Self‐Initiated Photopolymerization and Photografting of Acrylic Monomers

Summary: This work demonstrates that acrylic acid (AA), glycidyl acrylate (GA) and several other acrylic monomers can be photopolymerized and photografted onto high‐density polyethylene (HDPE) by self‐initiation. The self‐initiation mechanism of these acrylic monomers is possibly by an excitation of the monomer to a triplet state (T₃) with enough energy to abstract hydrogen from the polymer substrate and initiate the grafting.

Grafting conversion of acrylic acid (AA), methacrylic acid (MAA), 2‐hydroxyethyl acrylate (HEA), glycidyl acrylate (GA), 2‐hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methacrylate (PEGMA) as a function of irradiation time.     

Cyanoxyl‐mediated free‐radical polymerization of acrylic acid: Its scope and limitations

This work examines the scope and limitations of the cyanoxyl (^·OC?N)‐mediated free‐radical polymerization of acrylic acid (AA) with respect to the criteria of livingness. Cyanoxyl persistent radicals were generated in situ through the reaction between arenediazonium salts (X? C₆H₄N?N^⊕BF, where X is H, OCH₃, Cl, or NO₂) and sodium cyanate (NaOCN). This article thoroughly discusses the role played by such oxygen‐centered radicals in the polymerization process; it particularly focuses on the influence of the concentration and nature of the diazonium salt, the solvent, and the temperature on features such as the variations of ln([M]₀/[M]) versus time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration), the number‐average molar mass versus conversion, and the polydispersity versus conversion in cyanoxyl‐mediated free‐radical polymerizations of AA. Cyanoxyl‐terminated samples were used as macroinitiators for the polymerization of methyl methacrylate to generate poly(acrylic acid)‐b‐poly(methyl methacrylate) block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 519–533, 2005     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

Kinetics and mechanism of emulsifier-free emulsion copolymerization: Styrene-methyl methacrylate-acrylic acid system

The emulsifier-free emulsion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presence of functional monomer acrylic acid (AA) was carried out in batch process. The kinetics was investigated in detail using model function, Integrated Gamma Function. The morphology and size of particles were monitored continuously by TEM all along the polymerization. It was found that the nucleation, polymerization rate increase with increasing concentration of the functional monomer AA, initiator ammonium persulfate (APS), and polymerization temperature T, and APS plays a predominant role in the particle nucleation process. The particle nucleation stage ceased at about 10% conversion and the steady stage can be extended to about 70% conversion. The particle nucleation is likely to yield primary particle via the mechanism of homogeneous coagulative nucleation and coagulation of the primary particle to yield uniform particles. The particle growth in the postnucleation stage is via a shell growth mechanism. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2649–2656, 1999     

Silicone‐based impact modifiers for poly(vinyl chloride), engineering resins,and blends

Silicone‐based impact modifiers were prepared in a previous study. The modifiers were composed of silicone/acrylic rubber cores and grafted acrylic shells. They improved the toughness of poly(vinyl chloride) (PVC) and poly(methyl methacrylate). The silicone emulsion that was used to produce the silicone‐based impact modifiers was prepared via two routes: emulsion polymerization and bulk polymerization of octamethyltetracyclosiloxane. Many silicone‐based impact modifiers were produced that had different silicone/acrylic rubber characteristics. Through a toughness examination of modified PVC, the best composition of the silicone‐based impact modifiers was obtained, and the silicone content in the rubber composition was 25 wt %. The morphology of the silicone‐based impact modifiers, determined by transmission electron microscopy, was as follows: core and second shell polymers were mainly poly(butyl acrylate), and the first shell polymer was silicone. The silicone‐based impact modifiers were blended with engineering resins such as PVC, polycarbonate (PC), poly(butylene terephthalate) (PBT), and PC/PBT mixtures. The impact strength under standard conditions and after weathering test conditions for blends of the silicone‐based impact modifiers were investigated with respect to two commercially available acrylic and methyl methacrylate/butadiene/styrene impact modifiers. The results showed good weatherability and good toughness under low‐temperature conditions for the silicone‐based impact modifiers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1112–1119, 2004     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Restraining the aggregation of photoluminescent 1‐pyrenecarboxylic acid by hydrogen bonding to poly(methyl methacrylate)

