Highly selective fluorescent sensing of Pb by a new calix[4]arene derivative

A new chemosensor was synthesized by the alkylation of p-tert-butyl-calix[4]arene with three N,N-diethylacetamide groups and one methyl 3-ethoxy-naphthalene-2-carboxylate, which exhibited highly selective fluorescent response to Pb²⁺ over alkali, alkali earth metal ions and some transition metal ions in CH₃CN-H₂O.     

A new fluorogenic calix[4]arene N-dansylcarboxamide in the cone conformation for selective optical recognition of mercury(II)

A novel fluorogenic calix[4]arene dansylcarboxamide in the cone conformation has been synthesized as the disodium salt and employed in optical recognition of mercury(II). In extraction from aqueous solutions with high content of competing Na⁺ (C_Na+ ∼0.1 M; pH 5.0, acetate buffer) into CHCl₃, the fluoroionophore allowed for detection of 8.0 × 10⁻⁷ M Hg²⁺ (1:1 complex; ) with high selectivity over many other relevant metal ions.     

A C-linked peptidocalix[4]arene bearing four dansyl groups: a highly selective fluorescence chemosensor for fluoride ions

A new C-linked peptidocalix[4]arene functionalized with four l-alanine and dansyl units at the upper rim has been prepared, which exhibited highly selective recognition towards F⁻ along with weaker complexation to AcO⁻ and H₂PO₄⁻ and no complexation to Cl⁻, Br⁻, I⁻, and HSO₄⁻ by fluorescence spectroscopy and ¹H NMR method.     

Highly selective fluorescent chemosensor for Na~+ based on pyrene-modified calix[4]arene derivative

A novel calix[4]arene derivative with pyrene fluorophores at the upper rim and tetraester ionophores at the lower rim was synthesized in six steps,and its structure was proved by NMR and ESI-MS spectro-scopies. Furthermore,the chemosensing behavior of the host compound for alkali and alkaline earth metal ions was investigated by fluorescence spectroscopy. The obtained results show that the calix-arene host can selectively bind sodium ion with the complexation stability constant of 2190 mol-1.L. The complexa...     

A new fluorescent double-cavity calix[4]arene: synthesis and complexation studies toward nitroanilines

A novel bicyclic calix[4]arene (4) molecular receptor has been synthesized, and its sensory abilities toward noxious aromatic nitroamines evaluated in apolar media. Molecular host–guest interactions examined through fluorescence and ¹H NMR spectroscopies showed the formation of 1:1 type endo-inclusion complexes with all the nitroaniline guests. The potential of 4 as a chemical sensor is established.     

A phenanthrene-based calix[4]arene as a fluorescent sensor for Cu and F

A new phenanthrene-based fluorescent calix[4]arene (4) has been synthesized in cone conformation. This compound was examined for its fluorescent properties towards different metal ions (Na⁺, Li⁺, Mg²⁺, Ni²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Pb²⁺) and anions (F⁻, Cl⁻, Br⁻, H₂₄PO⁻,${{\text{H}}_2{\text{PO}}_4}^{-}\text{,}$₃NO⁻,${{\text{NO}}_3}^{-}\text{,}$₄HSO⁻,${{\text{HSO}}_4}^{-}\text{,}$ CH₃COO⁻) by fluorescence spectroscopy. The properties of the compound were evaluated and show that it is a fluorescence sensor for Cu²⁺ and F⁻. With the addition of Cu²⁺ and F⁻, the fluorescence was severely quenched.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Ratiometric chemosensing of Mg ions by a calix[4]arene diamide derivative

A new chemosensor with a phenanthroimidazole subunit based upon calix[4]arene-diamide has been synthesized, and its Mg²⁺-selective fluoroionophoric properties were investigated in an aqueous DMSO solution. The compound exhibited a pronounced Mg²⁺-selective fluoroionophoric behavior over other physiologically relevant metal ions. A significant red shift in fluorescence emission (Δλ = 86 nm) provided the ratiometric determination as well as naked-eye detection of Mg²⁺ ions.     

