ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. IV. Effect of sulfur‐ and phosphorous‐type antioxidants

The effect of an antioxidant on the reaction mechanisms of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated using electron spin resonance (ESR). For sulfur‐ and phosphorous‐type antioxidants, changes of radical species and their contents during the PE crosslinking reaction were observed. It was confirmed that these antioxidants reacted preferentially with radicals yielded by decomposed DCP, restraining the crosslinking of PE by the increased antioxidant content. The compound of DCP and antioxidant decomposed to form 2‐phenyl isopropyl radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3092–3099, 2000     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent

The reaction mechanisms of thermal crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures were investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals formed by the thermal decomposition of DCP above 120°C. The kinetics of the free radical reaction were followed during crosslinking reactions at temperatures between 145 and 180°C. © 1997 John Wiley & Sons, Inc.     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent—II. The effect of phenolic antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The antioxidant reacts with the alkyl radicals in PE formed by the thermal decomposition of DCP above 120°C, and disturbs the crosslinking. A phenolic type antioxidant produced the phenoxy radical by the reaction with alkyl radicals formed in PE. It is suggested that the selection of a suitable antioxidant for PE crosslinking can be made by ESR analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2431–2439, 1997     

Electron spin resonance study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. V. Comparison with polypropylene and ethylene‐propylene copolymer

We studied the chemical reaction process of polypropylene (PP), ethylene‐propylene copolymer (EPM), and ethylene‐propylene‐diene copolymer (EPDM) crosslinking induced by dicumyl peroxide (DCP) using electron spin resonance (ESR). Free radicals appeared at an elevated temperature of around 120 °C and the behavior and kinetics of the reaction process were observed at 180 °C. The radical species detected in PP were alkyl type radicals, formed by the abstraction of hydrogen atoms from the tertiary carbon of polymer chains. For EPDM containing a diene component, the radicals were trapped at double bonds in this diene component to form allyl radicals. The resolutions of these spectra were extremely clear; hence, isotropic spectra of these polymer radicals were obtained. We measured the ESR at high temperatures and confirmed that the process of crosslinking induced by DCP was a free radical reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3383–3389, 2000     

Electron spin resonance study on chemical‐crosslinking reaction mechanisms of polyethylene using a chemical agent. VI. Effect of α‐methyl styrene dimer

The effect of α‐methyl styrene dimer (AMSD), which is used as a scorch retarder, on the reaction mechanisms of the chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated using electron spin resonance. When AMSD was added to PE containing DCP, the AMSD radical was observed; however, the PE alkyl radical or allyl radical presence was not detected. At 145 °C, crosslinking was obstructed as a result of the reaction between AMSD and alkyl radicals. As the temperature increased, AMSD fragmented to form 2‐phenyl‐2‐propyl and double bonds in PE. This generation of double bonds, however, accelerated crosslinking at 180 °C and was more effective than when AMSD was not present. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2151–2156, 2001     

ESR study of free-radical intramolecular transfer of a hydrogen atom: mechanisms and kinetics of the reactions

A method for preparing >Si(R₁(R₂ ^.) structures (R₁=CH₃, CD₃, or CH₂−CH₃, R₂ ^.=CH₂−CH₂ ^. or CD₂−CD₂ ^.) grafted to a silica surface is developed. The reactions of intramolecular transfer of H (D) atoms between the R₁ and R₂ ^. fragments were studied by ESR. The directions and kinetic parameters of these reactions were established. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1468–1471, August, 1997.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Radiation-induced crosslinking of polyethylene in the presence of acetylene: A gel fraction,UV-visible,and ESR spectroscopy study

Electron-spin resonance (ESR) and altraviolet (UV) visible spectroscopic evidence has been found for the formation of diene, triene and tetraene, following the irradiation of polyethylene in the presence of acetylene. The polyenes are formed by a mechanism which is different from that observed under vacuum or with inert gas saturation. The sum of the G (polyene) values obtained by UV spectroscopy is almost half that of initial radical formation. It is concluded that polyene bridges, predominantly diene, form crosslinks between radical pairs. G (X) values determined from gel fraction data, using Saito-Kang-Dole theory, are found to be greatly in error and misrepresentative of crosslink changes. © 1993 John Wiley & Sons, Inc.     

C~6~0与偶氮二异丁腈基自由基反应的ESR研究

C~6~0与偶氮二异丁基腈热分解产生的游离基(CH~3)~2CCN发生加成反应, 产物的红外光谱出现C~6~0和CN, CH的特征振动峰, ESR谱出现一对弱的肩峰, 中间的主峰容易功率饱和, 表明有两类物种存在, 提出了可能的反应机理。     

Superoxide anion radical generation in the NaOH/H(2)O(2)/Fe(III) system: a spin trapping ESR study

