Silicon determination in plant materials by instrumental epithermal neutron activation analysis

The Si determination with epithermal neutrons using the reaction²⁸Si (n,p)²⁸Al is described. Thermal neutrons are eliminated from the irradiation position with a BN-shield. Two first order interfering reactions with P and with Al necessitate appropriate corrections. The interfering reaction on Al is shown to depend heavily on the hydrogen (H) content of the sample, which therefore must be taken into account. The lower application range in plant samles is estimated to be 500 g g^–1. Reproducibility is <5% in suitable cases, but not as good if the necessary corrections are large. The capacity is 25 samples per 8 h. The method is applied to 3 plant standards (rice, hay and pine needles) and to 47 samples of spruce needles. The applicability to different plant materials is mainly limited by their relative Al, P and Si concentrations. Literature values are use to find plant categories in which Si can be reasonably determined by instrumental epithermal neutron activation analysis (IENA).     

Low-level determination of silicon in biological materials using radiochemical neutron activation analysis

Summary A new radiochemical neutron activation analysis (RNAA) method has been developed for low-level determination of Si in biological materials, which is based on the ³⁰Si(n,γ)³¹Si nuclear reaction with thermal neutrons. The radiochemical separation consists of an alkaline-oxidative decomposition followed by distillation of SiF₄. Nuclear interferences, namely that of the ³¹P(n,p)³¹Si with fast neutrons, have been examined and found negligible only when irradiation is carried out in an extremely well-thermalized neutron spectrum, such as available at the NIST reactor. The RNAA procedure yields excellent radiochemical purity of the separated fractions, which allows the measurement of the β^--activity of the ³¹Si by liquid scintillation counting. Results for several reference materials, namely Bowen’s Kale, Bovine Liver (NIST SRM 1577b), Non-Fat Milk Powder (NIST SRM 1549) and several intercomparison samples, Pork Liver-1, Pork Liver-2 and Cellulose Avicel, are presented and compared with literature values.     

Thallium determination in biological materials by radiochemical neutron activation analysis

Summary The determination of thallium in biological materials sometimes cause problems because of the low concentrations of this toxic element. In the present work a method is described which optimizes the parameters affecting the specificity and sensitivity of the radiochemical NAA of thallium in biological samples. High thermal neutron flux, complete decomposition of the organic matter by pressurized digestion, TlI precipitations, liquid extraction of HTlBr₄ and La(OH)₃ scavenging purification are the steps leading to the final homogeneous preparation of Tl₂CrO₄ for -activity measurement. The method was applied to various materials as bovine liver, bone and nails. Good agreement was found between certified and determined thallium concentrations of the reference material CRM 176. The chemical yield comes to about 80%, with low deviations. The sensitivity of the method is about 10^–3 g/g, the standard deviations being in the range of 3.6% (CRM 176), 14% (bovine liver), and 17% (bone). Detailed working instructions are given.     

Nitrogen determination in plant samples by fast neutron activation analysis

For the non-destructive deermination of the nitrogen content in plant samples 14-MeV neutron activation analysis was applied. Using powder samples of 0.7 g, irradiation time of 1 h and measuring time of 10 min, the accuracy of the determination is about +15%. The potassium content of the plant samples was determined by X-ray fluorescence analysis and correction was made for their contribution to the nitrogen activities.This work was supported in part by the Hungarian Academy of Sciences.     

The determination of silicon in steel by 14-mev neutron activation analysis

A fast (2–5 min) non-destructive determination of silicon in steel by 14-MeV neutron activation is described. The 1.78-MeV ²⁸Al activity, induced by the reaction ²⁸Si(n,p)²⁸Al, is counted on a NaI(Tl) detector. An oxygen flux monitor is used to normalise to the same neutron flux.Two methods are described to correct for the ⁵⁶Mn activity (2.58 h), induced into the iron matrix via ⁵⁶Fe(n,p)⁵⁶Mn. Nuclear interferences of phosphorus and aluminium have been examined. Special attention has been paid to stainless steels. A sensitivity of 0.02 to 0.05% of silicon is obtained. The precision is 2 to 3% for steels containing above 1% silicon, and 7% for 0.1% of silicon.     

Simultaneous determination of copper,manganese, zinc and sodium in plant materials by neutron activation analysis

Neutron activation analysis has been used for the simultaneous determination of Cu, Mn, Zn and Na in plant materials. The heterocyclic dye PAN has been applied as a chelating agent to achieve the group chemical separation of Mn, Cu, Ni and Zn. Various factors which affect the formation and extraction of the PAN-metal chelates have been studied and optimized, using suitable aqueous solutions to selectively strip these elements from the organic phase. This procedure has been applied to the determination of these elements in ‘Bowen’s Kale’ and U.S. NBS Citrus-leaves and Tomatoleaves samples.     

