Thermal behavior and phase behavior in blends of liquid crystalline poly(aryl ether ketone) and poly(aryl ether ether ketone) containing thioether units

Thermal behavior and phase behavior in blends of liquid crystalline poly(aryl ether ketone) with lateral methoxy groups (M-PAEK) and poly(aryl ether ether ketone) containing thioether units (S-PEEK) have been investigated by differential scanning calorimetry (DSC) and polarized light microscopy (PLM) techniques. The results indicate that the composition of the blends has great effect on the phase behavior and morphology. Thin films of pure M-PAEK and S-PEEK crystallized from the melts exhibit typical mosaic and spherulitic structures, respectively. For the blends with higher M-PAEK contents (> 50%), an unusual ring-banded spherulite with structural discontinuity is formed. The bright core and rings of the ring-banded spherulites under PLM are composed of M-PAEK phase, while the dark rings consist mainly of S-PEEK phase. For the 50:50 M-PAEK/S-PEEK blend, the ring-banded spherulites and S-PEEK spherulites coexist, which implies that a partial phase separation between the two components takes place in the melting state. In S-PEEK-rich blends, a volume-filled spherulite is produced. In addition, the effect of isothermal crystallization temperature on the phase behavior, especially the ring-banded spherulite formation in the blends, is discussed.     

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) and poly(aryl ether ether ketone)

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) (M‐PAEK) and poly(aryl ether ether ketone) (PEEK) has been investigated by means of differential scanning calorimetry (DSC), polarized light microscopy (PLM), and scanning electron microscopy (SEM) techniques. The measurements reveal that the formation of the rhythmically grown ring‐banded spherulites in the M‐PAEK/PEEK blends is strongly dependent on the blend composition. In the M‐PAEK‐rich blends, upon cooling, an unusual ring‐banded spherulite is formed, which is ascribed to structural discontinuity caused by a rhythmic radial growth. For the 50:50 M‐PAEK/PEEK blend, ring‐banded spherulites and individual PEEK spherulites coexist in the system. In the blends with PEEK as the predominant component, M‐PAEK is rejected into the boundary of PEEK spherulites. The cooling rate and crystallization temperature have great effect on the phase behavior, especially the ring‐banded spherulite formation in the blends. In addition, the effects of M‐PAEK phase transition rate and phase separation rate on banded spherulite formation is discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3011–3024, 2007     

几种甲基取代的聚醚酮酮的合成与表征

聚芳醚酮是一类热、电、机械性能优异的热塑性工程塑料,其合成方法有亲电取代法和亲核取代法．近年来,通过改变主链上醚酮键的比例和次序以及在主链上引入ｓｐ３杂化原子团,如砜基、烷基,对其进行结构上的改性研究已有很多报道［１４］．另一种结构上的改性研究是在...     

Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Melt rheological behavior

Dynamic rheological measurements were carried out on blends of poly(ether ether ketone) (PEEK)/poly(aryl ether sulfone) (PES) in the melt state in the oscillatory shear mode. The data were analyzed for the fundamental rheological behavior to yield insight into the microstructure of PEEK/PES blends. A variation of complex viscosity with composition exhibited positive–negative deviations from the log‐additivity rule and was typical for a continuous‐discrete type of morphology with weak interaction among droplets. The point of transition showed that phase inversion takes place at composition with a 0.6 weight fraction of PEEK, which agreed with the actual morphology of these blends observed by scanning electron microscopy. Activation energy for flow, for blend compositions followed additive behavior, which indicated that PEEK/PES blends may have had some compatibility in the melt. Variation of the elastic modulus (G′) with composition showed a trend similar to that observed for complex viscosity. A three‐zone model used for understanding the dynamic moduli behavior of polymers demonstrated that PEEK follows plateau‐zone behavior, whereas PES exhibits only terminal‐zone behavior in the frequency range studied. The blends of these two polymers showed an intermediate behavior, and the crossover frequency shifted to the low‐frequency region as the PEEK content in PES increased. This revealed the shift of terminal‐zone behavior to low frequency with an increased PEEK percentage in the blend. Variation of relaxation time with composition suggested that slow relaxation of PEEK retards the relaxation process of PES as the PEEK concentration in the blend is increased because of the partial miscibility of the blend, which affects the constraint release process of pure components in the blend. A temperature‐independent correlation observed in the log–log plots of G′ versus loss modulus (G″) for different blend systems fulfilled the necessary condition for their rheological simplicity. Further, the composition‐dependent correlations of PEEK/PES blends observed in a log–log plot of G′ versus G″ showed that the blends are either partially miscible or immiscible and form a discrete‐continuous phase morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1548–1563, 2004     

(夹)二氧蒽改性聚芳醚酮酮

共聚物;合成;(夹)二氧蒽改性聚芳醚酮酮     

Isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone)

The isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone) are investigated by differential scanning calorimetry over two temperature regions. The Avrami equation describes the primary stage of isothermal crystallization kinetics with the exponent n ≈ 2 for both melt and cold crystallization. With the Hoffman–Weeks method, the equilibrium melting point is estimated to be 406 °C. From the spherulitic growth equation proposed by Hoffman and Lauritzen, the nucleation parameter (K_g) of the isothermal melt and cold crystallization is estimated. In addition, the K_g value of the isothermal melt crystallization is compared to those of the other poly(aryl ether ketone)s. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1992–1997, 2000     

液晶聚芳醚酮/含甲基苯侧基聚芳醚酮共混体系的环带球晶

本文通过研究含氯侧基液晶聚芳醚酮/含甲基苯侧基聚芳醚酮共混体系(结晶/非晶)环带球晶的形态演变和发展过程; 利用选择性溶剂刻蚀方法确定共混体系环带球晶的相组成和相结构, 探讨了环带球晶的形成机理.     

含间苯连接的聚醚醚酮酮的等温结晶过程和形态结构

用透射电子显微镜和电子衍射方法研究了含间苯连接的聚醚醚酮酮（PEEKmK）溶液浇铸薄膜的等温结晶过程和形态结构．结果表明，PEEKmK无论从玻璃态结晶还是从熔体结晶均能形成2种不同取向的结晶形态结构，即平放片晶和侧放片晶；前者c轴垂直于膜平面，后者c轴平行于膜平面．其结晶发展过程为先形成平放单晶状片晶，随着时间的增长，在单晶上开始生长侧放片晶，逐渐发展形成球晶，最终形成2种不同取向的单晶和球晶共存的结晶形态结构．     

聚芳醚酮醚酮酮类聚合物的结晶与多晶型

晶体结构;聚芳醚酮醚酮酮类聚合物的结晶与多晶型     

含三苯基氧磷结构聚芳醚醚酮酮的合成与表征

以苯酚、对二溴苯及苯基磷酰二氯为原料合成出二(4-苯氧基苯基)苯基氧磷(BPOPPO)。 三氯化铝(AlCl₃)为催化剂,通过缩聚反应,BPOPPO与对苯二甲酰氯(TPC)反应制备出一种含有三苯基氧磷结构的聚醚醚酮酮(P-PEEKK)树脂。 采用傅里叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)、热重分析仪(TGA)和广角X射线衍射(WAXD)等技术手段对P-PEEKK树脂的结构和性能进行表征。 结果表明,P-PEEKK树脂属于非晶聚合物,玻璃化转变温度(T_g)较高,为190.5 ℃;热分解温度(T_5%)为515 ℃,耐热性能较好;极限氧指数(LOI)为42,阻燃性能好,为难燃材料;易溶解于氯仿、1,2-二氯乙烷、N,N-二甲基乙酰胺等有机溶剂中,溶解性能较好,便于涂膜加工;拉伸强度为62 MPa,力学性能较好。     

Glass transition,crystallization, and morphology relationships in miscible poly(aryl ether ketones) and poly(ether imide) blends

The relationships among glass transition, crystallization, melting, and crystal morphology of poly(aryl ether ketone) (PAEK)/poly(other imide) (PEI) blends was studied by thermal, optical and small-angle x-ray scattering (SAXS) methods. Two types of PAEK were chosen for this work: poly(aryl ether ether ketone), PEEK, and poly(aryl ether ketone ketone), PEKK, which have distinctly different crystallization rates. Both PAEKs show complete miscibility with PEI in the amorphous phase. As PAEK crystallizes, the noncrystallizable PEI component is rejected from the crystalline region, resulting in a broad amorphous population, which was indicated by the broadening and the increase of T_g over that of the purely amorphous mixture. The presence of the PEI component significantly decreases the bulk crystallization and crystal growth rate of PAEK, but the equilibrium melting temperature and crystal surface free energies are not affected. The morphology of the PEI segregation was investigated by SAXS measurements. The results indicated that the inter(lamellar-bundle) PEI trapping morphology was dominant in the PEEK/PEI blends under rapid crystallization conditions, whereas the interspherulitic morphology was dominant in the slow crystallizing PEKK/PEI blends. These morphologies were qualitatively explained by the expression δ=D/G, where G was the crystal growth rate and D was the mutual diffusion coefficient. © 1993 John Wiley & Sons, Inc.     

甲基取代聚芳醚酮的合成与表征

甲基取代聚芳醚酮的合成与表征;甲基侧基;缩聚;热性能     

含间苯基聚醚醚酮酮的合成与性能研究

含间苯基聚醚醚酮酮的合成与性能研究林权，王一凡，张万金，吴忠文，尹玖梅（吉林大学化学系，长春，１３００２３）（中国科学院长春应用化学研究所）关键词聚醚醚酮酮，间苯基，熔点，玻璃化转变温度聚芳醚酮类高聚物具有优异的热、电、机械性能．全对苯基位聚醚醚酮酮...     

