13C NMR and electron spin resonance analyses of the radical polymerization of diisopropyl itaconate

Radical polymerizations of dialkyl itaconates were performed in benzene at 50 °C. The ¹³C NMR spectra of the obtained polymers indicated that intramolecular chain‐transfer reaction had taken place more frequently in the polymerizations of itaconates with bulkier ester groups as follows: isopropyl (i‐Pr) > n‐butyl (n‐Bu) ≈ ethyl (Et) > methyl (Me). In addition to the ¹³C NMR analysis, an electron spin resonance (ESR) analysis was conducted for polymerizations of diisopropyl itaconate, the ESR spectra of which consisted of two kinds of resonances due to the radicals with different conformations. It was assumed that the difference in conformation was attributable to the stereosequences near the propagating chain end because the relative intensity ratios of the resonances varied with the magnitude of the intramolecular chain‐transfer reaction, which was accompanied by a decrease in the syndiotacticity of the obtained poly(diisopropyl itaconate)s. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4513–4522, 2002     

Glass-transition temperature of polydialkyl fumarate copolymers

Two dialkyl fumarate monomers were copolymerized with styrene and methyl methacrylate. The reactivity ratios of the monomers were calculated, and the glass transition temperature-composition diagrams for the copolymers were measured. The experimental T_g data of the copolymers were fitted to several empirical equations proposed in the literature. A comparison is made between the copolymers and the blends of the corresponding polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1839–1845, 1999     

Initiation of radical polymerization by peroxyacetates: Polymer end-group analysis by electrospray ionization mass spectrometry

End-groups of poly(methyl methacrylate) from radical solution polymerization of MMA using tert-butyl peroxyacetate (TBPA), tert-amyl peroxyacetate (TAPA), 1,1,2,2- tetramethylpropyl peroxyacetate (TMPPA), and 1,1,3,3-tetramethylbutyl peroxyacetate (TMBPA) as the initiators were analyzed via electrospray ionization mass spectrometry (ESI-MS). The type and the relative concentration of the radical species, which actually initiate macromolecular growth, are determined. In the majority of cases, these species differ from the primary radicals from thermal decomposition of the peroxyacetates. Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was applied for unambiguous peak assignment. The methylcarbonyloxyl radical, which is formed by the decomposition of all peroxyacetates, was found to undergo decarboxylation yielding an initiating methyl radical. TAPA- and TMPPA-derived alkoxyl radicals mainly show β-scission, TMBPA-derived alkoxyl radicals additionally undergo a 1,5-hydrogen-shift reaction. The tert-butoxyl radicals produced from TBPA undergo pronounced chain-transfer reaction prior to their decomposition into methyl radicals and acetone. In the case of using benzene as a relatively inert solvent, the tert-butoxyl radicals exhibit transfer to monomer yielding polymer molecules, which do not carry any initiator-derived end-groups. By using mesitylene as a cosolvent, small amounts of star polymer were generated via multiple hydrogen abstraction by tert-butoxyl radicals from the three individual methyl groups of mesitylene. This uncomplicated procedure of modification of end-group and polymer topology may be attractive for facile adjustment of polymer viscosity in technical processes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2453–2467, 2007     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. III. Effect of amine type antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals in polyethylene (PE) formed by the thermal decomposition of DCP above 120°C. The type and the content of radicals were much changed for amine type antioxidants on PE crosslinking. It was confirmed that the radicals originated from DCP decomposition reacted preferentially with the amine type antioxidants to produce the nitroxyl radical and that the antioxidants retarded the initiation reaction of the PE crosslinking reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 349–356, 1999     

Radical polymerization of styrene in the presence of C60

Radical polymerizations of styrene in the presence of C₆₀ have been conducted at 90°C in benzene using benzoyl peroxide (BPO) as initiator. The behaviors of C₆₀ are investigated by monitoring BPO concentration, C₆₀ content, and polymerization time. It is found that C₆₀ acts like a radical absorber which multiply absorbs primary radicals from BPO and propagating radicals. Therefore, in the presence of C the yield and molecular weight decrease significantly. However, the molecular weight distribution is narrowed down by its coupling characteristics. At the beginning of the reaction, owing to the radical-absorbing effect of C₆₀, it makes the chain-propagation restricted. However, the number of polystyrene chains added to C₆₀ increases with polymerization time. Direct dilatometric experiment proves that C₆₀ is mainly as inhibitor for radical polymerization of styrene by benzoyl peroxide. Besides, the glass transition temperature (T_g) of the copolymers increases with increasing content of C₆₀. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2969–2975, 1999     

Polymerization of N-alkyl-substituted itaconimides and N-(alkyl-substituted phenyl)itaconimides and characterization of the resulting polymers

N-alkyl-substituted itaconimides (RII) and N-(alkyl-substituted phenyl)itaconimides (RPhII) with various alkyl substituents were prepared and polymerized in the presence of a radical or anionic initiator to give high molecular weight polymers in high yields. The effects of the alkyl substituents on the polymerization reactivities were investigated. It has been revealed that RII and RPhII have the highest polymerization reactivity compared with other itaconic and citraconic derivatives including dialkyl itaconates and citraconimides. The structure and some properties of poly(RII) and poly(RPhII) were examined. These polymers were found to have excellent thermal stability, better than poly (dialkyl itaconate)s. © 1994 John Wiley & Sons, Inc.     

