Dual monomer grafting of styrene and maleic anhydride onto model hydrocarbon substrates

Styrene and maleic anhydride (MAn) were successfully grafted, alone and simultaneously, onto various model hydrocarbon substrates at 180 °C with 2,5‐dimethyl‐2,5‐di‐(t‐butyl peroxy)hexane (L101) as a free‐radical initiator. Dodecane, 1‐dodecene, and 2,6,10,14‐tetramethylpentadecane were selected as model compounds to investigate the effects of terminal unsaturation and branching on grafting and crosslinking. These compounds were chosen to mimic the aforementioned microstructural characteristics that are commonly observed in polyethylene. The results demonstrate that terminal unsaturation increases the amount of crosslinked material in the presence of L101. With respect to grafting, for the single monomer systems, MAn prefers to graft as single saturated units, whereas styrene prefers to graft as long chains of polystyrene oligomers. However, when both monomers are grafted simultaneously, graft yields are drastically reduced because of a propensity for the two monomers to form a styrene–maleic anhydride copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2456–2468, 2000     

Functionalization of polyesters with maleic anhydride by reactive extrusion

Maleic anhydride (MAn) was grafted onto aliphatic and aromatic/aliphatic copolyesters by reactive extrusion in the presence of a free radical initiator using a twin‐screw extruder. The grafting reaction was confirmed by spectroscopic analyses. The presence of succinic anhydride groups was shown by FT‐IR spectroscopy, and NMR spectra indicate that the grafts consist of single succinic anhydride units. The 2D ¹H‐NMR spectra (COSY) indicate that grafting reactions take place at aliphatic dicarboxylic acid units of copolyesters. The graft content was determined by a nonaqueous titration method. The effects of concentration of initiator and monomer and reaction temperature on the graft content and intrinsic viscosity were studied. The low percentage grafting in poly(lactic acid) was observed due to the presence of limited free radical sites in the polymer backbone. Temperature and monomer and initiator concentrations affect the graft content, and the desired graft content with minimal degradation can be obtained by controlling these factors. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1693–1702, 1999     

Stabilizer‐free dispersion copolymerization of maleic anhydride and vinyl acetate. I. Effects of principal factors on microspheres

A novel dispersion copolymerization of maleic anhydride (MAn) and vinyl acetate (VAc) without adding stabilizer is developed, which gives uniform copolymer microspheres with tunable sizes. Some principal factors affecting the microspheres, such as reaction time, monomer concentration and feed ratio, reaction media, and cosolvent, were investigated. It was found that the stabilizer‐free dispersion copolymerization of MAn and VAc is a rapid process, and the particle size grows in accordance with the evolution of polymerization. The chemical composition of the copolymer microspheres was characterized by FT‐IR and ¹³C NMR spectroscopies. Over a wide range of monomer concentrations, the microspheres can always be formed and stably dispersed, with uniform sizes ranging from 180 nm to 740 nm. The yield of copolymer microspheres reaches a maximum at 1:1 feed ratio of MAn to VAc, owing to the alternating copolymerization between the binary monomers by a known charge‐transfer‐complex mechanism. However, the diameter of microspheres drastically increases when MAn content is enhanced. Only some specific alkyl ester solvents, such as n‐butyl acetate, isobutyl acetate, n‐amyl acetate, are desirably fit for this unique stabilizer‐free dispersion polymerization. Furthermore, we found that when some acetone is added as a cosolvent, the copolymer microspheres can still be formed, with much larger diameters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3760–3770, 2005     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Vinyl monomers bearing chromophore moieties and their polymers. VIII. synthesis and fluorescence behavior of a vinyloxy monomer having an electron‐accepting chromophore moiety,p‐((vinyloxy)methyl)benzonitrile,and its polymers