Stress-enhanced transport of toluene in poly aryl ether ether ketone (PEEK)

The transport of fluids in the semicrystalline polymer, poly(aryl ether ether ketone) (PEEK), was investigated. Both solubility and rate of penetration of toluene into PEEK are markedly increased by the application of an external stress. The induction period (i.e., the time for the sorption to begin) is a function of applied stress as well as temperature and crystallinity. At 22°C in 29% crystalline PEEK the induction period was reduced from more than 2000 h to approximately 10 h whereas the solubility of toluene was increased from 9 to 44 wt % upon the application of an external tensile stress of 30 MPa. A critical stress (i.e., a stress value below which the stress-enhanced effects are not observed) was determined. The critical stress is a strong function of crystallinity and temperature. © 1996 John Wiley & Sons, Inc.     

Preparation,characterization, and mechanical properties of microcellular poly(aryl ether ketone) foams

High‐performance microcellular closed‐cell foams were prepared by a two‐stage batch foaming process from fluorinated poly(ether ether ketone) and characterized by scanning electronic microscopy, tensile, and dynamic mechanical analysis (DMA). The effects of saturation pressure and temperature on the cell size, cell density, and bulk density of porous materials had been discussed. The resulting materials had average cell diameters in the range 3–17 μm, and cell densities (N_f) in the order of 0.6 × 10⁹–1.39 × 10¹⁰ cells/cm³. The porosity (V_f) was in the range of 0.2–0.85. In contrast, experimental values of Young's moduli were in good agreement with theoretically predicted values, but the relative strengths were somewhat lower than that predicted. The relaxation mechanism of microcellular was systematically investigated by DMA. The dynamic mechanical spectrometry showed that the storage modulus curve at high temperature region appeared a peak and the loss modulus was lower as compared to their solid counterparts. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 173–183, 2007     

聚醚醚酮酮结晶度研究

聚醚醚酮酮结晶度研究刘天西，王尚尔，张宏放，莫志深（中国科学院长春应用化学研究所高分子物理联合开放研究实验室长春１３００２２）那辉，王军佐，吴忠文（吉林大学化学系长春）关键词聚醚醚酮酮，广角Ｘ射线衍射，结晶度新型特种工程塑料聚醚醚酮酮（ＰＥＥＫＫ）具...     

聚芳醚醚酮的热老化寿命研究

本工作用热重法(TG)研究了聚芳醚醚酮(PEEK)在空气和氮气中的热分解反应过程;确定了PEEK在这两种气氛中的热分解反应模型均符合无规引发断裂模型;在空气中PEEK的热分解显示两个过程,由此计算其在空气中第一阶段的热分解和氮气中的热分解反应活化能分别为214.7kJ/mol和232.2kJ/mol;由热分解反应动力学参数推算出热老化寿命曲线,并讨论了实验条件对结果的影响,进而以失重5%作为材料寿终指标估算出PEEK在氮气和空气中使用10年的最高温度分别为307℃和274℃。     

Novel fluorinated poly(aryl ether ketone)s

Two novel fluorinated monomers were prepared and polymerized with biphenols to produce amorphous, thermally stable poly(aryl ether ketone)s. The properties of the fluorinated polymers are compared to those of unfluorinated, amorphous poly(aryl ether ketone)s. The presence of fluorine in the polymers was found to cause a decrease in glass transition temperature and Young's moduli, however, no increase in thermal stability was observed. The fluorinated polymers are soluble in common organic solvents such as chloroform and methylene chloride at room temperature, and also show solubility in solvents containing a ketonic moiety, such as acetone. Evidence of polymer branching through fluorines considered to be unreactive under the polymerization conditions was found. Efforts were made to evaluate the reactivity of fluorine atoms under the polymerization conditions using both molecular modeling and ¹⁹F-NMR to ascertain if such branching could be avoided. © 1995 John Wiley & Sons, Inc.     

含间位聚醚酮醚酮酮的合成与结晶

聚芳醚酮类聚合物因其综合性能优异而在高技术领域得到广泛应用．这些高聚物的主链大都为全对位连接,使其熔点较高以至加工难度增大．如果在聚合物主链中引入间位结构,则可在对玻璃化转变温度影响较小的情况下降低熔点来改善加工条件［１］．含间位聚醚酮醚酮酮（ＰＥＫＥＫｍＫ）也是其中一种．本文主要研究ＰＥＫＥＫｍＫ的合成、基本物性与结晶行为．样品的合成与制备：单体４,４′双（对苯氧基）二苯甲酮按文献［２］方法合成．聚合物参照文献［３］合成．将粉末样品在油压机上熔融后快速取出投入冰水中淬火得无定形样品,或将熔融…