By in situ reduction of Ag+ ions pre‐dispersed inside thermosensitive microspheres of poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)] (P(NIPAM‐co‐MAA)), a 3D copolymer‐supported network of silver nanoparticles is created and extensively characterized by surface‐enhanced Raman scattering (SERS). The effective dispersion and the suitable density of the silver nanoparticles in the composite microspheres are demonstrated by the thermal‐induced SERS signal and its high reproducibility during thermocycling. When the temperature of the system increases above 32 °C, spatial separation of the silver nanoparticles decreases and the numbers of Ag nanoparticles and P(NIPAM‐co‐MAA) microspheres under illumination spot increase as a result of the shrinkage of the P(NIPAM‐co‐MAA) chains, leading to the ramp of the SERS effect. By means of the high reversibility of the thermosensitive phase transition of the P(NIPAM‐co‐MAA) microspheres, SERS activity of the silver nanoparticle network embedded in the microsphere can be well controlled by thermal‐induced variation of special separation.
A thermally sensitive copolymer, poly(N‐isopropylacrylamide‐co‐styrene) [P(NIPAM‐co‐St)] (Mn?9.5×105 g/mol and Mw/Mn?1.51) was synthesized by soap‐free emulsion polymerization. The phase separation of the copolymer in water was investigated by Rayleigh scattering (RS) technique. The RS spectra revealed the transition of molecular conformation and the aggregation of molecular chains in the course of phase separation. The coil‐to‐globule and globule‐to‐coil transitions of P(NIPAM‐co‐St) chains were found in one heating‐and‐cooling cycle. By means of Avrami formula, apparent activation energy of phase separation of P(NIPAM‐co‐St) aqueous solutions was estimated. Moreover, a model was proposed to describe the phase separation process. 相似文献
Copper sulfide‐poly(isopropylacrylamide‐co‐methacrylic acid) [CuS‐P(NIPAM‐co‐MAA)] hybrid microgels with patterned surface structures have been synthesized by means of the polymer microgel template technique. The results showed that the surface morphology of the hybrid microgels could be regulated by controlling the decomposition of thioacetamide (TAA) in an acidic medium. The rate of precipitation and the amount of metal sulfide significantly affect the surface structures of the hybrid microgels. 相似文献
N‐Isopropylacrylamide and vinyl imidazole copolymer, P(NIPAM‐co‐VI), was synthesized by free radical emulsion polymerization. Then, the copolymer and silver nanoparticle composite, P(NIPAM‐co‐VI)‐Ag, was prepared by in situ reduction of AgNO3 with NaBH4. Due to the coexistence of thermal‐responsive PNIPAM and pH‐responsive PVI, P(NIPAM‐co‐VI) and P(NIPAM‐co‐VI)‐Ag exhibited both thermal and pH responsibility, their size would change while altering the temperature or pH of the circumvent. Their thermal and pH dual responsive properties were studied by dynamic light scattering (DLS). P(NIPAM‐co‐VI)‐Ag could be stably dispersed in water at a pH range from 3.0 to 9.3, which is favorable to use P(NIPAM‐co‐VI)‐Ag as a catalyst in the reduction reaction of p‐nitrophenol. The reaction rate constant (kapp) increased with the decrease of pH or the increase of VI content in the copolymer. 相似文献
Acrylamide (AM) and methacrylic acid (MAA) copolymer microgels were prepared by a reverse suspension polymerization technique. The microgels were used as templates for the preparation of silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres. The surface structures of the microspheres prepared in this way are characterized by zigzag-like structures. It was found that the composition of the microgels, the nature and dosage of surfactants, the quantity of the metal, and even the reduction methods employed have a significant effect upon the surface structures of the microspheres. X-ray diffraction analysis confirmed that Ag formed during the process is in a crystal state of a face-centered cubic structure. 相似文献
