][Me3NO], 并且rW>rMo>rCr, 并根据实验结果提出了反应机理, 讨论了溶剂对反应速率的影响.     

（CH3）3NO存在下M（CO）5（M＋Fe,Ru,Os）的CO取代反应动力学研究

在(CH_3)_3NO存在下,PPh_3取代M(CO)_5(M=Fe,Ru,Os)中CO的反应速度遵循二级速度定律,分别与[M(CO)_5]和[(CH_3)_3NO]的一次方成正比,与[PPh_3]无关。反应速度按FeRu>Os的次序约减小4倍。 1 实验方法 典型的动力学实验中,将(CH_3)_3NO的C_2H_5OH溶液和PPh_3的己烷溶液分别用注射器加到体积合适的烧瓶中,再注入Fe(CO)_5并迅速震荡烧瓶,再取出一部分反应液立即注入充N_2     

四甲基二硅桥连二（环己基环戊二烯基）四羰基二铁的合成、结构及热量排反应研究

1，2－二（环己基环戊二烯基）四甲基二硅烷与Fe(CO)_5在二甲苯中加热回流 生成二铁化合物(Me_2SiSiMe_2)[(c-C_6H_(11)-C_5H_3)Fe(CO)]_2(μ-CO)_2 （ 2）。通过柱层析分离到2的顺反两种异构体2c和2t，并分别进行热重排反应，发现 顺式底物2c重排生成反式重排产物[Me_2Si(c-C_6H_(11)C_5H_3)Fe(CO)_2]_2 （ 3t），而反式底物2t重排则生成顺式重排产物3c。这表明重排反应是立体专一性的 。通过X射线衍射分析测定了化合物2c和3t的晶体结构。     

Cyano-bridged Mn(III)3M(III) (M(III) = Fe, Cr) complexes: synthesis, structure, and magnetic properties

Two cyano-bridged tetranuclear complexes composed of Mn(III) salen (salen = N,N'-ethylene bis(salicylideneiminate)) and hexacyanometalate(III) (M = Fe, Cr) in a stoichiometry of 3:1 have been selectively synthesized using {NH2(n-C12H25)2}3[M(III)(CN)6] (M(III) = Fe, Cr) starting materials: [{Mn(salen)(EtOH)}3{M(CN)6}] (M = Fe, 1; Cr, 2). Compounds 1 and 2 are isostructural with a T-shaped structure, in which [M(CN)6]3- assumes a meridional-tridentate building block to bind three [Mn(salen)(EtOH)]+ units. The strong frequency dependence and observation of hysteresis on the field dependence of the magnetization indicate that 1 is a single-molecule magnet.     

Syntheses, structure, and magnetic properties of hexanuclear Mn(III)(2)M(III)(4) (M = Y, Gd, Tb, Dy) complexes

The synthesis and characterizations of a family of isomorphous [Mn(III)(2)M(III)(4)L(2)(μ(4)-O)(2)(N(3))(2)(CH(3)O)(2)(CH(3)OH)(4)(NO(3))(2)]·2H(2)O (M = Y(1), Gd(2), Tb(3), Dy(4)) are reported, where H(4)L = N,N'-dihydroxyethyl-N,N'-(2-hydroxy-4,5-dimethylbenzyl)ethylenediamine. They were obtained from the reactions of H(4)L with M(NO(3))(3)·6H(2)O, Mn(ClO(4))(2)·6H(2)O, NaN(3) and NEt(3) in a 1?:?1?:?1?:?2?:?2 molar ratio. The core structure consists of a Mn(2)M(4) unit. The four M(III) ions that are held together by two μ(4)-bridging oxygen atoms form a butterfly M(4) moiety. The M(4) core is further connected to the two five-coordinate trigonal-bipyramidal Mn(III) ions via one μ(4)-O(2-), two alkyloxo and one methoxo triple bridges. Magnetic susceptibility measurements indicate the presence of intramolecular antiferromagnetic interactions in complex 2, and overall intramolecular ferromagnetic interactions in complexes 3 and 4. The alternating current (AC) magnetic susceptibility studies revealed that complexes 3 and 4 showed frequency-dependent out-of-phase signals, which indicates that they exhibit slow relaxation of the magnetization.     