A vinyloxy monomer having an electron‐accepting chromophore moiety, p‐((vinyloxy)methyl)benzonitrile (VOMBN), was synthesized by reaction of p‐(hydroxymethyl)benzonitrile with ethyl vinyl ether (EVE) in the presence of mercuric acetate. VOMBN can easily be cationically homopolymerized and copolymerized with EVE by using Lewis acids such as boron trifluoride etherate (BF₃ · OEt₂) as a catalyst and radically copolymerized with maleic anhydride (MAn) using AIBN as an initiator. The fluorescence behaviors of VOMBN, its copolymer P(VOMBN‐co‐MAn), and its saturated model compound p‐(ethoxymethyl)benzonitrile (EOMBN) were investigated in acetonitrile. It has been found that the fluorescence intensity of VOMBN is much lower than its copolymer and EOMBN at the same chromophore concentration. A fluorescence “structural self‐quenching effect” (SSQE) is also observed for VOMBN as we have reported previously [Li, F. M.; Chen, S. J.; Li, Z. C.; Qiu, J. J Polym Sci Polym Chem 1996, 34, 1881]. This phenomenon has been attributed to the inter‐ and intramolecular charge transfer interaction between the electron‐accepting cyanophenyl chromophore and the electron‐donating vinyloxy group in the same molecule. The dependence of the fluorescence intensity of VOMBN on solvents of different viscosities is evidence that the SSQE of VOMBN mainly occurs intramolecularly. The fluorescence of EOMBN and P(VOMBN‐co‐MAn) was quenched by a series of electron‐rich vinyloxy compounds which do not have chromophore moieties, such as dihydrofuran (2H‐furan), dihydropyran (2H‐pyran), furan, and EVE. It is observed that the higher the electron‐donating ability of the quenchers, the greater the quenching efficiency. P(VOMBN) and the random copolymers of VOMBN with EVE show broader fluorescence spectra as compared to the alternating copolymer P(VOMBN‐co‐MAn). This indicates that there is a mutual interaction between the adjacent cyanophenyl groups in P(VOMBN) and P(VOMBN‐co‐EVE), whereas such an interaction does not exist for P(VOMBN‐co‐MAn) in which the cyanophenyl groups are isolated by the rigid succinic anhydride rings. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 179–187, 1999     

POLYMERIC ACID FOR THIN FILM APPLICATIONS

ABSTRACT

Propyl and butyl half esters of the alternating copolymer isobutylene/maleic anhydride (IB/MAn) are polymers of high acid content (4.67 and 4.38 milliequivalent acid/g polymer). These polymers exhibit good physical performance in thin films, such as absence of cracking and minimal curl. The anhydride ring of the copolymer IB/MAn is opened in refluxing alcohol at atmospheric or elevated pressure; conversion is monitored by an IR probe (1783 vs. 1733 cm?1). The polymers are stable up to about 50 °C. Weight loss corresponding to the reversion to the anhydride structure is observed at higher temperature, with concurrent increase of anhydride resonances in the IR. Thermal stability of the half esters is similar to that of alkyl half esters of the alternating copolymers ethylene/maleic anhydride (EMA) and methyl vinyl ether/maleic anhydride (Gantrez® AN 119). The 1-propanol solution of the propyl half ester of IB/MAn copolymer is a shear thinning fluid, a significant advantage when coating at high speeds.     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Synthesis of maleic anhydride grafted polyethylene and polypropylene,with controlled molecular structures

This article discusses a new chemical route to prepare maleic anhydride (MA) grafted polyethylene and polypropylene polymers with controlled molecular structure, that is, MA grafted content and polymer molecular weight and composition distributions. The chemistry involves a free radical graft reaction of maleic anhydride with poly(ethylene‐co‐p‐methylstyrene) and poly(propylene‐co‐p‐methylstyrene) copolymers. Under a suspension reaction condition, the grafting reaction takes place selectively on the p‐methylstyrene units in the copolymer, due to high reactivity of p‐methyl group and favorable mixing between p‐methylstyrene units and chemical reagents in the swollen amorphous phases. The resulting polymer shows no detectable molecular weight change during the reaction, and the MA grafted content increases with the increase of initiator and p‐methylstyrene concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1337–1343, 2000     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of polymer nanoparticles from renewable biobased furfuryl alcohol and maleic anhydride by stabilizer‐free dispersion polymerization

The spherical polymer nanoparticles of biobased renewable monomers, furfuryl alcohol (FA) and maleic anhydride (MAn), with diameters (D_n) in the range of 120 to 500 nm have been prepared by stabilizer‐free dispersion copolymerization. In acetate or its mixture, the conversion of the monomers greatly depended on the concentration of AIBN. When the molar ratio of AIBN/monomers was 3.6% (wt), the monomer conversion could be as high as 80%. The aggregations of the solvated polymer chains formed the nuclei of the polymer particles. After the nucleation stage, both the monomer conversions and particle sizes increased steadily, while the coefficient of variation of the particle size decreased. The almost linear relationship between the D_n³ and the weight of polymer suggested that there is no significant secondary nucleation. The copolymer of FA and MAn could not dissolve in common organic solvents. Elemental analyses, FTIR and ¹³CP‐MAS spectra showed that the copolymer was close to the alternative copolymer of FA and MAn irrespective to the molar ratios of FA/MAn in monomer feed. Furthermore, the two 2,5‐ and 3,4‐dihydrofuran ring configurations exist in the copolymer and the later is the major one. The reaction of copolymer particles with triethylenetetramine confirmed the reactivity of the succinic anhydride groups at the surface of copolymer particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stereochemistry of alternating methacryloyl-L-valine methyl ester–maleic anhydride copolymer

