双敏性微凝胶的絮凝及聚沉行为

用沉降聚合法制备了聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)微凝胶, 并用NMR, DLS分析测定了微凝胶结构及凝胶颗粒在不同离子强度下粒径和表面电势的变化. 25 ℃时在pH＝7的溶液中Zeta电位为－18 mV, 随离子强度增加, 逐渐减小. 当NaCl浓度达0.2 mol/L时基本不变, 表明微凝胶表面电荷受到屏蔽, 浓度继续增加主要使凝胶颗粒收缩. 加热引起微凝胶收缩, 颗粒表面电荷密度增大, Zeta电位增大. 在0.2 mol/L NaCl溶液中, 41 ℃时微凝胶的Zeta电位可达－12.4 mV, 使微凝胶稳定. 较高离子强度时, Zeta电位随温度升高发生突变, 微凝胶表面几乎为中性, 其突变温度与临界絮凝温度(CFT)相当. CFT随离子强度增加向低温迁移, 微凝胶聚集速率在高温时比低温时快.     

Symmetric and asymmetric adsorption of pH-responsive gold nanoparticles onto microgel particles and dispersion characterisation

The interaction between carboxylic acid-stabilised gold nanoparticles (AuNP) and pH-responsive microgels is shown. The microgel particles are a copolymer of N-[3-(dimethylamino)propyl]methacrylamide (DMAPMA) and N-isopropylacrylamide (NIPAM). The microgel properties are presented by their hydrodynamic diameter and electrophoretic mobility in response to pH. These microgel particles are pH-responsive under neutral conditions decreasing in diameter beyond pH 7. The dispersion characteristics of AuNP adsorbed onto the microgel network are shown with respect to adsorbed amount and the pH-responsive properties of the AuNP. This data is presented between pH 3 and 6 where the microgel properties remain constant. Asymmetric adsorption of AuNP onto poly(DMAPMA-co-NIPAM) microgels is achieved by adsorption of nanoparticles, from the aqueous phase, onto microgel-stabilised oil-in-water emulsions. These asymmetrically modified microgels display very different dispersion behaviour, in response to pH, due to their dipolar nature.     

Swelling and deswelling of adsorbed microgel monolayers triggered by changes in temperature, pH, and electrolyte concentration

The formation and characterization of close-packed monolayers of negative, poly(N-isopropylacrylamide)-based microgel particles onto positively charged silicon wafers is described. The silicon wafers were rendered positive by first oxidizing their surface to silica and then adsorbing a layer of poly(ethyleneimine). The thickness of the deposited microgel monolayers (under aqueous conditions) has been determined by spectroscopic ellipsometry as a function of temperature (20-60 degrees C), pH (3-8), and added NaCl concentration (0-1 M). No actual desorption of the microgel particles was evident on changing the conditions, but a swelling/deswelling transition was observed around 32 degrees C. The thickness of the monolayer has been compared with the hydrodynamic diameter of the free microgel particles, dispersed in aqueous solution. For the poly(N-isopropylacrylamide) microgel particles, without any bulk ionisable comonomer groups present, the temperature dependence of the ellipsometric thickness of the monolayer mirrors closely that of the hydrodynamic diameter of the free particles. When ionizable (-COOH) groups are introduced into the microgel particles, however, this correspondence is largely lost because the microgel particles forming the deposited monolayer now contract strongly onto the oppositely charged substrate surface.     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Effect of chain length on the interaction between modified organic salts containing hydrocarbon chains and poly(N-isopropylacrylamide-co-acrylic acid) microgel particles

