Synthesis and electrical conductivity of some poly[4‐amino‐2,6‐pyrimidinodi‐thiocarbamate]–metal complexes

Poly[4‐amino‐2,6‐pyrimidinodithiocarbamate] was prepared from the reaction of 2‐mercapto‐4,6‐diaminopyrimidine with carbon disulfide, followed by condensation through the removal of H₂S gas. Five polymer–metal complexes of manganese, ferrous, ferric, zinc and mercury were then prepared. The polymer–metal complexes are investigated by elemental analyses, ultraviolet Fourier transform infrared and magnetic susceptibility. The DC electrical conductivity variation with the temperature in the region 298–498 K of the five polymer–metal complexes was determined. Doping with 5% ZnCl₂ increased the electrical conductivity of the polymer at all temperatures investigated. All the polymer–metal complexes showed an increase in conductivity with an increase in temperature, which is a typical semiconductor behavior. The proposed structure of the complexes is (MLX₂·mH₂O)_n. All the polymer–metal complexes are thermally stable, are insoluble in common organic solvents and have high melting points. Copyright © 1999 John Wiley & Sons, Ltd.     

Preparation of some chitosan heavy metal complexes and study of its properties

The chitosan was prepared and mixed with some metal salts (FeCl₃, Co(OAc)₂ and NiCl₂) by different concentrations to form chitosan-metal complexes. The metal ions which strongly complexed to the amino groups of chitosan like Fe showed a smooth surface product, amorphous phase, thermally more stable and high electrical conductivity than other complexes, while the Co ions which the weakly complexed with chitosan showed a rough surface product, crystalline phase, thermally less stable and low electrical conductivity. The chitosan-metal complexes have a higher electrical conductivity than chitosan pure at room temperature.     

Complexes of polyelectrolyte hydrogels with organic dyes: Effect of charge density on the complex stability and intragel dye aggregation

The swelling behavior of polyelectrolyte gels based on poly(diallyldimethylammonium chloride) (copolymers of diallyldimethylammonium chloride and acrylamide with the variable composition) and poly(methacrylic acid, sodium salt) in the presence of organic water soluble dyes (alizarin, naphthol blue black, rhodamine) was studied. The collapse of the polyelectrolyte gels in the presence of oppositely charged dyes together with the effective absorption of dyes was observed. The shrinking degree and the dye absorption by the gel depend on the charges of the polymer network and the dye, and also on the dye concentration. Stability of the gel–dye complexes in a salt solution of NaCl and Al₂(SO₄)₃ was studied. It was shown that the complex stability in the salt solution depends on the charge density of the polymer chains forming the gel. The increase of charge density of polymer generally leads to the enhancement of the complex stability. For the systems with the fraction of charged poly(diallyldimethylammonium chloride) monomer units above 0.5 the release of alizarin to the external solution of Al₂(SO₄)₃ reservoir is practically completely suppressed. The obtained results show that oppositely charged dyes are generally from stable complexes with polyelectrolyte gels. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1209–1217, 1999     

Synthesis,characterization, and electrical properties of a diazodiphenylene‐bridged Cu–phthalocyanine polymer

A diazodiphenylene‐bridged Cu–phthalocyanine polymer was synthesized from the diazonium salt of bensidine and the Cu(II) 1,8,15,22‐tetraaminophthalocyanine complex and characterized with Fourier transform infrared, ultraviolet–visible spectroscopy, and elemental analysis. The polymer was partially soluble in organic solvents such as dimethylformamide and tetrahydrofuran. The molecular weight of the soluble part of the polymer was investigated with ebullioscopy and viscosimetry methods in tetrahydrofuran. Both methods showed that the molecular weight of the polymer was much larger than that of the complex. The conductivity of the samples was measured with a four‐prop conductivity measuring device. Iodine and hydrogen chloride were doped to the polymer, and an increase of about 10⁴ S cm^?1 in the electrical conductivity was observed. The cyclic voltammogram of the diazodiphenylene‐bridged Cu–phthalocyanine polymer in contact with a LiClO₄ electrolyte exhibited two reductions and two reoxidations with high reversibility and electrochemical stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5692–5698, 2006     

Solid polymer electrolytes. IV. Preparation and characterization of novel crosslinked epoxy‐siloxane polymer complexes as polymer electrolytes