The stereochemical composition of an alternating methacryloyl-L -valine methyl estermaleic anhydride (L-MAVM/MAn) copolymer which was prepared by the photocopolymerization of L-MAVM and MAn in dioxane at 25°C without initiator was investigated by proton magnetic resonance spectroscopy. The resonance of the ester methyl protons of the L-MAVM unit appeared as three split peaks at 3.65, 3.76, and 3.82 ppm, which could be assigned to those of the coisotactic (di-threo-tri-isotactic), coheterotactic and cosyndiotactic triads, respectively. The triad cotacticity determined according to these assignments indicated that the copolymer was composed predominantly of di-threo-tri-isotactic triad. Similarly PMR spectroscopic investigation of the acryloyl-L -valine methyl ester–maleic anhydride (L-AVM/MAn) copolymer with a 1:1 molar ratio of the monomers showed that the main tactic fraction of the copolymer was also di-threo-tri-isotactic one. Nevertheless, the circular dichroic investigation of the L-AVM/MAn copolymer before and after hydrolysis denied asymmetric induction into the polymer main chain. These results suggest that the propagation step in the photocopolymerization of L-MAVM or L-AVM with MAn proceeds by the trans-trans opening of the complexmer composed of a 1:1 molar ratio of L-MAVM or L-AVM and MAn.     

Synthesis and structural characterization of dendritic‐linear PMA‐APM‐r‐PS copolymers for a self‐assembled microporous matrix

A set of dendritic‐linear copolymers, poly(maleic anhydride‐grafted‐3,3′‐dimethyl‐(4‐aminophenylazanediyl)bis(2‐methylpropanoate))‐random‐polystyrene (PMA‐APM‐r‐PS), was successfully prepared by copolymerization of the novel dendritic macromonomer, 4‐(4‐(bis(3‐(4‐(bis(3‐methoxy‐2‐methyl‐3‐oxopropyl)amino)phenylamino)‐2‐methyl‐3‐oxopropyl)amino)phenylamino)‐4‐oxobut‐2‐enoic acid (MA‐APM), with styrene monomer. The dendritic MA‐APM macromonomer dendron 3,3′‐dimethyl‐(4‐aminophenylazanediyl)bis(2‐methylpropanoate) (APM) was then grafted by using the divergent growth method. FTIR, ¹H NMR, and ¹³C NMR spectra were used to identify the structures of the dendron, the dendritic macromonomer, and the dendritic‐linear PMA‐APM‐r‐PS copolymer. Furthermore, microporous dendritic‐linear PMA‐APM‐r‐PS copolymer films were prepared by using solvent‐induced phase separation at room temperature. We investigated the phase separation behavior and morphological structures of the dendritic‐linear copolymer film as functions of dendritic GMA‐HPAM segments in the content using SEM. Self‐assembly of the dendritic‐linear PMA‐APM‐r‐PS copolymer in the MG2‐X system, which represented the second generation dendron containing X wt % of the dendritic MA‐APM segment, resulted in submicron phase segregation. Interestingly, the submicron phase segregation morphology of the MG2–43 sample presented a uniform size distribution of ordered‐array structures. The results of this study demonstrate that controlling the appropriate macromonomer content via the grafting of a three‐dimensional structure results in a self‐assembly process that is capable of providing an ordered‐array microporous morphology in a polymer film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3290–3301, 2010     

A Novel,Facile Method for the Preparation of Uniform,Reactive Maleic Anhydride/Vinyl Acetate Copolymer Micro‐ and Nanospheres

Summary: A novel, stabilizer‐free dispersion polymerization with alkyl esters as reaction media gives uniform alternating microspheres of maleic anhydride (MAn)/vinyl acetate (VAc) copolymer. The diameter of the copolymer microspheres could be precisely controlled from 80 to 750 nm by changing the monomer concentration or feed ratio. Moreover, this new type of copolymer microspheres with reactive anhydride groups on the surface has good solubility in common nontoxic solvents such as water and ethanol.

SEM image of the powder surface of copolymer microspheres formed at [MAn] = [VAc] = 1.5 M .     

Preparation of poly(methyl acrylate‐co‐itaconic anhydride)/SiO2 hybrid materials via the sol–gel process—The effect of the coupling agent,inorganic content,and nature of the catalyst

Transparent poly(methyl acrylate‐co‐itaconic anhydride)/SiO₂ hybrid materials were prepared from methyl acrylate‐itaconic anhydride copolymer and tetraethoxysilane (TEOS) with the coupling agent (3‐aminopropyl)triethoxysilane (APTES) via a sol–gel process. The covalent bonds between the organic and inorganic phases were introduced by the in situ aminolysis of the itaconic anhydride units with APTES forming a copolymer bearing a triethoxysilyl group. These groups subsequently were hydrolyzed with TEOS and allowed to form a network. These reactions were monitored by Fourier transform infrared analysis. The amount of APTES had a dramatic influence on the gel time and sol fraction. The effect of APTES, the inorganic content, and the nature of the catalyst on the thermal properties and morphology of the hybrid materials were studied by differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and atomic force microscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 321–328, 2000     

