Micellanized spectrophotometric method for the determination of beryllium using haematoxylin

A simple and sensitized spectrophotometric method for the determination of trace amounts of beryllium has been described. The method is based on the formation of a ternary complex by the reaction of beryllium with haematoxylin in the presence of micellar medium (cationic surfactant, cetyltrimethylammonium bromide). The ternary complex of beryllium has a maximum absorbance at 592 nm and showed an excellent sensitivity (molar absorption coefficient of 7.07 x 10(4)L mol(-1)cm(-1) and the Sandell's sensitivity being 1.27 x 10(-4) microg cm(-2)) and reproducibility (within-day precision: R.S.D.相似文献   

Automated filter paper assay for determination of cellulase activity

Recent developments in molecular breeding and directed evolution have promised great developments in industrial enzymes as demonstrated by exponential improvements in β-lactamase and green fluorescent protein (GFP). Detection of and screening for improved enzymes are relatively easy if the target enzyme is expressible in a suitable high-throughput screening host and a clearly defined and usable screen or selection is available, as with GFP and β-lactamase. Fungal cellulases, however, are difficult to measure and have limited expressibility in heterologous hosts. Furthermore, traditional cellulase assays are tedious and time-consuming. Multiple enzyme components, an insoluble substrate, and generally slow reaction rates have plagued cellulase researchers interested in creating cellulase mixtures with increased activities and/or enhanced biochemical properties. Although the International Union of Pure and Applied Chemists standard measure of cellulase activity, the filter paper assay (FPA), can be reproduced in most laboratories with some effort, this method has long been recognized for its complexity and susceptibility to operator error. Our current automated FPA method is based on a Cyberlabs C400 robotics deck equipped with customized incubation, reagent storage, and plate-reading capabilities that allow rapid evaluation of cellulases acting on cellulose and has a maximum throughput of 84 enzyme samples per day when performing the automated FPA.     

One‐step zymogram method for the simultaneous detection of cellulase/xylanase activity and molecular weight estimation of the enzyme

Here, we describe a zymographic method for the simultaneous detection of enzymatic activity and molecular weight (MW) estimation, following a single electrophoresis step. This involved separating cellulase and xylanase activities from bacteria and fungi, obtained from different sources, such as commercial extracts, crude extract and purified proteins, under denaturing conditions, by 10% polyacrylamide gel electrophoresis, using polyacrylamide gels copolymerized with 1% (w/v) carboxymethylcellulose or beechwood xylan as substrates. Then, enzymes were refolded by treatment with 2.5% Triton X‐100 in an appropriate buffer for each enzymatic activity, and visualized by Coomassie blue staining for MW estimation. Finally, Congo red staining revealed bio‐active cellulase and xylanase bands after electrophoretic separation of the proteins in the preparations. This method may provide a useful additional tool for screening of particular cellulase and xylanase producers, identification and MW estimation of polypeptides that manifest these activities, and for monitoring and control of fungal and bacterial cellulase and xylanase production.     

A composite thin film optical sensor for dissolved oxygen in contaminated aqueous environments

A robust optical composite thin film dissolved oxygen sensor was fabricated by ionically trapping the dye ruthenium(II) tris(4,7-diphenyl-1,10-phenanthroline) dichloride in a blended fluoropolymer matrix consisting of Nafion^® and Aflas^®. Strong phosphorescence, which was strongly quenched by dissolved oxygen (DO), was observed when the sensor was immersed in water. The sensor was robust, optically transparent, with good mechanical properties. Fast response, of a few seconds, coupled with sensitivity of about 0.1 mg L⁻¹ (DO) over the range 0-30 mg L⁻¹ and resistance to leaching, were also exhibited by this system. The Stern-Volmer (SV) plot exhibited slight downward turning at all oxygen concentrations. A linear plot was obtained when the SV equation was modified to account for the varying sensitivity of dye molecules in the matrix to the quencher. Good long term stability was observed.     

Spectroscopic characterization of the stabilising activity of migrating HALS in a pigmented PP/EPR blend

In previous work, the FT-IR maximum of absorption of a low molecular weight HALS containing a sebacate structure was reported to shift from 1738 to 1732 cm⁻¹ during the photo-aging of polypropylene. Previous studies have shown that the reduced mobility of the molecule caused the absorption to shift towards lower frequencies while decreasing its stabilizing activity. This paper presents further results evidencing the loss of activity of the low molecular weight HALS and proposes a novel mechanistic interpretation for the observed spectral shift.     

