Synthesis and specific biodegradation of novel polyesteramides containing amino acid residues

Novel polyesteramides were synthesized from p‐nitrophenyl esters of sebacic or adipic acids and diamines containing α‐amino acid ester groups. The optimal polymerization condition was 60 °C in N,N‐dimethylformamide. The structures of these polymers were confirmed by IR and NMR. The number‐average molecular weights of these polyesteramides ranged from 2280 to 23,600 (except for the polymers containing glycine residues), depending on the nature of the amino acid used. The biodegradability of the polyesteramides was investigated by in vitro hydrolysis with proteases and a lipase as catalysts in borate buffer solutions. The results indicated that the polymers containing L ‐phenylalanine were hydrolyzed most effectively by α‐chymotrypsin, subtilisin Carlsberg, and subtilisin BPN′. The polyesteramides containing other amino acid residues also underwent hydrolysis to different extents, reflecting the substrate specificity of the proteases. Lipase had almost no effect on the hydrolytic degradation of these polyesteramides. The polymers containing glycine residues were hardly decomposed by any of the enzymes used. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1318–1328, 2001     

Synthesis and characterization of oxazoline-functional polymer particles by free radical nonaqueous dispersion polymerization

A novel oxazoline-functional methacrylate was prepared and employed as comonomer to produce nonaqueous dispersions of oxazoline-functional polymer particles. In nonaqueous free radical dispersion copolymerization of methylmethacrylate in the presence of oxazoline-functional methacrylate, ethyleneglycoldimethacrylate crosslinking agent, AIBN initiator, and polystyrene-block-poly(ethene-alt-propene) dispersing agent, the average polymer particle size, varying between 100 and 500 nm, was controlled by the dispersing agent contents. According to titration with HClO₄ all oxazoline groups regardless of their location at particle surface or bulk, were accessible. Glass transition temperature decreased from 120 to 0°C when oxazoline functional methacrylate was increased from 0 to 95 mol %. As imaged by atomic force microscopy incorporation of the new oxazoline-functional methacrylate improved film formation. Oxazoline-functional polymer particles were easy to redisperse in a variety of other diluents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2539–2548, 1997     

Polymers from a levopimaric acid–acrylic acid Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylic acid was efficiently prepared from resin acids. When the adduct was subjected to a dehydrodecarboxylation reaction, a ketone diacid derivative was obtained. New ketone type linear polymers were synthesized by the advanced dehyrodecarboxylation, a nonconventional polycondensation reaction, of both the above in presence of sulfonic catalysts. The polyketones turned out to be excellent tackifiers in adhesive formulae. The ketone polymers were condensed with diamines to give crosslinked polyazomethines. The structures of the monomers and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyketones and polyazomethines were low‐molecular‐weight polymers, soluble in some polar and nonpolar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were substances with good thermal stability, except the polyazomethine synthesized by the condensation of polyketone with an aromatic diamine, which appeared to be a substance with high thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5979–5990, 2007     

Synthesis of thiadiazoles and 1,2,4-triazoles derived from cyclopropane dicarboxylic acid

New heterocyclic derivatives of cyclopropane dicarboxylic acid comprising thiadiazole and 1,2,4-triazole moieties are reported. Reaction of 1,1-cyclopropane dicarboxylic acid (1) with thiosemicarbazide and phosphorous oxychloride resulted in 1,1-bis (2-amino-1,3,4-thiadiazol-5- yl)cyclopropane (2). Cyclopropane dicarboxylic acid thiosemicarbazide (6) was converted into 1,1-bis(3-thio-4H-1,2,4-triazol-5-yl) cyclo- propane (7) by ring closure in an alkaline medium. The thiadiazole 2 and the triazole 7 were converted into a variety of derivatives.     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Preparation of polyamides derived from 1,6-diamantane dicarboxylic chloride by solution polycondensation and interfacial polycondensation

1,6-Diamantane dicarboxvlic acyl chloride ( I ) was used as a monomer with various aromatic diamines to synthesize polyamides by interfacial polycondensation and solution polycon-densation. The polyamides prepared by interfacial polycondensation had inherent viscosities between 0.38 and 0.15 dL/g. The polyamides prepared by solution polycondensation had inherent viscosities between 0.62 and 0.25 dL/g. The polyamides IIIa prepared by solution polycondensation showed the main melting transition at 380°C by dynamic mechanical analysis. In addition, it was quite temperature-stable and maintained good mechanical properties (G′?10⁸ Pa) up to high temperatures close to the main transition well above 350°C. The polyamide IIIA had a tensile strength of 35 MPa, elongations to break of 10%, and initial modulus of 0.8 GPa. Some of the polyamides were soluble in NMP, DMAc, and DMSO, depending on soft segment moiety of diamine ( II ). The polyamides prepared by interfacial polycondensation have a greater tendency to form crystal than those prepared by solution polycondensation, as evidenced by x-ray diffraction studies. These polyamides had glass transition temperatures in the 270–300°C range, and 5% weight loss temperatures up to 435°C in nitrogen. © 1995 John Wiley & Sons, Inc.     