Hydrogen bonds between the carboxylic acid in photoluminescent 1‐pyrenecarboxylic acid (PCA) and the ester carbonyl group in poly(methyl methacrylate) (PMMA) can be used to restrain the aggregation of the fluorescent PCA molecules and to enhance the emission efficiency of the resulting PMMA/PCA films. Primarily, PCA is added to PMMA in THF (or in toluene) to make homogeneous mother solutions for the further preparation of solid PMMA/PCA films. The concentration and chain conformation of PMMA in the mother solution are crucial to controlling the dispersion of PCAs in solution and, therefore, the extent of aggregation in the so‐derived films. The results from solution emissions suggest that PCAs in dilute solutions are easy to disperse, and less PMMA is required for the effective exclusion of aggregation in comparison with PCAs in concentrated solutions. In addition, the solvents THF and toluene play different roles in the arrangement of the PMMA chains and the emission behavior of the incorporated PCA in the dilute and semidilute regimes. With appropriate solution preparation conditions, the resulting films have photoluminescence quantum efficiencies ranging from 0.83 to 0.93, and the best value of 0.93 has been obtained from a film containing a small PCA content of 0.24 wt %. This result indicates that the fluorophore arrangements, rather than the content, govern the final emission efficiency. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 920–929, 2007     

Triplet energy transfer to polymer matrices—I. Transfer at 77 K in a series of copolymers

The life-time of phosphorescence emission from triphenylene and coronene suspended in a range of styrene/methyl methacrylate copolymers has been measured at 77 K. It has been concluded that the polymer matrix quenches the triplet state of the polycyclic aromatics, presumably by an energy transfer mechanism.     

Radiation‐induced fabrication of polymer nanoporous materials from microphase‐separated structure of diblock copolymers as a template

Polymer nanoporous materials with periodic cylindrical holes were fabricated from microphase‐separated structure of diblock copolymers consisting of a radiation‐crosslinking polymer and a radiation‐degrading polymer through simultaneous crosslinking and degradation by γ‐irradiation. A polybutadiene‐block‐poly(methyl methacrylate) (PB‐b‐PMMA) diblock copolymer film that self‐assembles into hexagonally packed poly(methyl methacrylate) cylinders in polybutadiene matrix was irradiated with γ‐rays. Solubility test, IR spectroscopy, and TEM and SEM observations for this copolymer film in comparison with a polystyrene‐block‐poly(methyl methacrylate) diblock copolymer film revealed that poly(methyl methacrylate) domains were removed by γ‐irradiation and succeeding solvent washing to form cylindrical holes within polybutadiene matrix, which was rigidified by radiation crosslinking. Thus, it was demonstrated that nanoporous materials can be prepared by γ‐irradiation, maintaining the original structure of PB‐b‐PMMA diblock copolymer film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5916–5922, 2007     

A thioxanthone‐based visible photoinitiator

Thioxanthone‐based 9‐(2‐Morpholine‐4yl‐acetyl)‐5‐thia‐napthasen‐12‐one (TX‐MPM) was synthesized and characterized as a one‐component novel visible photoinitiator. Its capability to act as an initiator for the polymerization of methyl methacrylate (MMA) was examined in photoreactor and also daylight. Photophysical properties: fluorescence and phosphorescence emission spectra and fluorescence quantum yield of TX‐MPM (?_f = 0.29) were determined. The phosphorescence lifetime was found 131 ms for TX‐MPM and 110 ms for initiator‐attached polymer (PMMA) at 77 K, indicated a π→π* nature of the lowest triplet state. A model compound, morpholino acetonapthone was used as quencher for the triplet states of TX‐MPM and the quenching rate constant was determined (k_q = 1.26 × 10⁹ M^?1s^?1). According to laser flash photolysis studies, intermolecular hydrogen abstraction process was more dominant path to the formation of the initiating radicals. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Release of theophylline and aminophylline from acrylic acid/n‐alkyl methacrylate hydrogels

The swelling capacity and release rate of two homologous drugs, theophylline and aminophylline, from acrylic acid/n‐alkyl methacrylate hydrogels have been studied. The maximum equilibrium swelling increases as the molar fraction of acrylic acid or the chain length of the methacrylate in the hydrogels increases. Water diffusion to the hydrogels is non‐Fickian. Both drugs are released from the fully swollen hydrogels according to Fick's law. However, the drug release from xerogels deviates from Fick's law, especially for aminophylline. As expected because of its larger size, aminophylline diffuses more slowly than theophylline under similar experimental conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2756–2765, 2004     

Reversible gelation of poly(dimethylsiloxane) with ionic and hydrogen‐bonding substituents

