Difference in photochemical behavior in 3,6‐ and 2,5‐di‐tert‐butyl‐3H‐azepine: The first photochemical bond formation between 2‐ and 6‐position of 3H‐azepine ring

Different photochemical behavior between 3,6‐ and 2,5‐di‐t‐butyl‐3H‐azepine was observed. The former gave wavelength dependent products 3,5‐di‐t‐butylpyridine on irradiation through Pyrex filter via photolysis and 4,7‐di‐t‐butyl‐2‐azabicyclo[3.2.0]hepta‐2,6‐diene on irradiation through quartz filter via photo‐isomerization. Meanwhile, 2,5‐di‐t‐butyl derivative gave exclusively a labile 2,5‐di‐t‐butyl‐6‐azabicyclo‐[3.2.0]hepta‐2,6‐diene on irradiation through Pyrex filter via hitherto unknown photoisomerization mode of the bond formation between 2‐ and 6‐position of the ring.     

Isomerization polymerization of alkyl glycidyl carbonates to produce novel poly(orthocarbonate)s

The isomerization polymerization of three alkyl glycidyl carbonates (4), i.e., glycidyl methyl carbonate (4a), ethyl glycidyl carbonate (4b), and glycidyl propyl carbonate (4c), catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide) (3) to afford novel poly(orthocarbonate)s, poly[(2‐alkoxy‐1,3‐dioxolane‐2,4‐diyl)oxymethylene]s (5a–c), is described. The polymerization proceeded best at around room temperature and gave 5 having several thousands of M_n. As the alkoxy chain of 4 was lengthened, the polymer yield decreased, while the polymer molecular weight increased. The yields of 5b and 5c, however, were improved by increasing the feed ratio of 3 to 4 from 0.04 to 0.10. The reactivity of 4 was discussed in relation to that of glycidyl alkanoates (1). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 445–453, 1999 (See graphics.)     

Glycoconjugated polymer: Synthesis and characterization of poly(vinyl saccharide)‐block‐polystyrene‐block‐poly(vinyl saccharide) as an amphiphilic ABA triblock copolymer

Styrene (St) was polymerized with α,α′‐bis(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)‐1,4‐diethylbenzene ( 1 ) as an initiator (bulk, [St]/] 1 ] = 570) at 120 °C for 5.0 h to obtain polystyrene having 2,2,6,6‐tetramethylpiperidiloxy moieties on both sides of the chain ends ( 2 ) with a number‐average molecular weight (M_n) of 14,300 and a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.14. 4‐Vinylbenzyl glucoside peracetate ( 3a ) was polymerized with 2 as a macromolecular initiator and dicumyl peroxide (DCP) as an accelerator in chlorobenzene at 120 °C. The polymerization with the [ 3a ]/[ 2 ]/[DCP] ratio of 30/1/1.2 for 5 h afforded a product in a yield of 73%; it was followed by purification with preparative size exclusion chromatography to provide the ABA triblock copolymer containing the pendant acetyl glucose on both sides of the chain ends ( 4a ; M_n = 21,000, M_w/M_n = 1.16). Similarly, the polymerization of 4‐vinylbenzyl maltohexaoside peracetate produced the ABA triblock copolymer containing the pendant acetyl maltohexaose on both side of the chain end ( 4b ; M_n = 31,800, M_w/M_n = 1.11). Polymers 4a and 4b were modified by deacetylation into amphiphilic ABA triblock copolymers containing the pendant glucose and maltohexaose as hydrophilic segment, 5a and 5b , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3978–3985, 2006     

Polymerization of (p‐vinylphenyl)hydrogalvinoxyl and formation of a stable polyradical derivative

4‐[(3,5‐Di‐tert‐butyl‐4‐hydroxyphenyl)(3,5‐di‐tert‐butyl‐4‐oxo‐cyclohexa‐ 2,5‐dienylidene)methyl]styrene (abbreviated as (p‐vinylphenyl)hydrogalvinoxyl) was polymerized using AIBN as an initiator to give a bright yellow polymer with M w = 3.2 × 10⁴. The polymer was oxidized to give the corresponding polyradical derivative, whose spin concentration could be increased up to about 70 mol % depending on oxidative conditions. ESR signal line‐width in the solid state was greatly increased below 200 K for the polyradical with a high spin concentration (> 50 mol %). The magnetization and magnetic susceptibility indicated weak antiferromagnetic interaction among the radical sites. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 189–198, 1999     

