Identification of extracellular arsenical metabolites in the growth medium of the microorganisms apiotrichum humicola and scopulariopsis brevicaulis

The separation and identification of some of the arsenic species produced in cells present in the growth medium when the microorganisms Apiotrichum humicola (previously known as Candida humicola) and Scopulariopsis brevicaulis were grown in the presence of arsenicals were achieved by using hydride generation–gas chromatography–atomic absorption spectrometry methodology (HG GC AA). Arsenite, monomethylarsonate, dimethylarsinate and trimethylarsine oxide were detected following incubation with arsenate. With arsenite as a substrate, the metabolites were monomethylarsonate, dimethylarsinate and trimethylarsine oxide; monomethylarsonate afforded dimethylarsinate and trimethylarsine oxide, and dimethylarsinate afforded trimethylarsine oxide. Trimethylarsine was not detected when the arsenic concentration was 1 ppm.     

Refractory methylated arsenic compounds in estuarine waters: Tracing back elusive species

Water from the Tagus estuary, Portugal, was concentrated and purified through evaporation, solvent extraction, ion exchange and HPLC, and peaks of refractory arsenicals were detected by difference between total arsenic (GF AA) and hydride-forming arsenic species (HG QF AA). DCI mass spectra of these fractions presented peaks at m/z 139, 157 and 159; the proportion of m/z 157 and 159 peaks, approx. 3:1, suggested a chlorinated moiety. DCI MS/MS daughter-ion fragmentation of these peaks seems compatible with dimethylarsenic (cacodylic) acid and structures of the type Me₂As(O)Cl or Me₃As(OH)F. The refractory character of these fractions, however, cannot be explained by these structures. Further work with mixtures of halogen and arsenic species injected in the HPLC system showed that fluoride and iodide can shift DMA (dimethylarsenic) and TMAO (trimethylarsine oxide) to shorter retention times but not to R_f values similar to refractory arsenicals. These latter are attained by mixtures of sodium chloride + arsenobetaine, and sodium fluoride and chloride + arsenocholine. We suggest that peaks at m/z 139 and 157 correspond to fragments of a heavier refractory molecule mainly formed by halogenated betaines including chloroarsenobetaine and chloro- and fluoro-arsenocholine.     

Biomethylation of Arsenic in an Arsenic-rich Freshwater Environment

Arsenic circulation in an arsenic-rich freshwater ecosystem was elucidated to detect arsenic species in the river water and in biological samples living in the freshwater environment. Water-soluble arsenic compounds in biological samples were extracted with 70% methanol. Samples containing arsenic compounds in the extracts were treated with 2 mol dm³ of sodium hydroxide and reduced with sodium borohydride. The detection of arsenic species was accomplished using a hydride generation/cold trap/cryofocus/gas chromatography-mass spectrometry (HG/CT/CF/GC-MS) system. The major arsenic species in the river water, freshwater algae and fish are inorganic arsenic, dimethylarsenic and trimethylarsenic compounds, respectively. Trimethylarsenic compounds are also detected in aquatic macro-invertebrates. The freshwater unicellular alga Chlorella vulgaris, in a growth medium containing arsenate, accumulated arsenic and converted it to a dimethylarsenic compound. The water flea Daphnia magna, which was fed on arsenic-containing algae, converted it to a trimethylarsenic species. © 1997 by John Wiley & Sons, Ltd.     

The ability of Ex2Box4+ to interact with guests containing π‐electron‐rich and π‐electron‐poor moieties

The ability of Ex 2 Box⁴⁺ as a host, able to trap guests containing both π‐electron rich (polycyclic aromatic hydrocarbons‐PAHs) and π‐electron poor (quinoid‐ and nitro‐PAHs) moieties was investigated to shed light on the main factors that control the host–guest (HG) interaction. The nature of the HG interactions was elucidated by energy decomposition (EDA‐NOCV), noncovalent interaction (NCI), and magnetic response analyses. EDA‐NOCV reveals that dispersion contributions are the most significant to sustain the HG interaction, while electrostatic and orbital contributions are very tiny. In fact, no significant covalent character in the HG interactions was observed. The obtained results point strictly to NCIs, modulated by dispersion contributions. Regardless of whether the guests contain π‐electron‐rich or π‐electron‐poor moieties, and no significant charge‐transfer was observed. All in all, HG interactions between guests 3‐14 and host 2 are predominantly modulated by π‐π stacking.     