Ligand dependence of metal-metal bonding in the d(3)d(3) dimers M(2)X(9)(n-) (M(III) = Cr, Mo, W; M(IV) = Mn, Tc, Re; X = F, Cl, Br, I)

The ligand dependence of metal-metal bonding in the d(3)d(3) face-shared M(2)X(9)(n-) (M(III) = Cr, Mo, W; M(IV) = Mn, Tc, Re; X = F, Cl, Br, I) dimers has been investigated using density functional theory. In general, significant differences in metal-metal bonding are observed between the fluoride and chloride complexes involving the same metal ion, whereas less dramatic changes occur between the bromide and iodide complexes and minimal differences between the chloride and bromide complexes. For M = Mo, Tc, and Re, change in the halide from F to I results in weaker metal-metal bonding corresponding to a shift from either the triple metal-metal bonded to single bonded case or from the latter to a nonbonded structure. A fragment analysis performed on M(2)X(9)(3-) (M = Mo, W) allowed determination of the metal-metal and metal-bridge contributions to the total bonding energy in the dimer. As the halide changes from F to I, there is a systematic reduction in the total interaction energy of the fragments which can be traced to a progressive destabilization of the metal-bridge interaction because of weaker M-X(bridge) bonding as fluoride is replaced by its heavier congeners. In contrast, the metal-metal interaction remains essentially constant with change in the halide.     

Cyano-bridged pentanuclear Fe(III)3M(II)2 (M = Ni, Co, Fe) clusters: synthesis, structures, and magnetic properties

The reactions of [M(II)(Tpm(Me))(H2O)3]2+ (M = Ni, Co, Fe; Tpm(Me) = tris(3,5-dimethyl-1-pyrazoyl)methane) with [Bu4N][(Tp)Fe(III)(CN)3] (Bu4N+ = tetrabutylammonium cation; Tp = tris(pyrazolyl)hydroborate) in MeCN-Et2O afford three pentanuclear cyano-bridged clusters, [(Tp)3(Tpm(Me))2Fe(III)3M(II)2(CN)9]ClO4.15H2O (M = Ni, 1; M = Co, 2) and [(Tp)3(Tpm(Me))2Fe(III)3Fe(II)2(CN)9]BF4.15H2O (3). Single-crystal X-ray analyses reveal that they show the same trigonal bipyramidal structure featuring a D3h-symmetry core, in which two opposing Tpm(Me)-ligated M(II) ions situated in the two apical positions are linked through cyanide bridges to an equatorial triangle of three Tp-ligated Fe(III) (S = 1/2) centers. Magnetic studies for complex 1 show ferromagnetic coupling giving an S = 7/2 ground state and an appreciable magnetic anisotropy with a negative D(7/2) value equal to -0.79 cm(-1). Complex 2 shows zero-field splitting parameters deducted from the magnetization data with D = -1.33 cm(-1) and g = 2.81. Antiferromagnetic interaction was observed in complex 3.     

Superelectrophilic tetrakis(carbonyl)palladium(II)- and -platinum(II) undecafluorodiantimonate(V), [Pd(CO)4][Sb(2)F(11)]2 and [Pt(CO)4][Sb(2)F(11)]2: syntheses, physical and spectroscopic properties, their crystal, molecular, and extended structures, and density functional calculations: an experimental, computational, and comparative study .

