Structural characterization of vulcanized natural rubber by latex state 13C NMR spectroscopy

Structural characterization of vulcanized natural rubber was performed by high‐resolution latex‐state ¹³C NMR spectroscopy. The vulcanized natural rubber latex was prepared by vulcanization of high ammonia natural rubber latex with sulfur and sodium di‐n‐butyldithiocarbamate as vulcanizing agents. High resolution was attained for latex‐state ¹³C NMR spectroscopy even after vulcanization of the rubber latex, as is evident from no background in spectrum and narrow half width of signals, which were independent of vulcanization time. Small signals at 44 and 58 ppm in the carbon region were assigned by measurements of both distortionless enhancement by polarization transfer (DEPT) and attached proton test (APT) to secondary, tertiary, and quaternary carbons of crosslinking points. The assignment was proved by high‐resolution solution‐state NMR spectroscopy of vulcanized liquid cis‐1,4‐polyisoprene as a model, in which DEPT, APT, 2‐dimensional ¹H‐¹³C correlation (HETCOR), and 2‐dimensional heteronuclear multiple bond correlation (HMBC) measurements were applied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1003–1009, 2007     

Photoreactive particle prepared from natural rubber and 1,9‐nonandioldimethacrylate

Photoreactive particle was prepared by graft copolymerization of 1,9‐nonandioldimethacrylate (NDMA) onto deproteinized natural rubber (DPNR) particles in latex stage. First, NDMA was mixed with α‐cyclodextrin (α‐CD) as a coupling agent to form an inclusion complex to stabilize a carbon–carbon double bond of NDMA as a bifunctional monomer. Second, the inclusion complex was graft‐copolymerized onto natural rubber (NR) in latex stage with potassium persulfate (KPS) as an initiator, after deproteinization with urea in the presence of surfactant. A terminal vinyl group of NDMA was used for the graft copolymerization, while the other remained in the resulting polymer, due to the coupling effect of the α‐CD. The products, after washing α‐CD out, were characterized by FTIR, X‐ray diffraction (XRD), ¹H NMR and solid‐state ¹³C NMR measurements. The amount of residual carbon–carbon double bond after graft copolymerization was investigated in relation to the amount of rubber and reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4111–4118, 2009     

Relaxation behavior of methacrylic polymers with bulky hydrophilic groups in their structures

The isochrones showing the temperature dependence of the loss relaxation modulus of poly(neopentyl glycol methacrylate) present an ostensible subglass absorption called β relaxation that roughly has the same intensity as the glass–rubber relaxation, or α process. The dielectric relaxation spectrum of this polymer also exhibits a well-developed β process followed at higher temperatures by the glass–rubber, or α relaxation, which strong conductive effects only permit to be detected at high frequencies. A detailed study of the conductive contributions to the dielectric loss above T_g was carried out using a theory that assumes that the dispersion observed in tan δ in the frequency domain arises from the Maxwell–Wagner–Sillars effect combined with Nernst–Planck electrodynamic effects caused by interfacial polarizations in the interface polymer electrodes. Attempts were made to evaluate the equivalent salt concentration that would produce the conductive effects experimentally observed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3027–3037, 1999     

Structure and properties of rubber/organic montmorillonite nanocomposites prepared by in situ anionic intercalation polymerization

