Synthesis and characterization of new cross-linked terpolymer systems containing silyl group

A series of acrylic terpolymers containing silyl pendant groups was prepared by free radical cross-linking copolymerization. Me₃Si, Et₃Si and t-BuMe₂Si together with cubane-1, 4-dicarboxylic acid (CDA) were covalently linked with 2-hydroxyethyl methacrylate (HEMA). The silyl-linked HEMA are abbreviated as TMSiEMA, TESiEMA and TBSiEMA respectively. Cubane-1, 4-dicarboxylic acid (CDA) linked to two HEMA group is the cross-linking agent (CA). Free radical cross-linking terpolymerization of the methyl methacrylate (MMA) and methacrylic acid (MAA) with two different molar ratios of organosilyl monomers and CA was carried out at 60–70 ^∘C. The compositions of the cross-linked three-dimensional polymers were determined by FT-IR spectroscopy. The glass transition temperature (Tg) of the network polymers was determined calorimetrically. The Tg of network terpolymers increases with increasing of cross-linking degree. Equilibrium swelling studies were carried out in enzyme-free simulated gastric and intestinal fluids (SGF and SIF, respectively). The gels swelled more in SIF than in SGF. The swelling behaviour of the copolymers was dependent on the content of MAA groups and caused a decrease in gel swelling in pH 1 or an increase in gel swelling in pH 7.4. Based on the great difference in swelling ratio at pH 1 and 7.4 for P-1, P-6 and P-10 appear to be good candidates for colon-specific drug delivery.     

Synthesis and characterization of new polymer systems containing very bulky tris(trimethylsilyl)methyl substituents as side chains

The 4-chloromethyl styrene (CMS) was copolymerized with different styrenic monomers such as methyl styrene, 4-methoxy styrene and α-methyl styrene by free radical polymerization method at 70 ± 1 °C using α,α^′-azobis(isobutyronitrile) (AIBN) as an initiator and the copolymers I, II and III collected respectively. The very bulky tris(trimethylsilyl)methyl {trisyl} substituents were covalently attached to the obtained copolymers with replacement of all the chlorine atoms in CMS units. The polymers, obtained in quantitative yields, were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopy; differential scanning calorimetry (DSC) and GPC studies. All the polymers containing trisyl groups showed a high glass transition temperature (in the range 150-190 °C) in comparison with copolymers I-III (in the range 90-95 °C). The increase of the glass transition temperature reflects the substantial increase in rigidity of new polymers bearing very bulky substituents in side chains.     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Efficient route to well‐characterized homo,block, and statistical polymers containing terpyridine in the side chain

The incorporation of metal–ligand interactions into macromolecules imparts to them unique and potentially useful properties. We report the synthesis of homo, block, and statistical copolymers with controlled molecular weights, compositions, and relatively narrow polydispersities via atom transfer radical polymerization that contain activated esters for the subsequent incorporation of terpyridine. This approach is universal and allows facile access to macromolecules with rich chemical functions, illustrated here with metal ligands. Comonomers include methyl, n‐butyl, and poly(ethylene glycol) methyl ether methacrylate as well as styrene. The addition of lanthanide ions to the final copolymers generates emissive materials with blue, green, red, or purple light, depending on the metal used. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5831–5843, 2005     

Synthesis of optically active polymers bearing amino acid moieties by atom transfer radical polymerization

We report here an approach toward the synthesis of optically active polyacrylamide bearing amino acid moieties, poly[N- methacryloyl L-leucine methyl ester] (PMALM), with controlled average number molecular weight (Mn) and relatively narrow polydispersity index (PDI, Mw/Mn < 1.3) by atom transfer radical polymerization (ATRP) using initiating system methyl 2- bromopropionate/CuBr/tris(2-dimethylaminoethyl) amine. The optical properties of the resulting polymers were evaluated fromspecific optical rotation value and CD spectra.     

Synthesis and characterization of macrocyclic vinyl aromatic polymers

The synthesis and characterization by size exclusion chromatography, liquid chromatography, NMR, matrix‐assisted laser desorption/ionization, thermal analysis, and other techniques of well‐defined and narrow molecular weight distribution macrocyclic polystyrene (PS), poly(2‐vinylpyridine), poly(α‐methylstyrene), poly (2‐vinyl‐naphthalene) (P2VN), and poly(9,9‐dimethyl‐2‐vinylfluorene) (PDMVF) containing a single 1,4‐benzylidene, methylidene, or 9,10‐anthracenylidene unit are reviewed. The absorption and emission spectroscopy of PS, P2VN, and PDMVF is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2139–2155, 2006     

