Synthesis and characterization of anhydride-functional polycaprolactone

Polycaprolactone-graft-maleic anhydride (PCL-g-MA) copolymer was prepared by grafting maleic anhydride onto PCL in a batch mixer and in an extruder using dicumyl peroxide as the initiator. The graft content was determined with the volumetric method by converting the anhydride functions to acid groups and then titrating with ethanolic potassium hydroxide. The grafted polymer was extracted with xylene to remove any unreacted monomer before the estimation step. The effect of temperature and the various concentrations of the initiator and monomer used for the grafting reaction were investigated. The presence of residual initiator in the reaction product was checked using thin-layer chromatography. Molecular weight determination was carried out for the pure and grafted polymer using gel permeation chromatography to determine if chain scission was present. Results indicate that maleic anhydride is grafted onto PCL using free radical initiators. The grafting reaction was confirmed by FTIR and NMR techniques. FTIR spectra showed absorption bands around 1785 and 1858 cm⁻¹. NMR spectra gave signals for methine proton at 3.47 ppm. For a given peroxide level, a higher temperature or residence (reaction) time gave higher percentage of grafted MA. There was an optimum temperature and initiator concentration after which the percentage of MA grafted on PCL decreased. The number-average molecular weight, tensile strength, and the percent elongation of PCL-g-MA were comparable to those of PCL before grafting. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1139–1148, 1997     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Dual monomer grafting of styrene and maleic anhydride onto model hydrocarbon substrates

Styrene and maleic anhydride (MAn) were successfully grafted, alone and simultaneously, onto various model hydrocarbon substrates at 180 °C with 2,5‐dimethyl‐2,5‐di‐(t‐butyl peroxy)hexane (L101) as a free‐radical initiator. Dodecane, 1‐dodecene, and 2,6,10,14‐tetramethylpentadecane were selected as model compounds to investigate the effects of terminal unsaturation and branching on grafting and crosslinking. These compounds were chosen to mimic the aforementioned microstructural characteristics that are commonly observed in polyethylene. The results demonstrate that terminal unsaturation increases the amount of crosslinked material in the presence of L101. With respect to grafting, for the single monomer systems, MAn prefers to graft as single saturated units, whereas styrene prefers to graft as long chains of polystyrene oligomers. However, when both monomers are grafted simultaneously, graft yields are drastically reduced because of a propensity for the two monomers to form a styrene–maleic anhydride copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2456–2468, 2000     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Synthesis of maleic anhydride grafted polyethylene and polypropylene,with controlled molecular structures

This article discusses a new chemical route to prepare maleic anhydride (MA) grafted polyethylene and polypropylene polymers with controlled molecular structure, that is, MA grafted content and polymer molecular weight and composition distributions. The chemistry involves a free radical graft reaction of maleic anhydride with poly(ethylene‐co‐p‐methylstyrene) and poly(propylene‐co‐p‐methylstyrene) copolymers. Under a suspension reaction condition, the grafting reaction takes place selectively on the p‐methylstyrene units in the copolymer, due to high reactivity of p‐methyl group and favorable mixing between p‐methylstyrene units and chemical reagents in the swollen amorphous phases. The resulting polymer shows no detectable molecular weight change during the reaction, and the MA grafted content increases with the increase of initiator and p‐methylstyrene concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1337–1343, 2000     

Graft polymerization of epoxide and alternating graft copolymerization of epoxide–acid anhydride onto a polystyrene backbone having an aminimide moiety

Graft polymerization of glycidyl phenyl ether (GPE) and alternating graft copolymerization of GPE–succinic anhydride (SA) onto a polymer‐supported aminimide were examined. The polymer‐supported aminimide was synthesized by radical polymerization of 1,1‐dimethyl‐1‐(2‐hydroxy‐3‐(4‐vinylbenzyloxy)propyl)amine 2‐benzoylimide, which was prepared by the reaction of methyl benzoate with equimolar amounts of 1,1‐dimethyl hydrazine and 4‐glycidylmethylstyrene. This aminimide could initiate the polymerization of GPE and alternating copolymerization of GPE with SA to give the corresponding graft copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1041–1048, 1999     