Polybutadiene (PB), polyisoprene (PI), and styrene–butadiene rubber/organic montmorillonite (OMMT) nanocomposites (NCs) were prepared by in situ anionic intercalation polymerization. The intercalation structure, chemical constitution, and morphology of the rubber/OMMT NCs were characterized with X‐ray diffraction, H NMR spectroscopy, and transmission electron microscopy; the thermal and dynamic mechanical properties of the rubber/OMMT NCs were characterized with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The mechanical properties of PB/OMMT NC were also tested. The results showed that a certain extent of exfoliated rubber/OMMT could be prepared by anionic in situ intercalation polymerization. The incorporation of OMMT obviously changed the microstructure content of PB and PI: the concentrations of the 1,2‐unit, 3,4‐unit, and trans‐1,4‐unit increased dramatically with an increasing concentration of OMMT, and the concentration of the cis‐1,4 structure decreased. The addition of OMMT‐DK1B and OMMT‐DK4 had little effect on the molecular weight and molecular weight distribution, but the addition of OMMT‐DK1 reduced the molecular weight of rubber, and the molecular weight distribution became broad. The glass‐transition temperature, weight‐loss temperature, storage modulus, and loss modulus of the NCs evidently increased, but tan δ decreased. OMMT apparently enhanced the rubber matrix; for example, the breaking strength and hardness of PB/OMMT NC crosslinked rubber increased greatly, but the tear strength and permanent deformation did not change much. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1344–1353, 2005     

Transport of benzene and methyl‐substituted benzenes through carbon black‐filled epoxidized natural rubber

Sorption and diffusion of benzene and methyl‐substituted benzenes were investigated through epoxidized natural rubber (ENR) reinforced with four types of carbon black: superabrasion furnace (SAF), intermediate superabrasion furnace (ISAF), high‐abrasion furnace (HAF), and semireinforcing furnace (SRF). Kraus equation has been used to investigate the extent of reinforcement for the different types of carbon black used in the experiments. Effect of the type and concentration of the carbon black on solvent uptake and mechanism of diffusion were studied in detail. The rate constant for diffusion of the solvents in epoxidized natural rubber vulcanizate based on different carbon black type, and loading was investigated. Diffusion constant was found to decrease with increase in the degree of reinforcement. The interaction constant values were experimentally determined. The sorption data were used to determine the activation energy for the diffusion process and the enthalpy and entropy of the sorption process. The experimental results were compared with theoretical predictions. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 415–427, 1999     

Vibration damping materials based on interpenetrating polymer networks of carboxylated nitrile rubber and poly(methyl methacrylate)

Interpenetrating polymer networks (IPNs) based on carboxylated nitrile rubber (XNBR) and poly(methyl methacrylate)s were synthesized. Crosslinked XNBR was swollen in methyl methacrylate containing benzoyl peroxide as initiator and tetraethylene glycol dimethacrylate as crosslinking agent. The compositions of the IPNs were varied by changing the swelling time of the rubber in the methacrylate monomer. The dynamic mechanical properties of the IPNs were studied. The dynamic mechanical properties in the range 1–10⁵ Hz were obtained by the time‐temperature superposition of the data under multifrequency mode, which indicated high tan δ with good storage modulus in the entire frequency range. This indicates the suitability of these IPNs as vibration and acoustic dampers. Copyright © 2002 John Wiley & Sons, Ltd.     

Ambient curable latex films and adhesives based on natural rubber bearing Acetoacetoxy functionality

The study described in this paper first demonstrates that a newly modified form of natural rubber, namely graft copolymers of natural rubber with poly (acetoacetoxyethyl methacrylate), NR‐g‐PAAEM, is able to undergo a cross‐linking reaction at room temperature by reaction with a water dispersible polyisocyanate based on hexamethylene diisocyanate (poly‐HDI). Attenuated total reflectance Fourier transform infrared (ATR‐FTIR) analysis indicated that amide groups were formed by the reaction of the acetoacetyl groups (AcAc) present in the grafted poly (acetoacetoxyethyl methacrylate) (PAAEM) chains with the poly‐HDI. This observation was accompanied by a noticeable increase in the tensile strength of the NR‐g‐PAAEM latex films when adding poly‐HDI to the latex prior to film formation. DMTA analyses also revealed a shift in the tan δ peaks, corresponding to the transitions of both NR‐g‐PAAEM and free PAAEM phases, to higher temperatures. These results provide firm evidence of cross‐linking between NR‐g‐PAAEM chains by reaction with poly‐HDI during film formation under ambient conditions. Adhesives for bonding wood to wood based on the NR‐g‐PAAEM latex were then prepared, using poly‐HDI as the cross‐linker. The lap shear strength of the resulting adhesives exhibited a maximum value of 2657 KPa when a poly‐HDI:AAEM molar ratio of 3:1 was employed. It was also observed that the adhesive attained about approximately 89% of the highest lap shear strength after it was allowed to set at 30°C for 24 hours. Hence, the use of poly‐HDI in cross‐linking NR particles bearing grafted PAAEM offers great potential for developing latex adhesives and coatings capable of curing under ambient conditions.     