Two series of novel crosslinked siloxane‐based polymers and their complexes with lithium perchlorate (LiClO₄) were prepared and characterized by Fourier transform infrared spectroscopy, solid‐state NMR (¹³C, ²⁹Si, and ⁷Li nuclei), and differential scanning calorimetry. Their thermal stability and ionic conductivity of these complexes were also investigated by thermogravimetric and AC impedance measurements. In these polymer networks, poly(propylene oxide) chains with different molecular weights were introduced through self‐synthesized epoxy‐siloxane precursors cured with two curing agents. The glass‐transition temperature (T_g) of these copolymers is dependent on the length of the ether units. The dissolution of LiClO₄ considerably increases the T_g of the polyether segments. The dependence of the ionic conductivity was investigated as a function of temperature, LiClO₄ concentration, and the molecular weight of the polyether segments. The ion‐transport behavior was affected by the combination of the ionic mobility and number of carrier ions. The ⁷Li solid‐state NMR line shapes of these polymer complexes suggest a significant interaction between Li⁺ ions and the polymer matrix, and temperature‐ and LiClO₄ concentration‐dependent chemical shifts are correlated with ionic conductivity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1226–1235, 2002     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

The origin of DC electrical conduction and dielectric relaxation in pristine and doped poly(3‐hexylthiophene) films

We present here the evidence for the origin of dc electrical conduction and dielectric relaxation in pristine and doped poly(3‐hexylthiophene) (P3HT) films. P3HT has been synthesized and purified to obtain pristine P3HT polymer films. P3HT films are chemically doped to make conducting P3HT films with different conductivity level. Temperature (77–350 K) dependent dc conductivity (σ_dc) and dielectric constant (ε′(ω)) measurements on pristine and doped P3HT films have been conducted to evaluate dc and ac electrical conduction parameters. The relaxation frequency (f_R) and static dielectric constant (ε₀) have been estimated from dielectric constant measurements. A correlation between dc electrical conduction and dielectric relaxation data indicates that both dc and ac electrical conductions originate from the same hopping process in this system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1047–1053, 2010     

Resistive‐type humidity sensors based on PVP–Co and PVP–I2 complexes

Poly(vinylpyrrolidone) films containing cobalt chloride or iodine were investigated to obtain information on their possible use as a humidity sensor element. FTIR and UV‐VIS spectroscopies were used to characterize the PVP–I₂ and PVP–Co complexes. Infrared spectroscopy revealed a structural change of both shape and intensity of the carbonyl and lactam bands, indicating the formation of an ion‐coordination polymer. The J–E curves for pure PVP, PVP–I₂, and PVP–Co films obey ohm's law at low voltages, deviate from the linear response at higher voltages, and finally display breakdown behavior. An increase in current density of the PVP matrix with iodine or cobalt doping is attributed to the formation of charge transfer complexes. The observed hysteresis of the I–V characteristics implies that there was some standing voltage in the film, which could be attributed to a disorientation of polar side groups of PVP. The electrical conductivities of the polymeric complexes were very sensitive to environmental humidity. An explanation of the humidity‐sensing behavior of the PVP–I₂ and PVP–Co complexes is presented. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 459–469, 2001     

Vibrational spectroscopy analysis of ion conduction mechanism in dispersed phase polymer nanocomposites

A novel combination of dispersed phase polymer nanocomposite electrolyte based on PEO₈‐LiClO₄+ x wt % nano‐CeO₂ has been investigated. A model for ion transport mechanism has been proposed to account for substantial enhancement of its electrical conductivity by ～ 2 orders of magnitude at low volume fraction of the filler reinforcement in the polymer nanocomposite films. The strength of the proposed model is based on unambiguous evidences from FTIR, TEM, and conductivity analysis. The FTIR results provide clear role of nanofiller concentration on ion–ion interaction quantified in terms of the fraction of free anion and ion‐pairs present in the nanocomposite films and its excellent correlation with conductivity versus filler concentration. The presence of asymmetry in the ν₄(ClO₄^?) band observed at 625 cm^?1 is attributed to its resolved degeneracy suggesting the presence of both uncoordinated and cation‐coordinated ClO₄^? anion in the matrix due to ion–ion and ion–filler interactions assisted by Lewis acid–base interaction. The enhancement in conductivity at low concentration is possibly due to direct interaction of nano‐CeO₂ with both polymer host and anions resulting in the release of ionic charges. Drastic conductivity reduction at higher concentration is related to charge immobilization because of ion/ion‐pair entrapment by local clusters of filler as evidenced in TEM. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 60–71, 2009     

