Spontaneous alternating copolymerization of N-phenylmaleimide with ethyl α-phenylacrylate

The spontaneous copolymerization of N-phenylmaleimide (NPMI) (M₁) with ethyl α-phenylacrylate (EPA)(M₂) were carried out in dioxane at 85°C. A high alternating tendency was observed. The monomer reactivity ratios were r₁ = 0.07 ±0.01 and r₂ = 0.09 ± 0.02. The maximum copolymerization rate and molecular weight occurs at 70–80 mol% (M₁) in feed ratio. The spontaneous alternating copolymerization is considered to be carried out via a contact-type charge transfer complex (CTC) formed between the monomers. Thermogravimetric analyses (TGA) indicate the resulting copolymers have high thermal stability. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2927–2931, 1998     

Synthesis of Graft Polymers by Copolymerization of Macromonomers. II. Copolymerization Kinetics of Styrene-and Methacrylate-Terminatedpoly(2-Acetoxyethyl Methacrylate) Macromonomers

Styrene-terminated poly(2-acetoxyethyl methacrylate) macromonomer (EBA), methacrylate-terminated poly(2-acetoxyethyl methacrylate) macromonomer (MPA), and methacrylate-terminated poly(methyl methacrylate) macromonomer (MPM) were synthesized and subjected to polymerization and copolymerization by a free-radical polymerization initiator (AIBN). EBA and MPA were homopolymerized at various concentrations. EBA exhibited higher reactivity than styrene. The reactivity of MPA, however, was almost equal to that of glycidyl methacrylate. Cumulative copolymer compositions were determined by GPC analysis of copolymerization products. The reactivity ratios estimated were r_a = 0.95 and r_b , = 0.90 for EBA macromonomer (a)-methyl methacrylate (b) copolymerization. These values were not consistent with literature values for the styrene-methyl methacrylate and p-methoxy-styrene-methyl methacrylate systems. The reactivity ratios estimated for MPA and 2-bromoethyl methacrylate were r_a - 0.95 and r_b , = 0.98; equal to the glycidyl methacrylate-2-bromoethyl methacrylate system. MPA or MPM was also copolymerized with styrene, and the reactivity ratios were r_a = 0.40, r_a = 0.60 and r_a = 0.39, r_a = 0.58, respectively. These estimates were in good agreement with the reactivity ratios for glycidyl methacrylate and styrene. Thus, no effect of molecular weight was observed for both copolymerization systems.     

Free‐radical copolymerization of vinyl esters using fluoroalcohols as solvents: The solvent effect on the monomer reactivity ratio

Free‐radical copolymerizations of vinyl acetate (VAc = M₁) and other vinyl esters (= M₂) including vinyl pivalate (VPi), vinyl 2,2‐bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) with fluoroalcohols and tetrahydrofuran (THF) as the solvents were investigated. The fluoroalcohols affected not only the stereochemistry but also the polymerization rate. The polymerization rate was higher in the fluoroalcohols than in THF. The accelerating effect of the fluoroalcohols on the polymerization was probably due to the interaction of the solvents with the ester side groups of the monomers and growing radical species. The difference in the monomer reactivity ratios (r₁, r₂) in THF and 2,2,2‐trifluoroethanol was relatively small for all reaction conditions and for the monomers tested in this work, whereas r₁ increased in the VAc‐VF6Pi copolymerization and r₂ decreased in the VAc‐VPi copolymerization when perfluoro‐tert‐butyl alcohol was used as the solvent. These results were ascribed to steric and monomer‐activating effects due to the hydrogen bonding between the monomers and solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 220–228, 2000     

Copolymerization of styrene and butadiene with Ni(acac)2-methylaluminoxane catalyst

Copolymerization of styrene (St) and butadiene (Bd) with nickel(II) acetylacetonate [Ni(acac)₂]-methylaluminoxane (MAO) catalyst was investigated. Among the metal acetylacetonates [Mt(acac)_x] examined, Ni(acac)₂ showed a high activity for the copolymerization of St and Bd giving copolymers having high cis-1,4-microstructure in Bd units in the copolymer. The effect of alkylaluminum as a cocatalyst on the copolymerization of St and Bd with the Ni(acac)₂-MAO catalyst was observed, and MAO was found to be the most effective cocatalyst for the copolymerization. The monomer reactivity ratios for the copolymerization of St and Bd with the Ni(acac)₂-MAO catalyst were determined to be r_St = 0.07 and r_Bd = 3.6. Based on the obtained results, it was presumed that the random copolymers with high cis-1,4-microstructure in Bd units could be synthesized with the Ni(acac)₂-MAO catalyst without formation of each homopolymer. The polymerization mechanism with the Ni(acac)₂-MAO catalyst was also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3838–3844, 1999     