The salts [M(CO)(4)][Sb(2)F(11)](2), M = Pd, Pt, are prepared by reductive carbonylation of Pd[Pd(SO(3)F)(6)], Pt(SO(3)F)(4) or PtF(6) in liquid SbF(5), or HF-SbF(5). The resulting moisture-sensitive, colorless solids are thermally stable up to 140 degrees C (M = Pd) or 200 degrees C (M = Pt). Their thermal decompositions are studied by differential scanning calorimetry (DSC). Single crystals of both salts are suitable for an X-ray diffraction study at 180 K. Both isostructural salts crystallize in the monoclinic space group P2(1)/c (No. 14). The unit cell volume of [Pt(CO)(4)][Sb(2)F(11)](2) is smaller than that of [Pd(CO)(4)][Sb(2)F(11)](2) by about 0.4%. The cations [M(CO)(4)](2+), M = Pd, Pt, are square planar with only very slight angular and out-of-plane deviations from D(4)(h)() symmetry. The interatomic distances and bond angles for both cations are essentially identical. The [Sb(2)F(11)](-) anions in [M(CO)(4)][Sb(2)F(11)](2,) M = Pd, Pt, are not symmetry-related, and both pairs differ in their Sb-F-Sb bridge angles and their dihedral angles. There are in each salt four to five secondary interionic C- -F contacts per CO group. Of these, two contacts per CO group are significantly shorter than the sum of the van der Waals radii by 0.58 - 0.37 A. In addition, structural, and spectroscopic details of recently synthesized [Rh(CO)(4)][Al(2)Cl(7)] are reported. The cations [Rh(CO)(4)](+) and [M(CO)(4)](2+), M = Pd, Pt, are characterized by IR and Raman spectroscopy. Of the 16 vibrational modes (13 observable, 3 inactive) 10 (Pd, Pt) or 9 (Rh), respectively, are found experimentally. The vibrational assignments are supported by DFT calculations, which provide in addition to band positions also intensities of IR bands and Raman signals as well as internal force constants for the cations. (13)C NMR measurements complete the characterization of the square planar metal carbonyl cations. The extensive characterization of [M(CO)(4)][Sb(2)F(11)](2), M = Pd, Pt, reported here, allows a comparison to linear and octahedral [M(CO)(n)()][Sb(2)F(11)](2) salts [M = Hg (n = 2); Fe, Ru, Os (n = 6)] and their derivatives, which permit a deeper understanding of M-CO bonding in the solid state for superelectrophilic cations with [Sb(2)F(11)](-) or [SbF(6)](-) as anions.     

Synthesis and structural characterization of bi- and trimetallic octacyanometalate(IV) complexes: [Delta,Lambda-MII(en)3][cis-MII(en)2(OH2)][MIV(CN)8].2H2O and [cis-MII(en)2(OH2)]2[(mu-NC)2MIV(CN)6].4H2O (MII = Mn, Co, Ni; MIV = Mo, W)

Treatment of [M(II)(en)(3)][OTs](2) or methanolic ethylenediamine solutions containing transition metal p-toluenesulfonates (M(II) = Mn, Co) with aqueous K(4)M(IV)(CN)(8).2H(2)O or Cs(3)M(V)(CN)(8) (M(IV) = Mo, W; M(V) = Mo) affords crystalline clusters of [M(II)(en)(3)][cis-M(II)(en)(2)(OH(2))(mu-NC)M(IV)(CN)(7)].2H(2)O (M(IV) = Mo; M(II) = Mn, 1; Ni, 5; M(IV) = W; M(II) = Mn, 2; Ni, 6) and [cis-M(II)(en)(2)(OH(2))](2)[(mu-NC)(2)M(IV)(CN)(6)].4H(2)O (M(IV) = Mo; M(II) = Co, 3; Ni, 7; M(IV) = W; M(II) = Co, 4) stoichiometry. Each cluster contains cis-M(II)(en)(2)(OH(2))(mu-NC)(2+) units that likely result from dissociative loss of en from [M(II)(en)(3)](2+), affording cis-M(II)(en)(2)(OH(2))(2)(2+) intermediates that are trapped by M(IV)(CN)(8)(4-).     

Synthesis, structure, and multi-NMR studies of (Me4N)[A(M(SC(O)Ph)3)2] (A = Na, M = Hg; A = K, M = Cd or Hg)

The compounds (Me4N)[A(M(SC(O)Ph)3)2] (A = K, M = Cd (2); A = Na, M = Hg (3); and A = K, M = Hg (4)) were synthesized by reacting the appropriate metal chloride with A+PhC(O)S- and Me4NCl in the ratios 1:3:1 and 2:6:1. The structures of these compounds were determined by single-crystal X-ray diffraction methods. All the compounds are isomorphous, isostructural, and crystallized in the space group P1 with Z = 1. Single-crystal data for 2: a = 106670(2) A, b = 111522(2) A, c = 119294(2) A, alpha = 71782(1) degrees, beta = 85208(1) degrees, gamma = 69418(1) degrees, V = 126140(4) A3, Dcalc = 1528 g cm-3. Single-crystal data for 3: a = 10840(2) A, b = 10946(4) A, c = 12006(3) A, alpha = 7218(2) degrees, beta = 8675(2) degrees, gamma = 6743(2) degrees, V = 12493(6) A3, Dcalc = 1756 g cm-3. Single-crystal data for 4: a = 104780(1) A, b = 112563(2) A, c = 119827(2) A, alpha = 71574(1) degrees, beta = 85084(1) degrees, gamma = 70705(1) degrees, V = 126523(3) A3, Dcalc = 1755 g cm-3. In the [A(M(SC(O)Ph)3)2]- anions, each M(II) atom is bonded to three thiobenzoate ligands through sulfur atoms, giving a trigonal planar MS3 geometry. The carbonyl oxygen atoms from the two [M(SC(O)Ph)3]- anions are bonded to the alkali metal atom, providing an octahedral environment. Solution metal NMR studies showed the concentration-dependent dissociation of the alkali metal ions in the trinuclear anions.     