A series of four hydrophobically modified, diphenylazo-based organic salts have been prepared and characterized. To achieve this a C(x) (x = 4, 6, 8, or 10) hydrocarbon chain was inserted between the diphenylazo moiety and the quaternary ammonium headgroup of the salt. The absorption of each of the four modified organic salts into anionic microgel particles of poly(N-isopropylacrylamide-co-acrylic acid) has been studied at pH 8. In addition, the hydrodynamic diameters and electrophoretic mobilities of the microgel particles have been studied as a function of the organic salt concentration, also at pH 8. In addition to the electrostatic attraction between the quaternary ammonium head groups of the organic salts and the anionic groups within the microgel particles, hydrophobic association between the chains of the organic salts within the microgel particles plays a role, with this effect increasing strongly from x=4 to 10. Desorption of the x=4 and 6 organic salts occurs readily on changing, in situ, the pH from 8 to 2.5 (and thereby eliminating the electrostatic interaction) but is only partially achieved for the x=8 and 10 organic salts. Indeed, for the x=10 organic salt, only about 80% of the organic salt is desorbed upon dilution of the microgel particles into a large excess of water.     

Preparation and characterization of pH‐responsive and thermoresponsive hybrid microgel particles with gold nanorods

We report on pH‐responsive and thermoresponsive hybrid materials based on the assembly of gold nanorods, Au NRs, into multiresponsive, crosslinked copolymer microgel particles. These microgel particles were prepared by the surfactant‐free emulsion polymerization of N‐isopropylacrylamide and acrylic acid using N, N′‐methylene bis‐acrylamide as a crosslinker, which produces particles measuring approximately 160 nm that are interconnected to one other. Cetyltrimethyl ammonium bromide‐stabilized Au NRs were also prepared independently using a seed‐mediated growth method and then loaded into swollen, deprotonated, acrylic acid‐containing microgel particles using the electrostatic interactions between the oppositely charged particles. Transmission electron micrographs of the as‐prepared hybrid Au NR–microgel particles confirmed that the Au NRs were attached to the surface of the microgel particles. The size‐dependent temperature‐responsive characteristics of the hybrid microgel particles were studied by dynamic light scattering, and it was found that as the temperature increased across the phase transition temperature, the particle size decreased to 56% of the original volume. The thermoresponsive and pH‐responsive optical properties of the hybrid microgel particles were also systematically investigated. The thermo‐ and pH‐induced shrinkage of the microgel led to an increase in the UV–vis absorption intensity and caused a significant blue shift in the longitudinal surface plasmon bands of the Au NRs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Interfacial biocatalysis on charged and immobilized substrates: the roles of enzyme and substrate surface charge

An enzyme charge ladder was used to examine the role of electrostatic interactions involved in biocatalysis at the solid-liquid interface. The reactive substrate consisted of an immobilized bovine serum albumin (BSA) multilayer prepared using a layer-by-layer technique. The zeta potential of the BSA substrate and each enzyme variant was measured to determine the absolute charge in solution. Enzyme adsorption and the rate of substrate surface hydrolysis were monitored for the enzyme charge ladder series to provide information regarding the strength of the enzyme-substrate interaction and the rate of interfacial biocatalysis. First, each variant of the charge ladder was examined at pH 8 for various solution ionic strengths. We found that for positively charged variants the adsorption increased with the magnitude of the charge until the surface became saturated. For higher ionic strength solutions, a greater positive enzyme charge was required to induce adsorption. Interestingly, the maximum catalytic rate was not achieved at enzyme saturation but at an invariable intermediate level of adsorption for each ionic strength value. Furthermore, the maximum achievable reaction rate for the charge ladder was larger for higher ionic strength values. We propose that diffusion plays an important role in interfacial biocatalysis, and for strong enzyme-substrate interaction, the rate of diffusion is reduced, leading to a decrease in the overall reaction rate. We investigated the effect of substrate charge by varying the solution pH from 6.1 to 8.7 and by examining multiple ionic strength values for each pH. The same intermediate level of adsorption was found to maximize the overall reaction rate. However, the ionic strength response of the maximum achievable rate was clearly dependent on the pH of the experiment. We propose that this observation is not a direct effect of pH but is caused by the change in substrate surface charge induced by changing the pH. To prove this hypothesis, BSA substrates were chemically modified to reduce the magnitude of the negative charge at pH 8. Chemical modification was accomplished by the amidation of aspartic and glutamic acids to asparagine and glutamine. The ionic strength response of the chemically modified substrate was considerably different than that for the native BSA substrate at an identical pH, consistent with the trend based on substrate surface charge. Consequently, for substrates with a low net surface charge, the maximum achievable catalytic rate of the charge ladder was relatively independent of the solution ionic strength over the range examined; however, at high net substrate surface charge, the maximum rate showed a considerable ionic strength dependence.     

