Crystallization of nordstrandite in ethylene glycol / water solutions: electron microscopic studies

The present work shows the growth of nordstrandite microcrystals observed by transmission and scanning electron microscopy. Nordstrandite was synthesised from non-crystalline aluminium hydroxide reacted in 20% ethylene glycol/water solution, at room temperature. This material was characterized by TEM, SEM, SAED, XRD and EDS/TEM, during six month and revealed the formation and growth of nordstrandite. Fibrillar pseudoboehmite is the only aluminium hydroxide which could be identified during the first two weeks. The nuclei grow, from complete dissolution/recrystallization of pseudoboehmite fibrils, into platy rectangular microscrystals of nordstrandite. Some tabular microcrystals recrystallise, forming after six months only the multi-point nordstrandite stars. This electron-optical study suggest that the star shape results from the overlapping of rectangular plates, and pseudoboehmite fibrils act as the precursor of nordstrandite crystallisation in ethylene glycol/water solution.      

über die Alterung gemeinsam gef?llter AlFe(III)-Hydroxide

The ageing products formed in distilled water at pH 6,3 from hydroxide gels precipitated at pH 7 and 10 by addition of NaOH to solutions of Fe(NO₃)₃ and Al_0,03Fe_0,97(NO₃)₃ were studied.The ageing products were identified by X-ray and IR-spectroscopy. Ageing both at room temperature and by boiling for four hours were studied and shown to be strongly influenced by the pH at which the hydroxides are precipitated, even when immediately washed free of accompanying ions, resulting from different transformations taking place in the originally amorphous hydroxides.     

Thermal and liquid crystalline properties of cellulose β-ketoesters prepared by homogeneous reaction with ketene dimers

Cellulose β-ketoesters having long alkyl or alkenyl chains were prepared by homogeneous reactions with alkyl or alkenyl ketene dimmers (OKD or AKD), and were characterized by X-ray diffractometory, differential scanning calorimetry, optical microscopy with cross polarizers and others. The Cellulose/OKD and AKD β-ketoesters with degrees of substitution (DS) of more than 1.5 were gummy solid at room temperature and had birefringence due to liquid crystalline structures in wide temperature range. The liquid crystalline/isotropic phase transition points were 150–175 °C, depending on the DS and substituents introduced into cellulose hydroxyls. X-ray diffraction patterns indicated that cellulose backbones had disordered structures at room temperature, while alkyl chains in the substituents formed ordered or crystalline domains in the cellulose β-ketoesters. Films of the cellulose/AKD β-ketoesters prepared by casting their chloroform solutions on glass plates had highly hydrophobic nature, and contact angles of water droplet on the films were more than 90°. The water-contact angles on the films decreased to some extent just after heating of the films at 105 °C, whereas they were gradually recovered to the initial values by conditioning at ambient temperature.     

Thermoreversible gelation of solutions of vinyl polymers

The thermoreversible gelation of solutions of isotactic poly(methyl methacrylate) is investigated. Amorphous gels can be prepared in l-butanol by a combination of a liquid-liquid demixing with an upper critical demixing temperature and a glass transition. Annealing of the demixed solutions above their glass transition temperature T_G, results in the formation of a crystalline gel. In oxylene, crystalline gels are formed by a liquid-liquid demixing with an lower critical demixing temperature and an annealing at room temperature. Very fast gelation is observed to occur far below room temperature in solvents like 2-butanone.     

Über die Alterung gemeinsam gefällter AlFe(III)-Hydroxide

The ageing products formed in distilled water at pH 6,3 from hydroxide gels precipitated at pH 7 and 10 by addition of NaOH to solutions of Fe(NO₃)₃ and Al_0,03Fe_0,97(NO₃)₃ were studied.The ageing products were identified by X-ray and IR-spectroscopy. Ageing both at room temperature and by boiling for four hours were studied and shown to be strongly influenced by the pH at which the hydroxides are precipitated, even when immediately washed free of accompanying ions, resulting from different transformations taking place in the originally amorphous hydroxides.