The determination of tin in explosive materials by thermal neutron activation analysis

A method, based on the measurement of the -photopeak at 332 keV arising from a¹²⁴Sn(n, )^125mSn reaction, has been developed for the rapid measurement of Sn at concentrations of 20 g g^–1, present as the cross-linking agent, in explosive charges. The method is comparative, and has a limit of detection of 0.6 g g^–1 and a precision of 5% RSD. The method requires no sample preparation and is economical in effort.     

Redox substoichiometric determination of arsenic in biological materials by neutron activation analysis

A redox substoichiometry is proposed for an accurate and precise determination of arsenic. This method is based on the substoichiometric oxidation of trivalent arsenic to pentavalent with potassium bromate or ceric sulfate followed by the separation of these species by thionalide extraction of trivalent arsenic. It was applied to neutron activation analysis of arsenic in the NBS SRM Orchard Leaves and the Shark Powder. The results were obtained with an excellent accuracy and precision.     

Possibilities of low-level determination of silicon in biological materials by activation analysis

The capabilities of neutron and photon activation analysis (NAA and PAA, respectively) for low-level determination of silicon in biological materials have been examined. Sensitivities of a variety of modes of NAA and PAA with radiochemical separation have been evaluated. Results are presented for silicon in reference materials CSRM 12–2-03 Lucerne, Bowen’s Kale, NIST SRM-1571 Orchard Leaves, and NIST SRM-1515 Apple Leaves. The results were obtained by employing the ²⁹Si(n,p)²⁹Al reaction with fast reactor neutrons and the radiochemical procedure developed for aluminium separation. Possibilities of further improvement of the silicon determination limit down to the μg g^–1 level by employing NAA and PAA with radiochemical separation are outlined.     

Possibilities of low-level determination of silicon in biological materials by activation analysis

The capabilities of neutron and photon activation analysis (NAA and PAA, respectively) for low-level determination of silicon in biological materials have been examined. Sensitivities of a variety of modes of NAA and PAA with radiochemical separation have been evaluated. Results are presented for silicon in reference materials CSRM 12-2-03 Lucerne, Bowen's Kale, NIST SRM-1571 Orchard Leaves, and NIST SRM-1515 Apple Leaves. The results were obtained by employing the 29Si(n,p)29Al reaction with fast reactor neutrons and the radiochemical procedure developed for aluminium separation. Possibilities of further improvement of the silicon determination limit down to the microg g(-1) level by employing NAA and PAA with radiochemical separation are outlined.     

Low level determination of manganese in biological reference materials by neutron activation analysis

A simple method was developed for the low level determination of manganese in biological materials by neutron activation analysis with radiochemical separation based on manganese dioxide precipitation. Precision and accuracy of the method were tested by analyses of IAEA reference materials Animal Muscle H-4, Milk Powder A-11, Freeze Dried Animal Blood A-13, Horse Kidney H-8, and Mixed Human Diet H-9. Interferences from iron and cobalt were also evaluated.     

The determination of oxygen and silicon in diamond by 14 MeV neutron activation analysis

Techniques for the measurement of low levels of oxygen and silicon, using fast neutron activation analysis, have been developed and applied to high-quality diamonds. For oxygen, a limit of detection of approximately 5 μg has been established. Sources of error have been studied and eliminated, the ubiquitous occurrence of oxygen being the major problem. Within the accuracy of this work, the results obtained show no significant differences in the oxygen contents of diamonds of different types, or of diamonds from different sources. An oxygen content of 35±4 ppm has been established for high-quality colourless diamonds. For silicon, a limit of detection of 25 μg was established and the average silicon content of these diamonds was found to be less than 3 ppm. It is concluded that the oxygen in high-purity diamonds is present as CO₂ or H₂O and not in silicate inclusions.     

Simultaneous determination of chromium and silicon in steel by 14-mev neutron activation analysis

Chromium and silicon are determined simultaneously in steel by 14-MeV neutron activation analysis. The activities of ⁵²V(E_γ=1.43 MeV,T_{$\text{1}\text{2}$}=3.76 min) from ⁵²Cr(n,p)⁵²V and ²⁸Al (E_γ=1.78 MeV; T_{$\text{1}\text{2}$}=2.24 min) from ²⁸Si(n,p)²⁸Al are evaluated by mixed γ-ray spectrometry. The influence of manganese and phosphorus, the main interfering elements, is negligible for most stainless steels. The count rate should be limited, to avoid ⁵²V pulse pile-up effects interfering in the ²⁸Al energy region. Precisions in the 2-10% range are reached, depending on the concentrations, for a 10-min analysis time. Results for a series of steel samples are compared with industrial analyses.     

