Asymmetric oxidative coupling polymerization affording polynaphthylene with 1,1′-bi-2-naphthol units

The oxidative coupling polymerizations of racemic-, (R)-, and (S)-2,2′-dimethoxymethoxy-1,1′-binaphthalene-3,3′-diols were carried out with a copper catalyst with various ligands, such as N,N,N′,N′-tetramethylethylenediamine (TMEDA), (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine, (−)-sparteine, and (S)-(−)-2,2′-isopropylidenebis(4-phenyl-2-oxazoline) [(−)-Phbox], under an O₂ atmosphere. For example, a 10/1 (v/v) MeOH · H₂O-insoluble polymer with a number-average molecular weight of 3.8 × 10³, from a polymerization with CuCl–TMEDA followed by acetylation of the hydroxyl groups, was obtained in a 71% yield. Polymerization with (−)-Phbox proceeded in an S-selective manner to give a polymer with the highest negative specific rotation from the (S)-monomer. The obtained polymer was successfully converted into a polymer with the optically pure 1,1′-bi-2-naphthol unit based on the original monomer structure, which could be used as a polymeric chiral auxiliary and showed catalytic activity for the asymmetric diethylzinc addition reaction to aldehydes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4528–4534, 2004     

Highly selective oxidative cross‐coupling polymerization with copper(I)‐bisoxazoline catalysts

The asymmetric oxidative coupling polymerization of methyl 6,6′‐dihydroxy‐2,2′‐binaphthalene‐7‐carboxylate with the copper‐diamine catalysts under an O₂ atmosphere was carried out. As is the case with the CuCl‐2,2′‐(S)‐isopropylidenbis(4‐phenyl‐2‐oxazoline) [(S)IPhO] catalyst, a polymer with a high cross‐coupling selectivity of 96% was obtained in 71% yield, whose THF‐soluble part had a number‐average molecular weight of 4.5 × 10³. To estimate the enantioselectivity with respect to the cross‐coupling linkage in the obtained polymer, the model asymmetric oxidative cross‐coupling reaction with CuCl‐(S)IPhO was also conducted, and the products showed a 94% cross‐coupling selectivity and enantioselectivity of 31% ee (S). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6287–6294, 2005     

Synthesis and characterization of optically active aromatic polyimides derived from 2,2′-bis(2-trifluoro- 4-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

Optically active 2,2′-bis(2-trifluoro-4-aminophenoxy)-1,1′-binaphthyl and its corresponding racemate were prepared by a nucleophilic substitution reaction of 1,1′-bi-2-naphthol with 2-chloro-5-nitrotrifluorotoluene and subsequently by the reduction of the resulting dinitro compounds. A series of optically active and optically inactive aromatic polyimides also were prepared therefrom. These polymers readily were soluble in common organic solvents such as pyridine, N,N′-dimethylacetamide, and m-cresol and had glass-transition temperatures of 256 ∼ 278 °C. The specific rotations of the chiral polymers ranged from 167 ∼ 258°, and their chiroptical properties also were studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4536–4540, 1999     

Synthesis of regiocontrolled poly(4,6-di-n-butoxy-1,3-phenylene) by oxidative coupling polymerization

Poly(4,6-di-n-butoxy-1,3-phenylene) ( 6 ) was prepared by oxidative coupling polymerization of 1,3-di-n-butoxybenzene ( 1 ) or 2,2′,4,4′-tetra-n-butoxy biphenyl (3). Polymerizations were conducted in nitrobenzene in the presence of FeCl₃ at room temperature and produced polymers with number-average molecular weights up to 42,000. The effects of various factors, such as amount of FeCl₃ and reaction temperature and time were studied. The structure of polymer 6 was characterized by 270 MHz ¹H- and 68.5 MHz ¹³C-NMR spectroscopies and was estimated to consist of almost completely 1,3-linkage. The regiocontrolled polymer was readily soluble in common organic solvents. Thermogravimetric analysis of polymer 6 showed 10% weight loss at 390°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Chem 35 : 2259–2266, 1997     

Atom transfer radical polymerization of hexyl acrylate and preparation of its “all‐acrylate” block copolymers