---

---

Mit 4 Abbildungen     

Rheological and DSC changes in poly(vinyl alcohol) gels induced by immersion in water

Poly(vinyl alcohol) (PVA) gels were prepared by freezing and thawing aqueous solutions at temperatures from ?20 to 15°C. The temperature was varied periodically by use of a computer. The endothermic DSC peak was observed for the PVA gels at about 60°C for five specimens of different degrees of saponification (DS). Another endothermic peak was also observed in the range 67–80°C, and this peak shifted to higher temperature with increasing DS. These endothermic peaks shifted to lower temperature on immersion of the PVA gels in water. The dynamic Young's modulus E′ at room temperature was also decreased by immersion of PVA gels in water; E′ decreased monotonically with increasing temperature for PVA gels without immersion in water, while it increased up to a certain temperature and then decreased with increasing temperature for PVA gels in water. The X-ray diffraction showed a characteristic crystalline pattern for PVA gels of higher DS, and this peak was intensified by stretching the gel.     

NMR characterization of the formation kinetics and structure of di-O-benzylidene sorbitol gels self-assembled in organic solvents

The molecule 1,3:2,4-di-O-benzylidene sorbitol (DBS) is a common "gelator" that forms thermally reversible gels in diverse organic solvents. Solid-state (13)C and (1)H NMR techniques, along with electron microscopy, are utilized in an exploratory study of DBS in the gelled state where we consider both in situ and dried gels. The gels were formed in either acetone or benzene, with the former being a better solvent for DBS. We find the in situ or dried DBS gels to be composed of rigid twisted nanofibrils (～15 to 21 nm in diameter). The fibrils show local molecular ordering, but not crystalline order, and they contain no trapped solvent. The molecular mobility at the fibril surface is modestly enhanced, and all the free hydroxyl groups of the sorbitol moiety are involved in strong hydrogen bonding. We also attempted to find a truly crystalline form of DBS whose structure, as judged by the similarity of (13)C spectra, is close to that of the fibrils. We partially succeeded in this quest, employing melt crystallization followed by slow cooling. However, this sample was a mixed crystal having small domains, where only one type of domain was structurally similar to the fibrils. We also investigated the long-time evolution of the in situ DBS gel network. Specifically, high-resolution NMR kinetic studies were performed over periods of days where the residual concentration of DBS in acetone solution was monitored during and after gel formation. The DBS concentration on these long timescales evolved slowly, and we introduce a simple mathematical model and equation to describe this phenomenon.     

Amyloid-mediated synthesis of giant, fluorescent, gold single crystals and their hybrid sandwiched composites driven by liquid crystalline interactions

We report for the first time on the templating effect of β-lactoglobulin amyloid-like fibrils to synthesize gold single crystals of several decades of μm in dimensions. The gold single crystals were produced by reducing an aqueous solution of chloroauric acid by β-lactoglobulin amyloid protein fibrils. Atomic force microscopy, conventional and scanning transmission electron microscopy, electron diffraction and optical microscopy techniques were combined to characterize the structure of the gold crystals. The single-crystalline features of these macroscopic gold crystals are witnessed by their distinctive hexagonal and triangular shape and are confirmed by selected area electron diffraction (SAED). UV-vis absorption spectrum, recorded after a reaction time of 6h at the heating temperature of 55°C showed a surface plasmon resonance peak at 540 nm. With the increase of reaction time to 24h, the absorption spectrum peaks shift to a very broad and higher wavelength region extending up to near infrared region. Remarkably, these single crystalline gold crystals show auto fluorescence when illuminated to UV lamp. Further increase in β-lactoglobulin amyloid fibrils concentration above the isotropic-nematic transition, drives the formation of gold single crystals microplates stacking together and self-assembling into new hierarchical, layered protein-gold hybrid composites.     