Comparative study of the mechanical relaxation behavior of polymethacrylates containing different bulky side groups

The syntheses of poly(1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate), and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) are reported. The mechanical relaxation spectrum of the simplest polymer, poly(1,3‐dioxan‐5‐yl methacrylate), exhibits a prominent β relaxation centered at ?98 °C, at 1 Hz, followed in increasing order of temperature by an ostensible glass–rubber relaxation process. In addition to the β relaxation, the loss curves of poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) display in the glassy state a high activation energy relaxation, named the β* process, that seems to be a precursor of the glass–rubber relaxation of these polymers. The mechanical spectra of poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) exhibit a low activation energy process in the low‐temperature side of the spectra, which is absent in the other polymers. The molecular origin of the mechanical activity of these polymers in the glassy state is discussed in qualitative terms. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1154–1162, 2002     

采用ATRP合成天然橡胶接枝共聚物——Ⅲ.NR-g-PMMA的制备

N-溴代丁二酰亚胺与天然橡胶(NR)反应合成了大分子引发剂——溴代天然橡胶[NR-Br(1)].通过原子转移自由基聚合(ATRP),以CuBr/PMDTA为催化体系,1引发甲基丙烯酸甲酯(MMA)接枝共聚制得新型天然橡胶-g-聚甲基丙烯酸甲酯[NR-g-PMMA(2)],其结构经1H NMR和IR表征.初步聚合反应动力学研究结果表明,NBS与NR在高温下反应容易伴随双键加成和环化反应,于室温反应所得1具有较高的引发活性;接枝聚合符合一级动力学反应,即2的分子量随MMA单体转化率的提高而增加.     

Latex‐state NMR spectroscopy for quantitative analysis of epoxidized deproteinized natural rubber

Method of quantitative analysis through latex‐state ¹³C NMR spectroscopy was established for in situ determination of epoxy group content of epoxidized natural rubber in latex stage. The epoxidized natural rubber latex was prepared by epoxidation of deproteinized natural rubber with freshly prepared peracetic acid in latex stage. The resulting epoxidized deproteinized natural rubber (EDPNR) latex was characterized through latex‐state ¹³C NMR spectroscopy. Chemical shift values of signals of latex‐state ¹³C NMR spectrum for EDPNR were similar to those of solution‐state ¹³C NMR spectrum for EDPNR. Resolution of latex‐state ¹³C NMR spectrum was gradually improved as temperature for the nuclear magnetic resonance (NMR) measurement increased to 70°C. Signal‐to‐noise ratio of latex‐state ¹³C NMR measurement was similar to that of solution‐state ¹³C NMR measurement at temperature above 50°C. The epoxy group content determined through latex‐state NMR spectroscopy was proved to be the same as that determined through solution‐state NMR spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd.     

Charge transport properties for carbazolyl groups pendant poly(glutamate)

Carbazolyl groups pendant poly(glutamate) (PCLG) was prepared to analyze its charge‐transport properties by employing mobility measurements and thermally‐stimulated current (TSC) measurements. The mobility induced TSC (MITSC) model proposed by I.Chen was employed to evaluate the experimental TSC spectra with mobility results. Simulated MITSC spectra showed good agreement in its peak temperature with experimental TSC spectra for PCLG. This suggests that the carrier transport followed the trap‐limited mechanism estimated by the mobility results. Further, the peaks in experimental TSC spectra appeared over the same temperature range as that in thermally‐stimulated polarization current (TSPC) spectra. Since the TSPC spectra were found to be correlated with the dielectric tan δ spectra for PCLG, the peaks in TSPC spectra are attributed to the side‐chain relaxation for PCLG. Therefore, the similarity between TSPC and TSC spectra indicates that the charge‐transport mechanism for PCLG was considerably affected by side‐chain relaxation for PCLG, which would vary the energy state of trap sites and effectively reduces the energy for the release of the carriers trapped on the illuminated surface. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 61–69, 1999     

