Controlling the geometry (Janus balance) of amphiphilic colloidal particles

A simple, generalizable method is described to produce Janus colloidal particles in large quantity with control over their respective hydrophobic and hydrophilic areas (Janus balance) in large quantity. To this end, charged particles adsorb onto the liquid-liquid interface of emulsions of molten wax and water in the presence of surfactants of opposite charge, whose concentration modifies how deeply particles penetrate the oil-water interface, and subsequent surface chemical modification of the resulting colloidosomes is performed after lowering temperature to solidify the wax. Silica particles modified in this way using different amounts of didodecyldimethylammonium bromide (DDAB) display contact angles that vary controllably between 37 degrees and 75 degrees. Janus balance also varies but over a more limited range with control of pH, salt concentration, or the presence of nonionic surfactant (Tween 20 or ethanol). Purity, Janus balance, and colloidosome structure are evaluated by a combination of fluorescence microscopy, flow cytometry, and scanning electron microscopy (SEM). The three-phase contact angle is obtained by observing SEM images of voids left by particles escaped from the surface. Colloidosomes made in the presence of DDAB are markedly improved with respect to the hexagonal close packing, which helps increase the efficiency of the method. Gram-sized quantities of particles are synthesized.     

Self-assembly of model amphiphilic Janus particles

We apply molecular dynamics simulations to investigate the structure formation of amphiphilic Janus particles in the bulk phase. The Janus particles are modeled as (soft) spheres composed of a hydrophilic and hydrophobic part. Their orientation is described by a vector representing an internal degree of freedom. Investigating energy fluctuations and cluster size distributions, we determine the aggregation line in a temperature-density-diagram, where the reduced temperature is an inverse measure for the anisotropic coupling. Below this aggregation line clusters of various sizes depending on density and reduced temperature are found. For low densities in the range ρ? ≤ 0.3, the cluster size distribution has a broad maximum, indicating simultaneous existence of various cluster sizes between 5 and 10. We find no hint of a condensation transition of these clustered systems. In the case of higher densities (ρ? = 0.5 and 0.6), the cluster size distribution shows an extremely narrow peak at clusters of size 13. In these icosahedrons, the particles are arranged in a closed-packed manner, thereby maximizing the number of bonds. Analyzing the translational mean-square displacement we also observe indications of hindered diffusion due to aggregation.     

Janus and multiblock colloidal particles

We review recent developments in the synthesis and self-assembly of Janus and multiblock colloidal particles, highlighting new opportunities for colloid science and technology that are enabled by encoding orientational order between particles as they self-assemble. Emphasizing the concepts of molecular colloids and colloid valence unique to such colloids, we describe their rational self-assembly into colloidal clusters, taking monodisperse tetrahedra as an example. We also introduce a simple method to lock clusters into permanent shapes. Extending this to 2D lattices, we also review recent progress in assembling new open colloidal networks including the kagome lattice. In each application, areas of opportunity are emphasized.     

Solvent-free synthesis of Janus colloidal particles

Taking advantage of the quick and efficient access of vapor to surfaces, a simple, solvent-free method is demonstrated to synthesize Janus colloidal particles in large quantity and with high efficiency. First, at the liquid-liquid interface of emulsified molten wax and water, untreated silica particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically by exposure to silane vapor and, in principle, subsequent dissolution of the wax opens up the inner particle surface for further chemical modification. Applying this scheme, this paper describes the production of amphiphilic Janus particles (hydrophobic on one side, hydrophilic on the other) and dipolar Janus particles (positively charged on one side, negatively charged on the other). Janus geometry is confirmed by fluorescence microscopy and flow cytometry. Amphiphilic Janus particles are found to adsorb strongly to the water-oil interface, whereas dipolar particles assemble into chains in the aqueous phase.     

Simple method to produce Janus colloidal particles in large quantity

A simple, generalizable, inexpensive method is demonstrated to synthesize Janus colloidal particles in large quantity. At the liquid-liquid interface of emulsified molten wax and water, untreated particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically. Finally, wax is dissolved, and the inner surfaces are modified chemically. Gram-sized quantities or more of Janus particles can be synthesized by taking this approach.     