Polymeric Multiporous Materials from Fibrillar Networks

Summary: Poly(vinylidene fluoride) (PVF₂) forms thermoreversible gels with liquid alkyl diesters as well as with camphor which is solid at room temperature. The diesters are replaced by another low boiling solvent cyclohexane by solvent exchange technique while camphor is dried just by exposing the material in vacuum to yield highly porous materials. Nano pores are generated as a result of solvent removal from polymer-solvent intercalates whereas macropores are contributed by percolation of polymer fibrils. The porosity thus created covers a wide range from 3 nm to 400 µm producing multiporous materials. Pores greater than 6 nm are measured by mercury intrusion porosimetry (MIP) and pores of diameter less than 6 nm is observed by N₂ adsorption porosimetry. The dried samples show two melting regions, low temperature hump for porous portion and high temperature peak for bulk portion. The porous materials have the ability to absorb water-soluble herbicides from around 10-ppm aqueous solution as indicated in UV spectrophotometric experiment.     

Synthesis of manganese oxide electrodes with interconnected nanowire structure as an anode material for rechargeable lithium ion batteries

Manganese oxide electrodes composed of interconnected nanowires are electrochemically synthesized in manganous acetate solution at room temperature without any template and catalyst. Annealing temperature affects the electrode morphology, crystallization, and electrochemical performance. Scanning electron microscope (SEM) results show that nanowires are uniformly distributed and sizes are about 12-18 nm in diameter; the diameter decreases to about 8-12 nm after annealing at 300 degrees C. X-ray diffraction (XRD) and transmission electron microscope (TEM) images indicate that nanowires have poor crystalline characteristics. The higher the annealing temperature, the higher the crystalline degree is in manganese oxide. The synthesized anode material shows a much larger capacity than the traditional graphite materials for lithium storage. After annealing at 300 degrees C, the electrode's reversible capacity reaches 800 mAhg(-1), and the specific capacity retention remains nearly constant after 100 cycles.     

Gelation of perfluorinated liquids by N-alkyl perfluoroalkanamides

Gels comprised of low-molecular-mass organic gelators (LMOGs), N-alkyl perfluoroalkanamides [F(CF2)(m)CONH(CH2)(n)H; FmNHn], and several perfluorinated liquids are described. The gelation ability of the amides has been compared to that of two analogous alkyl perfluoroalkanoates. The properties of these gels have been correlated with the N-alkyl and (to a lesser extent) perfluoroalkyl chain lengths in the FmNHn by X-ray diffraction, polarizing optical microscopy, infrared spectroscopy, and small-angle neutron scattering. The gels are thermally reversible and require generally very low concentrations (<2 wt %) of LMOG. Several of the gels have been stable at room temperature for >1 year, thus far. The incompatibility of the fluorocarbon and hydrocarbon segments causes the LMOGs to aggregate into lamellae within the fibrils that constitute the basic unit of the gel networks. IR spectroscopic studies of these gels indicate that additional ordering within the aggregate units is enforced by intermolecular H-bonding among amide groups.     

Influence of aluminium precursor on physico-chemical properties of aluminium hydroxides and oxides

The process of hydrolysis of aqueous aluminium sulfate was carried on in ammonia medium at 100°C and for different time intervals (0, 20, 39 or 59 h). The products thus obtained were calcined at 550, 900 or 1200°C for 2 h with the aim to obtain aluminium oxides. The materials were studied with the following methods: thermal analysis, IR spectroscopy, X-ray diffraction, low-temperature nitrogen adsorption, adsorption–desorption of benzene vapours and scanning electron microscopy. Freshly precipitated material was an amorphous basic aluminium sulfate which after prolonged refluxing at elevated temperature in a mother liquor underwent a phase transformation into highly crystalline NH₄Al₁₃(SO₄)₂(OH)₆ containing tridecameric unit Al₁₃. It was accompanied by a decrease of specific surface area and the formation of a porous structure less accessible for benzene molecules. Regardless of the duration of the hydrolysis process, all products were characterised with poorly developed porous structure and hydrophilic character. Their calcination at the temperature up to 1200°C resulted in the formation of α-Al₂O₃ via transition forms of γ/η- and δ-Al₂O₃. The samples of aluminium oxides obtained after calcination at 550 and 900°C had higher values of specific surface area than starting materials due to processes of dehydroxylation and desulfurization. The process of calcination up to 900°C was reflected in developing of not only porous structure but also hydrophobic character of prepared materials. The S _BET values calculated for the oxide samples obtained from aged products of hydrolysis at 1200°C were lower than for the analogous sample prepared without the ageing step. It was concluded that prolonged refluxing at elevated temperature of the products of hydrolysis of aluminium sulfate decreased thermal stability of final aluminium oxides.     

