SmI2－Mediated Addition Reaction of α－Halomethylsulfones to Carbonyl Compounds. A Convenient Synthesis of β－Hydroxysulfones

Due to the chemoselective dehalogenation by SmI2, the addition of a-halomethylsulfones to carbonyl compounds afforded ,β-hydroxysulfones. Those reactions with α-bromomethylsulfones gave the products in moderate to good yields. The SmI2-mediated addition of gem-dihalomethylsulfones to ketones also afforded α-halo-β-hydroxysulfones in moderate yields.     

Palladium‐Catalyzed Aza‐Wittig‐Type Condensation of Isoxazol‐5(4H)‐ones with Aldehydes

This paper describes the development of a palladium‐catalyzed decarboxylative inter‐ and intramolecular condensation reaction of isoxazol‐5(4 H)‐ones with carbonyl compounds in the presence of PPh₃, giving various 2‐azabuta‐1,3‐dienes or pyrroles in moderate to high yields.     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

纳米铝粉促进羰基化合物水相烯丙基化反应

氮气保护条件下,纳米铝在0.1 N NH₄Cl溶液中,能有效地促进羰基化合物与烯丙基溴进行Barbier-Grignard型烯丙基化反应,得到相应高烯丙醇。芳香族醛或酮的烯丙基化产率较高,而脂肪族羰基化合物反应产率低,反应产率受羰基空间位阻影响大,在同样条件下,邻羟基羰基化合物烯丙基化产物主要是赤式-邻二醇。     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

High pressure‐assisted synthesis of 1,2,3‐trialkyldiaziridines from N‐chloroalkylamines

New method for the preparation of 1,2,3‐trialkyldiaziridines 1 in high yields, based on the transformation of N‐chloroalkylamines 3 without using carbonyl compounds in the presence of primary aliphatic amines with the same alkyl fragment, potassium carbonate and a small amount of water in CHCl₃ under high pressure (500 MPa), was developed. Diaziridines 1 can be synthesized in the same conditions using a larger amount of potassium carbonate instead of primary aliphatic amines however in lower yields. The kinetic investigations on the synthesis of 1,2‐diethyl‐3‐methyldiaziridine 1a from N‐chloroethylamine 3a have shown that the reaction leading to diaziridine 1a proceeds according to the law of the second order.     

无气味、实用的缩硫醛/酮化反应试剂：2-（1，3-二噻-2-亚基）-3-羰基丁酸甲酯

a-Oxo ketene dithioacetals, methyl 2-（1,3-dithian/dithiolan-2-ylidene）-3-oxobutanoate （2a/2b） prepared in nearly quantitative yields simply from methyl acetylacetate, carbon disulfide and 1,3-dibromopropane/1,2-dibromoethane in the presence of potassium carbonate, were investigated in the thioacetalization with various carbonyl compounds 3. It has been demonstrated that methyl 2-（1,3-dithian-2-ylidene）-3-oxobutanoate （2a） could act as a nonthiolic, odorless and practical thioacetalization reagent. A range of aldehydes and ketones 3 were converted into the corresponding dithioacetals 4 in high yields （up to 91%） in the presence of 2a. Moreover, 2a showed high chemoselectivity between aldehyde and ketone in thioacetalization.     

Ir(III)‐Catalyzed C7‐Position‐Selective Oxidative CH Alkenylation of Indolines with Alkenes in Air

An efficient method for C7‐position‐selective alkenylation of N‐substituted indolines with alkenes is reported. Various 7‐alkenylindolines were obtained in moderate to excellent yields in air in the presence of catalytic amounts of [Cp*IrCl₂]₂, AgOTf, and Cu(OAc)₂. The protocol relies on the use of a carbonyl or carbamoyl group on the nitrogen atom of indoline as a directing group and is potentially applicable to the synthesis of 7‐alkenylindoles and 7‐alkylindoles.     

Preparation of (S,S)‐Fmoc‐β2hIle‐OH, (S)‐Fmoc‐β2hMet‐OH,and (S)‐Fmoc‐β2hTyr(tBu)‐OH for Solid‐Phase Syntheses of β2‐ and β2/β3‐Peptides

The preparation of three new N‐Fmoc‐protected (Fmoc=[(9H‐fluoren‐9‐yl)methoxy]carbonyl) β²‐homoamino acids with proteinogenic side chains (from Ile, Tyr, and Met) is described, the key step being a diastereoselective amidomethylation of the corresponding Ti‐enolates of 3‐acyl‐4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐ones with CbzNHCH₂OMe/TiCl₄ (Cbz=(benzyloxy)carbonyl) in yields of 60–70% and with diastereoselectivities of >90%. Removal of the chiral auxiliary with LiOH or NaOH gives the N‐Cbz‐protected β‐amino acids, which were subjected to an N‐Cbz/N‐Fmoc (Fmoc=[(9H‐fluoren‐9‐yl)methoxy]carbonyl) protective‐group exchange. The method is suitable for large‐scale preparation of Fmoc‐β²hXaa‐OH for solid‐phase syntheses of β‐peptides. The Fmoc‐amino acids and all compounds leading to them have been fully characterized by melting points, optical rotations, IR, ¹H‐ and ¹³C‐NMR, and mass spectra, as well as by elemental analyses.     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.     