The behavior of three copolymers of N-isopropylacrylamide (NIPAM), methacrylic acid (MAA), and hydrophobic moiety was studied at phospholipid monolayer/subphase interfaces. The hydrophobic moieties, N-terminal dioctadecylamine (DODA) and random octadecylacrylate (ODA), were used as anchoring groups. The interactions between a 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC) monolayer and the copolymers were studied using the Langmuir balance technique. The effect of subphase pH, distribution of anchors along the copolymer chain, and copolymer molecular weight on the nature of the interactions between the copolymer chains and the DSPC monolayer were investigated. A first-order kinetics model was used to analyze the copolymers adsorption at the DSPC monolayer/subphase interface and allowed the interaction area between the copolymer chains and the DSPC monolayer, A(x), to be determined. The interaction area appears to depend on the subphase pH and the copolymer molecular weight. On decreasing pH, the interaction area of high molecular weight copolymers increases significantly; this is consistent with the copolymer chain phase transition from an extended coil to a collapsed globule while pH is lowered. In the latter conformation, strong hydrophobic attractive interactions between the copolymer chains and the hydrophobic part of the DSPC monolayer favor the copolymer intercalation, which could eventually provoke the phospholipidic layer destabilization or rupture. 相似文献
A series of highly ordered mesoporous carbonaceous frameworks with diverse symmetries have been successfully synthesized by using phenolic resols as a carbon precursor and mixed amphiphilic surfactants of poly(ethylene oxide)‐b‐poly(propylene oxide)‐b‐poly(ethylene oxide) (PEO–PPO–PEO) and reverse PPO–PEO–PPO as templates by the strategy of evaporation‐induced organic–organic self‐assembly (EISA). The transformation of the ordered mesostructures from face‐centered (Fdm) to body‐centered cubic (Imm), then 2D hexagonal (P6mm), and eventually to cubic bicontinuous (Iad) symmetry has been achieved by simply adjusting the ratio of triblock copolymers to resol precursor and the relative content of PEO–PPO–PEO copolymer F127, as confirmed by small‐angle X‐ray scattering (SAXS), transmission electron microscopy (TEM), and nitrogen‐sorption measurements. The blends of block copolymers can interact with resol precursors and tend to self‐assemble into cross‐linking micellar structures during the solvent‐evaporation process, which provides a suitable template for the construction of mesostructures. The assembly force comes from the hydrogen‐bonding interactions between organic mixed micelles and the resol‐precursor matrix. The BET surface area for the mesoporous carbonaceous samples calcined at 600 °C under nitrogen atmosphere is around 600 m2 g?1, and the pore size can be adjusted from 2.8 to 5.4 nm. An understanding of the organic–organic self‐assembly behavior in the mixed amphiphilic surfactant system would pave the way for the synthesis of mesoporous materials with controllable structures. 相似文献
Analytical expressions for the scattering patterns of ordered nano- and mesoscopic materials are derived and compared to measured scattering patterns. Ordered structures comprising spheres (fcc, bcc, hcp, sc, and bct), cylinders (hex and sq), lamellae (lam) and vesicles, as well as bicontinuous cubic structures (Ia3d, Pn3m, and Im3m) are considered. The expressions take into account unit cell dimensions, particle sizes and size distributions, lattice point deviations, finite domain sizes, orientational distributions, core/shell-structures as well a variety of peak shapes. The expressions allow to quantitatively describe, model and even fit measured SAXS and SANS-patterns of ordered or oriented micellar solutions, lyotropic phases, block copolymers, colloidal solutions, nanocomposites, photonic crystals, as well as mesoporous materials. 相似文献
Summary: We follow the time development of the microdomain structure in symmetric polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) diblock copolymer thin films during acetone vapor treatment. Besides the highly ordered nanoscopic spheres or stripes as reported previously, a novel so‐called flower‐like pattern, which comprises six PS spheres and each PS sphere belongs to three “flowers” is formed. This finding is very helpful to discuss the highly ordered nanoscopic sphere formation process.
Transition from flower‐like structure to well‐ordered arrays of spheres, in which the flower‐like pattern, the transitional morphology, and the ordered spheres are in the portion A, B, and C, respectively. 相似文献