COMPLEXATION OF METAL IONS WITH 3,5-DI-TERT-BUTYL-1,2-BENZOQUINONE-1-MONOOXIME,ESR STUDIES OF RADICAL INTERMEDIATES

Abstract

The possibility of chelate formation of 3,5-di-terf-butyl-o-benzoquinone-1-monooxime with Cu(II), Co(II), Ni(II), Mn(II), Pd(II) metal ions under N₂ and in air have been investigated. It was found that complexation of metals except Cu(II) and Mn(II) was accompanied by formation of various stable radical species under air. The complexation of Co(II) even under N₂ unlike other metal ions, results in the formation of very stable radical species, which are assigned to phenazinyl type radical. ESR examination of reduction of bis(3,5-di-tert-butyl-o-benzoquinone-1-monooximato)M(II) (M = Cu, Pd) with triarylphosphines P(C₆H₄ X)₃ (X = H, m-Cl, m-CH₃, p-Et₂N) reveal the formation of the N-(2′-hydroxy-3,5-di-tertbutylphenyl)-4′,6′-di-tertbutyl-o-benzosemiquinone iminate radical. Finally, ESR spectra of Cu(II), Ni(II), and Mn(II) complexes at 300 and 130 K, as well as reaction of bis(oximato)Ni(II) with PPh₃ have been studied.     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Synthesis and radical polymerization of 2-vinyldibenzothiophene

A monomer having dibenzothiophene moiety, 2-vinyldibenzothiophene (1), was prepared by the Ni-catalyzed cross-coupling reaction of vinyl bromide with the Grignard reagent of 2-bromodibenzothiophene. The radical homopolymerization of 1 and the copolymerization with styrene were carried out at 60°C in toluene (1.0M) for 20 h using AIBN (5 mol %) as an initiator to obtain the corresponding polymers in high yields. Thermal analyses of the copolymers showed that both 10% weight loss and glass transition temperatures increase when increasing the content of 1 unit. The monomer reactivity ratio was evaluated as r₁ = 2.55 (1) and r₂ = 0.16 (styrene). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2813–2819, 1997     

Synthesis and characterization of novel crosslinkable polymers with a nonlinear optical chromophore as a pendant group

New crosslinkable polymers with a nonlinear optical (NLO) active chromophore as a pendant group were synthesized by condensation chain polymerization via palladium‐catalyzed carbon–carbon coupling reactions. The polymerization yields were almost quantitative between the diiodobenzene (DIB) and diethyldipropargyl malonate (DEDPM) or 4‐(dimethylamino)‐4′‐(6‐dipropargylacetoxypropylsulfonyl)stilbene (DASS‐6) monomers. To improve the molecular weight and mechanical properties of the NLO active polymer, we carried out the copolymerization with DIB and DASS‐6 with various feed ratios of DEDPM. The resulting polymers were soluble in organic solvents and spun‐cast onto indium tin oxide‐coated glass substrates to make thin films. The molecular structures of the resulting polymers were characterized with various instrumental methods to confirm the carbon–carbon coupling reactions between the DIB and diacetylene monomers. The absorption of the ultraviolet–visible spectrum of the resulting polymers was drastically reduced after thermal curing at 160 °C because of the crosslinking of the reactive acetylene group in the polymer backbone. The electrooptic coefficient (r₃₃) measured at 1.3 μm ranged from 7 to 15 pm/V. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4025–4034, 2001     