Silicone‐based impact modifiers for poly(vinyl chloride), engineering resins,and blends

Silicone‐based impact modifiers were prepared in a previous study. The modifiers were composed of silicone/acrylic rubber cores and grafted acrylic shells. They improved the toughness of poly(vinyl chloride) (PVC) and poly(methyl methacrylate). The silicone emulsion that was used to produce the silicone‐based impact modifiers was prepared via two routes: emulsion polymerization and bulk polymerization of octamethyltetracyclosiloxane. Many silicone‐based impact modifiers were produced that had different silicone/acrylic rubber characteristics. Through a toughness examination of modified PVC, the best composition of the silicone‐based impact modifiers was obtained, and the silicone content in the rubber composition was 25 wt %. The morphology of the silicone‐based impact modifiers, determined by transmission electron microscopy, was as follows: core and second shell polymers were mainly poly(butyl acrylate), and the first shell polymer was silicone. The silicone‐based impact modifiers were blended with engineering resins such as PVC, polycarbonate (PC), poly(butylene terephthalate) (PBT), and PC/PBT mixtures. The impact strength under standard conditions and after weathering test conditions for blends of the silicone‐based impact modifiers were investigated with respect to two commercially available acrylic and methyl methacrylate/butadiene/styrene impact modifiers. The results showed good weatherability and good toughness under low‐temperature conditions for the silicone‐based impact modifiers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1112–1119, 2004     

Characterization and degradation of poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks

Poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks (PMPS–PMMA IPNs) were prepared by in situ sequential condensation of poly(methylphenylsiloxane) with tetramethyl orthosilicate and polymerization of methyl methacrylate. PMPS–PMMA IPNs were characterized by infrared (IR), differential scanning calorimetry (DSC), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The mobility of PMPS segments in IPNs, investigated by proton spin–spin relaxation T₂ measurements, is seriously restricted. The PMPS networks have influence on the average activation energy E_a,av of MMA segments in thermal degradation at initial conversion. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1717–1724, 1999     

Electric,dielectric, and dynamic mechanical behavior of carbon black/styrene‐butadiene‐styrene composites

The conductivity of styrene‐butadiene‐styrene block copolymers containing different amounts of extraconductive carbon black (CB) was investigated as a function of the mold temperature. The composites exhibited reduced percolation thresholds (between 1.0 and 2.0 vol % CB). The dynamic mechanical analysis characterization revealed that the glass‐rubber‐transition temperatures of both segments were not affected by the CB addition, although the damping of the polybutadiene phase displayed a progressive drop with an increase in the CB concentration. The normalized curves of tan δ/tan δ_max (where tan δ represents the value of the loss tangent at any measurement temperature and tan δ_max represents the loss tangent peak value at the corresponding temperature T_max) versus T/T_max (where T is the temperature and T_max is the maximum temperature), corresponding to both polystyrene and polybutadiene phases as well as the activation energy related to the glass‐rubber‐transition process, did not present any significant change with the addition of CB. The dielectric analysis revealed the presence of two relaxation peaks in the composite containing 1.5 vol % CB, the magnitude of which was strongly influenced by the frequency, being attributed to interfacial Maxwell‐Wagner‐Sillars relaxations caused by the presence of different interfaces in the composite. The mechanical properties were not affected by the presence of CB at concentrations of up to 2.5 vol %. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2983–2997, 2003     

Thermoplastic elastomer based on epoxidized natural rubber/thermoplastic polyurethane blends: influence of blending technique