Synthesis and characterization of functional aliphatic copolyesters

Functional aliphatic copolyesters of succinic acid (SA) and citric acid (CA) were synthesized via direct copolycondensation in the presence of 1,4‐butanediol, with titanium(IV) butoxide as a catalyst. The effects of the comonomer and comonomer ratio on the polycondensation and the melting and glass‐transition temperatures were investigated. The melting temperature was very sensitive to the molar ratio of the SA–CA comonomer units. The chain extension of this poly(butylene succinate citrate) was carried out with hexamethylene diisocyanate. The intrinsic viscosity, crystallinity percentage, and rheological properties of these copolyesters were also studied. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3232–3239, 2002     

Synthesis and characterization of fully aromatic thermotropic liquid‐crystalline copolyesters containing m‐hydroxybenzoic acid units

A series of fully aromatic copolyesters based on p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA), terephthalic acid (TPA), and m‐acetoxybenzoic acid (m‐ABA) were prepared by a modified melt‐polycondensation reaction. The copolyesters were characterized by DSC, thermogravimetric analysis, ¹H NMR, polarized optical microscopy, X‐ray diffraction, and intrinsic viscosity measurements. The copolyesters exhibited nematic liquid‐crystalline phases in a broad temperature range of about 150 °C, when the content of linear (p‐ABA, HQDA, and TPA) units was over 67 mol %. DSC analysis of the anisotropic copolyesters revealed broad endotherms associated with the nematic phases, and the melting or flow temperatures were found to be in the processable region. The flow temperatures and crystal‐to‐nematic and nematic‐to‐isotropic transitions depend on the type of linear monomer units, and these transitions increased as the content of the p‐ABA units increased, as compared to the HQDA/TPA units. When the content of the p‐ABA units increased, as compared to other linear units (HQDA and TPA), the intrinsic viscosity and degree of crystallinity of the copolyesters also increased, implying a higher reactivity for p‐ABA in the p‐ABA/HQDA/TPA/m‐ABA polymer system. The aromatic region in the ¹H NMR spectra of the copolyesters containing equal molar compositions of p‐ABA, HQDA, and TPA units were sensitive to the sequence distribution of aromatic rings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3263–3277, 2001     

Synthesis,isolation, and thermal behavior of polybutadiene grafted with poly(2,3,4,5,6‐pentafluorostyrene)

2,3,4,5,6‐Pentafluorostyrene (PFS) was copolymerized with polybutadiene (PB) in tetrahydrofuran using benzoyl peroxide as the initiator at 50, 60, and 80 °C. The copolymerizations follow typical radical polymerization kinetics and behavior. The grafting parameters were evaluated as a function of monomer conversion, initiator concentration, and/or temperature by gel permeation chromatography of directly injected copolymerization mixtures. The grafting efficiencies and grafting ratios are most consistent with a system that terminates by combination and whose graft sites are generated by hydrogen abstraction of allylic radicals by primary initiator radicals. Pure graft copolymers were isolated by extracting unreacted PB into hexanes and PPFS homopolymer into acetone. The similarity of the glass transition temperatures of the PPFS grafts and the corresponding extracted PPFS homopolymers confirms that their lengths are approximately equal. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2874–2891, 2005     

Hydrophilic PET surfaces by aminolysis and glycopolymer brushes chemistry

Poly(ethylene terephthalate) (PET) is a semiaromatic thermoplastic polyester used in many fields. For specific applications, controlled of the surface wettability (hydrophily/hydrophoby) could be a great challenge. Aminolysis of PET surfaces with branched polyethylenimine gives amino functional groups on the surface with high grafting density. Then, in a second step, atom transfer radical polymerization (ATRP) initiator was grafted by reaction with 2‐bromoisobutyryl bromide. Surface initiated ATRP of 2‐lactobionamidoethyl methacrylate (LAMA) was performed in solution in the presence of a sacrificial initiator or an appropriate amount of Cu(II) species that act as deactivator. The efficiency of all reactions was confirmed by X‐ray photoelectron spectroscopy. Wetting properties and surface energy were found to vary systematically depending to the type of functionalization and grafting. The quantity of grafted carbohydrate was determined by phenol/sulfuric acid colorimetric titration. The sugar graft density was observed to vary according to the ratio (monomer)/(free initiator). High graft density could be obtained yielding to superhydrophilic polymer brushes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2689–2697     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Synthesis and chemical structural analysis of nitroxyl‐radical‐incorporated poly(acrylic acid/lactide/ϵ‐caprolactone) copolymers