Vanadium determination in rat tissues and biological reference materials by neutron activation analysis

Vanadium was determined in adrenal gland, brain, ileum, kidney, liver, lung, muscle, myocard, skin, spleen, gonads, thyroid, and tibia of rats fed with normal diet and exposed to high vanadium doses in drinking water. Both radiochemical neutron activation analysis (RNAA) and instrumental neutron activation analysis (INAA) were employed. The RNAA procedure consisted in dry ashing samples prior to irradiation and vanadium separation from the irradiated samples by extraction with N-benzoyl-N-phenylhydroxylamine (BPHA) in toluene from 5 mol·l^–1 HCl. Vanadium accumulation as a function of a type of the tissue, exposure time, sex of rats, and administration of V(IV) or V(V) was studied. For quality assurance purposes, the biological (standard) reference materials NBS SRM 1571 Orchard Leaves, NBS SRM 1577a Bovine Liver, IAEA H-4 Animal muscle, and Bowen's Kale were analyzed.Presented at the 2nd Balkan Conference on Activation Analysis and Nuclear-Related Analytical Techniques, Bled, 4–6 October, 1989.     

Simultaneous determination of mercury and selenium in biological materials by radiochemical neutron activation analysis

A simple and sensitive radiochemical neutron activation analysis (RNAA) method has been developed for the simultaneous determination of mercury and selenium in biological materials. The radiochemical procedure is based upon the digestion of irradiated samples with sulphuric and nitric acids followed by subsequent extractions of mercury and selenium into toluene, first of mercury from 7.5 M H₂SO₄-0.01M HBr media and after of selenium from 7M H₂SO₄-1 M HBr media. After washing of the organic phases with similar media, the mercury bromide was back-extracted into 0.034M EDTA in 5% aqueous ammonia and the selenium bromide into 0.14M H₂O₂ in aqueous solution. The¹⁹⁷Hg and the⁷⁵Se were counted on a Ge(Li) detector. The precision and accuracy of the method was checked by analysing NBS Standard Reference Materials: orchard leaves and bovine liver.     

Indirect determination of soluble trace elements in certified reference materials by neutron activation analysis

Since 1983 we have analyzedaqua regia extracts from environmental reference materials of 5 different soils and 4 different sludges by neutron activation analysis. Aqua regia as such is not accepted for irradiation in a nuclear reactor, and therefore the solution has to be evaporated to dryness, mixed and dried to constant weight before an aliquot can be taken and subjected to instrumental neutron activation analysis (INAA). Results for leachable Cr and Zn were found to display greater variability than results for total contents of these elements, and the reasons for this will be discussed.For the 1994 certification campaign for one soil and two sludges we have chosen to determine the total content of trace elements in these reference materials by INAA before and afteraqua regia leaching. The leachable contents are then found indirectly as a difference between the two results; in this way we eliminate the sources of uncertainty associated with the drying and handling of theaqua regia extracts, and we reduce the contributions from counting statistics.     

Simultaneous determination of silicon and phosphorus in cast iron by 14 MeV neutron activation analysis

A fast (10 min), non-destructive simultaneous determination of silicon and phosphorus in cast iron and steel by 14 MeV neutron activation was developed. The 1.78 MeV²⁸Al activity (T=2.24 min) induced by the reaction²⁸Si(n, p)²⁸Al is counted on a NaI(Tl) detector. Two measurements are made to correct for the 1.81 MeV⁵⁶Mn activity (T=2.58 hr) from the iron matrix. However,²⁸Al is also produced via³¹P(n, α)²⁸Al. By (n, 2n) reaction, phosphorus yields also³⁰P (T=2.6 min), the 0.511 MeV annihilation radiation of which is counted by two opposite NaI(Tl) detectors in coincidence. Again, two successive coincidence measurements are carried out in order to take into account the⁵³Fe activity (β⁺; T=8.9 min) from⁵⁴Fe(n, 2n)⁵³Fe. The²⁸Al measurement is appropriately corrected via the computed phosphorus content. An oxygen flux monitor was used to normalize to the same flux. Nuclear interferences have been examined. Special attention has been paid to the presence of copper. The standard deviation for phosphorus being as high as ca. 0.09% P for a single determination, this technique can only be practical as an independent phosphorus analysis for high phosphorus cast irons. The precision on the²⁸Al measurement is 5% relative for 0.2% Si and 2.5% above 1% Si. Aspirant of the N.F.W.O.     

Trace determination of iron on a silicon wafer surface by silicon direct bonding and neutron activation analysis

In order to determine iron on silicon wafer surface at a level of 10¹⁴ atoms·m^–2 the efficiency of a well-type Ge detector for⁵⁹Fe -ray emissions was measured and a low temperature silicon direct bonding technique was developed. With silicon direct bonding at a temperature of 350 to 650°C iron remains near the interface of the bound silicon. The iron contamination of the interface escaped from the interface can be ignored with this technique. The value of iron obtained was (2.7 to 5.9)·10¹⁴ atoms · m^–2 in the surface on silicon wafers.     

The precise and accurate determination of silicon in rocks by 14-MeV neutron activation analysis

The errors associated with the measurement of silicon in silicate rocks by fast neutron activation analysis have been investigated. The accuracy has been determined by comparing the values obtained with the accepted values for 22 silicate rock standards. Precisions of 0.25 % and accuracies of about 0.45 % are possible.