Equilibrium and kinetic aspects of the uptake of poly(ethylene oxide) by copolymer microgel particles of N-isopropylacrylamide and acrylic acid

The use of microgels for controlled uptake and release has been an area of active research for many years. In this work copolymer microgels of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc), containing different concentrations of AAc and also cross-linking monomer, have been prepared and characterized. These microgels are responsive to pH and temperature. As well as monitoring the equilibrium response to changes in these variables, the rates of swelling/de-swelling of the microgel particles, on changing either the pH or the temperature, have also been investigated. It is shown that the rate of de-swelling of the microgel particles containing AAc is much faster than the rate of swelling, on changing the pH appropriately. This is explained in terms of the relative mobilities of the H(+) and Na(+) ions, in and out of the particles. It was observed that the microgels containing AAc, at pH 8, de-swelled relatively slowly on heating to 50 degrees C from 20 degrees C. This is attributed to the resistance to collapse associated with the large increase in counterion concentration inside the microgel particles. The swelling and de-swelling properties of these copolymer microgels have also been investigated in aqueous poly(ethylene oxide) (PEO) solutions, of different MW (2000-300 000). The corresponding absorbed amounts of PEO from solution onto the microgels have also been determined using a depletion method. The results, as a function of AAc content, cross-linker concentration, PEO MW, pH, and temperature, have been rationalized in terms of the ease and depth of penetration of the PEO chains into the various microgel particles and also the H-bonding associations between PEO and either the -COOH of the AAc moeities and/or the H of the amide groups (much weaker). Finally, the adsorption and desorption of the PEO molecules in to and out of the microgel particles have been shown to be extremely slow compared to normal diffusion time scales for polymer adsorption onto rigid surfaces.     

温度、pH敏感性核壳结构微凝胶的制备及性质

以无皂乳液分步聚合的方法, 将N-异丙基丙烯酰胺(NIPAM)与N,N-亚甲基双丙烯酰胺(MBA)交联反应3 h, 制得种子乳液, 再向种子乳液中加入甲基丙烯酸(MAA)功能性单体继续反应2 h, 制备了具有温度、pH敏感性的核壳结构微凝胶. 通过透射电子显微镜(TEM)、红外光谱(IR)等表征了微凝胶外貌形态及结构组成, 动态光散射(DLS)测定了微凝胶粒径响应热、pH的变化及微凝胶Zeta电位的变化. 结果表明凝胶形貌为异型核壳结构; Zeta电位与微凝胶粒径随温度、pH变化相关.     

Preparation of monodisperse poly(N-isopropylacrylamide) microgel particles with homogenous cross-link density distribution

Monodisperse microgel latex with homogeneous cross-link density distribution within the particles was prepared by feeding the monomer and cross-linker into the reaction mixture in a regulated way during the polymerization. To determine the appropriate monomer feeding parameters, the kinetics of the particle formation was investigated by HPLC. The swelling and optical characteristics of the prepared homogenously cross-linked microgel particles were compared to the properties of inhomogenously cross-linked microgels prepared by the normal precipitation polymerization method. The distribution of the cross-link density within the particles inserts a great influence on the characteristics of the system. The degree of swelling of the homogeneous particles is significantly higher than that of the heterogeneous microgel particles. Furthermore, at room temperature the pNIPAm latex containing the homogeneously cross-linked particles is transparent, while the heterogeneously cross-linked particles form a highly turbid system at the same 0.1 wt% concentration.     