Ultra high performance liquid chromatography with ion‐trap TOF‐MS for the fast characterization of flavonoids in Citrus bergamia juice

We have developed a fast ultra HPLC with ion‐trap TOF‐MS method for the analysis of flavonoids in Citrus bergamia juice. With respect to the typical methods for the analysis of these matrices based on conventional HPLC techniques, a tenfold faster separation was attained. The use of a core–shell particle column ensured high resolution within the fast analysis time of only 5 min. Unambiguous determination of flavonoid identity was obtained by the employment of a hybrid ion‐trap TOF mass spectrometer with high mass accuracy (average error 1.69 ppm). The system showed good retention time and peak area repeatability, with maximum RSD% values of 0.36 and 3.86, respectively, as well as good linearity (R² ≥ 0.99). Our results show that ultra HPLC can be a useful tool for ultra fast qualitative/quantitative analysis of flavonoid compounds in citrus fruit juices.     

Seasonal control of arsenic speciation in an estuarine ecosystem

Arsenic speciation in the Itchen estuary and Southampton Water (UK) has been shown to vary seasonally, with detectable (>0.02μg As dm^?3) dissolved arsenic(III) and methylated arsenic only being present from May to early October. This corresponds to the time period during which water temperatures exceed 12°C. For the remainder of the year, inorganic arsenic(V) was the only detectable species. At its peak, ca 30% of the dissolved arsenic was present as methylated forms with dimethylarsenic (DMAs) being the predominant bioarsenical. Significant quantities of monomethyl-arsenic (MMAs) and inorganic arsenic(III) were also present, however. The concentrations of the bioarsenical species varied with position in the estuary and generally increased with salinity. Measurements made during the period of peak algal activity implicated the highsalinity area of the estuary as the most probable region in which the methylated arsenicals are generated. At some sites, a distinct lag was observed between the appearance of dimethylarsenic and the detection of arsenic(III)and monomethylarsenic. Chlorophyll a concentration proved to be a poor predictor of the appearance of reduced and methylated arsenic in the water column. Possible sources of dissolved methylated arsenic are discussed.     

Vibrational Spectroscopy of the Dehydrogenated Uracil Radical by Autodetachment of Dipole‐Bound Excited States of Cold Anions

Molecules with large enough dipole moments can bind an electron by the dipole field, which has little effect on the molecular core. A molecular anion can be excited to a dipole‐bound state, which can autodetach by vibronic coupling. Autodetachment spectroscopy of a complex anion cooled in a cryogenic ion trap is reported. Vibrational spectroscopy of the dehydrogenated uracil radical is obtained by a dipole‐bound state with partial rotational resolution. Fundamental frequencies for 21 vibrational modes of the uracil radical are reported. The electron affinity of the uracil radical is measured accurately to be 3.4810±0.0006 eV and the binding energy of the dipole‐bound state is measured to be 146±5 cm^?1. The rotational temperature of the trapped uracil anion is evaluated to be 35 K.     

Non-chromatographic hydride generation atomic spectrometric techniques for the speciation analysis of arsenic,antimony, selenium,and tellurium in water samples—a review

Hydride generation (HG) coupled with AAS, ICP–AES, and AFS techniques for the speciation analysis of As, Sb, Se, and Te in environmental water samples is reviewed. Careful control of experimental conditions, offline/online sample pretreatment methods employing batch, continuous and flow-injection techniques, and cryogenic trapping of hydrides enable the determination of various species of hydride-forming elements without the use of chromatographic separation. Other non-chromatographic approaches include solvent extraction, ion exchange, and selective retention by microorganisms. Sample pretreatment, pH dependency of HG, and control of NaBH₄/HCl concentration facilitate the determination of As(III), As(V), monomethylarsonate (MMA), and dimethylarsinate (DMA) species. Inorganic species of arsenic are dominant in terrestrial waters, whereas inorganic and methylated species are reported in seawater. Selenium and tellurium speciation analysis is based on the hydrides generation only from the tetravalent state. Se(IV) and Se(VI) are the inorganic selenium species mostly reported in environmental samples, whereas speciation of tellurium is rarely reported. Antimony speciation analysis is based on the slow kinetics of hydride formation from the pentavalent state and is mainly reported in seawater samples.     