Formation of free radical intermediates in a NaOH/H(2)O(2)/Fe(III) system has been studied by ESR spectroscopy in the presence of the spin trap 5,5-dimethy-1-pyrroline N-oxide (DMPO). DMPO/O(2(*) ) (-) and DMPO/(*)OH signals were simultaneously detected in this system, but only the DMPO/(*)OH signal could be observed in the absence of Fe(III). Effects of pH values and Fe(III) concentrations on the ESR signal intensities were investigated in detail. Formation of DMPO/O(2(*) ) (-) adduct was inhibited by the addition of superoxide dismutase (SOD), catalase or nitro blue tetrazolium (NBT), and by chelating the Fe(III) with some chelators, including ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), and desferrioxamine (DFO). Deoxygenation from the NaOH/H(2)O(2)/Fe(III) mixture had a slight effect on the formation of DMPO/O(2(*) ) (-). DMPO/O(2(*) ) (-) signal was also detected from the NaOH/H(2)O(2)/Fe(II) mixture, but it can be totally suppressed under anaerobic conditions. Considering the hydrolysis of Fe(III) into polymerization iron species with oxide phases in the alkaline medium, Fe(2)O(3) was directly suspended into a mixture of NaOH/H(2)O(2) for comparison. Fortunately, the presence of Fe(2)O(3) suspension was found to be of benefit to the production of DMPO/O(2(*) ) (-). Influence of aging time of hydrolytic iron species on the superoxide anion radical generation was also studied. These results suggest that the generation of O(2(*) ) (-) from the NaOH/H(2)O(2)/Fe(III) system was probably caused by the heterogeneous surface catalysis initiated by hydrolytic iron species.     

Infrared spectroscopy studies of the cyclic anhydride as the intermediate for the ester crosslinking of cotton cellulose by polycarboxylic acids. III. Molecular weight of a crosslinking agent

Polycarboxylic acids have been used as nonformaldehyde crosslinking agents for cotton fabrics to replace the traditional N-methylol reagents. In this research, we compared 1,2,3,4-butanetetracarboxylic acid (BTCA) with poly(maleic acid) (PMA) as crosslinking agents for cotton cellulose. BTCA and PMA have similar molecular structures with carboxyl groups bonded to their molecular backbones, and both form five-membered cyclic anhydride intermediates during a curing process. However, BTCA is a more effective crosslinking agent for cotton cellulose than PMA. This is mainly attributed to the differences in the mobility of the anhydride intermediates to access the cellulosic hydroxyl groups during a curing process. The mobility of the anhydride intermediate of PMA is reduced due to its molecular size and multiple bonding between a PMA molecule and cellulose. Consequently, more anhydride and less ester are detected on the cotton fabric treated with PMA than on the fabric treated with BTCA. The amount of the unreacted anhydride intermediate on the fabric treated with PMA is reduced whereas the amount of ester is increased when another hydroxyl-containing compound of low molecular weight is present. Thus, the infrared spectroscopy data show a clear link between the molecular weight of a polycarboxylic acid and its effectiveness for crosslinking cotton cellulose. © 1997 John Wiley & Sons, Inc.     

Radiation-induced crosslinking: II. Effect on the crystalline and amorphous densities of polyethylene

Small-angle x-ray scattering (SAXS) was used to determine the structural changes in polyethylene induced by radiation. The changes in densities of the crystalline and amorphous phases, _c and _a , were calculated after direct determination of the mean square density fluctuation <²>. _a increases with increasing radiation dose for both linear and branched polyethylene. This accounts for the serious discrepancy between crystallinities determined from wide-angle x-ray scattering and density measurements. This study confirms our previous proposal that crosslinks occur primarily in the noncrystalline phase, most likely at the defects in the lateral grain boundary regions.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday.     

Effect of the reactivity of a crosslinking agent on the microphase separation in sequential IPNs: A Monte Carlo simulation study

The effects of the reactivity of a crosslinking agent on the microphase‐separated structure of sequential interpenetrating polymer networks are analyzed with a Monte Carlo simulation technique. The simulation results showed that the maximum structure factor decreases with an increasing crosslinking rate. However, the maximum structure factor increases when the crosslinking rate is increased further. This behavior is explained by a competition between the phase separation and the restriction of chain mobility due to the increase in molecular weight. In addition, there exists a chain length where the chain motion is the most restricted when crosslinks are formed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1005–1012, 2000     

Radiation-induced crosslinking: III. Effect on the crystalline and amorphous density fluctuations of polyethylene

Small-angle x-ray scattering (SAXS) was used to determine density fluctuation in radiation-induced crosslinked polyethylene of varying degrees of crystallinity. Density fluctuation FL decreases with increasing crystallinity, while it increases linearly with increasing radiation dose or degree of crosslinking. By means of extrapolation, density fluctuations in the crystalline and the amorphous phasesFL _c andFL _a were obtained. At a given dose,FL _a is greater thanFL _c . The increase inFL _a with radiation is found to be much greater than that ofFL _c compared with the initial values at 0 Mrad,FL _c showing only a negligible increase event at 312 Mrad. The present findings suggest that crosslinks are not introduced within the crystalline phase; they take place primarily in the noncrystalline phase, in agreement with the conclusions reached previously on the basis of changes in crystalline and amorphous densities in irradiated polyethylene.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

The ESR study of the influence of fluorinated alcohols on spin-adducts of phosphoryl radicals with C60 and C70: a change of magnetic resonance parameters and exclusive formation of monoadducts

Complex formation of^.C₆₀P(O)(OPrⁱ)₂ or three isomers of^.C₇₀P(O)(OPrⁱ)₂ with fluorinated alcohols CF₃CH₂OH (1), (CF₃)₃COH (2), and (CF₃)₂CHOH (3) results in an increase in the hyperfine splitting constants with the³¹P nucleus by approximately 3–4 G. Only monoadducts are formed when alcohols1–3 are added to toluene saturated solutions of Hg[P(O)(OPrⁱ)₂]₂ and C₆₀ under photochemical conditions of multi-addition of phosphoryl radicals to C₆₀. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1869–1871, September, 1998.     