Photoresponsive surfactants in microgel dispersions

Microgel particles are cross-linked polymer particles. When dispersed in a good solvent for the polymer concerned, they are able to respond to a range of external stimuli by changing volume. Hence, microgel particles are suited to numerous applications (for example, controlled uptake and release) in the pharmaceutical, coatings, and water treatment industries. In this work, pH-sensitive, 0.5 wt % cross-linked poly(2-vinylpyridine) (PVP) microgel particles have been prepared and characterized. When the dispersion pH is decreased below 4.5, the pyridine groups become protonated and the microgel network becomes positively charged, causing the particles to expand. To investigate the possibility of using light as a trigger for effecting volume changes, the interaction of these microgel particles with a photodegradable anionic surfactant, 4-hexylphenylazosulfonate (C(6)PAS), has been investigated using dynamic light scattering and electrophoretic mobility measurements. The electrostatic attraction between the positively charged microgel network (at solution pH 3) and the negatively charged headgroups on the surfactant molecules caused a dramatic decrease in particle volume, and charge-reversal of the particles occurred with increasing surfactant concentration. The UV irradiation of phenylazosulfonate surfactants destroys the anionic headgroup of the molecules, and the microgel particles re-swell. The irradiation of PVP dispersions in the presence of C(6)PAS, along with mixed surfactant systems of sodium dodecyl sulfate plus C(6)PAS, has been investigated.     

以微凝胶模板合成P(AM-co-DMC)/SiO2杂化粒子

以聚(丙烯酰胺-co-甲基丙烯酰氧乙基三甲基氯化铵)[P(AM-co-DMC)]微凝胶为模板,TMOS为硅前驱体,中性水环境下合成了一系列P(AM-co-DMC)/SiO2有机-无机杂化粒子.对杂化粒子的大小、形态及表面形貌等进行研究,发现微凝胶对杂化粒子的形态和大小起主导作用,SiO2在模板上沉积,即使经过灼烧依然保持模板的形态;TMOS的用量对杂化粒子的性质也有重要影响——用量少时,得到的杂化粒子表面粗糙,增加用量会使表面变得光滑.杂化粒子经过灼烧后,表面会变得更加粗糙.     

Uptake and release of surfactants from polyampholyte microgel particles

Polyampholyte microgel particles, containing both methacrylic acid and 2-(dimethylamino) ethyl methacrylate (a weak base), in a mainly N-isopropyl acrylamide network, have been prepared by free-radical dispersion polymerisation. The swelling properties of the particles have been shown to be pH and temperature dependent and to exhibit a minimum in size at the iso-electric point. The uptake and release of cetylpyridinium chloride and Triton X-100, into and from, the polyampholyte microgel particles have been investigated as a function of pH. The absorbed amounts at different pH values have been related to various specific interactions between the surfactant and the microgel network.     

Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide

This article describes the adsorption of sodium dodecyl benzene sulfonate, an anionic surfactant, on a hematite surface and that when the surface is preadsorbed with polyacrylamide. The adsorption of surfactant on a hematite surface has been studied through equilibration and during kinetics measurements at three pH levels, viz. 4.0, 7.0, 8.9. The surfactant adsorbs strongly on the hematite surface. The adsorption density at equilibrium as well as the rate of adsorption are dependent on the suspension pH. The maximum adsorption density has been observed at pH 4, which reflects strong adsorption of negatively charged sulfonate ions on the oppositely charged Fe₂O₃ surface (point of zero charge, 6.4). The adsorption density reaches its equilibrium value sooner in the case of an alkaline suspension and later in the case of acidic pH. The polymer surfactant interaction has been noticed in the present study and is also a function of pH. The hematite mineral when preadsorbed with the polymer draws fewer of the surfactant molecules at lower surface coverage (during the initial period of the kinetics measurement) irrespective of the pH. When the adsorption of the surfactant reaches a value which is near the equilibrium one, the pH effect is evident. In the case of acidic pH, the surfactant adsorbs more on the hematite surface when preadsorbed with the polymer compared to the bare surface. In the case of neutral or alkaline pH, however, the density of surfactant adsorption remains lower throughout the kinetics measurement when the surface is preadsorbed with the flocculant compared to the bare surface. The particles also remain flocculated till the end of the experiment, whereas at pH 4 the particles are deflocculated. In addition to pH, the electrostatic nature of the adsorbent and the presence of anionic surfactant have an influence on the flocculation–deflocculation phenomena. The polymer–surfactant interaction has been schematically represented. The surfactant is bound with polymeric chains as a combination of its monomeric form as well as in the form of association in the case of acidic media and in competition with polymer in the case of alkaline media. Received: 18 April 2000/Accepted: 2 August 2000     