This investigation reports the polymerization of hexyl acrylate (HA) using atom transfer radical polymerization technique and subsequently the preparation of its di‐ and triblock copolymers with methyl methacrylate. Atom transfer radical polymerization of HA was investigated using different initiators and CuBr or CuCl as catalyst in combination with varying ligands, e.g., 2,2′‐bipyridine and N,N,N′,N″,N″‐pentamethyl diethylenetriamine. Reaction parameters were adjusted to successfully polymerize HA with well‐defined molecular weights and narrow polydispersity indices. The polymerization was better controlled by the addition of polar solvents, which created a homogeneous catalytic system. UV–vis analysis showed that the polar solvent, acetone coordinated with copper (I), changes the nature of the copper catalyst, thereby influencing the dynamic equilibrium of activation–deactivation cycle. This resulted in improved control over polymerization as well as in lowering the polydispersity indices, but at the cost of polymerization rate compared with the bulk process. The presence of ? Br end group in the polymer chains was confirmed by ¹H NMR as well as MALDI‐TOF mass analysis. In addition, poly(hexyl acrylate) was used as macroinitiator to prepare various “all‐acrylate” block (diblock, triblock) copolymers that were characterized by GPC and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3499–3511, 2008     

Hydrogen‐bonding‐aided synthesis of novel ladderlike organobridged polysiloxane containing side‐chain naphthyl groups

With a hydrogen‐bonding template, a novel soluble aryl amide‐bridged ladderlike polysiloxane, containing naphthyl as the side‐chain group, has been successfully synthesized via a stepwise coupling polymerization. It is proposed that the monomer, N,N′‐di(3‐naphthyldiethoxylsilyl‐propyl)‐[4,4′‐oxybis(benzyl amide)], prepared by Grignard and hydrosilylation reactions, undergoes self‐assembly first via amido hydrogen bonding and then via hydrolysis, followed by condensation under controlled reaction conditions to yield a high molecular weight, soluble, dark yellow polymer. The analytical results (Fourier transform infrared, ¹H NMR, ²⁹Si NMR, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry) show that the polymer possesses an ordered ladderlike architecture. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 636–644, 2003     

Oxidative coupling polymerization of 2,3‐dihydroxynaphthalene with dinuclear‐type copper(II) catalyst

The oxidative coupling polymerization of 2,3‐dihydroxynaphthalene with the novel dinuclear‐type copper(II) catalysts successfully produced poly(2,3‐dihydroxy‐1,4‐naphthylene). For example, the MeOH‐insoluble polymer with a number average molecular weight of 4.4 × 10³ from the polymerization using the complex of CuCl₂ and N,N′‐bis(2‐morpholinoethyl)‐p‐xylylenediamine ( p ‐ 1 ) at room temperature under an O₂ atmosphere followed by acetylation of the hydroxyl groups was obtained in 63% yield. The structures of the tetraamine ligands and the counter anion of the copper(II) salts significantly influenced the catalyst activity. The polymerization of 2,2′‐dimethoxy‐1,1′‐binaphthalene‐3,3′‐diol with the 2CuCl₂‐ p ‐ 1 catalyst, however, resulted in a lower yield. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1635–1640, 2005     

A Simple Way for Synthesis of Alkyne-Telechelic Poly(methyl methacrylate) via Single Electron Transfer Radical Coupling Reaction

The telechelic α,ω‐alkyne‐poly(methyl methacrylate) (alkyne‐PMMA‐alkyne) was synthesized by single electron transfer radical coupling (SETRC) reaction of α‐alkyne, ω‐bromine‐poly(methyl methacrylate) (alkyne‐ PMMA‐Br). The propargyl 2‐bomoisobutyrate (PgBiB) was first prepared to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate at 45°C using CuCl/1,1,4,7,10,10‐hexamethyl triethylenetetramine (HMTETA) as homogeneous catalytic system. Then the SETRC reaction was conducted at room temperature in the presence of nascent Cu(0) and N,N,N′,N′ ′,N′ ′‐pentamethyldiethyllenetriamine (PMDETA). The precursor alkyne‐PMMA‐Br and coupled product alkyne‐PMMA‐alkyne were characterized by GPC and ¹H NMR in detail.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Synthesis of hyperbranched polymer having binaphthol units via oxidative cross‐coupling polymerization

The oxidative coupling polymerization of triphenylamine derivatives having 2‐naphthol moieties with a CuCl‐2,2′‐isopropylidenebis(4‐phenyl‐2‐oxazoline) catalyst under an O₂ atmosphere was carried out. The polymerization of the monomer bearing both the hydroxynaphthoate and naphthol units afforded a hyperbranched polymer with a high cross‐coupling selectivity of > 99%, which showed a number‐average molecular weight of 20.3 × 10³. In addition, the obtained polymer was quite soluble in THF. The photoluminescence and electrochemical properties of the obtained polymers were also examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1034–1041, 2008     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Deprotonative Metalation of Substituted Benzenes and Heteroaromatics Using Amino/Alkyl Mixed Lithium–Zinc Combinations