Pulse radiolysis study on the mechanisms of reactions of CCl3OO. radical with quercetin, rutin and epigallocatechin gallate

The mechanisms of reactions between CC1₃OO^• radical and quercetin, rutin and epigallocatechin gallate (EGCG) have been studied using pulse radiolytic technique. It is suggested that the electron transfer reaction is the main reaction between CC1₃OO^• radical and rutin, EGCG, but there are two main pathways for the reaction of CC1₃OO^• radical with quercetin, one is the electron transfer reaction, the other is addition reaction. The reaction rate constants were determined. It is proved that quercetin and rutin are better CC1₃OO^• radical scavengers than EGCG.     

CH自由基和NO~2反应研究: I. 反应的热力学计算

探讨了CH自由基与NO~2反应的可能路径,通过计算确定了反应物,产物和稳定中间体的电子状态和平衡构型,并运用Gaussian-3方法和MRCISD方法对可能的反应路径进行了热力学计算。在多数情况下与实验值符合较好。对于个别与理论计算差别较大的实验值进行了评述。     

ESR imaging and FTIR study of thermally treated poly(acrylonitrile-butadiene-styrene) (ABS) containing a hindered amine stabilizer: Effect of polymer morphology, and butadiene and stabilizer content

Electron spin resonance imaging (ESRI) was applied to the study of thermal degradation at 393 K of poly(acrylonitrile-butadiene-styrene) (ABS) prepared by emulsion polymerization and containing 25% wt butadiene (ABS-25B). The polymer was doped with 1 or 2% wt Tinuvin 770 as the hindered amine stabilizer (HAS). The spatial distribution of the HAS-derived nitroxide radicals, obtained by 1D ESRI, was initially homogeneous, but became heterogeneous through sample depth with increasing treatment time, t. The spatial variation of ESR line shaping with sample depth was visualized by 2D spectral-spatial ESRI. ESR spectra along the sample depth, obtained by nondestructive (“virtual”) slicing of the 2D images, were used to deduce the relative intensity of nitroxide radicals present in two dynamically distinct sites; the sites were assigned to butadiene-rich (fast component) and SAN-rich domains (slow component), respectively. 1D and 2D ESRI allowed the determination of the extent of degradation within morphologically-distinct domains as a function of sample depth and treatment time. The results from the ESRI experiments were substantiated by attenuated total reflectance (ATR)-FTIR spectroscopy of the outer layer (500 μm thick) of the polymer. Both techniques indicated faster degradation of polymer samples that contained the higher HAS content, 2% wt. Comparison with the results obtained for a parallel study of ABS prepared by mass polymerization and containing 10% wt butadiene (ABS-10B) indicated clearly that the rate of degradation of the polymer prepared by emulsion polymerization (ABS-25B) is significantly reduced. This result can be explained by the formation of cross-linked “composite” networks during emulsion polymerization, which leads to greater thermal stability.     

Computational methods for the study of enzymic reaction mechanisms III: a perturbation plus QM/MM approach for calculating relative free energies of protonation

We describe a coupling parameter, that is, perturbation, approach to effectively create and annihilate atoms in the quantum mechanical Hamiltonian within the closed shell restricted Hartree-Fock formalism. This perturbed quantum mechanical atom (PQA) method is combined with molecular mechanics (MM) methods (PQA/MM) within a molecular dynamics simulation, to model the protein environment (MM region) effects that also make a contribution to the overall free energy change. Using the semiempirical PM3 method to model the QM region, the application of this PQA/MM method is illustrated by calculation of the relative protonation free energy of the conserved OD2 (Asp27) and the N5 (dihydrofolate) proton acceptor sites in the active site of Escherichia coli dihydrofolate reductase (DHFR) with the bound nicotinamide adenine dinucleotide phosphate (NADPH) cofactor. For a number of choices for the QM region, the relative protonation free energy was calculated as the sum of contributions from the QM region and the interaction between the QM and MM regions via the thermodynamic integration (TI) method. The results demonstrate the importance of including the whole substrate molecule in the QM region, and the overall protein (MM) environment in determining the relative stabilities of protonation sites in the enzyme active site. The PQA/MM free energies obtained by TI were also compared with those estimated by a less computationally demanding nonperturbative method based on the linear response approximation (LRA). For some choices of QM region, the total free energies calculated using the LRA method were in very close agreement with the PQA/MM values. However, the QM and QM/MM component free energies were found to differ significantly between the two methods.