Heterobimetallic oxalato-bridged M(II)Re(IV) complexes (M = Mn,Fe, Co,Ni): synthesis,crystal structure,and magnetic properties

Four rhenium(IV)-M(II) bimetallic complexes of formula [ReCl(4)(mu-ox)M(dmphen)(2)].CH(3)CN with M = Mn (1), Fe (2), Co (3), and Ni (4) (ox = oxalate anion, dmphen = 2,9-dimethyl-1,10-phenanthroline) have been synthesized and the crystal structures of 1 and 3 determined by single-crystal X-ray diffraction. 1 and 3 are isostructural and crystallize in the monoclinic system, space group P2(1)/c, with a = 16.008(4) A, b = 12.729(2) A, c = 18.909(5) A, beta = 112.70(2) degrees, and Z = 4 for 1 and a = 15.998(4) A, b = 12.665(2) A, c = 18.693(5) A, beta = 112.33(2) degrees, and Z = 4, for 3. The structure of 1 and 3 is made up of neutral [ReCl(4)(mu-ox)M(dmphen)(2)] bimetallic units (M = Mn (1), Co (3)) and acetonitrile molecules of crystallization. M(II) and Re(IV) metal ions exhibit distorted octahedral coordination geometries being bridged by a bis(bidentate) oxalato ligand. The magnetic behavior of 1-4 has been investigated over the temperature range 2.0-300 K. A very weak antiferromagnetic coupling between Re(IV) and Mn(II) occurs in 1 (J = -0.1 cm(-)(1)), whereas a significant ferromagnetic interaction between Re(IV) and M(II) is observed in 2-4 [J = +2.8 (2), +5.2 (3), and +5.9 cm(-)(1) (4)].     

Heterovalent Au(III)-M(I) (M=Cu, Ag, Au) complexes derived from incorporation of [Au(tdt)2]- (tdt = toluene-3,4-dithiolate) with [M2(dppm)2]2+ (dppm = Bis(diphenylphosphino)methane)

Polynuclear heterovalent Au(III)-M(I) (M = Cu, Ag, Au) cluster complexes [Au(III)Cu(I)8(mu-dppm)3(tdt)5]+ (1), [Au(III)3Ag(I)8(mu-dppm)4(tdt)8]+ (2), and [Au(III)Au(I)4(mu-dppm)4(tdt)2]3+ (3) were prepared by reaction of [Au(III)(tdt)2]- (tdt = toluene-3,4-dithiolate) with 2 equiv of [M(I)2(dppm)2]2+ (dppm = bis(diphenylphosphino)methane). Complex 3 originates from incorporation of one [Au(III)(tdt)2]- with two [Au(I)2(dppm)2]2+ components through Au(III)-S-Au(I) linkages. Formation of complexes 1 and 2, however, involves rupture of metal-ligand bonds in the metal components and recombination between the ligands and the metal atoms. The Au(tdt)2 component connects to four M(I) atoms through Au(III)-S-M(I) linkages in syn and anti conformations in complexes 1 (M = Cu) and 3 (M = Au), respectively, but in both syn and anti conformations in complex 2 (M = Ag). The tdt ligand exhibits five types of bonding modes in complexes 1-3, chelating Au(III) or M(I) atoms as well as bridging Au(III)-M(I) or M(I)-M(I) atoms in different orientations. Although complexes 1 and 2 are nonemissive, Au(III)Au(I)(4) complex 3 shows room-temperature luminescence with emission maximum at 555 nm (tau(em) = 3.1 micros) in the solid state and at 570 nm (tau(em) = 1.5 micros) in acetonitrile solution.