Magnesium complexes incorporated by sulfonate phenoxide ligands as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and trimethylene carbonate

Two novel sulfonate phenol ligands—3,3′‐di‐tert‐butyl‐2′‐hydroxy‐5,5′,6,6′‐tetramethyl‐biphenyl‐2‐yl 4‐X‐benzenesulfonate (X?CF₃, L^CF3 ‐H, and X?OCH₃, L^OMe ‐H)—were prepared through the sulfonylation of 3,3′‐di‐tert‐butyl‐5,5′,6,6′‐tetramethylbiphenyl‐2,2′‐diol with the corresponding 4‐substituted benzenesulfonyl chloride (1 equiv.) in the presence of excess triethylamine. Magnesium (Mg) complexes supported by sulfonate phenoxide ligands were synthesized and characterized structurally. The reaction of MgⁿBu₂ with L‐H (2 equiv.) produces the four‐coordinated monomeric complexes ( L^CF3 )₂Mg ( 1 ) and ( L^OMe )₂Mg ( 2 ). Complexes 1 and 2 are efficient catalysts for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and trimethylene carbonate (TMC) in the presence of 9‐anthracenemethanol; complex 1 catalyzes the polymerization of ε‐CL and TMC in a controlled manner, yielding polymers with the expected molecular weights and narrow polydispersity indices (PDIs). In ε‐CL polymerization, the activity of complex 1 is greater than that of complex 2 , likely because of the greater Lewis acidity of Mg²⁺ metal caused by the electron‐withdrawing substitute trifluoromethyl (? CF₃) at the 4‐position of the benzenesulfonate group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3564–3572, 2010     

Poly(aryl ether)s containing o‐terphenyl subunits. III. Random copoly(ether imide)s

The synthesis of a new diamine monomer, N‐n‐butyl 3,12‐diamino‐5,6,9,10‐tetrahydro[5]helicene‐7,8‐dicarboxylic imide (4), that contains a helically locked, U‐shaped 4′,4″‐o‐terphenyl moiety is described. The monomer was polymerized with 3,3′,4,4′‐oxydiphthalic dianhydride and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane to form a series of copoly(ether imide)s (5a–e). The incorporation of 4 into the poly(ether imide)s varied the glass‐transition temperature of the copolymers of which it was a part. There was a tendency to form macrocyclic materials at higher molar percentages of 4 during polymerization. The fluorescence of all the copoly(ether imide)s gradually decreased as the content derived from monomer 4 increased in the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 758–763, 2000     

On the Reaction of Thiazole‐2,4‐diamines with Isothiocyanates – Preparation and Transformation of 2,4‐Diaminothiazole‐5‐carbothioamides

In the reaction of thiazole‐2,4‐diamines 8 with isothiocyanates 1 , 2,4‐diaminothiazole‐5‐carbothioamides 9, 10, 18 , and 19 as well as thiazolo[4,5‐d]pyrimidine‐7(6H)‐thiones 21 were formed. The carbothioamides 9, 10 , and 18 were transformed by reaction with different types of monofunctional and bifunctional electrophiles into hitherto unknown acceptor‐substituted 4,4′‐([2,5′‐bithiazole]‐2′,4′‐diyl)bis[morpholines] 24 and 29 , the 2′,4′‐bis(dialkylamino)[2,5′‐bithiazol]‐4‐(5H)‐ones 30 , and the 4‐substituted 2′,4′‐bis(dialkylamino)‐2,5′‐bithiazoles 31 . From 30 and 31 new 4‐mono‐ or 4,5‐disubstituted 2′,4′‐bis(dialkylamino)‐2,5′‐bithiazoles 34, 35, 38 , and 39 as well as 5‐substituted 2′,4′‐bis(dialkylamino)[2,5′‐bithiazol]‐4(5H)‐ones 33, 36 , and 37 were prepared.     