Epoxidized natural rubber (ENR) and thermoplastic polyurethane (TPU) blends were prepared by simple blend and dynamic vulcanization. The main objective was to prepare a low‐hardness TPU material with good damping and elastic and mechanical properties. It was found that the incorporation of ENR into the blend shows a reduction in Young's modulus, hardness (i.e. <70 Shore A), damping properties (i.e. tan δ < 0.3), and tension set (i.e. <20%) compared with the pure TPU. This indicates the formation of softer TPU materials with superior damping and elastomeric properties. However, incorporation of ENR sacrificed mechanical properties in terms of tensile strength and elongation at break, but these still remain in the range of applicability for industrial uses. It was also found that dynamic vulcanization caused enhancement of mechanical properties, relaxation, damping, rheological properties, and elasticity of the blends. Temperature scanning stress relaxation measurements revealed an improvement in stress relaxation properties and thermal resistance of the dynamically cured ENR/TPU blend. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic mechanical and thermal properties of physically compatibilized natural rubber/poly(methyl methacrylate) blends by the addition of natural rubber‐graft‐ poly(methyl methacrylate)

The dynamic mechanical and thermal properties of natural rubber/poly (methyl methacrylate) blends (NR/PMMA) with and without the addition of graft copolymer (NR‐g‐PMMA) have been investigated. Dynamic mechanical spectroscopy is used to examine the effect of compatibilizer loading on storage modulus (E′), loss modulus (E″) and loss tangent (tan δ) at different temperatures and at different frequencies. The morphology of the blends indicates that the size of the dispersed phase decreased by the addition of a few percent of the graft copolymer followed by a leveling off at higher concentrations. This is an indication of interfacial saturation. Attempts have been made to correlate morphology with dynamic mechanical properties. Various models have been used to fit the experimental viscoelastic results. Differential scanning calorimetry has been used to analyze the glass‐transition temperatures of the blends. The thermal stability of the blends has been analyzed by thermogravimetry. Compatibilized blends are found to be more thermally stable than uncompatibilized blends. Finally the miscibility and mechanical properties of the blends annealed above T_g are evaluated. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 525–536, 2000     

Copolymerization of elemental sulfur with cyclic(arylene disulfide) oligomers

Copolymerization reactions between cyclic(arylene disulfide) oligomers were studied. The cyclic disulfide oligomers derived from 4,4′-isopropylidene bisbenzenethiol gave soluble polysulfanes via copolymerization with S₈. The copolymerization reactions were studied both in solution and melt by GPC and NMR. Solution copolymerization reactions can only form polysulfanes with up to three to four sulfur linkages; however, melt copolymerization reactions gave polysulfanes with up to seven sulfur linkages (average). The melt copolymerization reactions between cyclic disulfide oligomers derived from 4,4′-thiobis(benzenethiol) and S₈ were studied using DSC, TGA, and DMTA. With increasing contents of sulfur in the polysulfanes, T_gs, 5% weight losses by TGA, and tan δ decreased. With seven sulfur linkages in the polymer, it is a rubber with a T_g of 12°C, a 5% weight loss by TGA of 249°C, and tan δ of 44°C, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2961–2968, 1997     

Relaxation behavior of acrylate and methacrylate polymers containing dioxacyclopentane rings in the side chains

The synthesis of poly[(2,2‐dimethyl‐1,3‐dioxolan‐4‐yl) methyl acrylate)] (PACGA) and poly[(2,2‐dimethyl‐1,3‐dioxolan‐4‐yl) methyl methacrylate] (PMCGA) is reported. Both polymers present dielectric and mechanical β subglass absorptions at −128 and −115 °C, respectively, at 1 Hz, followed by ostensible glass–rubber or α relaxations centered in the vicinity of 0 and 67 °C, respectively, at the same frequency. The values of the activation energy of both the mechanical and dielectric β absorptions lie in the vicinity of 10 kcal mol⁻¹. The critical interpretation of the relaxation behavior of PMCGA suggests that dipolar intramolecular correlations play a dominant role in the response of the polymer to an electric field. The subglass relaxations of PACGA and PMCGA are further compared with the relaxation behavior of poly(1,3‐dioxane acrylate), poly(1,3‐dioxane methacrylate), and other polymers in the glassy state. The strong conductive processes observed in PMCGA at low frequencies and high temperatures were studied under the assumption that that these processes arise from Maxwell–Wagner–Sillars effects occurring in the bulk combined with Nernst–Planckian electrodynamic effects caused by interfacial polarization in the films. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 286–299, 2001     