Mononuclear rearrangement of heterocycles in zwitterionic micelles of amine oxide surfactants

The pH-induced swelling of poly(2-vinylpyridine) microgel particles was studied using dynamic light scattering. The increase in particle diameter with decreasing pH was modeled using a well-established thermodynamic model for microgel swelling. The Maxwell construction was applied to extend the model and yield a prediction for a pH-responsive microgel across the entire pH range. The model predicts a first order phase transition for polymer-solvent combinations with a Flory interaction parameter, χ, greater than a critical value χ(c). The modified theory compared favorably to the dynamic light scattering data for the hydrodynamic diameter of microgel particles based on 2-vinylpyridine at different pH values. In particular, the swelling transition is both predicted theoretically and observed experimentally to occur at a pH lower than the pK(a) of the polymer.     

Interfacial layers of stimuli-responsive poly-(N-isopropylacrylamide-co-methacrylicacid) (PNIPAM-co-MAA) microgels characterized by interfacial rheology and compression isotherms

Stimuli-sensitive emulsions stabilized by microgel particles consisting of poly-(N-isopropylacrylamide-co-methacrylicacid) (PNIPAM-co-MAA) and being responsive to both pH and temperature have been investigated with respect to the visco-elastic properties of the interfacial layer. Properties of the interfacial layer were probed by means of shear and dilatational rheology as well as by compression isotherms and are related to the microgel packing at the interface as visualized by cryogenic scanning electron microscopy. The corresponding pH dependent emulsion stability is strongly correlated with the visco-elastic properties of the microgel covered oil-water interface. At high pH when the microgels are charged, a structure of partially interconnected microgels is found that provides elastic, soft gel-like interfaces. At low pH, however, the uncharged microgels are densely packed and the interface is rather brittle. Obviously, these pH dependent visco-elastic properties of the microgel layer at the oil-water interface play a determining role in the stability of emulsion droplets and allow us to prepare very stable emulsions when the microgels are charged and to break the emulsion by changing the pH.     

Stimulus-responsive particulate emulsifiers based on lightly cross-linked poly(4-vinylpyridine)-silica nanocomposite microgels

Lightly cross-linked poly(4-vinylpyridine)-silica nanocomposite microgel particles have been recently reported to act as pH-responsive particulate emulsifiers [Fujii, S.; Read, E. S.; Armes, S. P.; Binks, B. P. Adv. Mater. 2005, 17, 1014]. In this work, the synthesis and performance of such nanocomposite microgel particles are studied in more detail. Scanning electron microscopy, dynamic light scattering, nitrogen microanalyses, thermogravimetric analysis, aqueous electrophoresis, and acid-base titration were used to characterize the nanocomposites in terms of their particle size and morphology, polymer and silica contents, surface compositions, and critical swelling pH, respectively. Depending on the polarity of the oil phase and the purity of the nanocomposite particles, either oil-in-water or water-in-oil emulsions could be prepared at pH 8-9, but not at pH 2-3. These emulsions were characterized in terms of their emulsion type, mean droplet diameter, and morphology using electrical conductivity, light diffraction, and both electron and optical microscopy. In some cases, rapid demulsification could be induced by lowering the solution pH: addition of acid led to protonation of the 4-vinylpyridine residues, which imparted cationic microgel character to the nanocomposite particles. Cross-linking of the nanocomposite microgel particles is essential for their optimum performance as a pH-responsive emulsifier, but unfortunately it is not sufficient to allow recycling.     