Substituted propenyl end groups as reactive intermediates in radical polymerization

The addition of propagating radicals of methyl acrylate (MA) and styrene (St) to CH₂?C(CO₂CH₃)CH₂? and CH₂?C(C₆H₅)CH₂? ω‐end groups of poly(methyl methacrylate) (PMMA) and polystyrene (PSt) was investigated. The end groups were as reactive as MA and St toward the poly(methyl acrylate) (PMA) and PSt radicals, respectively. The adduct radical derived from the two types of PMMA end groups and PMA radicals underwent β fragmentation exclusively to yield PMMA radicals and end groups bound to PMA chains. The addition of PSt radicals to PMMA with CH₂?C(CO₂Me)CH₂? end groups resulted in adduct radicals that underwent β fragmentation and addition to St or coupling with PSt radicals. Adduct radicals formed by the addition of PMA radicals to both types of end groups of PSt exclusively formed C? C bond by coupling with PMA radicals to form branched structures or by addition to MA monomer to give a copolymer. The fate of the adduct radicals was highly dependent on the type of polymer chain and the substituent bound to the end group. Steric congestion of the adduct radical arising from the α‐methyl group of the PMMA chain was considered to be crucial for fragmentation to expel the PMMA radical. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 645–654, 2003     

Efficiency of peroxyderivatives in the chemical modification of polyethylene

The thermal decomposition of dialkyl peroxides, peroxyketals, and peroxyesters was realized in order to study the functionalization of polyethylene in the molten state. Two radicals were produced: one to abstract a hydrogen to the polyolefin, the other to combine with such a macroradical. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2957–2963, 2000     

Reaction control in radical polymerization of di‐n‐butyl itaconate utilizing a hydrogen‐bonding interaction

We have reported that intramolecular chain‐transfer reaction takes place in radical polymerization of itaconates at high temperatures and/or at low monomer concentrations. In this article, radical polymerizations of di‐n‐butyl itaconate (DBI) were carried out in toluene at 60 °C in the presence of amide compounds. The ¹³C‐NMR spectra of the obtained poly(DBI)s indicated that the intramolecular chain‐transfer reaction was suppressed as compared with in the absence of amide compounds. The NMR analysis of DBI and N‐ethylacetamide demonstrated both 1:1 complex and 1:2 complex were formed at 60 °C through a hydrogen‐bonding interaction. The ESR analysis of radical polymerization of diisopropyl itaconate (DiPI) was conducted in addition to the NMR analysis of the obtained poly(DiPI). It was suggested that the suppression of the intramolecular chain‐transfer reaction with the hydrogen‐bonding interaction was achieved by controlling the conformation of the side chain at the penultimate monomeric unit of the propagating radical with an isotactic stereosequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4895–4905, 2004     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Free radical polymerization with catalytic chain transfer: Using NMR to probe the strength of the cobalt–carbon bond in small molecule model reactions

This work examines cobalt–carbon bond formation between the cobalt (II) macrocycle, (tetrakis(p‐methoxyphenyl)porphyrinato)cobalt (II), (TAP)Co, and a variety of radicals derived from vinyl compounds to facilitate a better understanding of the various factors affecting the cobalt–carbon bond strength in catalytic chain transfer polymerization. The reaction of (TAP)Co with the following vinylic molecules was studied: methacrylonitrile, cyclohexene, methyl methacrylate, styrene, methyl acrylate, vinyl acetate, vinyl benzoate, methyl crotonate, cis‐2‐pentenenitrile, and ethyl α‐hydroxymethacrylate. Different concentrations of each vinylic compound were added to (TAP)Co and 2,2′‐azobis(isobutyronitrile) in CDCl₃ at 60 °C. The ratio of Co(III) to Co(II) and the nature of the radical bound to the cobalt macrocycle were determined via nuclear magnetic resonance measurements. Several factors are shown to affect the reaction of the radical and the cobalt (II) species (and hence the strength of the cobalt–carbon bond in the resulting compound). These factors are as follows: the number of pathways by which a radical may be derived from the vinyl compound; the variety of radicals that can be produced from the vinylic molecule; the stability of the radical(s) generated; and the relative propagation rate of the vinyl compound. A discussion on the relevance of this study to the behavior of different monomers in catalytic chain transfer reactions is included. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6171–6189, 2006     