Poly(dimethylsiloxane) copolymers containing a small fraction of carboxylic acid or Zn‐carboxylate groups were prepared and compared regarding reversible gelation by hydrogen‐bonding and ion‐pair interaction. The polymers were synthesized by condensation of a t‐butylcarboxylate functionalized dichlorosilane with an α,ω‐dihydroxy‐poly(dimethylsiloxane), followed by thermal cleavage of the ester bond. Neutralization of the resulting carboxylic acid substituents was achieved by addition of Zn (acac)₂. Reversible crosslinking was investigated by step stress and oscillating shear experiments. The carboxylic acid containing poly(dimethylsiloxane) became rubberlike upon increasing the temperature and liquified again when it was brought back to room temperature. This observation has been explained tentatively by segregation of the carboxylic acid groups into polar domains at high temperatures [i.e., a behavior like it is observed for systems with a lower critical solution temperature (LCST)]. At ambient temperature, the carboxylic acid groups undergo hydrogen bonding to the Si–O–Si backbone. Clustering of the carboxylic acid groups occurs only as these hydrogen bonds break upon raising temperature. Moisture was found to have a strong influence on the reversal of the crosslinking. Addition of zinc acetylacetonate resulted in the formation of an elastic network already at ambient conditions consistent with the concept of ionomers which undergo reversible gelation by formation of ion‐pair multiplets and clusters in the hydrophobic polymer matrix in particularly at low temperatures. At high temperature, both the carboxylic acid and the carboxylate sample exhibited a rather similar viscoelastic behavior consistent with a common structure where transient crosslinks are formed by clusters of the carboxylic acid and the carboxylate groups. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 485–495, 1999     

Morphology of epoxy/acrylic polymer‐dispersed liquid‐crystal film in DICY thermal cure

A polymer‐dispersed liquid‐crystal (PDLC) film was prepared from UV‐curable acrylic, thermally curable epoxy, and a liquid‐crystal (LC) mixture with a fixed LC content of 40 wt %. The UV irradiation and heat treatments were in sequential steps. At first, a phase diagram of a binary mixture of LC (E63) and epoxy [diglycidyl ether of polypropylene glycol (DER736)] was established to understand their miscibility. Then, the phase‐separation temperatures and morphologies of pre‐UV‐cured films with different equivalent DER736/dicyandiamide (DICY) molar ratios were observed. Finally, the polymerization‐induced phase‐separation behavior and morphology of the PDLC film were studied by real‐time observation while the film was maintained at 130 °C under the microscope. The results showed that the acrylic network would not affect the phase‐separation behavior of the E63/DER736 mixture. In both thermally induced and polymerization‐induced phase separations, the undissolved DICY particles acted as nucleation agents and were capable of inducing E63 to separate out early. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2033–2042, 2000     

Grafting of light‐activated antimicrobial materials to nylon films

Protoporphyrin IX and zinc protoporphyrin IX were grafted to the surface of nylon‐6,6 films via an ethylene diamine bridge and a poly(acrylic acid) (PAA) scaffold. X‐ray photoelectron spectroscopy showed that approximately 57% of the nylon surface was covered by PAA and approximately 6% of the carboxylic acid groups in PAA were grafted to the ethylene diamine derivative of protoporphyrin IX or its zinc salt. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 41–47, 2003     

Amphiphilic conetworks. IV. Poly(methacrylic acid)‐l‐polyisobutylene and poly(acrylic acid)‐l‐polyisobutylene based hydrogels prepared by two‐step polymer procedure. New pH responsive conetworks

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(methacrylic acid) (PMAA) or poly(acrylic acid) (PAA) and hydrophobic polyisobutylene (PIB) chains. These conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene (IB) and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB–IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four methacrylic groups per chain, was copolymerized with methacrylic acid (MAA) or acrylic acid (AA) by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 31–79 mol % of MAA or 26–36 mol % of AA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proven by swelling in both aqueous media with low and high pH and n‐heptane. The effect of varying pH on the swelling behavior of the synthesized conetworks is presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1284–1291, 2009     

Complexation of copper(II) ions with imidazole–carboxylic polymeric systems

The interaction of two polyampholyte systems, poly(1‐vinylimidazole‐co‐acrylic acid) and interpolymer complex poly(acrylic acid)/poly(1‐vinylimidazole) with copper(II) ions in water, was examined with potentiometry (pH‐metry and Cu‐selective electrode) and electron spin‐resonance spectroscopy. Coordination of Cu²⁺ with copolymer proceeded by carboxylic groups, whereas the interpolymer system azole units were also involved in the inner sphere of the complex. Synergism between coordination with metal ions and intramolecular hydrogen or ionic bonds was shown. The interpolymer complex was an effective system for binding, extracting, and concentrating copper ions from water. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2256–2263, 2003     

Intense photoluminescence from mixed solutions of C70 and palladium octaethylporphyrin: A supramolecular heavy atom effect

