Silicon‐modified surfactants and wetting: V. The spreading behaviour of trimethylsilane surfactants on energetically different solid surfaces

The spreading behaviour of defined trimethylsilane‐based surfactants of general formula (CH₃)₃Si(CH₂)₆(OCH₂CH₂) _nOCH₃, n = 2–6, on five different solid surfaces at 21 °C has been investigated. Compounds bearing short diethylene and triethylene glycol hydrophiles do not spread. For the longer‐chained tetraethylene to hexaethylene glycol derivatives, the ability to spread depends on the surface energy. Rapid spreading is restricted to the slightly polar surface of 40 mN m⁻¹ surface energy. Lower or higher surface energies considerably reduce the spreading rates. The phase behaviour of the solutions substantially influences the spreading process. The dispersed systems of the tetraethylene glycol derivative spread constantly over long time intervals. The dispersions of the pentaethylene glycol analogue are very close to the temperature for a transition into the one‐phase state. A retardation of the spreading process occurs after a few seconds. Micellar solutions of the hexaethylene glycol derivative either spread very slowly or stop spreading after a few seconds. The largest spreading areas and highest initial spreading rates were found for the 0.1 wt% solutions. Copyright © 1999 John Wiley & Sons, Ltd.     

Silicon‐modified surfactants and wetting: IV. Spreading behaviour of trisiloxane surfactants on energetically different solid surfaces

The spreading behaviour of defined trisiloxane surfactants of general formula [(CH₃)₃SiO]₂ CH₃Si(CH₂)₃(OCH₂CH₂) _nOCH₃ (n = 3–9) on five different solid surfaces has been investigated. Maximum spreading areas and rates are found on non‐polar or slightly polar surfaces of 30 to 40 mN m⁻¹ surface energy. Extremely low or high surface energies substantially reduce the spreading rates. On non‐polar surfaces rapid spreading is observed for 1 wt % solutions of the relatively short‐chained penta‐ and hexa‐ethylene glycol derivatives. On slightly polar surfaces dilute 0.1 wt % solutions of longer‐chained derivatives spread faster. This spreading pattern shift coincides with a change of the phase behaviour. Solutions of Silwet L77 do not prefer one specific surface, since 1 wt % solutions abruptly stop spreading after a few seconds and the maximum spreading rates are found for 0.1 wt % solutions. Therefore, Silwet L77 essentially belongs among the long‐chained derivatives. Copyright © 2000 John Wiley & Sons, Ltd.     

Silicon‐modified surfactants and wetting: I. Synthesis of the single components of Silwet L77 and their spreading performance on a low‐energy solid surface

Defined surfactants of general formula [(CH₃)₃SiO]₂CH₃Si(CH₂)₃(OCH₂CH₂)_3–9OCH₃, have been synthesized from the corresponding oligoethylene glycol monoallyl monomethyl ethers via hydrosilylation. The concentration‐dependent spreading performance on hydrophobized silicon wafers has been investigated and compared with that of Silwet L77. For the hexaethylene glycol derivative the highest initial spreading velocities and largest spreading areas were found. Since Silwet L77 spreads faster than all the other derivatives under investigation, a synergistic effect of different compounds is unlikely. Minor differences were found for handshaken and sonicated solutions. Copyright © 1999 John Wiley & Sons, Ltd.     

Silicon-modified carbohydrate surfactants. VII: Impact of different silicon substructures on the wetting behaviour of carbohydrate surfactants on low-energy surfaces — distance decay of donor–acceptor forces

The wetting behaviour of carbohydrate surfactants bearing siloxane, carbosilane, polysilane or silane moieties has been investigated. By static surface tension (γ_lv, σ) and wetting tension (γ_sv−γ_sl, α) measurements on a non-polar perfluorinated surface (FEP®), the contact angles of aqueous surfactant solutions above the critical micelle formation concentration (cmc) were determined. Surface tension and wetting tension react independently on defined changes in the chemical structure of the surfactant molecules. Siloxane surfactants reduce the surface tension most effectively, whereas for a neopentyl-substituted silane derivative the lowest solid/liquid interfacial tension was found. The data for isomeric siloxanes, carbosilanes and silanes suggest that donor–acceptor forces at solid interfaces have a maximum range of about 4.5 Å. © 1998 John Wiley & Sons, Ltd.     