Electron microscope investigations on the morphology of aluminium hydroxides

Summary The results are given of an investigation by means of the electron microscope and electron diffraction of the morphology of amorphous aluminium hydroxide and boehmite. The ageing process of amorphous aluminium hydroxide prepared from aluminium nitrate, ammonium alum and amalgamated aluminium was studied.

---

Zusammenfassung Untersuchungen im Elektronenmikroskop und mit Elektronenbeugung über die Morphologie vom amorphen Aluminiumhydroxyd und B?hmit werden beschrieben. Die Alterung von amorphem Aluminiumhydroxyd, hergestellt aus Aluminiumnitrat, Ammoniumalaun und amalgamiertem Aluminium wurde untersucht.

     

预先负载原料法的制备过程对复合分子筛形成的影响

采用预先负载原料法合成了具有核/壳结构的复合分子筛, 并研究了铝源类型和制备过程对反应的影响. 结果表明, 以异丙醇铝为铝源时, 晶化时间较短, 产物中没有SAPO-5晶体, 延长晶化时间可以提高SAPO-5的结晶度. 将负载磷的ZSM-5分别与不同组成的凝胶混合, 经室温陈化后可以明显加快晶化速度. 制备过程中凝胶的水含量和搅拌方式也根据铝源类型的不同有所差别. 当以拟薄水铝石为原料时, 在相同的处理条件下, 产物的结晶度都较高.     

Die Bildung von kristallinem Böhmit in gemeinsam gefällten AlFe(III)-Hydroxiden unter hydrothermalen Bedingungen

Under mild hydrothermal conditions originally amorphous aluminium hydroxide coprecipitated with iron(III)ions as Al_0,5Fe_0,5(OH)₃ transforms into aluminium hydroxide crystalline phases which are not observed in products of ageing of pure aluminium hydroxide.By X-ray diffraction analysis, IR spectroscopic studies and microscopic observations it has been found that due to the presence of iron(III) hydroxide it is possible to stabilize the trihydoxide of aluminium i.e. bayerite until 130–140°C. Moreover, with increasing temperature well crystallized boehmite is obtained instead of the usually formed pseudoboehmite.Experiments revealed that the formation of crystalline boehmite does not take place as a process of pseudoboehmit crystallites growth but only as a result of bayeriteboehmite transformation.

     

Synthesis of aluminium borate-boron oxide and binary titanium-boron and zirconium-boron oxides from metal alkoxides and (MeO)3B3O3 in non-aqueous solvents

The reaction of metal alkoxides M(OR)4 (M = Ti, Zr; R = organyl) with (MeO)3B3O3 (1 : 0.67) in dry propan-2-one at room temperature led to gels which when dried and calcined in air for 24 h at 500-1000 degrees C afforded bi-phased mixed-oxide materials formulated as 4TiO2 x 3B2O3 and ZrO2 x B2O3 in high ceramic yields and purity; the B2O3 phases of these materials were amorphous. The materials remained amorphous upon calcination at lower temperatures. The TiO2 phase of the 4TiO2 x 3B2O3 was crystalline when calcined at higher temperatures with either anatase (600 degrees C) or rutile (>800 degrees C) being obtained. The ZrO2 phase of the ZrO2 x B2O3 was crystalline when calcined at higher temperatures and was obtained as a metastable tetragonal phase (<700 degrees C) or baddeleylite (>800 degrees C). In a similar reaction, Al(O(i)Pr)3 (2 : 1) gave a bi-phased aluminium borate-boron oxide (Al18B4O(33).7B2O3) after calcination at >700 degrees C. The dried gels and oxide materials were all characterized by elemental analysis, TGA-DSC, and powder XRD.     

