Synthesis of some novel heteroarylene ethynylene polymers containing 1,10-phenanthroline in the polymer backbone

Palladium-catalyzed polycondensation between 3,8-dibromo-1,10-phenanthroline and substituted phenyl-1,4-diacetylenes in the presence of diisopropylamine produced the soluble π-conjugated poly(heteroarylene ethynylene)s 7a and 7b . The polymers were obtained in high yields (86–92%) and had molecular weights of M̄_n = 8700 g · mol⁻¹ ( 7a ; vapor pressure osmometry) and 6900 g · mol⁻¹ ( 7b ; vapor pressure osmometry). The low molecular model compounds 6a and 6b were prepared to analyze the connection between the primary structure and spectroscopic properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4442–4448, 1999     

Soluble poly(amide–imide)s prepared by one‐pot solution condensation

A new one‐pot procedure for imide–acid monomer synthesis and polymerization is reported for four new poly(amide–imide)s. Bisphenol A dianhydride (BPADA) was reacted with twice the molar amount of 3‐aminobenzoic acid (3ABA) or 3‐amino‐4‐methylbenzoic acid (3A4MBA) in 1‐methyl‐2‐pyrrolidinone (NMP) and toluene mixture, and the amic acid intermediates cyclized in solution to give two diimide‐containing dicarboxylic acid monomers. Without isolation, the diacid monomers were then polymerized with either 1,3‐diaminomesitylene (DAM) or 1,5‐diaminonaphthalene (1,5NAPda) using triphenyl phosphite‐activation to give a series of four soluble poly(amide–imide)s, PAI. Isolation and purification of the dicarboxylic acid monomers was not necessary for formation of high molecular weight polymers as indicated by intrinsic viscosities of 0.64–1.04 dL/g determined in N,N‐dimethylacetamide (DMAc). All of the PAI were soluble in polar aprotic solvents such as NMP, DMAc, and dimethyl sulfoxide (DMSO). Glass transition temperatures ranged from 243 to 279°C by DSC, and 5% weight loss temperatures were above 400°C in both air and nitrogen. Flexible films cast from DMAc were light yellow, transparent, and tough. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1183–1188, 1999     

Electrochemical behavior of a new electroactive polyimide derived from aniline trimer

The electrochemical behavior of a soluble polyimide (Tani-polyimide) derived from an aniline trimer was investigated. Similar to processes observed in polyaniline, two typical redox processes involving protonation and ion insertion were observed. Due to the presence of an isolated, short quinonediimine or N,N′-diphenyl-p-phenylenediamine segment, Tani-polyimide displayed an electroactivity at higher potentials and did not undergo an electrochemical degradation reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4295–4301, 1999     

Adsorption of bovine serum albumin onto poly(methyl methacrylate) stereocomplex films with a molecularly regulated nanostructure

Stereoregular poly(methyl methacrylate)s (PMMAs) were stepwise assembled on a quartz crystal microbalance (QCM) substrate after the immersion of the QCM into alternating acetonitrile solutions at ambient temperature. A quantitative QCM analysis at each step showed stereocomplex formation on the substrate surface. The adsorption of bovine serum albumin (BSA) onto stereocomplex films with a molecularly regulated nanostructure was analyzed quantitatively. The adsorption constant and the maximum adsorption amount, calculated by the assumption of Langmuir‐type adsorption, showed that BSA adsorbed with a relatively weak interaction onto the stereocomplex films. The BSA adsorption onto the stereocomplex films occurred in an end‐on manner, with a smaller adsorption constant than for that onto individual spin‐coated films. The amount of BSA adsorbed was significantly affected by the molecular weight of syndiotactic PMMA. Attenuated total reflection spectra indicated that BSA adsorbed onto the films with or without denaturing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1807–1812, 2003     

QCM sensing of a chemical nerve agent analog via electropolymerized molecularly imprinted polythiophene films