Synthesis,surface properties,and morphologies of poly[methyl(3,3,3‐trifluoropropyl)siloxane]‐b‐polystyrene‐b‐poly(tert‐butyl acrylate) triblock copolymers by a combination of anionic ROP and ATRP

A series of well‐defined poly[methyl(3,3,3‐trifluoropropyl)siloxane]‐b‐polystyrene‐b‐poly(tert‐butyl acrylate) (PMTFPS‐b‐PS‐b‐PtBA) triblock copolymers were prepared by a combination of anionic ring‐opening polymerization of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃), and atom transfer radical polymerization (ATRP) of styrene (St) and tert‐butyl acrylate (tBA), using the obtained α‐bromoisobutyryl‐terminal PMTFPS (PMTFPS‐Br) as the macroinitiators. The ATRP of St from PMTFPS‐Br, as well as the ATRP of tBA from the obtained PMTFPS‐b‐PS‐Br macroinitiators, has typical characteristic of controlled/living polymerization. The results of contact angle measurements for the films of PMTFPS‐b‐PS‐b‐PtBA triblock copolymers demonstrate that the compositions have an effect on the wetting behavior of the copolymer films. For the copolymer films with different compositions, there may be different macroscale or nanoscale structures on the outmost layer of the copolymer surfaces. The films with high content of PtBA blocks exhibit almost no ordered microstructures on the outmost layer of the copolymer surfaces, even though they have microphase‐separated structures in bulk. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a π‐conjugated hybrid of oligothiophene and porphyrin

5‐(3‐Thienyl)‐10,15,20‐triethyl‐21H,23H‐porphine (H₂(ttep)) was synthesized and characterized. Oxidative polymerization of H₂(ttep) gave a novel oligomeric porphyrin linked at the 2,5‐positions of the thienyl group. Electric conductivity of 4 × 10^?1 S/cm after I₂ doping indicated that the oligomer had a π‐conjugated structure with a delocalization of π electrons over the thienylene backbone. PM3 calculations revealed a low HOCO‐LUCO gap, which was consistent with the relatively high electric conductivity. Regioregular (head‐to‐tail) structure was inferred from spectroscopic and calculational results. The pendant porphyrin groups formed a regular J‐type array along the thienylene backbone, which was indicated by a significant red shift of the Soret band maximum. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5403–5412, 2006     

Molecular orientation and composition at the surface of spin‐coated polyfluorene:Fullerene blend films

The surface composition in spin‐coated films of polyfluorene:fullerene blends was determined quantitatively by near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy. By comparing partial and total electron yield spectra, we found vertical compositional differences in the surface region. Furthermore, the orientation of the polymer chains was investigated by variable‐angle NEXAFS. Blend films of poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole] with [6,6]‐phenyl‐C61‐butyric acid methyl ester in two different blend ratios were studied. Results showed polymer enrichment of the surfaces for films with a polymer:fullerene weight ratio of 20:80 and of 50:50, spin‐coated from both chlorobenzene and chloroform solutions. The angular dependence of the NEXAFS spectra of the pure polymer films showed a preferential plane‐on orientation, which was slightly stronger in the subsurface region than at the surface. In blend films, this orientational preference was less pronounced and the difference between surface and subsurface vanished. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Three New Arylnaphthalide Lignans from the Aerial Parts of Bupleurum marginatum Wall. ex DC.

Three new arylnaphthalide lignans, 5‐(4‐hydroxy‐3‐methoxyphenyl)furo[3′,4′: 6,7]naphtho[2,3‐d]‐1,3‐dioxol‐6(8H)‐one ( 1 ), 10‐(4‐hydroxy‐3‐methoxyphenyl)furo[3′,4′: 6,7]naphtho[1,2‐d]‐1,3‐dioxol‐9(7H)‐one ( 2 ), and 10‐(3,4‐dimethoxyphenyl)‐6‐hydroxyfuro[3′,4′: 6,7]naphtho[1,2‐d]‐1,3‐dioxol‐9(7H)‐one ( 3 ), together with two known ones, chinensin ( 4 ) and isodiphyllin ( 5 ), were isolated from the aerial parts of Bupleurum marginatum Wall . ex DC. The structures of the three new lignans were established by means of NMR spectroscopic studies, including HQSC, HMBC, and ROESY.     