Ordering of amphiphilic Janus particles at planar walls: a density functional study

We investigate the structure formation of amphiphilic molecules at planar walls using density functional theory. The molecules are modeled as (hard) spheres composed of a hydrophilic and hydrophobic part. The orientation of the resulting Janus particles is described as a vector representing an internal degree of freedom. Our density functional approach involves fundamental measure theory combined with a mean-field approximation for the anisotropic interaction. Considering neutral, hydrophilic, and hydrophobic walls, we study the adsorption of the particles, focusing on the competition between the surface field and the interaction-induced ordering phenomena. Finally, we consider systems confined between two planar walls. It is shown that the anisotropic Janus interaction yields pronounced frustration effects at low temperatures.     

Aggregation of amphiphilic polymers in the presence of adhesive small colloidal particles

The interaction of amphiphilic polymers with small colloids, capable to reversibly stick onto the chains, is studied. Adhesive small colloids in solution are able to dynamically bind two polymer segments. This association leads to topological changes in the polymer network configurations, such as looping and cross-linking, although the reversible adhesion permits the colloid to slide along the chain backbone. Previous analyses only consider static topologies in the chain network. We show that the sliding degree of freedom ensures the dominance of small loops, over other structures, giving rise to a new perspective in the analysis of the problem. The results are applied to the analysis of the equilibrium between colloidal particles and star polymers, as well as to block copolymer micelles. The results are relevant for the reversible adsorption of silica particles onto hydrophilic polymers, used in the process of formation of mesoporous materials of the type SBA or MCM, cross-linked cyclodextrin molecules threading on the polymers and forming the structures known as polyrotaxanes. Adhesion of colloids on the corona of the latter induce micellization and growth of larger micelles as the number of colloids increase, in agreement with experimental data.     

Interactions between colloidal particles in amphiphilic mixtures: a density functional theory study

We present a density functional theory study of interactions between spherical colloidal particles in amphiphile solutions. Theory is found to be in good agreement with previously published molecular dynamics simulations. It is used to analyze the effect of the amphiphile solution bulk density, the chain length, and the solvent mole fraction on the potential of mean force between the particles. The general features of the potential of mean force are rationalized in terms of formation of layers and bilayers of amphiphilic molecules in the intercolloidal gap. Theory yields the same general trends as observed in simulations and in experiments. In particular, the computed mean force changes its character from repulsive to attractive and back to repulsive as the solvent mole fraction is gradually increased.     

Clusters of amphiphilic colloidal spheres

Orientation-dependent interactions can drive unusual self-assembly of colloidal particles. This study, based on combined epifluorescence microscopy and Monte Carlo simulations, shows that amphiphilic colloidal spheres, hydrophobic on one hemisphere and charged on the other, assemble in water into extended structures not formed by spheres of uniform surface chemical makeup. Small, compact clusters each comprised of less than 10 of these Janus spheres link up, as increasing salt concentration enhances electrostatic screening, into wormlike strings.     

Disk micelles from amphiphilic Janus gold nanoparticles

Janus gold nanoparticles are synthesised via a simple preparation method and behave as amphiphiles self-assembling in water into disk-shaped micelles.     

Janus particles at liquid-liquid interfaces

Following recent theoretical predictions, we report on the first experiments on the interfacial activity of so-called Janus nanoparticles (i.e., bifacial particles consisting of a gold and an iron oxide moiety). Using pendant drop tensiometry, we show that the amphiphilicity derived from the Janus character of the particles leads to a significantly higher interfacial activity compared to that of the respective homogeneous particles of the same size. The self-assembly of Janus particles at the hexane-water interface results in a significant decrease in the interfacial tension. Furthermore, we demonstrate control over the interfacial activity by tuning the particles' amphiphilicity via ligand-exchange reactions.     