Methylated arsenic species in estuarine porewaters

Inorganic arsenic, monomethylarsenic and dimethylarsenic species have been observed in samples of sediment porewater collected from the Tamar Estuary in South-West England. Porewater samples were collected using in situ dialysis. The arsenic species were separated by hydride generation and concentrated by liquid nitrogen trapping, prior to analysis by directly coupled gas chromatography-atomic absorption spectroscopy. The predominant dissolved arsenic species present was inorganic arsenic (5-62 m?g dm^?3). However, this is the first time significant concentrations of methylated arsenic species have been quantified in estuarine porewaters (0.04–0.70 m?g dm^?3), accounting for between 1 and 4% of the total dissolved arsenic. The presence of methylated arsenic compounds in porewaters is attributed to in situ environmental methylation, although the possibility of methylated arsenic species being derived from biological debris cannot be excluded.     

Rapid separation and identification of furocoumarins in Angelica dahurica by high‐performance liquid chromatography with diode‐array detection,time‐of‐flight mass spectrometry and quadrupole ion trap mass spectrometry

High‐performance liquid chromatography with diode‐array detection (HPLC/DAD), time‐of‐flight mass spectrometry (HPLC/TOFMS) and quadrupole ion trap mass spectrometry (HPLC/QITMS) were used for separation, identification and structural analysis of furocoumarins in Angelica dahurica. Two furocoumarins (imperatorin and isoimperatorin) in Angelica dahurica extract were identified unambiguously by comparing their relative retention times, characteristic ultraviolet information and accurate mass measurement. A formula database of known furocoumarins in Angelica dahurica was established, against which the other 21 furocoumarins were identified effectively based on the accurate extract masses and formulae acquired by HPLC/TOFMS. In order to distinguish the isomers, multi‐stage mass spectrometry (MSⁿ, ion trap mass spectrometry) was used. General fragmentation behavior of the furocoumarins in the ion trap mass spectrometer was studied by the two furocoumarin standards, and their fragmentation rules in MSⁿ spectra were summarized. These deduced fragmentation rules of furocoumarins were successfully implemented in distinguishing the three groups of isomers in Angelica dahurica by HPLC/QITMS. By using the three different analytical techniques, 23 furocoumarins in Angelica dahurica were tentatively identified within 30 min. Finally, HPLC/TOFMS fingerprints of Angelica dahurica were established by which it can be concluded that a rapid and effective method based on the three analytical techniques for identification of chemical components was established. This can provide help for further quality control of Angelica dahurica and pharmacology mechanism study of furocoumarins in Angelica dahurica. Copyright © 2009 John Wiley & Sons, Ltd.     

The discovery of hidden arsenic species in coastal waters

The analysis of ultraviolet (UV)-irradiated and untreated seawater samples has shown that the dissolved arsenic content of marine waters cannot be completely determined by hydride generation–atomic absorption spectrophotometry without sample pretreatment. Irradiation of water samples obtained during a survey of arsenic species in coastal waters during the summer of 1988 gave large increases in the measured speciation. Average increases in the measured speciation. Average increases in total arsenic, monomethylarsenic and dimethylarsenic were 0.29 μg As dm^?3 (25%), 0.03 μg As dm^?3 (47%) and 0.12 μg As dm^?3 (79%), respectively. Overall, an average 25% increase in the concentration of dissolved arsenic was observed following irradiation. This additional arsenic may be derived from compounds related to algal arsenosugars or to their breakdown products. These do not readily yield volatile hydrides when treated with borohydride and are not therefore detected by the normal hydride generation technique. This has important repercussions as for many years this procedure, and other analytical procedures which are equally unlikely to respond to such compounds, have been accepted as giving a true representation of the dissolved arsenic speciation in estuarine and coastal waters. A gross underestimate may therefore have been made of biological involvement in arsenic cycling in the aquatic environment.     

Determination of arsenic species in oyster tissue by microwave‐assisted extraction and liquid chromatography–atomic fluorescence detection

A method for the determination of arsenic species in oyster tissue is established. The extraction of arsenic species is carried out by using low‐power microwaves. Quantitative extraction is obtained at a power of 40 W, and in 5 min, using the extracting agent methanol/water (1 + 1). The measurements are carried out using liquid chromatography–UV irradiation–hydride generation–atomic fluorescence detection (LC–UV–HG–AFS). Three arsenic species were detected in oyster tissue: arsenobetaine (AsBet) (87%), a probable arsenosugar (AsS) (4.9%), and dimethylarsinate (DMA) (4.7%). No influence of the clean‐up, the microwave field or the IR drying system on the stability of the arsenic compounds was observed. The extracts can be kept stable up to 3 days at 4 °C. The performance of the method is proved on fresh samples, as they are usually analysed in routine laboratories. Copyright © 2001 John Wiley & Sons, Ltd.     