Benzeneacetaldehyde-4-hydroxy-alpha-oxo-aldoxime as a new analytical reagent for the spectrophotometric determination of cobalt

Benzeneacetaldehyde-4-hydroxy-α-oxo-aldoxime is proposed as a new sensitive and selective reagent for the spectrophotometric determination of cobalt. The reagent reacts with cobalt in the pH range 8.6–9.4 to form a yellow colored 1:3 chelate which is very well extracted in chloroform. Beer's law is obeyed in the concentration range 0.05–1.3 μg ml⁻¹ cobalt. The molar absorptivity of the extracted species is 2.746×10⁴ l mol⁻¹ cm⁻¹ at 390 nm. The proposed method is highly sensitive, selective, simple, rapid, accurate and has been satisfactorily applied for the determination of cobalt in synthetic mixtures, pharmaceutical samples, biological samples and alloys.     

Extraction and spectrophotometric determination of titanium(IV) withN 1-hydroxy-N 1,N 2-diphenylbenzamidine and thiocyanate

A precise, reliable, sensitive, and selective method for the determination of titanium(IV) is described. Titanium(IV) reacts withN ¹-hydroxy-N ¹,N ²-diphenylbenzamidine (HDPBA) and thiocyanate to form an orange-coloured mixed-ligand complex of stoichiometry 112 (Ti SCN^– HDPBA). The complex is quantitatively extractable into toluene from 0.05–0.15M hydrochloric acid. The spectrum of the complex exhibits an absorption maximum at 400 nm with a molar absorptivity of 20000M ^–1 cm^–1 and the coloured system obeys Beer's law in the concentration range 0.20–3.0 gml^–1 titanium. The effects of foreign ions and of various experimental parameters have been studied to establish the optimum conditions for the extraction and determination of titanium. The precision of the method has been evaluated and the relative standard deviation has been found to be 0.53%. The method has been successfully applied to the determination of titanium in synthetic matrices corresponding to titanium-containing ores, minerals, and alloys.     

A sensitive spectrophotometric method for the determination of dithiocarbamate fungicide and its application in environmental samples

A sensitive spectrophotometric method based on the evolution of CS₂ and colour development by leuco crystal violet is described for the determination of dithiocarbamate fungicides, e.g. thiram, ziram and zineb. Dithiocarbamate fungicides release CS₂ on acid hydrolysis. This CS₂ is absorbed in ethanolic sodium hydroxide and forms xanthate. The xanthate formed is subsequently treated with potassium iodate and N-chlorosuccinimide, during which free iodine is liberated. Crystal violet dye was formed through selective oxidation of leuco crystal violet by liberated iodine, which has an absorbance maxima at 595 nm. The colour systems obey Beer's law in the range of 0.02–0.20, 0.02–0.24 and 0.04–0.32 ppm for thiram, ziram and zineb respectively. The molar absorptivity of the colour system were found to be 9.6×10⁵, 1.1×10⁶ and 6.8×10⁵±100 l mol⁻¹ cm⁻¹ for thiram, ziram and zineb respectively. The method has been successfully applied to the determination of these dithiocarbamate fungicides in various environmental samples.     

A simple method for the spectrophotometric determination of atrazine using p-aminoacetophenone and its application in environmental and biological samples

A spectrophotometric method is described for the determination of the widely used herbicide, atrazine. Atrazine reacts with pyridine and forms a quaternary halide which adds a hydroxyl group in the presence of alkali to form a carbinol base. The heterocyclic ring of the resulting carbinol breaks forming a glutaconic dialdehyde which is subsequently coupled with p-aminoacetophenone (PMP) to form a yellow orange polymethine dye. Beer's law is obeyed in the range 0.16–1.6 ppm of atrazine at 470 nm. The method is sensitive and free from the interference of most of the foreign species. The analytical parameters have been optimised and the method has been successfully applied to the determination of atrazine in various environmental and biological samples.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Synthesis and efficiency of 5-(2-hydroxyphenylazo)-indazoles as new reagents for the determination of vanadium

Summary Four azo compounds based on 5-aminoindazole have been synthesized and characterized by elemental analysis as well as different spectroscopic techniques. The potentiality of the prepared compounds as new chromophoric reagents for the spectrophotometric determination of VO ₂ ⁺ was studied by extensive investigation of optimum conditions favouring the formation of the coloured complexes. The effect of interfering ions on the determination of VO ₂ ⁺ was investigated.Beer's law is obeyed in the concentration range of 1.0–12 µg/ml. The detection limits are 0.8, 0.9, 0.7, and 1.1 µg/ml using reagent1a,1b,1c, and1d, respectively. The standard deviations of the proposed method are 0.098, 0.111, 0.089, and 0.078. The molar absorptivities are 5.8, 6.7, 6.1, and 8.2×10³l·mol^–1·cm^–1 for1a–d, respectively, whereasSandell sensitivities are found to be 0.0187, 0.0163, 0.0174, and 0.0146 µg·cm^–2 using the same reagents. The ability of using these reagents as metallochromic reagents in complexon III titrations was also studied.