Three structures of dispirooxindole derivatives generated in situ through a three‐component one‐pot strategy with complete regio‐ and stereoselectivity

The challenging molecular architecture of spirooxindoles is appealing to chemists because it evokes novel synthetic strategies that address configurational demands and provides platforms for further reaction development. The [3+2] cycloaddition of the carbonyl ylide with arylideneoxindole via a five‐membered cyclic transition state gave a novel class of dispirooxindole derivatives, namely tert‐butyl 4′‐(4‐bromophenyl)‐1′′‐methyl‐2,2′′‐dioxo‐5′‐phenyl‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐1‐carboxylate, C₃₆H₃₁BrN₂O, (Ia), 5′‐(4‐bromophenyl)‐1,1′′‐dimethyl‐4′‐phenyl‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐2,2′′‐dione, C₃₂H₂₅BrN₂O₃, (Ib), and tert‐butyl 1′′‐methyl‐2,2′′‐dioxo‐4′‐phenyl‐5′‐(p‐tolyl)‐4′,5′‐dihydrodispiro[indoline‐3,2′‐furan‐3′,3′′‐indoline]‐1‐carboxylate, C₃₇H₃₄N₂O₅, (Ic). Crystal structure analyses of these dispirooxindoles revealed the formation of two diastereoisomers selectively and confirmed their relative stereochemistry (SSSR and RRRS). In all three structures, intramolecular C—H...O and π–π interactions between oxindole and dihydrofuran rings are the key factors governing the regio‐ and stereoselectivity, and in the absence of conventional hydrogen bonds, their crystal packings are strengthened by intermolecular C—H...π interactions.     

Photovoltaic performance enhancement using fluorene‐based copolymers containing pyrene units

A set of novel conjugated polyfluorene co‐ polymers, poly[(9,9′‐didecylfluorene‐2,7‐diyl)‐co‐(4,7′‐di‐2‐thienyl‐ 2′,1′,3′‐benzothiadiazole‐5,5‐diyl)‐co‐(pyrene‐1,6‐diyl)], are synthesized via Pd(II)‐mediated polymerization from 2,7‐bis(4′,4′,5′, 5′‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9,9′‐di‐n‐decylfluorene, 4, 7‐di(2‐bromothien‐5‐yl)‐2,1,3‐benzothiadiazole, and 1,6‐dibromopyrene with a variety of monomer molar ratios. The field‐effect carrier mobilities and optical, electrochemical, and photovoltaic properties of the copolymers are systematically investigated. The hole mobilities of the copolymers are found to be in the range 7.0 × 10^?5 ? 8.0 × 10^?4 cm² V^?1 s^?1 and the on/off ratios were 8 × 10³ ? 7 × 10⁴. Conventional polymer solar cells (PSCs) with the configuration ITO/PEDOT:PSS/polymer:PC₇₁BM/LiF/Al are fabricated. Under optimized conditions, the polymers display power conversion efficiencies (PCEs) for the PSCs in the range 1.99–3.37% under AM 1.5 illumination (100 mW cm^?2). Among the four copolymers, P2, containing a 2.5 mol % pyrene component incorporated into poly[9,9′‐didecylfluorene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PFDTBT) displays a PCE of 3.37% with a short circuit current of 9.15 mA cm^?2, an open circuit voltage of 0.86 V, and a fill factor of 0.43, under AM 1.5 illumination (100 mW cm^?2). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A new terpyridine tethered polythiophene: Electrosynthesis and characterization

A novel polythiophene bearing a pendant terpyridine moiety has been synthesized by electrochemical polymerization of a new thiophene monomer, namely 4′‐(2,2′:5′,2″‐terthien‐3′‐ethynyl)‐2,2′:6′,2″‐terpyridine (TAT). The insertion of a conjugated ethynyl spacer between the terthiophene and the terpyridine fragments provides for an effective extension of the delocalization of electrons within the structural unit and the polymer as a whole. The synthesis and characterization of the relevant monomer, the electrosynthesis of the corresponding polymer and its electrochemical, UV–visible spectroelectrochemical and IR characterization are described. Finally, a comparison between the electrochemical, spectroscopic, and spectroelectrochemical properties of PTAT and the analogue, saturated‐spacer PTTT (TTT = 4′‐[(2,2′:5′,2″‐terthien‐3′‐yl)methoxy]‐2,2′:6′,2″‐terpyridine) polymer is discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Synthesis and Reactions of the Novel 6‐ethyl‐4‐hydroxy‐2,5‐dioxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carboxaldehyde