Different homoleptic and heteroleptic lithium–zinc combinations were prepared, and structural elements obtained on the basis of NMR spectroscopic experiments and DFT calculations. In light of their ability to metalate anisole, pathways were proposed to justify the synergy observed for some mixtures. The best basic mixtures were obtained either by combining ZnCl₂ ? TMEDA (TMEDA=N,N,N′,N′‐tetramethylethylenediamine) with [Li(tmp)] (tmp=2,2,6,6‐tetramethylpiperidino; 3 equiv) or by replacing one of the tmp in the precedent mixture with an alkyl group. The reactivity of the aromatic lithium zincates supposedly formed was next studied, and proved to be substrate‐, base‐, and electrophile‐dependent. The aromatic lithium zincates were finally involved in palladium‐catalyzed cross‐coupling reactions with aromatic chlorides and bromides.     

Structure in the condensed state and amphiphilic properties of novel copolymers having alkyl chains and phosphatidylcholine analogous groups

N‐Stearylacrylamide (SAAm), N‐oleylacrylamide (OAAm), and N‐laurylacrylamide (LAAm) were synthesized. They were characterized by ¹H‐NMR, ¹³C‐NMR, FT‐IR, melting point measurements, and elemental analysis. The copolymerizations of SAAm, OAAm, and LAAm with 2‐[(3‐(acrylamido)propyl)dimethylammonio]ethyl 2′‐isopropyl phosphate were carried out, and a series of amphiphilic poly(acrylamide)s (1a,b, 2, and 3a,b) were obtained. These copolymers showed polyelectrolyte behavior in their viscous properties in polar solvents. X‐ray diffraction analysis indicated that the copolymers 1a,b formed similar stacked bilayers with hydrophilic groups and hydrophobic parts. The polymorphic phase transition of these copolymers was also observed by DSC. In addition, the monolayers as well as LB films of these amphiphilic copolymers were prepared on the surface of water and their π–A isotherms were investigated at different temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1293–1302, 1999     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Deprotonative Metalation of Functionalized Aromatics Using Mixed Lithium–Cadmium,Lithium–Indium,and Lithium–Zinc Species

In situ mixtures of CdCl₂?TMEDA (0.5 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine) or InCl₃ (0.33 equiv) with [Li(tmp)] (tmp=2,2,6,6‐tetramethylpiperidino; 1.5 or 1.3 equiv, respectively) were compared with the previously described mixture of ZnCl₂?TMEDA (0.5 equiv) and [Li(tmp)] (1.5 equiv) for their ability to deprotonate anisole, benzothiazole, and pyrimidine. [(tmp)₃CdLi] proved to be the best base when used in tetrahydrofuran at room temperature, as demonstrated by subsequent trapping with iodine. The Cd–Li base then proved suitable for the metalation of a large range of aromatics including benzenes bearing reactive functional groups (CONEt₂, CO₂Me, CN, COPh) or heavy halogens (Br, I), and heterocycles (from the furan, thiophene, pyrrole, oxazole, thiazole, pyridine, and diazine series). Five‐membered heterocycles benefiting from doubly activated positions were similarly dideprotonated at room temperature. The aromatic lithium cadmates thus obtained were involved in palladium‐catalyzed cross‐coupling reactions or simply quenched with acid chlorides.     

Controlled/living polymerization of MMA promoted by heterogeneous initiation system (EPN‐X–CuX–bpy)

The polymerization of methyl methacrylate (MMA) promoted by heterogeneous initiation system (ethyl‐2‐halopropionate (EPN‐X)–CuX–2,2′‐bipyridyl (bpy), where X = Br or Cl) is studied in detail. The results show that ethyl‐2‐bromopropionate (EPN‐Br) is an efficient initiator as expected, and that CuCl–bpy, instead of CuBr–bpy, is a better catalyst for the controlled polymerization of MMA. The solvents with a high value of dielectric constant (ε) will lead to fast initiation and narrow molecular weight distribution (MWD). As a result, the controlled, living polymerization of MMA with EPN‐Br–CuCl–bpy can be got in ethyl acetate (EAc) at 100°C and in acetonitrile at 80°C. All results suggest that the initiation reaction is a controlling step in the controlled polymerization of MMA. The relationship between the UV spectra of CuCl–bpy and the performances of the polymerization in EAc or acetonitrile suggest that the formation of bis‐bpy complex, [Cubpy₂]X⁻, will lead to fast initiation and good control of the polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1255–1263, 1999     

