Anionic alternating copolymerization behavior of bifunctional six‐membered lactone and glycidyl phenyl ether

A copolymerization of 10‐methyl‐2H,8H‐benzo‐[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ) and glycidyl phenyl ether (GPE) was studied. 1 was a bislactone designed as a bifunctional analogue of 3,4‐dihydrocoumarin (DHCM), of which anionic 1:1 alternating copolymerization with GPE has been reported by us, previously. This alternating nature was inherited by the present copolymerization of 1 and GPE, leading to an intriguing copolymerization behavior in contrast to the ordinary statistical copolymerizations of monofunctional monomers and bifunctional monomers usually controlled by the proportional dependence of the crosslinking density on the monomer feed ratio: (1) When the feed ratio [GPE]₀/[ 1 ]₀ was 1, the two monomers underwent the 1:1 alternating copolymerization. In this case, 1 behaved as a monofunctional monomer, that is, only one of the two lactones in 1 participated in the copolymerization allowing the other lactone moiety to be introduced into the side chain almost quantitatively. (2) Increasing the feed ratio [GPE]₀/[1]₀ to larger than 4 allowed almost all of the lactone moieties to participate in the copolymerization system to give the corresponding networked polymers efficiently. The compositions of the copolymers [GPE unit]/[ 1 ‐derived acyclic ester unit] were always biased to smaller values than the feed ratios [GPE]₀/[lactone moiety in 1 ]₀ by the intrinsic 1:1 alternating nature of the copolymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3662–3668, 2009     

Aminimide derived from benzoylformic acid ester as photolatent base/radical initiator

An aminimide possessing a benzoyl substituent, 1,1‐dimethyl‐1‐(2‐hydroxypropyl)amine benzoylformimide (BFI), proved to serve as an excellent photobase catalyst. BFI decomposes smoothly by the UV irradiation to give products containing tertiary amines. The effective nature of BFI as a photo/thermal dual‐base catalyst was convinced by the thermal and photoinduced polymerization of epoxide/thiol system. Based on the facts that the mixture of BFI and epoxide/thiol exhibit a long pot life in dark and that it undergoes smooth polymerization by UV irradiation and heating, it was supported that BFI serves as an efficient photo/thermal latent dual‐base catalysts. It was also found that BFI initiates the free radical polymerization of vinyl monomers such as 2‐hydroxylethyl methacrylate (HEMA) under the UV irradiation while the mixture of BFI and HEMA also exhibit a long pot life in dark, indicating the excellent ability of BFI as a photoradical initiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Anionic alternating copolymerization of epoxide and six‐membered lactone bearing naphthyl moiety

This article describes the anionic copolymerization of glycidyl phenyl ether (GPE) and 1,2‐dihydro‐3H‐naphtho[2,1‐b]pyran‐3‐one (DHNP), a six‐membered aromatic lactone bearing naphthyl moiety. The copolymerization proceeded in a 1:1 alternating manner, to afford the corresponding polyester. The ester linkage in the main chain was cleavable by reduction with lithium aluminum hydride to give the corresponding diol that inherited the structure of the alternating sequence. The copolymerization ability of DHNP permitted its addition as a comonomer to an imidazole‐initiated polymerization of bisphenol A diglycidyl ether. The resulting networked polymer, of which main chain was endowed with the DHNP‐derived rigid naphthalene moieties, showed a higher glass transition temperature than that obtained similarly with using 3,4‐dihydrocoumarin (DHCM) as a comonomer, an analogous aromatic lactone bearing phenylene moiety instead of naphthalene moiety of DHNP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermal latency and structure–activity relationship of aminimides in the polymerization of epoxide

1,1-Dimethyl-1-(2-hydroxypropyl)amine p-substituted benzimide (“aminimide”) derivatives were prepared by the reaction of p-substituted methyl benzoates with equimolar amounts of 1,1-dimethylhydrazine and propylene oxide. These ylide compounds are shown to be useful as thermally latent initiators for the polymerization of glycidyl phenyl ether (GPE). Bulk polymerization of GPE with 3 mol % of these aminimides was carried out at 40–150°C for 8 h, showing ≥ 100°C was required for an effective rate. No consumption of the monomer could be observed at temperatures lower than 80°C. p-Methoxy substituted 1 showed the largest thermal latency among four aminimides tested. The activities of the aminimides increased with an increase of electron-donating ability of the substituents on the benzene ring, according to the following order: 1 (p-MeO) > 2 (p-Me) > 3 (H) > 4 (p-NO₂). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 689–694, 1997     

Anionic alternating copolymerization of a bifunctional six‐membered lactone and glycidyl phenyl ether: Selective synthesis of a linear polyester having lactone moiety