The novel 6‐ethyl‐4‐hydroxy‐2,5‐dioxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carboxaldehyde ( 2 ) was efficiently synthesized from Vilsmeier–Haack formylation of 3‐(1‐ethy1‐4‐hydroxy‐2‐oxo‐(1H)‐quinolin‐3‐yl)‐3‐oxopropanoic acid ( 1 ). The aldehyde 2 was allowed to react with some nitrogen nucleophiles producing a variety of hydrazones 3 – 7 . Reaction of aldehyde 2 with hydrazine hydrate and hydroxylamine hydrochloride afforded pyrazole and isoxazole annulated pyrano[3,2‐c]quinoline‐2,5(6H)‐dione, respectively. The reactivity of aldehyde 2 was examined toward some active methylene nitrile, namely, malononitrile, ethyl cyanoacetate, and cyanoacetamide leading to 2‐iminopyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines 10 – 12 , respectively. Also, some novel pyrazolo[4″,3″:5′,6′]pyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines ( 13 , 14 ) and thiazolo[5″,4″:5′,6′]pyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines ( 15 , 16 ) were synthesized. Structures of the new synthesized products were deduced on the basis of their analytical and spectral data.     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Copolymers of 2,5‐bis[(4‐methoxyphenyl) oxycarbonyl]styrene with n‐butyl acrylate: Design,synthesis, and characterization

A series of rod–coil diblock copolymers, consisting of poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} as a rigid segment and poly(n‐butyl acrylate) as a flexible part, were successfully prepared through two inverse procedures by atom transfer radical polymerization. The copolymers were characterized by ¹H NMR and gel permeation chromatography and had high molecular weights and relatively narrow polydispersities (polydispersity index < 1.20). All the block copolymers synthesized had two distinct glass‐transition temperatures according to differential scanning calorimetry. A polarizing optical microscopy investigation demonstrated the liquid crystallinity of the diblock copolymers. The self‐assembly behaviors in dilute solutions was studied by transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5935–5943, 2005     

Synthesis and characterization of highly fluorescent polythiophene derivatives containing polystyrene sidearms

In this study, macroinitiators with different content of atom‐transfer radical polymerization (ATRP) functional group on polythiophene backbone were first prepared by the copolymerization of 3‐[1‐ethyl‐2‐(2‐bromopropionate)]thiophene and 3‐hexylthiophene with various feed ratio. Then poly [3‐hexyl‐2,5‐thienylene‐co‐3‐[1‐ ethyl‐2‐(2‐[poly(styrene)]propionate)]‐2,5‐thienylene] (PTTBr‐PS) with different graft density were obtained by ATRP of styrene from these macroinitiators in anisole. The degree of polymerization of PS sidearm (DP_PS) was controlled by polymerization time. The structures of obtained graft copolymers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (¹H NMR) and differential scanning calorimetry (DSC). Introduction of the PS sidearms onto the backbone of polythiophene was an attempt to trap the polythiophene backbone in a “solution‐like” conformation, thus inhibit the packing of polythiophene backbone and result in the improvement of fluorescent property in solid state. This was verified by the UV–vis and fluorescence analyses. Besides, it was also found that the optical property of PTTBr‐PS graft copolymer was dominated by its graft density and independent on the degree of polymerization of its PS sidearm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1003–1013, 2008     

Cyclodextrins in polymer synthesis: free radical polymerization of cyclodextrin complexes with oxazoline‐functionalized vinyl monomers as guest molecules in aqueous medium

The synthesis of five new oxazoline functionalized vinyl monomers N‐[4‐(4′,5′‐dihydrooxazol‐2‐yl)phenyl]acrylamide ( 3 a ), N‐[4‐(4′,5′‐dihydrooxazol‐2‐yl)phenyl]‐2‐methylacrylamide ( 3 b ), N‐{10‐[4‐(4′,5′‐dihydrooxazol‐2‐yl)phenylcarbamoyl]decyl}‐2‐acrylamide ( 5 a ), N‐{10‐[4‐(4′,5′‐dihydrooxazol‐2‐yl)phenylcarbamoyl]decyl}‐2‐methylacrylamide ( 5 b ) and N‐[4‐(4′,5′‐dihydrooxazol‐2‐yl)‐phenyl]‐4‐vinylbenzamide ( 7 ) is described. With an equimolar amount of 2,6‐dimethyl‐β‐cyclodextrin (DMCD) these monomers formed hydrophilic inclusion complexes 3 a,b‐DMCD , 5 a,b‐DMCD and 7‐DMCD . These complexes were polymerized radically in an aqueous medium. Resulting polymers P‐(3 a, b) , P‐(5 a, b) and P‐(7) precipitated during the polymerization due to unthreading of the cyclodextrin from the growing polymer chain. The remaining oxazoline moiety offers possibilities of further modification of the polymers, e. g. grafting in a cationic ring opening polymerization with commercially available alkyloxazolines.