Silicon‐modified surfactants and wetting: II. Temperature‐dependent spreading behaviour of oligoethylene glycol derivatives of heptamethyltrisiloxane

The temperature‐dependent spreading performance of defined trisiloxane surfactants of the general formula [(CH₃)₃SiO]₂CH₃Si‐­(CH₂)₃(OCH₂CH₂)_3–9OCH₃ and Silwet L77 on a trimethylsilylated silicon‐wafer surface has been investigated. At 6 °C the tetraethylene glycol derivative showed the highest initial spreading rate. At 40 °C the octaethylene glycol derivative was the fastest spreader. It is shown that spreading behaviour and phase behaviour are closely related. The highest initial spreading rates were found for solutions in the two‐phase state (2Φ) closely above the liquid–liquid insolubility boundary. Copyright © 1999 John Wiley & Sons, Ltd.     

Syntheses and properties of ethoxylated double‐tail trisiloxane surfactants containing a propanetrioxy spacer

A new type of ethoxylated double‐tail trisiloxane surfactants containing a propanetrioxy spacer of the general formula ROCH₂CH(OR)CH₂O(CH₂CH₂O)_xCH₃ [R = Me₃SiOSiMe(CH₂)₃OSiMe₃, x = 8.4, 12.9, 22] has been synthesized. Their structures were characterized by ¹H‐NMR, ¹³C‐NMR and ²⁹Si‐NMR spectroscopy. The critical micelle concentration (CMC) values of these double‐tail trisiloxane surfactants were at the level of 10⁻⁵ mol l⁻¹, and the surface tension values of their aqueous solutions at CMC were in the range of 21‐24.9 mN m⁻¹. Only the double‐tail trisiloxane surfactant with average ethoxy units of 8.4 ( 1P ) possesseda good spreading ability (SA) value. Its SA values of aqueous solutions (5.0 × 10⁻³ mol l⁻¹) on parafilm and Ficus microcarpa leaf surfaces were more than 15 (within 10 min) and 13 (within 3 min), respectively. The trisiloxane surfactant 1P was also found to have the strongest hydrolysis resistant ability among all of the double‐tail trisiloxane surfactants prepared. Its aqueous solutions were stable for 130 days in an acidic environment (pH 4.0) and 59 days in an alkaline environment (pH 10.0) with surface tension values less than 23 mN m⁻¹. It is suggested that this surfactant can be used as a wetting agent or spreading agent in certain extreme pH environments. Copyright © 2011 John Wiley & Sons, Ltd.     

Silicon-modified carbohydrate surfactants. IV. The impact of substructures on the wetting behaviour of siloxanyl-modified carbohydrate surfactants on low-energy surfaces

The siloxanyl-modified carbohydrate surfactants investigated consist of the four structural elements: (1) siloxanyl moiety; (2) spacer; (3) carbohydrate unit; and (4) modifying element. By static surface tension (γ_sν — γ_sβ α) measurements the contact angles of the aqueous surfactant solutions above the critical micelle formation concentration (cmc) on nonpolar perfluorinated surfaces (FEP^® plate) were determined. Although the siloxanyl units were found to have a high capacity to level out the interfacial properties, both surface tension and wetting tension react independently to defined changes in the chemical structure of the surfactant molecules. The results of spreading experiments on polyproylene show good correlation with the dependences found by wetting meaurements. © 1997 John Wiley & Sons, Ltd.     

Reactive surfactants in heterophase polymerization. XXV. Core–shell lattices stabilized with a mixture of maleic anionic and styrenic nonionic surfactants

Core–shell lattices with a polystyrene core and a polystyrene/butyl acrylate shell with more than 40% solid contents were produced using a combination of sodium dodecyl maleate hemiester as anionic surfactant and styrenic block copolymer of butylene oxide and ethylene oxide as nonionic surfactant. Stable lattices able to resist rather high concentrations of electrolytes can be obtained, provided a careful protocol of the addition of surfactants is used. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2251–2262, 1999     

Adsorption of mixtures of nonionic sugar-based surfactants with other surfactants at solid/liquid interfaces II. Adsorption of n-dodecyl-beta-D-maltoside with a cationic surfactant and a nonionic ethoxylated surfactant on solids

Synergy and antagonism between sugar-based surfactants, a group of environmentally benign surfactants, and cationic surfactants and nonionic ethoxylated surfactants have been investigated in this study with solids which adsorbs only one or other when presented alone. Sugar-based n-dodecyl-beta-D-maltoside (DM) does not adsorb on silica by itself. However, in mixtures with cationic dodecyltrimethylammonium bromide (DTAB) and nonionic nonylphenol ethoxylated decyl ether (NP-10), DM adsorbs on silica through hydrophobic interactions. In contrast, although DM does adsorb on alumina, the presence of NP-10 reduces the adsorption of DM as well as that of the total surfactant adsorption. Such synergistic/antagonistic effects of sugar-based n-dodecyl-beta-D-maltoside (DM) in mixtures with other surfactants at solid/liquid interfaces were systematically investigated and some general rules on synergy/antagonism in mixed surfactant systems are identified. These results have implications for designing surfactant combinations for controlled adsorption or prevention of adsorption.     