An imidazole‐initiated copolymerization of an aromatic bislactone, 10‐methyl‐2H,8H‐benzo[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ), and glycidyl phenyl ether (GPE) was investigated. In spite of the bifunctional nature of 1 that would potentially permit formation of networked and thus insoluble polymers upon its copolymerization, only one of the two lactone moieties of 1 exclusively underwent the copolymerization to give a linear polyester. Spectroscopic analysis of the polyester and its reductive scission into the corresponding fragment revealed that the polyester was formed by a 1:1 alternating copolymerization of GPE and the lactone moiety of 1 . The other lactone in 1 that did not participate in the copolymerization was quantitatively incorporated into the side chain of the polyester as a reactive site, of which ring‐opening reactions by amine and alcohol as nucleophilic reagents allowed chemoselective polymer reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1661–1672, 2009     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Synthesis of fluoro‐substituted silole‐containing conjugated materials

2,5‐Dihydroxyboryl‐1,1‐dimethyl‐3,4‐bis(3‐fluorophenyl)‐silole ( 2a ) was prepared in 40% overall yield by reaction between 3‐fluorophenyl‐acetylene and dichlorodimethylsilane to yield bis[2(3‐fluorophenyl)ethynyl]dimethylsilane ( 1a ), which subsequently undergoes a reductive cyclization reaction using an excess of lithium naphthalenide. The fluoro substituted silole was applied as a co‐monomer in the Suzuki polycondensation reaction with 2,7‐dibromo‐9,9‐dioctyl‐fluorene. An oligomer ( 3a ) with a degree of polymerization of 6 was prepared and compared with an oligomer without fluoro substitution on the silole ( 3b ), with a degree of polymerization of 4. The new oligomers were spin coated onto glass slides and showed weak green photoluminescence (PL) in the solid state. Cyclic voltammetry, visible absorption spectroscopy, and density functional theory calculations showed that the fluoro substituents were sufficiently electron withdrawing to lower both the highest occupied molecular orbital and the lowest unoccupied molecular orbital in the oligomer. Two further alternating co‐oligomers were prepared from 2,5‐dihydroxyboryl‐1,1‐dimethyl‐3,4‐bis(phenyl)‐silole ( 2b ) and 1,3‐dibromo‐5‐fluoro‐benzene ( 4a ) or 1,3‐dibromobenzene ( 4b ). These oligomers both had degrees of polymerization of 8 and showed green PL in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5116–5125, 2009     

Asymmetric polymerization using C1 resources

Two examples of asymmetric alternating copolymerization, (1) the alternating copolymerization of α‐olefins (monosubstituted ethenes) with carbon monoxide and (2) the alternating copolymerization of meso‐epoxide with carbon dioxide, are described, and the meaning of chirality in polymer synthesis is emphasized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 215–221, 2004     

Codendronized polymers pendent with alternating dendritic wedges

Codendronized polymers pendent with Fréchet‐type poly(benzyl ether) dendron and polyester dendron alternating structure have been produced by combining macromonomer and graft‐from approach. Alternating copolymerization of the styryl dendrons of three generations and N‐(2‐hydroxyethyl)maleimide was used to prepare the polymer backbone bearing the first kind of dendritic wedges, then polyester dendrons were grown up from the pendant hydroxy groups through iterative esterification and deprotection reactions. Then, a kind of codendronized polymer bearing different dendritic wedges with an alternating structure was thus obtained. Since the pendent dendrons were different and each of them was well‐defined, such codendronized polymer can be a multicompartment wormlike molecule. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3994–4001, 2007     

Novel approach to well‐defined polyester by living anionic alternating copolymerization of ethylphenylketene with 4‐methoxybenzaldehyde

A living anionic alternating copolymerization of ethylphenylketene (EPK) with 4‐methoxybenzaldehyde (MBA) was achieved. When n‐butyllithium was added to a mixture of EPK and MBA in tetrahydrofuran at ?40 °C in the presence of an excess amount of lithium chloride, the copolymerization of these monomers proceeded via complete 1:1 alternating manner to afford the polymer with a narrow molecular weight distribution. A linear relationship was observed between the molecular weight and the monomer/initiator ratio, keeping a narrow molecular weight distribution. The structure of the obtained polymer was determined to be a polyester by IR spectroscopy together with the reductive degradation of the polymer by lithium aluminum hydride, which quantitatively afforded the corresponding diol to the repeating unit of the expected polyester structure. Both conversions of EPK and MBA agreed to a first‐order kinetic equation with linear evolution between the molecular weight and conversion. These observations along with the successful results in two‐stage polymerization indicate that the present copolymerization proceeded through a living mechanism. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2078–2084, 2001     

Synthesis of phosphate‐pendant polymers and their application to thermally latent polymeric initiators

A novel phosphate monomer, O‐p‐(methacryloyloxymethyl)benzyl O,O‐diethyl phosphate (MDP) was synthesized by the reaction of diethyl phosphorochloridate with 1,4‐benzenedimethanol, followed by the reaction with methacryloyl chloride in the presence of triethylamine. The radical polymerization of MDP and copolymerization with methyl methacrylate were carried out in the presence of 2,2′‐azobisisobutyronitrile (3 mol %) in dimethylacetamide at 60 °C for 20 h to afford phosphate‐pendant polymers. The polymerization of glycidyl phenyl ether (GPE) was carried out with the phosphate‐pendant polymer as an initiator in the presence of ZnCl₂. The polymerization did not proceed below 90 °C but rapidly proceeded above 90 °C to afford polyGPE. The phosphate‐pendant polymer served as a good thermally latent polymeric initiator. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3365–3370, 2001     