Epoxy resin/poly(ϵ‐caprolactone) blends cured with 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane. II. Studies by Fourier transform infrared and carbon‐13 cross‐polarization/magic‐angle spinning nuclear magnetic resonance spectroscopy

Crystalline thermosetting blends composed of 2,2′‐bis[4‐(4‐aminophenoxy)phenyl]propane‐crosslinked epoxy resin (ER) and poly(?‐caprolactone) (PCL) were investigated by means of Fourier transform infrared (FTIR) spectroscopy and high‐resolution solid‐state NMR spectroscopy. FTIR investigations indicated that there were specific intermolecular interactions between ER and PCL and that the intermolecular hydrogen‐bonding interactions were weaker than the self‐association in pure epoxy. The intermolecular hydrogen bonding was considered to be the driving force for the miscibility of the thermosetting blends. For the examination of the miscibility of the thermosetting blends at the molecular level, high‐resolution solid‐state ¹³C cross‐polarity/magic‐angle spinning (CP‐MAS) NMR spectroscopy was employed. The line width of ¹³C CP‐MAS spectra decreased with increasing PCL contents, and the chemical shift of the carbonyl carbon resonance of PCL shifted to a low field with an increasing epoxy content in the blends. The proton spin–lattice relaxation experiments in the laboratory frame showed that all the blends possessed identical, composition‐dependent relaxation times (i.e., the proton spin–lattice relaxation times in the laboratory frame), suggesting that the thermosetting blends were homogeneous on the scale of 20–30 nm in terms of the spin‐diffusion mechanism, and this was in a good agreement with the results of differential scanning calorimetry and dynamic mechanical analysis. For the examination of the miscibility of the blends at the molecular level, the behavior of the proton lattice relaxation in the rotating frame was investigated. The homogeneity of the thermosetting blends at the molecular level was quite dependent on the blend composition. The PCL‐lean ER/PCL blends (e.g., 70/30) displayed a single homogeneous amorphous phase, and the molecular chains were intimately mixed on the segmental scale. The PCL‐rich blends displayed biexponential decay in experiments concerning the proton spin–lattice relaxation times in the rotating frame, which was ascribed to amorphous and crystalline phases. In the amorphous region, the molecular chains of epoxy and PCL were intimately mixed at the molecular level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1099–1111, 2003     

Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes

Developing conductive networks in a polymer matrix with a low percolation threshold and excellent mechanical properties is desired for soft electronics applications. In this work, natural rubber (NR) functionalized with poly(methyl methacrylate) (PMMA) was prepared for strong interfacial interactions with multiwalled carbon nanotubes (MWCNT), resulting in excellent performance of the natural rubber nanocomposites. The MWCNT and methyl methacrylate functional groups gave good filler dispersion, conductivity and tensile properties. The filler network in the matrix was studied with microscopy and from its non-linear viscoelasticity. The Maier-Göritze approach revealed that MWCNT network formation was favored in the NR functionalized with PMMA, with reduced electrical and mechanical percolation thresholds. The obvious improvement in physical performance of MWCNT/methyl methacrylate functionalized natural rubber nanocomposites was caused by interfacial interactions and reduced filler agglomeration in the NR matrix. The modification of NR with poly(methyl methacrylate) and MWCNT filler was demonstrated as an effective pathway to enhance the mechanical and electrical properties of natural rubber nanocomposites.