Unusually intense near-infrared (near-IR) photoluminescence has been observed from mixed solutions of C70 and palladium octaethylporphyrin (PdOEP). The novel emission has a spectrum similar to C70 phosphorescence and an intensity that is approximately 20 times greater than that of C70 fluorescence. The emitting species is identified as a noncovalently bound, short-lived triplet exciplex of C70 with PdOEP. The emission is essentially C70 phosphorescence intensified by spin-orbit coupling from the Pd atom in the nearby metalloporphyrin. This supramolecular heavy atom effect increases the C70 emissive quantum yield to approximately 1 x 10(-2) in degassed hexane solution at room temperature. The radiative rate constant is enhanced by a factor of 10(5), to approximately 7 x 10(4) s(-1), which is a value that exceeds the phosphorescence rate constant of PdOEP. Comparative studies in a rigid poly(methyl methacrylate) (PMMA) matrix show that the excited state of the static C70-PdOEP complex decays in approximately 150 ns. A Job's plot analysis shows that the complex has a 1:1 stoichiometry. It forms dynamically in solution and is relatively weakly bound, with an estimated equilibrium constant near 100 M(-1). Qualitatively similar supramolecular heavy atom effects were also observed for complexes of PdOEP with C60 and fullerene derivatives.     

Influence of aggregation on the phosphorescence of iridium complex in poly(methyl methacrylate) matrix

In this study, novel phosphorescent compound of iridium(III)bis(2,3‐diphenylquinoxaline)2‐(benzoimidazol‐2‐yl)pyridine (IrQB) was prepared and the emission study suggests the solid form of IrQB has less phosphorescence intensity than its solution in tetrahydrofuran (THF). To avoid the potential aggregation of IrQB in the concentrated state, poly(methyl methacrylate) (PMMA) was intentionally added as isolator to make solutions of different concentrations in THF and then solid films of IrQB/PMMA of different compositions after THF removal. Films of IrQB/PMMA prepared from dilute solutions exhibit two emission bands centered at 540 and 640 nm, respectively, which is in contrast to the sole 640‐nm emission band observed for films prepared from semidilute solutions. The 540‐ and 640‐nm bands show progressive variations of the intensity with temperature. Emission band at 540 nm is derived from the polarized optical microscope and is attributed to the IrQB aggregates, whose life‐time indicates it is phosphorescent in nature. This aggregate formation is strongly affected by the applied concentrations of IrQB and PMMA in the preparative solution state. Model to postulate the mechanism of aggregate formation in the solution and the derived film states is thereby presented in this study. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 631–639, 2008     

Thin‐film photovoltaic devices incorporating low‐bandgap push–pull molecules dispersed in passive polymeric matrices

Active layers in many thin‐film organic photovoltaic devices (OPVs) contain light‐absorbing polymers that serve as electron donors, mixed with appropriate electron acceptors. In principle, the polymers can be replaced by small molecules with suitable bandgaps, which offer multiple advantages, including well‐defined structures and methods of synthesis and purification that provide uniform samples. However, such materials often undergo separation of phases and crystallization, so making long‐lived films that remain smooth, homogeneous, flexible, and transparent is not easy. We have found that effective OPVs can be made by dispersing mixtures of low‐bandgap push–pull small molecules as electron donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as electron acceptor in matrices of optoelectronically passive conventional polymers, including polystyrene, poly(methyl methacrylate), poly(vinyl chloride), poly(ethylene glycol), and poly(dimethylsiloxane). By varying the identity of the matrix, its molecular weight, the loading of active components, and the conditions of annealing, we have produced efficient OPVs from components that would otherwise have undergone phase separation and crystallization, leading to poor performance. Layers with up to 35% matrix were found to be effective and could be fabricated at room temperature by simple processes. To probe the role of the polymers as dispersants, morphologies of composite films were examined by atomic force microscopy and electron microscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1479–1492     

Preparation of poly(acrylic acid)‐b‐polystyrene by two‐step atom transfer radical polymerization in supercritical carbon dioxide

It is known that it is difficult to polymerize carboxylic acid‐based monomer by atom transfer radical polymerization (ATRP) in polar solvents due to the protonation of ligand caused by acidic dissociation of the monomer. In this study, precipitation reverse ATRP of acrylic acid (AA) was carried out in supercritical carbon dioxide (scCO₂), which is a nonpolar solvent to dissolve transition metal complexes, at 30 MPa and 45 °C. The polymerization proceeded smoothly and the conversion reached 86% for 3 h. After vending of scCO₂, a dry poly(acrylic acid) (PAA) powder was obtained. Weight‐average molecular weight and polydispersity of the methylated PAA, which were measured by gel‐permeation chromatography after methyl esterification, were 3.5 × 10⁴ and 2.07, respectively, indicating that the precipitation reverse ATRP proceeded with a bad control manner. However, chain extension of the methylated PAA with styrene was possible by ATRP in a bulk system. Moreover, PAA‐b‐polystyrene was successfully prepared in scCO₂ directly by two‐step ATRP, although its molecular weight distribution was broad. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012