Alkali Metal and Organo Group‐14 Element Ferrocenecarbo­selenoates: Synthesis and Structures

Lithium, sodium, and potassium ferrocenecarboselenoates were synthesized in good yields by the reaction of ferrocenoyl chloride with the corresponding metal selenides. In air, the saltsquickly oxidized to give diferrocenoyl diselenide. The salts readily reacted with alkyl and organo‐germanium, ‐tin and ‐lead halides to give the corresponding Se‐alkyl and Se‐organo Group‐14 element ferrocenecarboselenoates [(FcCOSe)_xMPh_4–x (M = Ge, Sn, Pb; x = 1–3) in moderate to good yields. In contrast, the reaction of the sodium and potassium salts with trimethylsilyl chloride led to O‐trimethylsilyl ferrocenecarboselenoate FcCSeOSiMe₃. Treatment of the O‐silyl ester with RbF and CsF led to rubidium and cesium ferrocenecarboselenoates, respectively, in good yields. The structures of FcCOSetBu, (FcCOSe)₂SnPh₂, and FcCOSePbPh₃ were revealed by X‐ray molecular structure analysis.     

Chemical transformation of bis((perfluoroalkyl)sulfonyl)methanes and 1,1,3,3‐tetraoxopolyfluoro‐1,3‐dithiaycloalkanes

Halogenation of the potassium or silver salts of bis((trifluoromethyl)sulfonyl)methane(CF₃SO₂)₂CH₂ and its cyclo analogues (CF₂)_nSO₂‐CH₂SO₂CF₂ with N‐fluoro‐bis((trifluoromethyl)sul‐fonyl)imine (CF₃SO₂)₂NF, chlorine or bromine gave good yields of the corresponding α‐halo disulfones (CF₃SO₂)₂CHX and (CF₂)_nSO₂CHXSO₂CF₂ (X: F, Cl, Br; n = 1,2). Some chemical transformations of these fluorinated α‐halo‐disulfones are described. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 147–151, 1999     

Preparation of choline chloride–urea deep eutectic solvent‐modified magnetic nanoparticles for synthesis of various 2‐amino‐4H‐pyran derivatives in water solution

A novel hybrid magnetic nanocatalyst was synthesized by covalent coating of Fe₃O₄ magnetic nanoparticles with choline chloride–urea deep eutectic solvent using 3‐iodopropyltrimethoxysilane as a linker. The structure of this new catalyst was fully characterized via elemental analysis, transmission and scanning electron microscopies, X‐ray diffraction and Fourier transform infrared spectroscopy. It was employed in the synthesis of various 2‐amino‐4H ‐pyran derivatives in water solution via an easy and green procedure. The desired products were obtained in high yields via a three‐component reaction between aromatic aldehyde, enolizable carbonyl and malononitrile at room temperature. The employed nanocatalyst was easily recovered using a magnetic field and reused four times (in subsequent runs) with less than 8% decrease in its catalytic activity.     

Luminescence properties of three structures built from 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate and alkaline metals (Na,K and Rb)

The structures of three salts of 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate with alkali metals (Na, K and Rb) are related to their luminescence properties. The Rb salt, rubidium(I) 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate, Rb⁺·C₈HN₄O₂⁻, is isomorphous with the previously reported potassium salt. For the Na compound, sodium(I) 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate dihydrate, Na⁺·C₈HN₄O₂⁻·2H₂O, two independent sodium ions, located on inversion centers, are coordinated by four water molecules each and additionally by two cyano groups for one and two carbonyl groups for the other. The luminescence spectra in solution are unaffected by the nature of the cation but vary strongly with the dielectric constant of the solvent. In the solid state, the emission maxima vary with structural features; the redshift of the maximum luminescence varies inversely with the distance between the stacked anions.     