Radical polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate

The polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate (BDMPI) with benzoyl peroxide (BPO) in N,N-dimethylformamide (DMF) was studied kinetically by ESR. The polymerization rate (R_p) at 70°C was given by R_p = k[BPO]^0.78[BDMPI]^1.1. The overall activation energy of polymerization was determined to be 83.7 kJ/mol. The number-average molecular weight of poly(BDMPI) was in the range of 1500–2000 by gel permeation chromatography. From the ESR study, the polymerization system was found to involve ESR-observable propagating radicals of BDMPI under practical polymerization conditions. Using the polymer radical concentration by ESR, the rate constants of propagation (k_p) and termination (k_t) were determined in the temperature range of 50–70°C. The k_p value seemed dependent on the chain-length of propagating radical. The analysis of polymers by the MALDI-TOF mass spectrometry suggested that most of the resulting polymers contain the dimethylamino terminal group. The copolymerization of BDMPI (M₁) and styrene (M₂) at 50°C in DMF gave the following copolymerization parameters; r₁ = 0.49, r₂ = 0.26, Q₁ = 1.2, and e₁ = +0.63. The thermal behavior of poly(BDMPI) was examined by dynamic thermogravimetry and differential scanning calorimetry. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1891–1900, 1997     

Copolymerization of vinylidene difluoride with hexafluoropropene in supercritical carbon dioxide

Vinylidene difluoride and hexafluoropropene are copolymerized in supercritical carbon dioxide at 280 bar and 50 °C by means of free radical copolymerization, initiated by diethyl peroxydicarbonate. The first stages of the reaction were monitored by turbidity measurements and the time/conversion curve was followed gravimetrically to measure the initial rates of polymerization. The obtained copolymers possessed bimodal molecular weight distributions, their average comonomer composition was well described by the Lewis‐Mayo equation with the copolymerization parameters r_VDF = 4.8 and r_HFP = 0. The glass transition and melting temperatures of the copolymers are similar to that of the materials resulting from aqueous emulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1299–1316, 2006     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Quantifying and Controlling the Composition and ‘Randomness’ Distributions of Random Copolymers

The effect of disparity in the reactivity ratios of monomer pairs on the composition distribution and microstructure of the resultant copolymer formed through free‐radical polymerization is quantified computationally. This correlation has been determined for the monomer pairs of styrene/methyl methacrylate and styrene/2‐vinyl pyridine for a variety of monomer feed ratios. These monomer pairs were chosen as they represent systems that have been utilized to experimentally examine the importance of copolymer architecture on its ability to compatibilize an immiscible polymer blend. Moreover, their respective random copolymers show conflicting results for this examination. The results of this work show that the difference in the reactivity ratios of styrene and 2‐vinyl pyridine copolymer (r₁ = 0.5, r₂ = 1.3) significantly broadens the composition and randomness distribution of the resultant copolymer. This breadth is not easily avoided as it evolves even in the early stages of the copolymerization. Conversely, for the styrene/methyl methacrylate pair, the reactivity ratios are similar (r₁ = 0.46, r₂ = 0.52) and this results in a copolymer with a narrow composition distribution and sequence distribution dispersion. Stopping the polymerization at early conversion further narrows both distributions. The presented results, therefore, provide fundamental information that must be considered when planning an experimental procedure to evaluate the relative importance of sequence distribution and composition distribution of a random on its application.     

Radical copolymerization of acrylonitrile with 2,2,2‐trifluoroethyl acrylate for dielectric materials: Structure and characterization

Radical copolymerization based on acrylonitrile (AN) and 2,2,2‐Trifluoroethyl acrylate (ATRIF) initited by AIBN was investigated in acetonitrile solution. The resulting poly(AN‐co‐ATRIF) copolymers were characterized by ¹H, ¹³C, and ¹⁹F NMR and IR spectroscopy, and size exclusion chromatography (SEC). Their compositions were assessed by ¹H NMR. The kinetics of radical copolymerization of AN with ATRIF was investigated from sereval experiments achieved at 70 °C from initial [AN]₀/[ATRIF]₀ molar ratios ranging between 20/80 and 80/20 and was enabled to determine the reactivity ratios of both comonomers. From the monomer—polymer copolymerization curve, the Fineman–Ross and Kelen–Tüdos laws enabled to assess the reactivity ratios (r_AN= r₁ = 1.25 ± 0.04 and r_ATRIF = r₂ = 0.93 ± 0.05 at 70 °C) while the revised patterns scheme led to r₁₂ = r_AN = 1.03, and r₂₁ = r_ATRIF = 0.78 at 70 °C. In all cases, r_AN x r_ATRIF product was close to unity, which indicates that poly(AN‐co‐ATRIF) copolymers exhibit a random structure. This was also confirmed by the Igarashi's and Pyun's laws which revealed the presence of AN‐ATRIF, AN‐AN, and ATRIF‐ATRIF dyads. The Q and e values for ATRIF were also assessed (Q₂ = 0.62 and e₂ = 0.93). The glass transition temperature values, T_g, of these copolymers increased from 17 to 61 °C as the molar percentage of ATRIF decreased from 77 to 16% in the copolymer. Thermogravimetry analysis of poly(AN‐co‐ATRIF) copolymers showed a good thermal stability compared to that of poly(ATRIF) homopolymer due to incorporation of AN comonomer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3856–3866     