Synthesis of calix[4]arene alkylamine derivatives as new phase-transfer catalysts for esterification reaction

This study reports the synthesis of calix[4]arene-based phase-transfer catalysts derived from the reaction of 5,17-di-tert-butyl-25,27,26,28-tetrahydroxycalix[4]arene with N-ethylpiperazine, diallylamine or 4-benzylpiperidine. The catalytic efficiency of the calix[4]arenes alkylamine derivatives was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It has been observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using the N-ethylpiperazine amine derivative of calix[4]arene as a phase-transfer catalyst in dichloromethane at 25 °C, provided the best yields.     

Highly selective fluorescent chemosensor for Na<Superscript>+</Superscript> based on pyrene-modified calix[4]arene derivative

A novel calix[4]arene derivative with pyrene fluorophores at the upper rim and tetraester ionophores at the lower rim was synthesized in six steps, and its structure was proved by NMR and ESI-MS spectroscopies. Furthermore, the chemosensing behavior of the host compound for alkali and alkaline earth metal ions was investigated by fluorescence spectroscopy. The obtained results show that the calixarene host can selectively bind sodium ion with the complexation stability constant of 2190 mol⁻¹·L. The complexation with sodium ion can pronouncedly induce the excimer emission to decrease and the monomer emission to increase, whereas the addition of the other alkali and alkaline earth metal ions does not cause appreciable changes in the fluorescence spectrum of the host compound. The present calix[4]arene derivative displays potential application as fluorescent chemosensor for sodium ion. Supported by the National Natural Science Foundation of China (Grant Nos. 20421202, 20673061 & 20703025) and the 111 Project (Grant No. B06005)     

A fluorescent probe for fluoride ion based on 2-aminopyridyl-bridged calix[6]arene

An 2-aminopyridyl-bridged calix[6]arene on the upper rim fixed in cone conformation (3) was successfully synthesized and its highly selective recognition towards fluoride ion was proved by fluorescent and ¹H NMR titration experiments.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Sorption of heavy metal ions by silica gel-immobilized, proton-ionizable calix[4]arenes

Silica gel-immobilized, di-ionizable calix[4]arenes are employed as stationary phases in ion-exchange chromatography for selected heavy metal ions. Sorption efficiencies for Pb²⁺ are dependent on the structure of the calix[4]arene ligand and the linker that joins the ligand to the silica gel, as well as the acidity of the sample solution. Although the resins exhibit only poor sorption of Cd²⁺, they are found to be scavengers for Hg²⁺. Competitive sorption studies are conducted with selected resins.     

Transition metal ion selective ortho-ester diazophenylcalix[4]arene

New chromogenic dizophenylcalix[4]arene 1 showing selective color change to transition metal ions over other alkaline and alkaline earth metal ions has been prepared in the cone conformation and tested for its usefulness.     

Synthesis of a novel calix[4]arene-based fluorescent ionophore and its metal ions recognition properties

A novel fluorescent ionophore derived from calix[4]arene and pyrazoline was designed and synthesized. Its molecular structure was confirmed by 1H NMR and element analysis. The resulting material shows specific fluorescent behavior toward the Zn2+ ion among the other divalent metal ions, such as Co2+, Ni2+, Cu2+. The primary results indicate this ionophore material is a potential material for developing efficient fluorescent Zn2+ chemosensors.     

The selective preparation of partial cone O-aryl calix[4]arene ethers from 1,3-dimethoxycalix[4]arene: a new platform for the preparation of non-aggregated dyes

We report a new direct route for the selective preparation of novel partial cone O-aryl ether calix[4]arenes to be used as new platforms for the preparation of non-aggregated dyes. These partial cone conformers have the aromatic substituents lying within the calix[4]arene annulus via the upper rim.