Selective formation of diblock copolymers using radical trap‐assisted atom transfer radical coupling

Polystyrene (PSt) radicals and poly(methyl acrylate) (PMA) radicals, derived from their monobrominated precursors prepared by atom transfer radical polymerization (ATRP), were formed in the presence of the radical trap 2‐methyl‐2‐nitrosopropane (MNP), selectively forming PSt‐PMA diblock copolymers with an alkoxyamine at the junction between the block segments. This radical trap‐assisted, atom transfer radical coupling (RTA‐ATRC) was performed in a single pot at low temperature (35 °C), while analogous traditional ATRC reactions at this temperature, which lacked the radical trap, resulted in no observed coupling and the PStBr and PMABr precursors were simply recovered. Selective formation of the diblock under RTA‐ATRC conditions is consistent with the PStBr and PMABr having substantially different K_ATRP values, with PSt radicals initially being formed and trapped by the MNP and the PMA radicals being trapped by the in situ‐formed nitroxide end‐capped PSt. The midchain alkoxyamine functionality was confirmed by thermolysis of the diblock copolymer, resulting in recovery of the PSt segment and degradation of the PMA block at the relatively high temperatures (125 °C) required for thermal cleavage. A PSt‐PMA diblock formed by chain extenstion ATRP using PStBr as the macroinitiator (thus lacking the alkoxyamine between the PSt‐PMA segements) was inert to thermolysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3619–3626     

Star polymers by ATRP of styrene and acrylates employing multifunctional initiators

Multifunctional initiators for atom transfer radical polymerization (ATRP) are prepared by converting ditrimethylolpropane with four hydroxyl groups, dipentaerythritol with six hydroxyl groups, and poly(3‐ethyl‐3‐hydroxymethyl‐oxetane) with ～11 hydroxyl groups to the corresponding 2‐bromoisobutyrates or 2‐bromopropionates as obtained by reaction with acid bromides. Star polystyrene (PS) is produced by using these macroinitiators and neat styrene in a controlled manner by ATRP at 110 °C, employing the catalytic system CuBr and bipyridine. M_n up to 51,000 associated with narrow molecular weight distributions (PDI < 1.1) are obtained with conversions up to 32%. Hydrolysis of the star‐PS leads to linear chains having the expected M_n values. The star‐PS polymers based on dipentaerythritol degrade thermally in nitrogen in a two‐step process in which the first low‐temperature step involves scission of the ester linkages and the second step corresponds to the normal PS degradation. Star poly(methyl acrylates) with various cores are likewise prepared in a controlled manner by ATRP of methyl acrylate in bulk and in solution at 60–80 °C with the 1,1,4,7,7‐pentamethyldiethylene triamine ligand. Under these conditions, higher conversions were possible still maintaining low PDI signaling controlled star growth. Multiarm stars of poly(n‐butyl acrylate) and poly(n‐hexyl acrylate) with controlled characteristics have also been prepared. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3748–3759, 2005     

Controlled radical polymerization catalyzed by copper(I)–sparteine complexes

Sparteine was found to be an efficient ligand because when complexed with copper(I) halide it generated a homogeneous catalyst for the atom transfer radical polymerization of styrene or methyl methacrylate, which was initiated by (1-bromoethyl)benzene in the former case and by p-toluenesulfonyl chloride in the latter. The plots of ln([M]₀/[M]) versus time and molecular weight versus monomer conversion exhibited linear dependencies, which indicated that the concentration of the living centers throughout polymerization was constant. The polydispersities of polystyrene and poly(methyl methacrylate) in both the bulk and solution polymerizations were quite low. An induction time was observed during the bulk polymerization of styrene; however, it was absent during the solution polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4191–4197, 1999     

Polymerization of (p‐vinylphenyl)hydrogalvinoxyl and formation of a stable polyradical derivative

4‐[(3,5‐Di‐tert‐butyl‐4‐hydroxyphenyl)(3,5‐di‐tert‐butyl‐4‐oxo‐cyclohexa‐ 2,5‐dienylidene)methyl]styrene (abbreviated as (p‐vinylphenyl)hydrogalvinoxyl) was polymerized using AIBN as an initiator to give a bright yellow polymer with M w = 3.2 × 10⁴. The polymer was oxidized to give the corresponding polyradical derivative, whose spin concentration could be increased up to about 70 mol % depending on oxidative conditions. ESR signal line‐width in the solid state was greatly increased below 200 K for the polyradical with a high spin concentration (> 50 mol %). The magnetization and magnetic susceptibility indicated weak antiferromagnetic interaction among the radical sites. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 189–198, 1999     