New synthetic method for aromatic polyketones from bis(arylsilane)s and aromatic dicarboxylic acid chlorides

A new synthetic method for aromatic polyketones was developed through Friedel–Crafts polycondensation of bis(arylsilane) monomers with aromatic dicarboxylic acid chlorides. The solution polycondensation of these monomer pairs in the presence of aluminum chloride in 1,2‐dichloroethane readily afforded aromatic polyketones having inherent viscosities up to 0.37 dL/g with the elimination of chlorotrimethylsilane. The polycondensation proceeded through aromatic electrophilic ipso substitution, the mechanism of which is very similar to that of normal Friedel–Crafts acylation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2729–2735, 2002     

Synthesis and characterization of polyarylates derived from 4,4′-dihydroxy-meta-terphenyl and aromatic diacid chlorides

Polyarylates derived from 4,4″-dihydroxy-meta-terphenyl (DHmTP) were prepared by the phase-transfer catalyzed, two-phase polycondensation with aromatic diacid chlorides. The resulting polymers were crystalline, solvent resistant, and produced brittle films. Copolymers with bisphenol-A were also synthesized using isophthaloyl diacid chloride. At low to moderate levels of DHmTP in the copolymers (25–75%), the materials had high glass transition temperatures (186–201°C), good solvent resistance, and gave tough, clear films. Terpolymers of DHmTP and BPA with 50:50 isophthaloyl and terphthaloyl diacid chloride were prepared with not much improvement over Ardel D-100®. All the DHmTP-polyarylates had good thermal stability (5% weight loss in air > 415–460°C) and had a high % char (20–48%). © 1994 John Wiley & Sons, Inc.     

两种新型溶致型液晶芳香聚酯酰胺的合成与表征

从单体4,4′-对苯二甲酸酯基二苯甲酰氯制备开始,合成了三种可在N-甲基吡咯烷酮(NMP)中溶解且特性粘数较高的溶致液晶芳香聚酯酰胺。其中酰氯单体与4,4′-二氨基二苯甲烷反应生成的聚酯酰胺粘度较高,其NMP溶液25℃下的特性粘数可达1.7dl/g。这种聚酯酰胺具有交替的酯、酰胺基结构,其NMP溶液浓度为15%时在偏光显微镜下可观察到明显的液晶双折射,并且可以刮板成膜。     

Synthesis and properties of aromatic polyamides derived from 1,6-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,6-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,6-dihydroxynaphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,6-bis(4-nitrophenoxv)naphthalene, followed by hydrazine hydrate/Pd—C reduction. A series of polyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved metal salts such as CaCl₂ or LiBr using triphenyl phosphite and pyridine as condensing agents. The polymers were obtained in quantitative yield with inherent viscosities of 0.78–3.72 dL/g. Most of the polymers were soluble in aprotic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), NMP, and they could be solution-cast into transparent, flexible and tough films. The casting films had tensile strength of 102–175 MPa, elongation at break of 8–42%, and tensile modulus of 2.4–3.8 GPa. The polymers derived from rigid dicarboxylic acids such as terephthalic acid and 4,4′-biphenyldicarboxylic acid exhibited some crystalline characteristics. The glass transition temperatures of the polyamides were in the range of 238–337°C, and their 10% weight loss temperatures were above 487°C in nitrogen and above 438°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of novel aromatic polyamides derived from 1,5-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,5-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,5-dihydroxy-naphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,5-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd? C reduction. A series of polyamides and copolyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids or with mixed dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The polymers having inherent viscosity of 0.81–1.25 dL/g were obtained in quantitative yield. Most of the polymers were generally soluble in aprotic solvent such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, etc. The polymers derived from rigid dicarboxylic acids such as terephthalic acid, naphthalene dicarboxylic acid, and 4,4′-biphenyldicarboxylic acid exhibited crystalline patterns. Glass transition temperatures of polymers were in the range of 230–360°C, and 10% weight loss temperatures in nitrogen and air were above 492 and 470°C, respectively. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyamides derived from 1,7-bis(4-aminophenoxy)naphthalene and various aromatic dicarboxylic acids

A series of novel bis(phenoxy)naphthalene-containing polyamides having inherent viscosity up to 2.02 dL/g were synthesized by the direct polycondensation of the diamine 1,7-bis(4-aminophenoxy)naphthalene with various aromatic dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Most of the polyamides could be readily dissolved in polar aprotic solvents such as N,N-dimethylacetamide and NMP, and could be solution-cast into transparent, flexible, and tough films. These polymers had glass transition temperatures in the range of 139–263°C, and 10% weight loss temperatures in nitrogen and air were above 499 and 484°C, respectively. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of sulfone-containing polyesters derived from 4,4′-dicarboxydiphenyl sulfone by direct polycondensation

Several sulfone-containing polyesters having inherent viscosities 0.43-0.19 dL g^?1 were prepared by direct polycondensation of 4,4′-dicarboxydiphenyl sulfone (DCDPS) with various aromatic and aliphatic diols, by p-toluenesulfonyl chloride and N,N′-dimethylformamide in pyridine solution. The polyesters were examined by elementary analysis, IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. The diffraction diagram showed that all polyesters were crystalline except that obtained from bisphenol-A. All polymers were soluble in sulfonic acid (18M), phenol and p-chlorophenol, but not in acetone and toluene. These polymers obtained from aromatic bisphenols lost no mass below 325°C, but 10% loss of mass was recorded above 396°C in nitrogen. DCDPS copolymerized with isophthalic acid (IPA) and bisphenol-A had inherent viscosity up to 0.49 dL g^?1, with relatively narrow distribution of molar mass . © 1995 John Wiley & Sons, Inc.     