Analysis of colloidal particles V. size-exclusion chromatography of colloidal semiconductor particles

An HPLC technique for the size determination of colloidal cadmium sulphide and zinc sulphide in a diameter range from 20 down to 2 nm using silica with pore sizes from 30 to 100 nm is described. The growth of the particles during the run was suppressed by the addition of stabilizers to the eluent and by the use of reversed-phase silica as the stationary phase for inorganic stabilizers. The calibration of the column sets by electron microscopy resulted in a linear relationship between the logarithm of the particle diameter and the elution time. The analysis was carried out within 4–10 min. The lateral resolution lay between 1.3% for larger particles and 1.9% for smaller particles. Below a diameter of 13 nm these values were better than those found from electron microscopy. From the comparison of the calibration lines for various colloidal materials, the differences in their electrical double layers could be estimated. The limitations of the method are discussed and the size-exclusion chromatographic and electron microscopic methods are compared.     

Photoinduced deformation of amphiphilic azo polymer colloidal spheres

Photoinduced shape deformation of colloidal spheres made of an amphiphilic azo polymer has been demonstrated in this work. The polymer contains the donor-and-acceptor-type azobenzene chromophores and can form uniform colloidal spheres by dropwise adding water into its THF solution. When the colloidal spheres obtained were exposed to the interfering p-polarized Ar+ laser beams (150 mW/cm2), the colloidal spheres changed to prolates (i.e., "rugby-balls"), "spindles", and finally "rods", depending on the irradiation times. The elongated direction of the spheres was observed to be the same as the polarization direction of the laser beam. The average major-to-minor ratio of the ellipsoids could be easily adjusted by controlling the irradiation time. The deformation effect observed in this work can offer a new way to prepare nonspherical colloids from colloidal spheres and will shed new light on the correlation between the photodriven shape deformation and photoinduced surface relief gratings for the same type of polymers.     

Adsorption of Janus particles to curved interfaces

We investigate the adsorption of a spherical Janus particle to a spherically curved liquid-liquid interface. We show that the equilibrium contact angle is determined by the geometry of the particle, its wettability, and also the interfacial curvature. In contrast with a homogeneous particle, there is a preferred interfacial curvature (spontaneous curvature) due to the Janus particle when the particle satisfies certain conditions.     

Nonlinear electrophoresis of colloidal particles

Advances over the past decade in nonlinear electrophoresis of charged, dielectric colloidal particles in aqueous electrolytes are reviewed. Here, the word nonlinear refers to the fact that the ratio of the electrophoretic speed of the particle to the magnitude of the applied electric field—the electrophoretic mobility—is not independent of field strength. This is in stark contrast to the vast majority of work on (linear) colloidal electrophoresis over the last century, where the mobility is assumed to be a material property dependent only on the particle–electrolyte combination. The present discussion is focused on: (i) experimental measurements of the field-dependent mobility; (ii) an asymptotic scheme to calculate the mobility in the common thin-Debye-layer limit; and (iii) computations of nonlinear electrophoresis from numerical solution of the electrokinetic equations. The article concludes with suggestions for future work in this evolving area of colloid science.     

Preparation of monodispersed colloidal particles

The procedures and the backgrounds for the formation of monodispersed colloidal particles are reviewed, along with the personal view of the author's own, by classifying a wide variety of the systems. This article consists of the size distribution control for uniform colloidal systems with typical examples, including homogeneous and heterogeneous systems, and the crystal habit control of monodispersed particles.     

Interactions between spheroidal colloidal particles

Using Derjaguin's approximation, we have evaluated the interaction energy associated with van der Waals, electrostatic, depletion, and capillary forces between colloidal spheroids. If the interaction range between spheroids is distinctly smaller than the lengths of their principal axes, then simple pair potentials that depend on particle distance and orientation can be derived. Attractive interactions between adjacent spheroids favor their parallel alignment. Parallel spheroids can be arranged into a variety of densely packed configurations. All of these configurations turn out to have the same lattice energy. We discuss the implications of this degeneracy with respect to the stability of photonic crystals consisting of spheroids.