Syndiospecific polymerization of styrene with Cp*TiCl((OCH(R)CH2)2NAr)/MMAO

A series of titanium complexes Cp*TiCl((OCH(R)CH₂)₂NAr) (Cp* = C₅Me₅, R = H, Ar = Phenyl ( 2a) ; R = H, Ar = 2,6‐dimethylphenyl ( 2b ); R = Me, Ar = Phenyl ( 2c )) was prepared by the reaction of corresponding N,N‐diethoxylaniline derivatives, with Cp*TiCl₃ in the presence of excessive triethylamine. All the titanium complexes display higher catalytic activities towards the syndiospecific polymerization of styrene in the presence of modified methylaluminoxane (MMAO) as a cocatalyst, and produce higher molecular weight polystyrenes with higher syndiotacticity and melting temperature than their mother complex Cp*TiCl₃. The catalyst activities and polymer yields as well as polymer properties are considerably affected by the steric and electronic effect of the tridentate ligands. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1562–1568, 2005     

Positron annihilation lifetime studies of free volume in a polymer electrolyte PEO complexed with NH4I

Positron lifetime spectroscopy has been applied to study the temperature dependence of free-volume properties in a solvent-free polymer–salt complex polyethylene oxide (PEO) doped with ammonium iodide (NH₄I, with NH ≈ 0.076) in the temperature range of 298–353 K. The observed lifetime spectra were resolved into three components and the longest lifetime, τ₃, was associated with the pick-off annihilation of ortho-positronium (o-Ps) trapped by the free volume. The lifetime component, τ₃, and its intensity, I₃, both showed a significant variation with temperature, which followed a different course in the heating and cooling cycle. Changes in the temperature coefficient of τ₃ and I₃ were observed at T ≈ 328 K, the melting point of the sample. This behaviour is correlated to the temperature variation of the electrical conductivity. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 969–976, 1998     

Highly enhanced thermoelectric performance of WS2 nanosheets upon embedding PEDOT:PSS

Two‐dimensional (2D) WS₂ nanosheets (NSs) as a promising thermoelectric (TE) material have gained great concern recently. The low electrical conductivity significantly limits its further development. Herein, we reported an effective method to enhance the TE performance of WS₂ NSs by combining poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS). The restacked WS₂ NSs thin film with 1T phase structure obtained by a common chemical lithium intercalation show a high Seebeck coefficient of 98 μV K^?1 and a poor electrical conductivity of 12.5 S cm^?1. The introduction of PEDOT:PSS with different contents obviously improve the electrical conductivity of WS₂ NSs thin films. Although a declining Seebeck coefficient was observed, an optimized TE power factor of 45.2 μW m^?1 k^?1 was achieved for WS₂/PEDOT:PSS composite thin film. Moreover, the as‐prepared WS₂/PEDOT:PSS thin film can be easily peeled off and transferred to other substrate leading to a more promising application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 997–1004     

Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Specific ionic conduction in poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–Li salt complexes under high‐pressure CO2

We measured the ionic conductivity of amorphous poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–lithium salt complexes under a CO₂ pressure varying from 0.1 to 20 MPa. The pressure dependence of the conductivity was positive, and the conductivity was higher than that under an inert gas such as N₂. The ion‐conductive behavior has been modeled using both the Vogel–Tammann–Fulcher (VTF) equation and activation volume theory. The calculated parameters of the VTF equation show that CO₂ that had permeated into the PMEO matrix acts as solvent molecules to dissolve ions and lower the glass transition temperature at high pressures. The ionic conduction in PMEO complexes under high‐pressure CO₂ was scarcely related to the VTF parameters and activation volume equations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3151–3158, 2005     

Water sorption and diffusion coefficients of protons and water in PVDF-g-PSSA polymer electrolyte membranes