---

Synthese und Leistungsfähigkeit von 5-(Hydroxyphenylazo)-indazolen als neue Reagentien zur Bestimmung von Vanadium

Zusammenfassung Vier von 5-Aminoindazol abgeleitete Azoverbindungen wurden synthetisiert und mittels Elementaranalyse sowie mit Hilfe verschiedener spektroskopischer Techniken charakterisiert. Die Einsatzmöglichkeiten der Verbindungen als Reagentien zur spektrophotometrischen Bestimmung von VO ₂ ⁺ wurde durch ausführliche Untersuchungen zur Ermittlung der optimalen Bedingungen für die Ausbildung der gefärbten Komplexe ausgetestet. Der Einfluß von Fremdionen auf die Ergebnisse wurde ebenfalls untersucht. DasBeer'sche Gesetz wird im Konzentrationsbereich von 1.0–12µg/ml befolgt. Die Nachweisgrenzen liegen bei 0.8, 0.9, 0.7 und 1.1 µg/ml für die Reagentien1a–d. Die entsprechenden Standardabweichungen betragen 0.098, 0.111, 0.089 und 0.078. Die Komplexe zeigen molare Extinktionen von 5.8, 6.7, 6.1 und 8.2×10³l·mol^–1·cm^–1 und Empfindlichkeiten nachSandell von 0.0187, 0.0163, 0.0174 und 0.0146 für die jeweiligen Verbindungen1a–d. Die Verwendungsmöglichkeit der neuen Verbindungen als metallochrome Reagentien bei Titrationen mit Komplexon III war ebenfalls Gegenstand der Untersuchungen.

     

Synthesis,spectroscopic properties,and antimicrobial activity of some new 5-phenylazo-6-aminouracil-vanadyl complexes

Six complexes, [VO(L¹-H)₂]?·?5H₂O (1), [VO(OH)(L^2,3?H)(H₂O)]?·?H₂O (2,3), [VO(OH)(L^4,5?H)(H₂O)]?·?H₂O (4,5), [VO(OH)(L⁶?H)(H₂O)]?·?H₂O (6), were prepared by reacting different derivatives of 5-phenylazo-6-aminouracil ligands with VOSO₄?·?5H₂O. The infrared and ¹H NMR spectra of the complexes have been assigned. Thermogravimetric analyses (TG, DTG) were also carried out. The data agree quite well with the proposed structures and show that the complexes were finally decomposed to the corresponding divanadium pentoxide. The ligands and their vanadyl complexes were screened for antimicrobial activities by the agar-well diffusion technique using DMSO as solvent. The minimum inhibitory concentration (MIC) values for 1–4 and 6 were calculated at 30°C for 24–48?h. The activity data show that the complexes are more potent antimicrobials than the parent ligands.     

Evaluation and optimization of solid adsorbents for the sampling of gaseous methylated mercury species

This study evaluates the suitability of commercially available adsorbents for the measurement of gaseous organic mercury species namely monomethylmercury (MMHg) and dimethylmercury (DMHg).     

Nuclear magnetic resonance of donor atoms as a tool for determination of the structure of platinum metal complexes in solutions

Data on the NMR spectroscopy of C, N, O, Si, P, and Sn donor atoms of platinum metal complexes in solutions are surveyed. The chemical shift of a donor atom mainly depends on the ligand in the trans-position (due to the trans-effect). The chemical shift of a donor atom on a particular coordinate of the complex (coordinate shift, CSh) is an attribute of this coordinate and can be used to identify such a coordinate in platinum metal complexes and to determine the structures of complexes. Based on the known data, CSh diagrams were composed for ¹H, ¹³C, ¹⁴N, ¹⁷O, ¹⁹F, ³¹P, and ¹¹⁹Sn. Examples of using the CShs for determining the structures of platinum metal complexes in solutions are presented.     