4‐Chloro‐3′‐methylsulfinyl‐5(6 or 8)‐nitro‐3,4′‐diquinolinyl sulfides

Reaction of 4‐chloro‐3′‐methylthio‐3,4′‐diquinolinyl sulfides 3, 9b, 9c with a nitrating mixture proceeds via the 3′‐methylthio group monooxidation and yields 3′‐methylsulfinyl diquinolinyl sulfides 4, 5b, 5c , respectively. Further treatment of 4 with a nitrating mixture followed as C₅‐ and C₈‐nitration and gives mixture of 5a and 5c. Treatment of 3′‐methylsulfinyl quinolines 6 and 7 with hydrochloric acid/potassium iodide system causes reduction of the sulfoxide group in 6 and 7 to the sulfide group yielding 8 , in case of 4‐methoxyquinolines 6 , hydrolysis of the 4‐methoxyquinoline moiety to the 4‐quinolinone moiety takes place simultaneously. The proton and carbon chemical shifts of 4 and 5a were completely assigned following COSY, HETCOR and INEPT or COLOC studies.     

Catalytic Divergent [3+3]‐ and [3+2]‐Cycloaddition by Discrimination Between Diazo Compounds

Highly selective divergent cycloaddition reactions of enoldiazo compounds and α‐diazocarboximides catalyzed by copper(I) or dirhodium(II) have been developed. With tetrakis(acetonitrile)copper(I) tetrafluoroborate as the catalyst epoxypyrrolo[1,2‐a]azepine derivatives were prepared in good yields and excellent diastereoselectivities through the first reported [3+3]‐cycloaddition of a carbonyl ylide. Use of Rh₂(pfb)₄ or Rh₂(esp)₂ directs the reactants to regioselective [3+2]‐cycloaddition generating cyclopenta[2,3]pyrrolo[2,1‐b]oxazoles with good yields and excellent diastereoselectivities.     

Efficient Synthesis of Polycyclic γ‐Lactams by Catalytic Carbonylation of Ene‐Imines via Nickelacycle Intermediates

The nickel(0)‐catalyzed carbonylative cycloaddition of 1,5‐ and 1,6‐ene‐imines with carbon monoxide (CO) is reported. Key to this reaction is the efficient regeneration of the catalytically active nickel(0) species from nickel carbonyl complexes such as [Ni(CO)₃L]. A variety of tri‐ and tetracyclic γ‐lactams were thus prepared in excellent yields with 100 % atom efficiency. Preliminary results on asymmetric derivatives promise potential in the synthesis of enantioenriched polycyclic γ‐lactams.     

Reaction with hydrazonoyl halides XXIII [1]: Synthesis and reactions of C‐coumarinoyl‐N‐arylformohydrazonoyl bromides

C‐Coumarinoyl‐N‐arylformohydrazonoyl bromides ( 3 ) were synthesized by reaction of N‐nitrosoarylacetamides with an appropriate sulfonium bromide in ethanol at room temperature. The reactions of potassium thiocyanate, potassium selenocyanate, thiourea, methyl phenylthiocarbomate, and methyl phenylhydrazinedithioate with hydrazonoyl bromide 3a were examined. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 355–362, 1999     

Triazolylbenzimidazolthiones and derivatives of the new 1,2,3‐triazolo[ 1,5‐a][ 1,3,5]benzotriazepine heterocycle

Four new triazolylbenzimidazolthione derivatives (2a‐d), analogous to triazolylbenzimidazolone derivatives previously tested as activators of the BK_Ca potassium channels, were prepared and assayed without success. Some derivatives of a new tricyclic nitrogen heterocycle, 1,2,3‐triazolo[1,5‐a][1,3,5]benzo‐triazepine, bearing a carboxamido group in the 3 position, other substituents in the 8 position and a carbonyl (5a‐d) or thione (6a‐c) or methylthio (7a‐c) function in the 5 position were synthesised. The nucleophilic displacement of the methylthio substituent with morpholine or cyclopentylamine provided the 5‐amino‐substituted tricyclic derivatives 8a‐d. Starting from the l‐(2‐nitrophenyl)‐4‐cyano‐5‐amino‐1,2,3‐triazole (9), the 3‐cyano‐triazolobenzotriazepin‐5‐one derivative 12 was also obtained. The majority of the new compounds were tested towards the BK_Ca potassium channels, the benzodiazepine and adenosine A₁ and A_2a receptors, but no remarkable activity was detected.     

Fe3O4@ZrO2/SO42‐: A recyclable magnetic heterogeneous nanocatalyst for synthesis of β‐amino carbonyl derivatives and synthesis of benzylamino coumarin derivatives through Mannich reaction

In the present work, we developed an effective protocol for the synthesis of β‐amino carbonyl compounds and synthesis of benzylamino coumarin derivatives through Mannich type reaction in high yields. Fe₃O₄@ZrO₂/SO₄^2‐ was employed as an effective heterogeneous nanocatalyst for the Mannich reaction. This research consists of two sections. In first section, β‐amino carbonyl derivatives were synthesized under solvent‐free condition. In the other section, benzylamino coumarin compounds were synthesized at room temperature. The present approach offers several advantages such as short reaction times, low cost, easy work‐up, mild reaction conditions, high yields and ease of recovery and reusability of the catalyst without significant loss of activity.