Silicon-modified carbohydrate surfactants VI: Synthesis of carbosilane,silane, polysilane and non-permethylated siloxane derivatives; the wetting behaviour of epoxy-modified precursor liquids on non-polar surfaces

The synthesis of carbohydrate surfactants bearing carbosilane, silane, polysilane and non-permethylated siloxane moieties is described. These surfactants consist of three structural elements: (1) a silicon-containing moiety, (2) a spacer and (3) a carbohydrate unit. Additionally two different types of mixed structures have been synthesized: (a) single-chained carbosilane–siloxane surfactants and (b) double-chained combinations of carbo- silanes, silanes and siloxanes. The wetting behaviour of the key intermediates, the allyl glycidyl derivatives, has been investigated by static surface tension (γ_lv, σ) and wetting tension (γ_sv−γ_sl, α) measurements on a non-polar perfluorinated surface (FEP® plate). The contact angles obtained for these pure liquids are not a linear function of the surface tension but depend on the polarity of the substructures. © 1998 John Wiley & Sons, Ltd.     

表面活性剂在低能固体表面上的吸附 Ⅲ: 聚苯乙烯胶乳粒子对阴离子表面活性剂的吸附

在无乳化剂的条件下合成了粒径均匀的聚苯乙烯胶乳, 发展了应用表面张力计测定吸附等温线的连续平衡法, 得到不同盐浓度下聚苯乙烯胶乳对十二烷基硫酸钠和十二烷基苯磺酸钠的吸附等温线, 它们属于Giles分类的L2 型或L1 型, 采有两阶段吸附模式讨论了吸附机理, 吸附层结构及等温线类型变化的规律。     

The review on properties of solid catanionic surfactants: Main applications and perspectives of new catanionic surfactants and compounds with catanionic assisted synthesis

Mixtures of anionic and cationic surfactants display varied aggregate structures. Solid catanionic systems and metaloamphiphilic complexes, amphiphilic host–guest systems, as well as amphiphilic hydrogen bond pairs are a kind of hybrid amphiphiles, all of which self-organize into supramolecular membranes. Amphiphilicity of the supermolecules drives their hierarchical self-assembly. This review mainly discusses the current applications of well-ordered catanionic materials that show a variety of functionalities in material and life science. Widely studied rational molecular design can create self-assembled structures through various noncovalent interactions combined with numerous modification strategies. Possible applications are at early stage to access the entire potential, but may provide new and interesting interdisciplinary directions for further studies.     

Influence of compaction and surface roughness on low‐energy ion scattering signals

Investigation of the surface composition of powders often requires compaction. To study the effect of compaction on surface analysis, samples have been compacted at various pressures ranging from 0 Pa (i.e. no compaction) up to 2000 MPa (2 × 10⁴ kg cm^?2) Low‐energy ion scattering (LEIS) was used to determine the composition of the outermost atomic surface layer. Using scanning electron microscopy, changes in the morphology due to compaction have been detected in the SiO₂ test samples. The LEIS yield of a compacted silica powder is found to be independent of the applied pressure during compaction between 2 MPa and 2000 MPa (2 × 10⁴ kg cm^?2). Analysis of a submonolayer of Ta₂O₅ on a silica support shows that the composition of the outermost atomic layer is not changed after compaction up to a pressure of at least 300 MPa. When compaction is applied, the absolute LEIS yield appears to be independent of the specific surface area of silica supports in the range 50–380 m² g^?1. A minor difference in LEIS signals is observed between compacted silica supports and flat quartz samples. In order to determine the surface roughness factor independently, and to study the material dependence of the surface roughness factor, angle‐dependent LEIS measurements have been carried out on oxidized silicon, gallium and gold surfaces. The results on the oxidized silicon confirm the small influence of surface roughness for silica particles, whereas measurements on the more closely packed metallic gallium and gold surfaces indicate a significant surface roughness effect. Copyright © 2004 John Wiley & Sons, Ltd.     