Compatibilizing effect of a graft copolymer on bacterial poly(3‐hydroxybutyrate)/poly(methyl methacrylate) blends

Blends of isotactic (natural) poly(3‐hydroxybutyrate) (PHB) and poly(methyl methacrylate) (PMMA) are partially miscible, and PHB in excess of 20 wt % segregates as a partially crystalline pure phase. Copolymers containing atactic PHB chains grafted onto a PMMA backbone are used to compatibilize phase‐separated PHB/PMMA blends. Two poly(methyl methacrylate‐g‐hydroxybutyrate) [P(MMA‐g‐HB)] copolymers with different grafting densities and the same length of the grafted chain have been investigated. The copolymer with higher grafting density, containing 67 mol % hydroxybutyrate units, has a beneficial effect on the mechanical properties of PHB/PMMA blends with 30–50% PHB content, which show a remarkable increase in ductility. The main effect of copolymer addition is the inhibition of PHB crystallization. No compatibilizing effect on PHB/PMMA blends with PHB contents higher than 50% is observed with various amounts of P(MMA‐g‐HB) copolymer. In these blends, the graft copolymer is not able to prevent PHB crystallization, and the ternary PHB/PMMA/P(MMA‐g‐HB) blends remain crystalline and brittle. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1390–1399, 2002     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Synthesis of polar block grafted syndiotactic polystyrenes via a combination of iridium‐catalyzed activation of aromatic C?H bonds and atom transfer radical polymerization

A combination of iridium‐catalyzed C H activation/borylation and atom transfer radical polymerization (ATRP) was used to generate polar graft copolymers of syndiotactic polystyrene (sPS). The borylation at aromatic C H bonds of sPS and subsequent oxidation of boronate ester proceeded without negatively affecting the molecular weight properties and the tacticity of sPS. A macroinitiator suitable for ATRP could be synthesized by the esterification of 2‐bromo‐2‐methylpropionyl bromide and hydroxy‐functionalized sPS. The graft polymerizations of methyl methacrylate and tert‐butyl acrylate from the macroinitiator using ATRP afforded polar block grafted sPS materials, syndiotactic polystyrene‐graft‐poly(methyl methacrylate) (sPS‐g‐PMMA) and syndiotactic polystyrene‐graft‐poly(tert‐butyl acrylate) (sPS‐g‐PtBA). The latter was hydrolyzed to yield an amphiphilic graft copolymer, syndiotactic polystyrene‐graft‐poly(acrylic acid) (sPS‐g‐PAA). The structures of the copolymers were characterized by NMR and FTIR spectroscopies. Size exclusion chromatography and ¹H NMR spectroscopy were used to study any changes in the molecular weight properties from the parent polymer. A decrease in the hydrophobicity of the graft copolymers was confirmed by water contact angle measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6655–6667, 2009     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of well‐defined copolymer of acrylonitrile and maleic anhydride via RAFT polymerization

Well‐defined copolymer of acrylonitrile (AN) and maleic anhydride (MAn) has been successfully synthesized via reversible addition‐fragmentation chain transfer polymerization. The polymerization kinetics and “living”/controlled features were thoroughly studied and confirmed. The thermal properties and spinnability of the prepared copolymers were investigated via differential scanning calorimetry, thermogravimetric analyzer, and electrospinning subsequently. When PAN‐co‐PMAn was used as precursors, nonwoven with “crosslinked” structures was obtained during electrospinning. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5263–5269     

Grafting of polymers onto a carbon‐fiber surface by ligand‐exchange reaction of poly(vinyl ferrocene‐co‐vinyl monomer) with polycondensed aromatic rings of the surface

To improve the surface of carbon fiber, the grafting reaction of copolymer containing vinyl ferrocene (VFE) onto a carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber was investigated. The copolymer containing VFE was prepared by the radical copolymerization of VFE with vinyl monomers, such as methyl methacrylate (MMA) and styrene, using 2,2′‐azobisisobutyronitrile as an initiator. By heating the carbon fiber with poly(VFE‐co‐MMA) (number‐average molecular weight: 2.1 × 10⁴) in the presence of aluminum chloride and aluminum powder, the copolymer was grafted onto the surface. The percentage of grafting reached 46.1%. On the contrary, in the absence of aluminum chloride, no grafting of the copolymer was observed. Therefore, it is considered that the copolymer was grafted onto the carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber. The molar number of grafted polymer chain on the carbon‐fiber surface decreased with increasing molecular weight of poly(VFE‐co‐MMA) because the steric hindrance of grafted copolymer on the carbon‐fiber surface increases with increasing molecular weight of poly(VFE‐co‐MMA). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1868–1875, 2002