The goal of this research is to synthesize biodegradable polymers that would have nitroxyl radical biological functions. Linear aliphatic polyesters were chosen as the starting materials. The hydroxyl‐terminated polylactide/?‐caprolactones (PBLC‐OHs) were first synthesized by melt ring‐opening copolymerization in the presence of benzyl alcohol and stannous octoate. PBLC‐OHs were used as the precursor for the synthesis of double bond‐functionalized polylactide/?‐caprolactones (PBLC‐Mas) by reacting the hydroxyl end groups of PBLC‐OH with maleic anhydride in melt at 130 °C. Acrylic acid/lactide/?‐caprolactone graft copolymers (PBLCAs) were then successfully carried out by the radical copolymerization of acrylic acid and PBLC‐Ma initiated by azobisisobutyronitrile. Finally, nitroxyl radicals [4‐amino‐2,2,6,6‐tetramethylpiperidine‐1‐oxy (TAM)] were incorporated into the carboxylic acid sites of the acrylic acid/lactide/?‐caprolactone copolymer (TAM‐PBLCA) by reacting TAM with PBLCA in the presence of N,N′‐carbonyl diimidazole. A high content of TAM was incorporated into the PBLCA copolymer. The polymers synthesized were characterized by ¹H and ¹³C NMR, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectra. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4214–4226, 2001     

Solvothermal process for grafting maleic anhydride onto poly(ethylene 1-octene)

Solvothermal process was developed to graft maleic anhydride (MAH) onto poly(ethylene 1-octene) (POE). Fourier transform infrared spectra (FT-IR) and ¹H NMR spectra confirmed that maleic anhydride was successfully grafted onto the POE. The influences of MAH content, initiator concentration, POE concentration, reaction temperature, reaction time and solvents on the graft copolymerization were investigated through both of the grafting degree (GD) and gel content (GC). The results demonstrated that high grafting degree (up to 10.85%) could be obtained while the gel content was still low. Further studies revealed that POE-g-MAH could also be achieved in poor solvents of POE through this method.     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Synthesis of gold–poly(methyl methacrylate) core–shell nanoparticles by surface‐confined atom transfer radical polymerization at elevated temperature

Surface‐confined atom transfer radical polymerization was used to prepare gold nanoparticle–poly(methyl methacrylate) core–shell particles at elevated temperature. First, gold nanoparticles were prepared by the one‐pot borohydride reduction of tetrachloroaurate in the presence of 11‐mercapto‐1‐undecanol (MUD). MUD‐capped gold nanoparticles were then exchanged with 3‐mercaptopropyltrimethoxysilane (MPS) to prepare a self‐assembled monolayer (SAM) of MPS on the gold nanoparticle surfaces and subsequently hydrolyzed with hydrochloric acid. The extent of exchange of MUD with MPS was determined by NMR. The resulting crosslinked silica‐primer layer stabilized the SAM of MPS and was allowed to react with the initiator [(chloromethyl)phenylethyl] trimethoxysilane. Atom transfer radical polymerization was conducted on the Cl‐terminated gold nanoparticles with the CuCl/2,2′‐bipyridyl catalyst system at elevated temperature. The rates of polymerization with the initiator‐modified gold nanoparticles exhibited first‐order kinetics with respect to the monomer, and the number‐average molecular weight of the cleaved graft polymer increased linearly with the monomer conversion. The presence of the polymer on the gold nanoparticle surface was identified by Fourier transform infrared spectroscopy and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3631–3642, 2005     

Synthesis and characterization of fully biobased poly(propylene succinate‐ran‐propylene adipate). Analysis of the architecture‐dependent physicochemical behavior

Fully biobased aliphatic random poly(1,3‐propylene succinate‐ran‐1,3‐propylene adipate) (PPSA) copolyesters with high molar mass were synthesized with different macromolecular architectures based on various succinic acid/adipic acid (SA/AA) molar ratio, by transesterification in melt. Titanium (IV) isopropoxide was used as an effective catalyst. All synthesized copolyesters were fully characterized by different chemical and physicochemical techniques including NMR, size exclusion chromatography, FTIR, wide angle X‐ray scattering, differential scanning calorimetry, and thermogravimetric analysis. The final copolyesters molar compositions were identical to the feed ones. The different sequences based on succinate and adipate segments were randomly distributed along the chains. All the corresponding copolyesters showed an excellent thermal stability with a degradation onset temperature higher than 290 °C, which increased with the adipate content. According to their compositions and architectures, PPSA copolyesters can exhibit or not a crystalline phase, at room temperature. T_g of copolyesters decreased with the adipate content due to the decrease in the chains mobility, following the Gordon–Taylor relation. PPSA showed a pseudo eutectic melting behavior characteristic of an isodimorphic character. Finally, PPSA copolyesters were not able to crystallize during the cooling or the second heating run, due to the 1,3‐propanediol chemical structure, which led to amorphous materials with the exception of the polyester based solely on AA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2738–2748     