Three‐component,negative‐type,alkaline‐developable,thermally stable,and photosensitive polymer based on poly(2,6‐dihydroxy‐1,5‐naphthalene), a crosslinker,and a photoacid generator

A negative working and chemically amplified photosensitive polymer has been developed, which is based on poly(2,6‐dihydroxy‐1,5‐naphthalene) (PDHN), the crosslinker 4,4′‐methylenebis[2,6‐bis(hydroxymethyl)]phenol, and the photoacid generator (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐(2‐methylphenyl)acetonitrile. PDHN, with a number‐average molecular weight of 25,000, was prepared by the oxidative coupling polymerization of 2,6‐dihydroxynaphthalene with di‐μ‐hydroxo‐bis[(N,N,N′,N′‐tetramethylethylenediamine)copper(II)] chloride in 2‐methoxyethanol at room temperature. The resulting PDHN showed a 5% weight loss temperature of 440 °C in nitrogen and a low dielectric constant of 2.82. The resist showed a sensitivity of 8.3 mJ cm^?2 and a contrast of 11 when it was exposed to 436‐nm light, followed by postexposure baking at 100 °C for 5 min and development with a 2.38 wt % aqueous tetramethylammonium hydroxide solution at 25 °C. A fine negative image featuring 10‐μm line‐and‐space patterns was obtained on a film 3 μm thick exposed to 10 mJ cm^?2 of ultraviolet light at 436 nm in the contact‐printed mode. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2235–2240, 2004     

TMEDA in Iron‐Catalyzed Hydromagnesiation: Formation of Iron(II)‐Alkyl Species for Controlled Reduction to Alkene‐Stabilized Iron(0)

N,N,N′,N′‐Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross‐coupling, C?H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron‐catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular‐level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA–iron(II)–alkyl species which undergo a controlled reduction to selectively form catalytically active styrene‐stabilized iron(0)–alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.     

Depurination of synthetic poly(inosinic acid) analogues

A poly(inosinic acid) analogue, poly{[1′-(β-hypoxanthine-9-yl)-5′-deoxy-D -erythro-pent-4′-enofuranose]-alt-[maleic acid]} (4), was synthesized by the alternating copolymerization of nucleoside derivative 1 with maleic anhydride and subsequent hydrolysis. N-Glycosidic bonds of the polymer were spontaneously hydrolyzed to liberate hypoxanthine from the polymer backbone in a buffer solution (pH 7.4) at room temperature. The depurination rate constant of the polymer at pH 7.4 and 37°C was measured to be 1.9 × 10⁻⁶ sec⁻¹, which was 10⁵-fold higher than that (3 × 10⁻¹¹ sec⁻¹) of the depurination of DNA that occurred in the biological systems. The increase in the depurination rate was attributable to the high potential energy of the polymer caused by the crowded environment around the bases, so that the polymer was more susceptible to the hydrolysis. Since natural nucleic acids often have compact structures with the crowded environment around the bases by the intricate chain folding, the depurination may also be accelerated in a similar manner in the biological system. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3361–3365, 1999     

Effect of sub-Tg relaxations on chromophore reorientation in corona-poled polymers

Activation volumes for chromophore reorientation were measured for a series of guest–host polymeric materials, indicating a significant coupling between chromophore motion and the glassy α and β relaxation dynamics of the polymer host. The specific systems studied were formed by individually dissolving N,N-dimethyl-p-nitroaniline (DpNA), 4-(dimethylamino)-4′-nitrotolane (DMANT), 4-(diethylamino)-4′-nitrotolane (DEANT), and 1-((4-(dimethylamino)phenyl)ethynyl)-4-((4-nitrophenyl)ethynyl)benzene (DMAPEANT) in poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA), and poly(isobutyl methacrylate) (PiBMA). In each of these systems, the isothermal, sub-T_g decay of the second-order optical susceptibility χ⁽²⁾ was monitored as a function of pressure using second harmonic generation. In each system, the observed decay of χ⁽²⁾ was represented by a stretched exponential equation from which the decay time τ₀ and decay distribution width β_KWW were determined. For each dopant molecule, the decrease in activation volume with the increasing size of the polymer host's alkyl side group and the pressure dependence of β_KWW were indicative of partial coupling between chromophore rotation and the glassy β relaxation dynamics of the polymer host. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1013–1024, 1998