Synthesis and thermal,optical, and mechanical properties of sequence‐controlled poly(1‐adamantyl acrylate)‐block‐poly(n‐butyl acrylate) containing polar side group

We prepared the sequence‐controlled block copolymers including poly(1‐adamantyl acrylate) (PAdA) and poly(n‐butyl acrylate) sequences as the hard and soft segments, respectively, by the organotellurium‐mediated living radical polymerization. The thermal, optical, and mechanical properties of the adamantane‐containing block copolymers with polar 2‐hydroxyethyl acrylate (HEA) and acrylic acid (AA) repeating units were investigated. The microphase‐separated structures of the block copolymers were confirmed by the differential scanning calorimetry and atomic force microscopy observations as well as dynamic mechanical measurements. The α‐ and β‐dispersions due to the main‐chain and side group molecular motions, respectively, of the hard and soft segments were observed. Their transition temperatures and activation energies increased due to the formation of intermolecular hydrogen bonding by the introduction of the HEA and AA repeating units. The effects of the hydrogen bonding on their tensile elasticity, strength, and strain were also evaluated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2899–2910     

Synthesis and characterization of amphiphilic triblock copolymers by iron‐mediated atom transfer radical polymerization

The atom transfer radical polymerization of methyl methacrylate (MMA) and n‐butyl methacrylate (n‐BMA) was initiated by a poly(ethylene oxide) chloro telechelic macroinitiator synthesized by esterification of poly(ethylene oxide) (PEO) with 2‐chloro propionyl chloride. The polymerization, carried out in bulk at 90 °C and catalyzed by iron(II) chloride tetrahydrate in the presence of triphenylphosphine ligand (FeCl₂ · 4H₂O/PPh₃), led to A–B–A amphiphilic triblock copolymers with MMA or n‐BMA as the A block and PEO as the B block. A kinetic study showed that the polymerization was first‐order with respect to the monomer concentration. Moreover, the experimental molecular weights of the block copolymers increased linearly with the monomer conversion, and the molecular weight distribution was acceptably narrow at the end of the reaction. These block copolymers turned out to be water‐soluble through the adjustment of the content of PEO blocks (PEO content >90% by mass). When the PEO content was small [monomer/macroinitiator molar ratio (M/I) = 300], the block copolymers were water‐insoluble and showed only one glass‐transition temperature. With an increase in the concentration of PEO (M/I = 100 or 50) in the copolymer, two glass transitions were detected, indicating phase separation. The macroinitiator and the corresponding triblock copolymers were characterized with Fourier transform infrared, proton nuclear magnetic resonance, size exclusion chromatography analysis, dynamic mechanical analysis, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5049–5061, 2005     

Synthesis and thermal crosslinking reaction of polymers containing pendant carboxyl and epoxy groups

Polymers containing both pendant carboxyl and epoxy groups were synthesized by the radical copolymerization of p-vinylbenzyl glycidyl ether (VBGE) and itaconic acid monomethyl ester (IAME). The copolymerization proceeded smoothly under various conditions, and polymer soluble in 1,4-dioxane with no gel fraction was obtained. However, the carboxyl-epoxy addition reaction between VBGE and IAME was observed, when DMSO or DMF were used as polymerization solvents. The IR and ¹H-NMR spectrum of copolymers of VBGE and IAME showed the corresponding structure. The thermal crosslinking reaction of the resulting copolymers was examined under various conditions. Tetrabutylammonium bromide (TBAB) showed catalytic activity for the reaction. However, a 100% gel fraction of polymer was achieved after only 15 min without any catalyst, when the crosslinking reaction was performed at 150°C. © 1996 John Wiley & Sons, Inc.     

Side‐chain ferrocene‐containing (meth)acrylate polymers: Synthesis and properties

A comprehensive investigation on the synthesis and properties of a series of ferrocene‐containing (meth)acrylate monomers and their polymers that differ in the linkers between the ferrocene unit and the backbone was carried out. The side‐chain ferrocene‐containing polymers were prepared via atom transfer radical polymerization. The kinetic studies indicated that polymerization of most monomers followed a “controlled”/living manner. The polymerization rates were affected by the vinyl monomer structures and decreased with an increase of the linker length. Methacrylate polymerization was much faster than acrylate polymerization. The optical absorption of monomers and polymers was affected by the linkers. Thermal properties of these polymers can be tuned by controlling the length of the linker between the ferrocene unit and the backbone. By increasing the length of the linker, the glass transition temperature ranged from over 100 to ?20 °C. Electrochemical properties of both monomers and polymers were characterized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Living/controlled cationic cyclopolymerization of divinyl ether with a cyclic acetal moiety: Synthesis of poly(vinyl ether)s with high glass transition temperature based on incorporation of cyclized main chain and cyclic side chains