Investigations on mixed micelles of binary mixtures of zwitterionic surfactants and triblock polymers: a cyclic voltammetric study

Cyclic voltammetry has been employed to investigate the mixed micellar behavior of the binary mixtures of different zwitterionic surfactants such as 3-(N,N-dimethylhexadecylammonio)propane sulfonate (HPS), 3-(N,N-dimethyltetradecylammonio)propane sulfonate (TPS) and 3-(N,N-dimethyldodecylammonio)propane sulfonate (DPS) with three triblock polymers (L64, F127 and P65) by using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as an electroactive probe at 25 °C. Critical micellar concentration (cmc) has been determined from the plots of variation in peak current (i_p) versus the total concentration of surfactant/triblock polymer. Diffusion coefficient of the electroactive species has also been reported. The regular solution theory approximation has been used to determine various micellar parameters of ideal systems. The variation in micellar mole fraction (X₁) of the zwitterionic surfactant supports the formation of mixed micelles, which are rich in triblock polymer component in the surfactant rich region of the mixture and vice versa. The regular solution interaction parameter (β) suggests the formation of mixed micelles due to the synergistic interactions in case of HPS/TPS/DPS + F127/P65 systems and gets affected by EO/PO ratio of triblock polymers.     

Adsorption of cationic and nonionic surfactants on a SiO<Subscript>2</Subscript> surface from aqueous solutions: 1. Adsorption of dodecylpyridinium bromide and Triton X-100 from individual solutions

Adsorption of cationic surfactant dodecylpyridinium bromide and nonionic surfactant Triton X-100 from aqueous solutions on the surface of SiO₂ particles is studied at various pH values (3.6, 6.5, and 10). The data on the adsorption are compared with the data on the wetting of quartz plates by solutions of these surfactants. Adsorption of both studied surfactants on the SiO₂ surface is greatly dependent on solution pH. The mechanism of adsorption of the cationic surfactant is shown to be changed when passing to the alkaline pH region. Triton X-100 does not demonstrate a substantial change in the adsorption mechanism in the pH range from 3.6 to 10.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 2, 2005, pp. 274–280.Original Russian Text Copyright © 2005 by Kharitonova, Ivanova, Summ.     

Adsorption of cationic and nonionic surfactants on a SiO<Subscript>2</Subscript> surface from aqueous solutions: 2. Adsorption of dodecylpyridinium bromide and Triton X-100 from mixed solutions

Adsorption of cationic (dodecylpyridinium bromide) and nonionic (Triton X-100) surfactants from their mixed aqueous solutions on a SiO₂ surface at pH 3.6, 6.5, and 10 is studied by the UV spectroscopy, capillary zone electrophoresis, and wetting measurements. It is shown that the adsorption of cationic and nonionic surfactants from mixed solutions is accompanied by synergistic effects manifesting themselves as an enhanced adsorption of both surfactants compared to their adsorption from individual solutions. The effect of second component becomes most pronounced under conditions when differences in adsorption abilities of individual surfactants are rather large (at pH 3.6 and 10). It is shown that the adsorption of surfactants from mixed solutions can be controlled by the adsorption ability of components via the variations in solution pH.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 2, 2005, pp. 281–287.Original Russian Text Copyright © 2005 by Kharitonova, Ivanova, Summ.     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via surface‐initiated ATRP and their surface properties: The effects of polymerization conditions

A series of superhydrophobic poly(methacryloxypropyltrimethoxysilane, MPTS‐b‐2,‐2,3,3,4,4,4‐heptafluorobutyl methacrylate, HFBMA)‐grafted silica hybrid nanoparticles (SiO₂/PMPTS‐b‐PHFBMA) were prepared by two‐step surface‐initiated atom transfer radical polymerization (SI‐ATRP). Under the adopted polymerization conditions in our previous work, the superhydrophobic property was found to depend on the SI‐ATRP conditions of HFBMA. As a series of work, in this present study, the effects of polymerization conditions, such as the initiator concentration, the molar ratio of monomer and initiator, and the polymerization temperature on the SI‐ATRP kinetics and the interrelation between the kinetics and the surface properties of the nanoparticles were investigated. The results showed that the SI‐ATRP of HFBMA was well controlled. The results also showed that both the surface microphase separation and roughness of the hybrid nanoparticles could be strengthened with the increase of the molecular weight of polymer‐grafted silica hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010