New regioselective synthesis of metalinked aromatic polyketones from metasubstituted bis(arylsilane)s and aromatic dicarboxylic acid chlorides

A new regioselective synthesis of metalinked aromatic polyketones was achieved for the first time. New metaconnected aromatic polyketones with inherent viscosities of up to 0.49 dL/g were regioselectively synthesized by the solution polycondensation of metasubstituted bis(arylsilane)s with aromatic dicarboxylic acid chlorides in the presence of aluminum chloride in 1,2‐dichloroethane along with the elimination of chlorotrimethylsilane. The polycondensation proceeded through aromatic electrophilic ipso‐substitution. The metalinked aromatic polyketones had considerably lower glass‐transition temperatures and 10% weight‐loss temperatures than those of their counterpart paracatenated aromatic polyketones. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1428–1434, 2003     

Polycondensations of dicarboxylic acids and diols derived from optically active amino alcohols

Polycondensations of dicarboxylic acids with diols having amide moieties derived from optically active amino alcohols were carried out. Polymers with M _ns 8,700–17,400 were obtained by the polycondensations using 1.2 eq. of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC·HCl) in DMF at room temperature for 8 h in satisfactory yields. The T_g of the polymer rose with decrease of the methylene chain length of the dicarboxylic acid. In the T_gs of the polymers from L-leucinol, even-odd effect was observed with increase of the methylene chain length of the dicarboxylic acid. The molecular rotation values of the polymers were constant except for the polymer from succinic acid, which showed the negatively largest one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2925–2934, 1997     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(benzobisthiazole)s derived from halogenated phthalic acid and isophthalic acid

Poly(benzobisthiazole)s containing tetrafluorophenyl and bromophenyl moieties were synthesized via the polycondensation of 2,5‐diamino‐1,4‐benzenedithiol dihydrochloride with tetrafluorophthalic acid and 4‐bromoisophthalic acid under a nitrogen atmosphere. The polymers were characterized by X‐ray diffraction, spectroscopy (infrared and solid‐state ¹³C NMR), and thermal analysis, including differential scanning calorimetry and thermogravimetric analysis. The thermogravimetric analysis showed that the thermal stability of the polymers was 490–515 °C under a nitrogen atmosphere. The synthesized polymers showed good solubility in organic solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3959–3966, 2002     

Metabolic profiles and pharmacokinetics of goitrin in rats through liquid chromatography combined with electrospray ionization–tandem mass spectrometry

Several chemical and biological studies have revealed R,S‐goitrin as the main bioactive constituent of Isatis indigotica Fort., responsible for antiviral antiendotoxin activity; however, few pharmacokinetic studies have been conducted. To comprehend the kinetics of R,S‐goitrin and promote its curative application, a rapid and sensitive UHPLC–MS/MS method was developed. The selected reaction monitoring transitions were m/z 130.0 → 70.0 for R,S‐goitrin and m/z 181.1 → 124.0 for the internal standard in a positive‐ion mode. The established UHPLC–MS/MS method achieved good linearity for R,S‐goitrin at 10–2000 ng/mL. The intra‐ and interday accuracy levels were within ±9.7%, whereas the intraday and interday precision levels were <11.3%. The extraction recovery, stability and matrix effect were within acceptable limits. The validated method was successfully applied for the pharmacokinetic analysis of R,S‐goitrin in rats after oral administration. Moreover, a total of six metabolites were structurally identified through UHPLC–Q/TOF–MS. The proposed metabolic pathways of R,S‐goitrin in rats involve demethylation, acetylation, glutathionylation and oxygenation.     

Synthesis of an axially chiral Ir–NHC complex derived from BINAM

The Ir–NHC complex 6 was successfully synthesized from the reaction of axially chiral binaphthyl dibenzimidazolium salt 5 with [Ir(COD)Cl]₂ (COD = 1,5‐cyclooctadiene) in tetrahydrofuran in the presence of KO^tBu base under reflux. Its unique crystal structure is unambiguously disclosed by X‐ray diffraction. Complex 6 is orthorhombic, with space group P2₁2₁2₁, unit cell dimensions a = 12.1406(16) Å, b = 19.110(3) Å, c = 20.312(3) Å, α = β = γ = 90° and volume 4712.6(11) ų, Z = 4, D_calc = 1.930 Mg m^?3. Copyright © 2004 John Wiley & Sons, Ltd.