Simultaneous Differential Pulse Voltammetric Determination of Ascorbic Acid and Caffeine in Pharmaceutical Formulations Using a Boron‐Doped Diamond Electrode

A cathodically pretreated boron‐doped diamond electrode was used for the simultaneous anodic determination of ascorbic acid (AA) and caffeine (CAF) by differential pulse voltammetry. Linear calibration curves (r=0.999) were obtained from 1.9×10^?5 to 2.1×10^?4 mol L^?1 for AA and from 9.7×10^?6 to 1.1×10^?4 mol L^?1 for CAF, with detection limits of 19 μmol L^?1 and 7.0 μmol L^?1, respectively. This method was successfully applied for the determination of AA and CAF in pharmaceutical formulations, with results equal to those obtained using a HPLC reference method.     

Arsenic speciation in some environmental samples: a comparative study of HG–GC–QFAAS and HPLC–ICP–MS methods

Some water and soil extracts polluted with arsenic, and a sewage sludge certified for total arsenic have been analysed by high‐performance liquid chromatography–inductively coupled plasma–mass spectrometry (HPLC–ICP–MS) and hydride generation–gas chromatography– quartz furnace atomic absorption spectrometry (HG–GC–QFAAS techniques.) Detection limits in the range of 200–400 and 2–10 ng l⁻¹ respectively allowed the determination of inorganic [As(III), As(V)] and methylated (DMA, MMA, TMAO) arsenic species present in these samples. Results obtained by both methods are well correlated overall, whatever the arsenic chemical form and concentration range (8–10 000 μg l⁻¹). Comparison of these results enabled us to point out features and disadvantages of each analytical method and to reach a conclusion that they are suitable for arsenic speciation in these environmental matrices. Copyright © 2000 John Wiley & Sons, Ltd.     

Electrochemical Analysis of Acrylamide Using Screen‐Printed Carboxylated Single‐Walled Carbon Nanotube Electrodes

Acrylamide (AA) was electrochemically detected and quantified by means of its voltammetric response on carboxylic modified Single‐Walled Carbon Nanotube Screen Printed Electrodes (COOH‐SWCNT‐SPEs). The electroreduction signal of AA was proportional to AA concentration at low values (below 300 µM) and the observed sensitivity was explained in terms of AA adsorption on the COOH‐SWCNT‐SPEs that was demonstrated using the electrochemical response of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? and Raman spectroscopy experiments. In order to test the suggested analytic approach (LOD of 0.03 µM, LOQ of 0.04 µM), detection and quantification of AA in fried potatoes was carried out using the proposed electrochemical method and HPLC. Both techniques showed similar contents of AA.     

The Influencing Mechanism of Acidity on the Oxidation Peak Currents of Uric Acid and Ascorbic Acid at the PACPE by Cyclic Voltammetry

In this paper, a pre‐anodized carbon paste electrode (PACPE) is fabricated by a simple electrochemical pretreatment method, which can be used for the simultaneous determination of uric acid (UA) and ascorbic acid (AA). The influencing mechanism of the acidity on the size of oxidation peak current (i_p,a) of UA and AA is discussed in detail. According to the results, in different pH conditions, the intensity of hydrogen bonding between UA, AA and the surface of PACPE, the degree of reduction reaction at the auxiliary electrode, and the structural configurations of UA and AA with different species in reaction system have evident influence on the size of oxidation peak current. In pH 7.00 phosphate buffer solution, the calibration curves for UA and AA are obtained in the range of 5.0 x 10^‐7–5.0 x 10^‐5 mol/L and 3.0 x 10^‐5–5.0 x 10^‐3 mol/L, respectively. The detection limits for UA and AA are found to be 2.0 x 10^‐8 mol/L and 1.2 x 10^‐6 mol/L, respectively. This proposed method has been successfully applied to determine UA and AA in human urine simultaneously with satisfactory results.     

Determination of benzene,toluene, ethylbenzene,and xylenes in urine by purge and trap gas chromatography

A method for determination of benzene, toluene, ethylbenzene, and xylenes (BTEX) in urine is described. Determination is performed by dynamic headspace (purge and trap) gas chromatography with photoionization detection. The features of the described method, i.e. detection limits of 15–35 ng L^–1, relative standard deviations of 0.2–10%, accuracy of 80–100%, removal of interference of many compounds present in urine, sharp chromatographic peaks because of cryogenic refocusing, no sample preparation, make it convenient for biological monitoring of exposure to low levels of BTEX. However, the method is time‐consuming and sophisticated.     