Polyphosphate interaction with aluminium-doped titania pigment particles

The interaction of a widely used Calgon™ polyphosphate dispersing reagent with aluminium-doped titania pigment particles has been investigated using electrokinetic and rheological studies combined with adsorption isotherms. The influence of pH, aluminium dopant concentration and polyphosphate concentration is reported. Polyphosphate adsorption density and affinity with the titania pigment surface is highest under acidic solution conditions. This however, does not necessarily transfer to enhanced dispersion properties at low pH values. At pH 9, the polyphosphate adsorption density correlates directly with a reduction in pigment particle interactions making polyphosphate an effective titania pigment dispersant under alkaline conditions. Conversely, at pH 4, polyphosphate adsorption densities less than 0.1 mg m⁻² have no effect on the colloidal stability of the titania particles and their Newtonian flow behaviour. At adsorption densities of 0.1 mg m⁻², approaching the iep (near 0.2 mg m⁻²), the suspension aggregates. It is not until the polyphosphate adsorption density is greater than 0.3 mg m⁻² that the titania pigment suspension begins to restabilise. It is proposed that chemisorption dominates polyphosphate adsorption at pH 9 whilst at pH 4 a combination of chemisorption and electrostatic adsorption occurs. Stabilisation by the polyphosphate present at the pigment surface depends on both electrostatic and steric effects. At high pH, both are effective but at low pH, electrostatic stabilisation is partly neutralised and higher adsorption densities are required for effective stabilisation.     

Deformation controlled assembly of binary microgel thin films

We describe the assembly of two-component, hydrogel microparticle (microgel) monolayer films onto solid substrates via passive Coulombic adsorption from solution. By using two different microgel types with nearly identical sizes but different degrees of softness, the influence of particle deformation on film composition was determined. Determination of the microgel properties using a variety of light scattering techniques allowed for predictions of the film composition as a function of solution composition using a random sequential adsorption (RSA) model. The films were then studied via atomic force microscopy (AFM), and surface coverage and population statistics were determined from the images and compared to the model predictions. Deviations from the predicted particle adsorption behavior can be directly traced to differences in particle softness, deformation, and particle footprint following adsorption, which biases the particle coverage to the more rigid (smaller footprint) particles. Furthermore, by using a mixture of degradable and nondegradable core/shell particles, the identity of the particles can be unambiguously determined by measuring AFM height changes following erosion of the core from the microgels. These results show that, regardless of the solution diffusion properties of soft particles, their competition for surface adsorption from a binary mixture is largely dictated by their interactions with the surface and their deformation at the surface.     

Synthesis of cross‐linked homopolymers and copolymers of 1‐vinylimidazole in supercritical carbon dioxide for removal of Cr(VI) from aqueous solution

In this work, cross‐linked poly(1‐vinylimidazole) (PVIm) and poly(1‐vinylimidazole‐co‐acrylic acid) [poly(VIm‐co‐AA)] polyampholytes microgel were synthesized by precipitation polymerization in supercritical carbon dioxide at 14 and 20 MPa. The obtained products were characterized by Fourier transform infrared spectroscopy and Energy‐dispersive X‐ray spectroscopy. The results indicate that the functional monomers including 1‐VIm and AA were cross‐linked in polymers successfully. Aggregate particles with diameters of approximately 200 nm were observed by scanning electron microscopy and particle size distribution. Surface area analysis showed that the surface area of microgel prepared at a pressure of 14 MPa are 40.28 m²/g. The swelling behavior of polyampholytes microgel was studied. The cross‐linking degrees of PVIm and copolymers can reach 92.6% and 98.1%. The effect of pH values of solution, contact time, adsorbent dosage, initial Cr(VI) concentration on adsorption capacity were also investigated. The results revealed that cross‐linked polymer has a high adsorption capacity of 306.0 mg/g for Cr(VI) in 130 mg/l solution at pH 2 and cross‐linker ratio of 27.3%. Copyright © 2013 John Wiley & Sons, Ltd.