Cationic cyclopolymerization of 2‐methyl‐5,5‐bis(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a divinyl ether with a cyclic acetal group, was investigated with the HCl/ZnCl₂ initiating system in toluene and methylene chloride at ?30 °C. The reaction proceeded quantitatively to give gel‐free, soluble polymers in organic solvents. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion, and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that the polymerization proceeded in living/controlled manner. The contents of the unreacted vinyl groups in the produced soluble polymers were less than ～3 mol %, and therefore, the degree of cyclization was determined to be ～97%. In contrast, the pendant cyclic acetal groups remained intact in the polymers under the present cationic polymerization conditions. These facts show that cyclopolymerization of 1 almost exclusively occurred and the poly(vinyl ether)s with the cyclized repeating units and cyclic pendant acetal rings were obtained. Glass transition temperature (T_g) and thermal decomposition temperature (T_d) of poly( 1 ) (M_n = 7870, M_w/M_n = 1.57) were found to be 166 and 338 °C, respectively, indicating that poly( 1 ) had high T_g and high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 952–958, 2010     

Atom transfer radical polymerization of styrene and methyl methacrylate catalyzed by FeCl2/iminodiacetic acid

The atom transfer radical polymerization of styrene and methyl methacrylate with FeCl₂/iminodiacetic acid as the catalyst system in bulk was successfully implemented at 70 and 110 °C, respectively. The polymerization was controlled: the molecular weight of the resultant polymer was close to the calculated value, and the molecular weight distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight ∼ 1.5). Block copolymers of polystyrene‐b‐poly(methyl methacrylate) and poly(methyl methacrylate)‐b‐poly(methyl acrylate) were successfully synthesized, confirming the living nature of the polymerization. A small amount of water added to the reaction system increased the reaction rate and did not affect the living nature of the polymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4308–4314, 2000     

Synthesis and characterization of copolymaleimides containing 4‐cyanobiphenyl‐based side groups for nonlinear optical applications

We report the synthesis of a nematic copolymer, P(CBMS‐co‐M₃), prepared by free radical polymerization of an equimolecular mixture of p‐(4‐cyanobiphenyl‐4′‐yloxy)methylstyrene (CBMS) and N‐[3‐(4‐cyanobiphenyl‐4′‐yloxy)propyl]maleimide (M₃) and two isotropic alternating copolymers, P(S‐alt‐M_n) (n = 3,6) prepared by chemical modification of poly(styrene‐alt‐maleimide), P(S‐alt‐M), by n‐(4‐cyanobiphenyl‐4′‐yloxy)alkan‐1‐ol. These copolymaleimides were characterized by NMR, DSC, and optical microscopy. Some corona poling experiments were performed and the second harmonic coefficients d₃₁ and d₃₃ were measured. It was shown that one can gain in net polar ordering by starting with a liquid crystalline system. The ratio d₃₃/d₃₁ was much larger than 3, in agreement with the molecular statistical models for electric field poling of liquid crystals. At ambient conditions, changes of d₃₃ and d₃₁ are 15% over 325 days. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 513–524, 1999     

Effect of phenol and derivatives on atom transfer radical polymerization in the presence of air

The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (M_w/M_n < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004     

Synthesis and polymerization of chiral methacrylates bearing a cholesteryl or menthyl group

Chiral methacrylates, that is, cholesteryl (ChMOC) and l‐menthyl (MnMOC) N‐(2‐methacryloyloxyethyl)carbamates, were synthesized from 2‐methacryloyloxyethyl isocyanate and cholesterol and l‐menthol, respectively. Radical polymerizations of ChMOC and MnMOC gave number‐average molecular weights for poly(ChMOC) and poly(MnMOC) of up to 3.74 × 10⁴ and 9.39 × 10⁴, respectively, and the specific rotations ([α]) were −43.1° to −47.7° and −87.6° to −89.0°, respectively. Temperature dependence of the specific optical rotation was observed for poly(ChMOC) but not for poly(MnMOC). The hydrogen bonds based on urethane segments for poly(ChMOC) were stronger than those for poly(MnMOC) according to IR spectra. In addition, the chiroptical properties of poly(ChMOC) were slightly affected by temperature in the presence of trifluoroacetic acid acting as an inhibitor for the formation of hydrogen bonds. Therefore, poly(ChMOC) may have a regular conformation due to hydrogen bonds and interaction between cholesteryl groups. Radical copolymerizations of ChMOC with styrene, methyl methacrylate, N‐cyclohexylmaleimide, and N‐phenylmaleimide were performed with 2,2′‐azobisisobutyronitrile in tetrahydrofuran at 60 °C. Monomer reactivity ratios and Alfrey–Price Q–e were determined. Chiroptical properties of the copolymers were influenced by co‐units. Thermal and X‐ray diffraction analyses were performed for the homopolymers and copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4315–4325, 2000     