Homo- and copolymerization of butadiene and styrene with neodymium tricarboxylate catalysts

Homo- and copolymerizations of butadiene (BD) and styrene (St) with rare-earth metal catalysts, including the most active neodymium (Nd)-based catalysts, have been examined, and the cis-1,4 polymerization mechanism was investigated by the diad analysis of copolymers. Polymerization activity of BD was markedly affected not only by the ligands of the catalysts but also by the central rare-earth metals, whereas that of St was mainly affected by the ligands. In the series of Nd-based catalysts [Nd(OCOR)₃:R = CF₃, CCl₃, CHCl₂, CH₂Cl, CH₃], Nd(OCOCCl₃)₃ gave a maximum polymerization activity of BD, which decreased with increasing or decreasing the pKa value of the ligands. This tendency was different from that for Gd(OCOR)₃ catalysts, where the CF₃ derivative led to the highest polymerization activity of BD. For the polymerization of St and its copolymerization with BD, the maximum activities were attained at R = CCl₃ for both Nd- and Gd-based catalysts. The copolymerization of BD and St with Nd(OCOCCl₃)₃ catalyst was also carried out at various monomer feed ratios, to evaluate the monomer reactivity ratios as r_BD = 5.66 and r_St = 0.86. The cis-1,4 content in BD unit decreased with increasing St content in copolymers. From the diad analysis of copolymers, it was indicated that Nd(OCOCCl₃)₃ catalyst controls the cis-1,4 structure of the BD unit by a back-biting coordination of the penultimate BD unit. Furthermore, the long range coordination of polymer chain by the neodymium catalyst was suggested to assist the cis-1,4 polymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 241–247, 1998     

Vinylhydroquinone. IV. Preparation and polymerization behavior of 2-methyl-5-vinylhydroquinone derivatives

As in the case of vinylhydroquinone (I), its alkyl-substituted derivative, 2-methyl-5-vinylhydroquinone (II) was found to copolymerize with methyl methacrylate by tri-n-butylborane in cyclohexanone at 30°C. II was prepared from the O,O′-bisether compound, 2-methyl-5-vinyl-O,O′-bis(1′-ethoxyethyl)hydroquinone (III). The monomer reactivity ratios (M₂ = II) were determined to be r₁ = 0.37 and r₂ = 0. No homopolymerization proceeded under the same conditions. Ordinary free-radical initiators, such as azobisisobutyronitrile and benzoyl peroxide, were not effective in the homopolymerization of II. 1:1 Copolymers were obtained from II and maleic anhydride by using tri-n-butylborane as an initiator. The copolymers exhibited no definite melting range and decomposed at 370–375°C endothermally (DSC). The polymerization behavior of III was also investigated. Although tri-n-butylborane did not initiate the homopolymerization of the monomer, azobisisobutyronitrile was capable of initiating the homopolymerization and copolymerization of III. The monomer reactivity ratios (M₁ = styrene) were determined to be r₁ = 0.83 and r₂ = 0.18. The ratios gave the following Q and e values; Q = 0.15 and e = ?2.2.     