Head-to-head vinyl polymers. XI. Preparation and characterization of poly(methyl acrylate) and poly(methyl methacrylate) consisting of head-to-head and head-to-tail units through cyclopolymerization of acrylic and methacrylic anhydrides

Acrylic anhydride (AAn) and methacrylic anhydride (MAAn) were polymerized with radical initiator in polar solvents at high temperatures. The polymers obtained were found to consist of five-and six-membered ring structures by comparing IR spectra of the polymers with those of model compounds, succinic anhydride, and glutaric anhydride. Hydrolysis and methylation of the polymers gave new polymers composed of head-to-head (HH) and head-to-tail (HT) methyl acrylate (MA) or methyl methacrylate (MMA) units. The content of HH unit of these HH/HT polymers was determined by ¹H-NMR and ¹³C-NMR spectra. The softening, glass transition, and thermal degradation temperatures of the poly(MA) with HH and HT units were found to somewhat increase with increasing of the content of the HH units. On the other hand, the glass transition and thermal degradation temperatures of the poly(MMA) with HH and HT units increased similarly, but the softening temperature decreased as the content of the HH units increased.     

Synthesis and characterization of fully aliphatic polyimides from an aliphatic dianhydride with piperazine spacer for enhanced solubility,transparency, and low dielectric constant

A new series of fully aliphatic polyimide (API) based on a novel aliphatic dianhydride monomer‐2,2′‐(1,4‐piperazinediyl)‐disuccinic anhydride (PDA), in which two units of succinic anhydride have been connected by an aliphatic heterocyclic piperazine spacer that possesses aminomethylene (‐NCH₂) moiety in the aliphatic/alicylic backbone capable of inducing charge transfer (CT) interactions in the polyimide network, was successfully synthesized. The APIs were soluble in common polar organic solvents. The polyimide films of PDA with alicyclic diamines were almost colorless. T₁₀ (temperature of 10% weight loss) of APIs were ranged from 299–418 °C and T_g of API3‐API6 were in the temperature range of 170 to 237 °C. The light‐colored polyimide films of API3‐API6 possessed good mechanical properties with tensile strength of 54–72 Mpa, tensile modulus of 1.6–2.3 Gpa and elongation at break of 4–9%. The polyimide films of API3‐API6 were highly flexible and free‐standing which is quite rare in fully APIs. The dielectric constant of one of the synthesized API (API4) was as low as 2.14. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2316–2328     

Radical copolymerization of cyclic diarsine with vinyl monomers

1,2,4,5‐Tetramethyltetrahydrodiarsenine ( 1 ), a cyclic diarsine compound, was stirred with styrene and a catalytic amount of 2,2′‐azobisisobutyronitrile (AIBN) as a radical initiator at 80 °C for 8 h in toluene to give a copolymer containing arsenic atoms in the backbone. The gel permeation chromatography (GPC) chromatogram of the copolymer showed a single peak. The number‐average molecular weight of the copolymer was estimated to be more than 10,000 by GPC analysis (CHCl₃, polystyrene standards). The structure of the copolymer was confirmed by the ¹H NMR and ¹³C NMR spectra. According to the integral ratio of peaks in the ¹H‐NMR spectrum, the content of 1 in the copolymer was smaller compared to the monomer feed ratio of 1 . Radical copolymerization of 1 with methyl methacrylate also provided the corresponding copolymer in the presence of AIBN, whereas copolymerization with vinyl acetate yielded no polymeric material. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3023–3028, 2004     

Preparation of a copolymer of methyl methacrylate with a new monomer, 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate,and its initiation of the graft copolymerization of styrene with a controlled radical mechanism

A copolymer [P(MMA‐co‐TBPM)] was prepared by the radical polymerization of methyl methacrylate (MMA) and 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate (TBPM) with azobisisobutyronitrile as an initiator. TBPM was a new monomer containing an activated ester. Both the copolymer and TBPM were characterized with NMR, IR, and gel permeation chromatography in detail. It was confirmed that P(MMA‐co‐TBPM) could initiate the graft polymerization of styrene by the cleavage of the activated ester of the TBPM segment. This process was controllable, and the molecular weight of the graft chain of polystyrene increased with the increment of conversion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4398–4403, 2002