Controlled cationic ring‐opening polymerization of cyclic thiocarbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the cyclic thiocarbonates 5‐benzoyloxymethyl‐5‐methyl‐1,3‐dioxane‐2‐thione ( 1 ), 5,5‐dimethyl‐1,3‐dioxane‐2‐thione ( 2 ), and 4‐benzoyloxymethyl‐1,3‐dioxane‐2‐thione ( 3 ). The polymerization was carried out with 2 mol % trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as the initiator to afford the polythiocarbonate with a narrow molecular weight distribution accompanying isomerization of the thiocarbonate group. The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after the quantitative consumption of the monomer in the first stage. The block copolymerization of 2 and 3 was also achieved, and this supported the idea that the cationic ring‐opening polymerization of these monomers proceeded via a living process. The order of the polymerization rate was 3 > 2 > 1 . The cationic ring‐opening polymerization of 1 and 3 involved the neighboring group participation of ester groups according to the polymerization rate and molecular orbital calculations with the ab initio method. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 185–195, 2003     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Spontaneous alternating copolymerization of isobutoxyallene with 4-phenyl-1,2,4-triazoline-3,5-dione

The spontaneous copolymerization of isobutoxyallene ( 1 ) with 4-phenyl-1,2,4-triazoline-3,5-dione ( 2 ) was carried out to afford a copolymer with a number-average molecular weight of 5900–10,300. The copolymer consisted of a 2,3-polymerization unit of 1 and a  NN polymerization unit of 2 , maintaining an alternating character regardless of the monomer feed ratio. The corresponding copolymerization of 1 with 2 in the presence of methanol afforded the adduct of the compounds without the polymer, indicating the generation of a zwitterion of 1 and 2 . © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1564–1571, 2001     

Proton transfer‐controlled anionic polymerization of methyl‐substituted β‐lactams with potassium t‐butoxide and subsequent coupling reaction with saccharides

The potassium t‐butoxide‐catalyzed ring‐opening polymerization of 3,3‐dimethyl‐ and 4,4‐dimethyl‐2‐azetidinone proceeds quantitatively in a mixture of N,N‐dimethylacetamide and 5–10 wt % of lithium chloride at 25°C to give the corresponding monodisperse polyamides. The addition of methyl α‐D ‐glucoside into the living polyamide system gives a novel polyamide linked with the glucose moiety at one chain end. A new graft copolymer composed of a water soluble polysaccharide (dextran) backbone and many monodisperse polyamide branches was also prepared by a similar coupling method. The difference in acidity among the lactam monomers, the corresponding polyamides, and the alcohols was essential for the attainment of such a proton transfer‐controlled system composed of the living polymerization and the subsequent coupling reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 909–915, 1999     

Micellar polymerization of amphiphilic poly(vinyl alcohol) macromonomer having a methacrylate end group prepared by aldol‐type group‐transfer polymerization

Amphiphilic and heterotactic‐rich poly(vinyl alcohol) (PVA) macromonomer, that is, PVA having a phenyl or phenoxyethyl methacrylate unit as the polymerizable end group, was synthesized via the aldol‐type group‐transfer polymerization (aldol‐GTP) technique. Aldol‐GTPs of vinyloxytriethylsilane (VOTES) were carried out in dichloromethane with 4‐methacryloylbenzaldehyde and 4‐(2‐methacryloylethoxy)benzaldehyde as the initiators with various Lewis acids. The polymerizations proceeded smoothly to give silylated PVA macromonomers (number‐average molecular weights: 1.3 × 10³–1.96 × 10⁴). Poly(VOTES) was easily desilylated to give heterotactic‐rich PVA macromonomer in good yield. The critical micelle concentration of the PVA macromonomer was determined by surface‐tension measurement. Micellar polymerization of the amphiphilic macromonomer gave comb‐shaped (graft) polymer having PVA side chains effectively (conversion: 80–82%), whereas polymerization in dimethyl sulfoxide (homogeneous state) did not. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4477–4484, 2002     

Structure–initiator activity dependence of aminimides as thermally latent initiators in the polymerization of glycidyl phenyl ether

Novel aliphatic aminimides were synthesized from the corresponding carboxylic acid esters, 1,1‐dimethylhydrazine, and epoxides in 54–95% yields. Bulk polymerization of glycidyl phenyl ether (GPE) with 3 mol % of the aminimides was evaluated by DSC as a model process for curing of epoxy resin. All the aminimides showed no exothermic DSC peak below 120 °C but showed sharp exothermic peaks above 137 °C, indicating good thermal latency. Good relationships were observed between the calculated bond length from the carbonyl carbon to the α‐carbon of the aliphatic group (R C), DSC onset temperatures, and the thermal dissociation temperatures (T_d 's) of the aminimides. The aminimide with a longer R C bond length showed lower T_d and DSC onset temperature, that is, higher activity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3428–3433, 2000     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011