STUDY ON COPOLYMERIZATION OF ACRYLAMIDE WITH STYRENE INITIATED BY METHYL ETHYL KETONE AND ITS DERIVATIVES IN COMPARISON WITH CONVENTIONAL RADICAL INITIATOR

Copolymerization of acrylamide (AAm) with styrene (St) was carried out in the presence of methyl ethyl ketone (MEK), methyl isopropyl ketone (MIK) and t-butyl methyl ketone (tBMK) without any conventional initiator in tetrahydrofuran (THF) at 60°C. The copolymerization of AAm with St proceeded readily in the presence of the MEK, MIK, and tBMK, while no copolymerization of AAm with St proceeded in the absence of these ketones under the same conditions and no homo-polymerization of St proceeded even in the presence of the ketones. The reactivity ratio of monomer AAm (r₁) is smaller than that of St (r₂) in all of the copolymerization systems, and increases as the order: MEK < MIK < tBMK. The conversion of the copolymerizations increases as the same order described above. The interaction between AAm and the ketones with hydrogen bonding was estimated by the shifts of the absorption bands of the amide carbonyl and N-H groups in the infrared spectra. From the results of the copolymerization between AAm and St, the greater the shift in the N-H absorption, the higher the amount of AAm found in the copolymer.     

Kinetic and ESR studies on radical copolymerization of p-tert-butoxystyrene and di-n-butyl maleate in benzene

The copolymerization of p-tert-butoxystyrene (TBOSt) (M₁) and di-n-butyl maleate (DBM) (M₂) with dimethyl 2,2′-azobisisobutyrate (MAIB) in benzene at 60°C was studied kinetically and by means of ESR spectroscopy. The monomer reactivity ratios were determined to be r₁ = 2.3 and r₂ = 0 by a curve-fitting method. The copolymerization system was found to involve ESR-observable propagating polymer radicals under practical copolymerization conditions. The apparent rate constants of propagation (k_p) and termination (k_t) at different feed compositions were determined by ESR. From the relationship of k_p and f₁ (f₁ = [M₁]/([M₁] + [M₂])) based on a penultimate model, the rate constants of five propagations of copolymerization were evaluated as follows; k₁₁₁ = 140 L/mol s, k₂₁₁ = 3.5 L/mol s, k₁₁₂ = 61 L/mol s, k₂₁₂ = 1.5 L/mol s, and k₁₂₁ = 69 L/mol s. Thus, a pronounced penultimate effect was predicted in the copolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1449–1455, 1998     

Transformation of copolymerization mechanism of N-phenyl maleimide and ethyl phenylacrylate in the mixture of dioxane and pyridine

The copolymerization of N-phenylmaleimide (NPMI) with ethyl phenylacrylate (EPA) in a mixture of dioxane (DIO) and pyridine (Py) was investigated. The apparent monomer reactivity ratio r₁ (NPMI) = 0.07 ± 0.01 and r₂ (EPA) = 0.09 ± 0.02 in DIO was turned to r₁ (NPMI) = 3.67 ± 0.07 and r₂ (EPA) = 0 ± 0.03 in Py. The copolymerization of NPMI and EPA with the fixed feed ratio (mol/mol 1 : 1) in different volume ratio of DIO/Py showed that the copolymer composition might be varied in a wide range from the 93.5% of NPMI contents in copolymer to 48.7%. When the volume fraction of Py in the mixture of DIO and Py was <10%, the copolymer with nice alternating structure was obtained and the copolymerization could be inhibited completely by hydroquinone; if the fraction of Py was >10%, the following two kinds of copolymers were formed: a copolymer in which the content of NPMI increased with the Py and the copolymerization also could be inhibited by hydroquinone and a copolymer with low molecular weight almost completely composed of homopolymer of NPMI and is not affected by radical inhibitor as hydroquinone. The transformation of the copolymerization mechanism from the radical to anionic, which was dependent on the volume ratio of DIO and Py, was suggested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2755–2761, 1999     

Quantitative Determination of the Contribution of Charge‐Transfer Complex in the Microemulsion Copolymerization of N‐Butyl Maleimide and Styrene

By using sodium dodecyl sulfate (SDS) and pentanol (PTL) as emulsifiers, the oil‐in‐water microemulsion containing N‐butyl maleimide (NBMI, M₁) and styrene (St, M₂) was prepared. The microemulsion copolymerization using potassium persulfate (KPS) as an initiator was investigated. On the basis of kinetic model proposed by SHAN Guo‐Rong, the reactivity ratios of free monomers and the charge‐transfer complex (CTC) in the copolymerization were found to be r₁₂ = 0.0420, r₂₁ = 0.0644, r_1C = 0.00576 and r_2C = 0.00785, respectively. A kinetic treatment based on this model was used to quantitatively estimate the contribution of CTC to the total copolymerization rate in the NBMI/St copolymerization. It was about 17.0–20.0% for a wide range of monomer feed ratios.     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003