Influence of aluminium precursor on physico-chemical properties of aluminium hydroxides and oxides

The paper concerns aluminium hydroxides precipitated during hydrolysis of aluminium acetate in ammonia medium, as well as aluminium oxides obtained through their calcination at 550, 900 or 1200°C for 2 h. The following techniques were used for analysing of obtained materials: thermal analysis, IR spectroscopy, X-ray diffraction, low-temperature nitrogen adsorption, adsorption-desorption of benzene vapours and scanning electron microscopy. Freshly precipitated boehmite/pseudoboehmite had high value of S _BET, very good sorption capacity for benzene vapours, developed mesoporous structure and hydrophilic character. After prolonged refluxing at elevated temperature its crystallinity increased which was accompanied by a decrease of specific surface determined from nitrogen adsorption, decrease of sorption capacity for benzene vapours and weakening of the hydrophilic character. Calcination of all hydroxides at the temperature up to 1200°C resulted in the formation of α-Al₂O₃ via transition forms of γ-, δ-and θ-Al₂O₃. The samples of aluminium oxides obtained after calcination at 550 and 900°C were characterised with high values of specific surface area and displayed quite high heat resistance, probably due to a specific morphology of starting hydroxides. The process of ageing at elevated temperature developed thermal stability of aluminium oxides.     

Gelation of a Model Globular Protein

Hen egg white lysozyme (HEWL) was exposed to various physical and chemical denaturing environments to encourage protein denaturation and consequent gelation. Its phase behavior was examined as a function of pH, temperature and also in the presence of the reductant dithiothreitol (DTT). Transparent viscoelastic gels form at low pH values while opaque gels form under alkaline conditions. No increase in viscosity was observed for systems in pure water unless 20 mM of DTT was added, which is known to break the disulfide bridges present in HEWL. The microstructure of the gel was studied using transmission electron microscopy (TEM) and environmental scanning electron microscopy (ESEM). Gels formed at low pH contain fibrils ∼10 nm in diameter with various lengths while at high pH the gels are dominated by particulate aggregates. Thinner fibrils that are 4–6 nm in diameter are observed in the gels formed in the presence of DTT. In this case the distinct feature of the gels is they are thermoreversible and can be melted and reformed easily by varying the temperature.     

Role of MnO on the Mullitization Behavior of Al2 O3-SiO2 Gels

Gels were synthesized from solutions of tetraethylorthosilicate (TEOS) and aluminium nitrate (with and without manganese nitrate).The structural evolution of the gels as a function of manganese content and heat-treatment temperature was studied by visible spectrophotometry (VIS), electron paramagnetic resonance (EPR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that the presence of manganese can induce mullitization at lower temperatures. However, the effect of manganese depends on its content and how it enters into the mullite structure.     

Die durch die Anwesenheit von Eisen(III)-ionen bedingten Phasengleichgewichte kristalliner Aluminiumhydroxide des Nordstrandits,Hydrargillits und Bayerits

The investigation of ageing processes of coprecipitated aluminium and iron hydroxides—Al_0,5Fe_0,5(OH)₃, initially amorphous, reveals the major influence of Fe³⁺-ions on the transformation steps among the aluminium hydroxides.By combined X-ray and IR examination it has been found that the ageing of amorphous aluminium hydroxide in the presence of iron ions leads to the surprising coexistence of all known, well defined crystalline trihydroxide species of aluminium, namely nordstrandite, gibbsite and bayerite. Iron ions for their part transform from amorphous stage of hydroxide at the beginning into hydrohematite.The change in temperature orpH conditions of the milieu, or the change of both the parameters results in only one or two modifications from those aluminium hydroxides mentioned above.