Radical grafting from glass fiber surface: Graft polymerization of vinyl monomers initiated by azo groups introduced onto the surface

This paper describes the radical graft polymerization of vinyl monomers from glass fiber surface initiated by alkylazo groups introduced onto the fiber surface. The introduction of azo groups onto the glass fiber surface was achieved by reaction of isocyanate groups which were previously attached onto the surface with two kinds of azo initiators, 4,4′-azobis(4-cyanopentanoic acid) (ACPA) and 2,2′-azobis(2-cyanopropanol) (ACP). The amounts of surface azo groups introduced by ACPA and ACP were both determined to be 1.3 × 10⁻⁵ mol g⁻¹ by nitrogen analysis. The radical graft polymerization of methyl methacrylate (MMA) was found to be initiated in the presence of the glass fiber having surface azo groups. During the polymerization, part of resultant poly(MMA) grafted onto the fiber surface through propagation of the polymer from the surface radicals produced by the decomposition of the azo groups. The percentage of grafting of poly(MMA) reached 48.1% after 24 h. The graft polymerizations of other monomers, such as styrene, N-vinylcarbazole, and acrylic acid, were also initiated by the surface azo groups, and the corresponding polymer effectively grafted onto the surface. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2121–2128, 1999     

Syntheses and radical polymerization behavior of novel optically active methacrylamides having (L)-leucine structure in the side chains

Syntheses and radical polymerizations of methacrylamides having (L)-leucine and N-methyl-(L)-leucine methyl ester structures in the side chains N-methacryloyl-(L)-leucine methyl ester (MA-L-M) and N-methyl-N-methacryloyl-(L)-leucine methyl ester (N-Me-MA-L-M) were carried out. The monomers were prepared by the reactions of methacryloyl chloride with the corresponding amino acid methyl esters. Radical polymerizations were carried out in the presence of appropriate initiators at 60°C and 120°C. MA-L-M afforded the corresponding polymer with M_ns 38,000 ∼ 372,000 in high yields, while N-Me-MA-L-M afforded a trace amount of polymer at 60°C and in a low yield even at 120°C. Both inversion and increase of absolute value of specific rotation were observed in the transformation from MA-L-M (+1.3°C) to poly(MA-L-M) (−35.7°C). Changes in the CD spectral pattern and the conformation of the leucine moiety were confirmed from the monomer to polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2681–2690, 1998     

Effects of solvent as an electron-pair acceptor on propagation reactions during radical polymerization and copolymerization of polar vinyl monomers

We carried out radical homopolymerization and copolymerization in various kinds of solvents at 60°C by using diisopropyl fumarate (DiPF) and methyl methacrylate (MMA) as electron-accepting polar monomers and styrene (St) and vinyl benzoate (VB) as electron-donating monomers. The highest polymerization rate was observed in the polar and electron-pair accepting solvents, such as 2,2,2-trifluoroethanol for the homopolymerization and copolymerization of these monomers. It has been revealed that the polymerization rate is correlated to the electron-pair–accepting property of the solvent used, rather than the polarity in the linear free energy relationship. We have demonstrated the validity of the acceptor number as the index for interpreting the interaction of the solvent with the monomer and the propagating chain end. The monomer reactivity ratios were determined for the St–DiPF, VB–DiPF, and St–MMA copolymerizations. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2803–2814, 1999     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Fluorocarbon‐ended polymers: Metal catalyzed radical and living radical polymerizations initiated by perfluoroalkylsulfonyl halides

Perfluoroalkylsulfonyl chlorides and bromides initiate metal catalyzed free radical polymerization of both hydrocarbon and fluorocarbon monomers affording polymers with perfluoroalkyl end groups. In the case of styrene (S) and methyl methacrylate (MMA) with Cu‐based catalysts the process affords polymers with a relatively narrow molecular weight distribution and linear dependence of molecular weight on conversion, suggesting that a living radical polymerization mechanism occurs. The orders of reaction in monomer, initiator and catalyst for these polymerizations were determined. In the case of PMMA, the detailed structure of a perfluorobutane chain‐end was determined by NMR analysis. Perfluoroalkylsulfonyl chlorides are stable in neutral aqueous media. This permits their use as initators for fluoroolefin polymerizations in H₂O. Poly(tetrafluoroethylene‐co‐hexafluoropropylene) was obtained in good yield with few ionic end groups. The aqueous fluoroolefin polymerization appears to be catalyzed by metal zero species from the reactor walls. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3313–3335, 2000