Synthesis of polymers containing donor-acceptor Schiff base in side chain for nonlinear optics

The Schiff bases 4-(ω-hydroxyalkyloxy)-N-(5-nitro-2-thienylmethylene)aniline with 2, 6 and 8 methylenic units in their alkyl group in which a nitrothienyl group as acceptor and an oxyphenyl group as donor were synthesized by condensation of (ω-hydroxyalkyloxy)anilines with 5-nitro-2-thiophenecarboxaldehyde. The methacrylate monomers 4-(ω-methacryloyloxyalkyloxy)-N-(5-nitro-2-thienylmethylene)aniline with alkylene groups of different lengths were synthesized by two different routes and polymerized using a free radical initiator to produce low molecular weight polymers useful for nonlinear optics. All the obtained compounds were characterized by conventional spectroscopic methods. First-order hyperpolarizability (β) of 4-(2-hydroxyethyloxy)-N-(5-nitro-2-thienylmethylene)aniline typically was calculated using semiempirical method and the nonlinear optic properties of the same compound was studied by second harmonic generation.     

Synthesis and characterization of polymaleimides containing 4-cyanobiphenyl–based side groups for nonlinear optical applications

A new homologous series of SCLCPs containing the 4-cyanobiphenyl mesogenic group attached to the polymaleimide backbone through paraffinic spacers of two to eight methylene units have been prepared. All the polymers exhibit liquid crystalline behavior; specifically S_Ad- (or S_C-) like and nematic phases are observed. The glass transition temperature decreases from 150 to 43°C on increasing spacer length. The isotropization temperatures exhibit an odd–even effect on varying the length and parity of the spacer, in which the odd members exhibit the higher values. This is attributed to the change in the average shape of the side chain as the parity of spacer is varied. The isotropization temperatures (>300–120°C) and the mesophase thermal stabilities (190–60°C) are high. Comparison is made with polymers containing the same mesogenic group attached to backbones of decreasing rigidity. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2531–2546, 1998     

Star‐shaped polymers by Ru(II)‐catalyzed living radical polymerization. II. Effective reaction conditions and characterization by multi‐angle laser light scattering/size exclusion chromatography and small‐angle X‐ray scattering

Star poly(methyl methacrylate)s (P*) of various arm lengths and core sizes were synthesized in high yields by the polymer linking reaction in Ru(II)‐catalyzed living radical polymerization. The yields of the star polymers were strongly dependent on the reaction conditions and increased under the following conditions: (1) at a higher overall concentration of arm chains ([P*]), (2) with a larger degree of polymerization (DP) of the arm chains (arm length), and (3) with a larger ratio (r) of linking agents to P* (core size). In particular, the yields sharply increased in a short time at a higher temperature, in a polar solution, and at a higher complex concentration after the addition of linking agents. These star polymers were then analyzed by multi‐angle laser light scattering to determine the weight‐average molecular weight (3.8 × 10³ to 1.5 × 10⁶), the number of arm chains per molecule (f = 4–63), and the radius of gyration (R_z = 2–22 nm), which also depended on the reaction conditions (e.g., f and R_z increased as [P*], DP, and r increased). Small‐angle X‐ray scattering analyses of the star polymers showed that they consisted of spheres for which the radius of the microgel core was 2.7 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2245–2255, 2002     

Synthesis and characterization of halogen-containing ferroelectric liquid crystals and side chain liquid crystalline polymers

A new series of ferroelectric liquid crystals and side chain liquid crystalline polymers based on halogen-containing chiral centres has been synthesized. Chemical structures were analysed by NMR. Liquid crystal phases were characterized by differential scanning calorimetry, optical polarizing microscopy, and X-ray diffractometry. The behaviour of the liquid crystalline phases was investigated as a function of spacer units and differing terminal asymmetric moieties. It was found that phase transition temperatures decreased with increasing length of the oligooxyethylene spacer unit. Differing terminal asymmetric moieties led to differing mesophase phenomena. Furthermore, a wide temperature range (including room temperature) of a chiral smectic C phase was achieved.