Effects of variation in modulator temperature during cryogenic modulation in comprehensive two‐dimensional gas chromatography

Many modulation systems in comprehensive 2D GC (GC×GC) are based on cryogenic methods. High trapping temperatures in these systems can result in ineffective trapping of the more volatile compounds, whilst temperatures that are too low can prevent efficient remobilisation of some compounds. To better understand the trapping and release of compounds over a wide range of volatilities, we have investigated a number of different constant temperature modulator settings, and have also examined a constant temperature differential between the cryo‐trap and the chromatographic oven. These investigations have led us to modify the temperature regulation capabilities of the longitudinally modulated cryogenic system (LMCS). In contrast to the current system, where the user sets a constant temperature for the cooling chamber, the user now sets the temperature difference between the cryo‐trap and the chromatographic oven. In this configuration, the cooling chamber temperature increases during the chromatographic run, tracking the oven temperature ramp. This produces more efficient, volatility‐dependent modulation, and increases the range of volatile compounds that can be analysed under optimal trap‐and‐release conditions within a single analytical run. This system also reduces cryogenic fluid consumption.     

Infrared ion spectroscopy inside a mass‐selective cryogenic 2D linear ion trap

We demonstrate operation of the first cryogenic 2D linear ion trap (LIT) with mass‐selective capabilities. This trap presents a number of advantages for infrared ion “action” spectroscopy studies, particularly those employing the “tagging/messenger” spectroscopy approach. The high trapping efficiencies, trapping capacities, and low detection limits make 2D LITs a highly suitable choice for low‐concentration analytes from scarce biological samples. In our trap, ions can be cooled down to cryogenic temperatures to achieve higher‐resolution infrared spectra, and individual ions can be mass selected prior to irradiation for a background‐free photodissociation scheme. Conveniently, multiple tagged analyte ions can be mass isolated and efficiently irradiated in the same experiment, allowing their infrared spectra to be recorded in parallel. This multiplexed approach is critical in terms of increasing the duty cycle of infrared ion spectroscopy, which is currently a key weakness of the technique. The compact design of this instrument, coupled with powerful mass selection capabilities, set the stage for making cryogenic infrared ion spectroscopy viable as a bioanalytical tool in small molecule identification.     

Speciation Analysis of Thallium by Reversed‐phase Liquid Chromatography ‐ Inductively Coupled Plasma Mass Spectrometry

An inductively coupled plasma mass spectrometer (ICP‐MS) was used as a liquid chromatographic detector for the speciation analysis of thallium in environmental samples. In this study, ionic thallium species, namely Tl(I) and Tl(III) were well separated by reversed‐phase high performance liquid chromatography (RP‐HPLC) with a C8‐HPLC column as the stationary phase and 1 mmol L^?1 tetrabutylammonium phosphate (TBAP), 2 mmol L^?1 diethylenetriamine pentaacetic acid (DTPA) in 1% v/v methanol solution (pH 6) as the mobile phase. Effluent from the HPLC column was delivered to the nebulizer of the ICP‐MS for the determination of thallium. The separation was complete in less than 3 min. Detection limit was 0.002 μg L^?1 for both Tl(I) and Tl(III) compounds based on peak height. The relative standard deviation of the peak areas for five injections of a mixture containing 1 μg Tl L^?1 was better than 3.4%. The concentrations of Tl compounds were determined in standard reference materials, including NIST SRM 1643e Trace Elements in Water and NRCC NASS‐5 Open Ocean Seawater and water samples collected in Kaohsiung area, Taiwan. The HPLC‐ICP‐MS results of the reference samples agreed with the reference values. This method has also been applied to determine Tl(I) and Tl(III) compounds in custard apple (Annona squamosa) leaves collected from Chai‐shan Mountain, Kaohsiung and Taitung City, Taiwan. The thallium species were quantitatively leached from the leaves with a 5 mmol L^?1 DTPA in 100 mmol L^?1 ammonium acetate solution in an ultrasonic bath during a period of 30 min. The HPLC‐ICP‐MS result that was obtained after the analysis of leaves sample showed a satisfactory agreement with the total thallium concentration obtained by ICP‐MS analysis of completely dissolved sample.