Water sorption properties, proton NMR spectra, and diffusion of water and protons in poly(vinylidene fluoride)-graft-polystyrene sulfonic acid (PVDF-g-PSSA) polymer electrolyte membranes were studied. Sorption curves for the membranes with different degrees of grafting in protonated and Na⁺ form were measured by equilibrating the membranes over saturated salt solutions. The membrane water content was found to be sensitive to changes in relative humidity (RH). The water/sulfonic acid ratio λ for the protonated samples was around 2 at 20% RH and increased to λ ∼ 30 at 100%. Proton NMR, pulsed field gradient proton NMR (PFG-NMR), and impedance measurements were made on membranes with different λ. In the proton NMR spectra only one peak was found, originating from the water in the membrane. The chemical shift of the peak was found to be dependent on the counterion and the water content. The water self-diffusion coefficients D_H2O, measured by PFG-NMR, increased with degree of grafting and water content of the membranes. The proton conductivity and the calculated proton mobility decreased more steeply than the D_H2O with decreasing water content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2893–2900, 1999     

Ionic conductivity of multiarm star polymer/LiClO4 electrolytes

A series of polymer electrolytes based on multiarm polymers and lithium salt complexes were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and impedance measurement. The relationships of conductivity with salt concentration, temperature, and arm numbers are discussed. It is suggested that the star polymer has a higher solvency and ion transfer ability on lithium salts than on linear polymers. The conductivity maximum appeared at a higher salt concentration ([EO]/[Li] = 4). Impedance measurement suggested that the optimum conductivity was 2 × 10^?4 s · cm^?1. The conductivity increased with temperature and the dependence of ionic conductivity on temperature fits the Arrhenius equation. Among the studied systems, the star polymer with a five arm number performs better than other structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4195–4198, 2004     

Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

Ionic conductivity of complexes of novel multiarmed polymers with phosphazene core and LiClO4

Novel multiarmed polymers with ethylene oxide units, [( CH₂CH₂O)_n : 7, n = 3; 8, n= 7.2; 9, n = 11.8, and 12, n = 11.8] were prepared from the reaction of polyethylene glycol monomethyl ethers with acid chlorides of hexakis(3,5-dicarboxyphenoxy)-( 6 ) and hexakis(4-carboxyphenoxy)cyclotriphosphazenes ( 11 ) and conductivities of their Li⁺ salt complexes were investigated. The glass transition temperatures of the salt-free polymers are in the temperature range −59 to −54°C, indicative of a high degree of reorientational mobility of the arms. When LiClO₄ was added to the multiarmed polymers, the T_g values raised monotonically. The extent of T_g elevation was affected by the length of arms and the number of oxygen atoms around cyclotriphosphazene core and increased in the order 7 > 8 > 12 > 9 . The conductivities increased in the order 9 > 8 = 12 > 7 and the maximum conductivities of 4.0 × 10⁻⁵ S/cm at 30°C and 6.0 × 10⁻⁴ S/cm at 90°C have been achieved for the 9 -Li⁺ complex with Li⁺/O = 0.03. Interestingly, the conductivity of 9 -Li⁺ complexes at constant reduced temperatures increased in the whole concentrations of LiClO₄ examined (Li⁺/O = 0.01–0.2), although the degree of increase in conductivity above Li⁺/O = 0.06 became small. From the behaviors of T_g and the conductivity of multiarmed polymer–LiClO₄ complexes, it appears that the conductivity is governed by relative concentrations of inter- and intramolecular complexes in the polymer matrix. The influence of structural change of the comb-shaped to multiarmed polymers on the conductivity is described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1839–1847, 1997     

Polymer complexes. LXVII: electrical conductivity and thermal properties of polymer complexes of quinoline azo dye

A novel series of divalent transition metals (Cu²⁺, Co²⁺ and Ni²⁺) polymer complexes of azo ligand named 5-(2,3-dimethyl-1-phenylpyrazol-5-one azo)-8-hydroxyquinoline (Q) have been synthesized. The azo quinoline ligand (Q) and polymer complexes are characterized by various physicochemical techniques. The thermal properties of the ligand and its isolated polymer complexes are studied using thermogravimetric analysis. The physicochemical investigations elucidate that the azo ligand acts as a neutral bis(bidentate) ligand. The polymer complexes are found to be octahedral geometry. The change in the ac electrical conductivity, loss tangent and dielectric properties are studied upon heating in temperature region 298–550 K and frequency ranging from 0.1 to 100 kHz, moreover, the mechanism of conduction is determined. The electrical conductivity studies indicate that the ligand (Q) and polymer complexes have the semiconducting behavior. The correlated barrier hopping is the dominant conduction mechanism for all samples.