Development of an ultrasensitive electrochemiluminescence inhibition method for the determination of tetracyclines

An electrochemiluminescence (ECL) inhibition method is developed for quantitative determination of four tetracyclines (TCs) in honey samples, including tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC) and doxycycline (DC). It was found that the four TCs strongly inhibited the ECL signal of the Ru(bpy)₃²⁺/DBAE system. Based on the ECL signal changes, a simple and ultrasensitive detection method for TCs was thus established. The optimum experimental conditions including the scan mode and scan rate of the applied potential, the type of the buffer solution and its pH, and the concentration of Ru(bpy)₃²⁺ and DBAE for the ECL inhibition method, were investigated in detail. Under the optimized conditions, the quenched ECL intensity versus the logarithm of the concentration of TCs is in good linear relationship over a concentration range from 4.0 × 10⁻¹¹ to 4.0 × 10⁻⁹ g mL⁻¹. The detection limits were found to be 2.0 × 10⁻¹² g mL⁻¹. The results obtained by the proposed ECL system, in terms of sensitivity, were much better than those of previously reported methods. In addition, the method was applied successfully to determine the total residuals of the four TCs in honey samples. The relative standard deviations were found in a range of 4.9–14.3%, and the recoveries were obtained from 87.5% to 115.0%. A possible mechanism for the quenching effects of Ru(bpy)₃²⁺/DBAE system was also proposed.     

A new semi-empirical kinetic method for the determination of ion exchange constants for the counterions of cationic micelles

A new method, based upon semi-empirical kinetic approach, for the determination of ion exchange constant for ion exchange processes occurring between counterions at the cationic micellar surface is described in this review article. Basically, the method involves a reaction kinetic probe which gives observed pseudo-first-order rate constants (k_obs) for a nucleophilic substitution reaction between the nonionic and anionic reactants (R and S) in the presence of a constant concentration of both reactants as well as cationic micelles and varying concentrations of an inert inorganic or organic salt (MX). The observed data (k_obs, versus [MX]) fit satisfactorily (in terms of residual errors) to an empirical equation which could be derived from an equation explaining the mechanism of the reaction of the kinetic probe in terms of pseudophase micellar (PM) model coupled with another empirical equation. This (another) empirical equation explains the effect of [MX] on cationic micellar binding constant (K_S) of the anionic reactant (say S) and gives an empirical constant, K_X/S. The magnitude of K_X/S is the measure of the ability of X⁻ to expel S⁻ from a cationic micellar pseudophase to the bulk aqueous phase through ion exchange X⁻/S⁻. The values of K_X/S and K_Y/S (where Y⁻ is another inert counterion) give the ion exchange constant, K_X^Y (= K_X/K_Y where K_X and K_Y represent cationic micellar binding constants of X⁻ and Y⁻, respectively). The suitability of this method is demonstrated by the use of three different reaction kinetic probes and various MX.     

An amperometric method for the detection of amitrole, glyphosate and its aminomethyl-phosphonic acid metabolite in environmental waters using passive samplers

The herbicides amitrole and glyphosate, and its metabolite aminomethyl-phosphonic acid (AMPA), in water samples have been directly analysed by high-performance liquid chromatography using an electrochemical (EC) detector. Limits of detection of 0.3 μg mL⁻¹ for glyphosate, 0.05 μg mL⁻¹ for AMPA and 0.03 μg mL⁻¹ for amitrole were comparable to those obtained by other authors using EC and also by liquid chromatography coupled to mass spectrometry, but the latter method requires derivatisation and pre-concentration of the sample whereas EC methods show similar sensitivity without the need of any derivatisation. The method was specifically designed to analyse extracts from passive samplers used for monitoring of polar herbicide residues in waters. To this purpose, three types of Empore^® disks were tested for their ability to adsorb and desorb these ionic, polar analytes. A procedure for their extraction from the membranes and reducing the interferences from other substances present in natural waters (i.e. humic acids) is described. The method is simple, does not require sophisticated equipment and is valid for the analysis and monitoring of herbicides residues using passive samplers.     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

A novel method for the determination of Pb2+ based on the quenching of the fluorescence of CdTe quantum dots

A novel method for the determination of Pb²⁺ has been developed based on quenching of the fluorescence of thiol-capped CdTe quantum dots (QDs) by Pb²⁺ in aqueous solutions. Under optimum conditions, the relative fluorescence intensity was linearly proportional to the concentration of Pb²⁺ between 2.0 × 10⁻⁶ and 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 2.7 × 10⁻⁷ mol L⁻¹. The relative standard deviation (RSD) was 4.6% for a 4.0 × 10⁻⁵ mol L⁻¹ Pb²⁺ solution (N = 5). As an application, the proposed method was successfully applied to the analysis of Pb²⁺ in food samples, and the results were satisfactory, i.e. consistent with those of flame atomic absorption spectrometry (FAAS). Correspondence: Heyou Han, College of Science, Institute of Chemical Biology, State Key Laboratory of Agricultural Microbiology, Huazhong Agricultural University, Wuhan 430070, P.R. China