The highly selective and sensitive detection of a chemical nerve agent analog pinacolyl methylphosphonate (PMP) was demonstrated using an electrochemically molecularly imprinted polymer (MIP) polythiophene film onto a quartz crystal microbalance (QCM) transducer surface. The fabrication and optimization of the sensor film was monitored by in situ electrochemistry‐QCM (EC‐QCM) measurements, which determined the change in mass and simultaneous change in redox properties of the polymer film. The film deposition, template loading, and template removal were evidenced by a combination of surface characterization techniques such as the attenuated total reflection infrared spectroscopy and high‐resolution X‐ray photoelectron spectroscopy. The fabricated MIP film demonstrated a limit of detection and a limit of quantification of ～60 and ～197 μM, respectively. The linear sensing range is between 125 and 250 μM concentration of PMP. Finally, theoretical modeling (AM1 semiempirical quantum calculations) studies revealed that a stable prepolymerization complex is formed in solution with the existence of H‐bonding interactions using the 2:1 monomer‐to‐template ratio. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of aliphatic polyimides containing adamantyl units

Aliphatic polyimides containing adamantyl units (APIs) were prepared by the poly(addition/condensation) of a dianhydride bicyclo[2.2.2]octane-2,3,5,6-tetracarboxylic 2,3 : 5,6-dianhydride with a rigid diamine, 1,3-diaminoadamantane or 3,3′-diamino-1,1′-biadamantyl, and a flexible diamine, 4,4′-methylenebis(cyclohexylamine) or 1,4-cyclohexanediamine. One-step polymerizations were conducted at 80–200°C in m-cresol, producing APIs with inherent viscosities up to 0.53 dL g⁻¹. These APIs are soluble in haloalkanes, m-cresol, and sulfuric acid and show high thermal stability and excellent transparency. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3584–3590, 1999     

Proton transfer‐controlled anionic polymerization of methyl‐substituted β‐lactams with potassium t‐butoxide and subsequent coupling reaction with saccharides

The potassium t‐butoxide‐catalyzed ring‐opening polymerization of 3,3‐dimethyl‐ and 4,4‐dimethyl‐2‐azetidinone proceeds quantitatively in a mixture of N,N‐dimethylacetamide and 5–10 wt % of lithium chloride at 25°C to give the corresponding monodisperse polyamides. The addition of methyl α‐D ‐glucoside into the living polyamide system gives a novel polyamide linked with the glucose moiety at one chain end. A new graft copolymer composed of a water soluble polysaccharide (dextran) backbone and many monodisperse polyamide branches was also prepared by a similar coupling method. The difference in acidity among the lactam monomers, the corresponding polyamides, and the alcohols was essential for the attainment of such a proton transfer‐controlled system composed of the living polymerization and the subsequent coupling reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 909–915, 1999     

Synthesis and characterization of optically active aromatic polyimides derived from 2,2′-bis(2-trifluoro- 4-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

Optically active 2,2′-bis(2-trifluoro-4-aminophenoxy)-1,1′-binaphthyl and its corresponding racemate were prepared by a nucleophilic substitution reaction of 1,1′-bi-2-naphthol with 2-chloro-5-nitrotrifluorotoluene and subsequently by the reduction of the resulting dinitro compounds. A series of optically active and optically inactive aromatic polyimides also were prepared therefrom. These polymers readily were soluble in common organic solvents such as pyridine, N,N′-dimethylacetamide, and m-cresol and had glass-transition temperatures of 256 ∼ 278 °C. The specific rotations of the chiral polymers ranged from 167 ∼ 258°, and their chiroptical properties also were studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4536–4540, 1999     

Glycopolymeric inhibitors of β‐glucuronidase I. Synthesis and polymerization of styrene derivatives having pendant D‐glucaric moieties

Two kinds of novel vinyl monomers having D ‐glucaric moieties leading to a new type of glycopolymeric inhibitors of β‐glucuronidase, N‐p‐vinylbenzyl‐6‐D ‐glucaramide (6 ) and potassium N‐p‐vinylbenzyl‐6‐D ‐glucaramid‐1‐ate (8 ), were synthesized by the reaction of D ‐glucaro‐6,3‐lactone (3 ) with p‐vinylbenzylamine (5 ) with no catalyst, and the subsequent treatment of the reaction mixture with acetic anhydride and potassium hydroxide aqueous solution, respectively. The radical copolymerization of 8 with acrylamide in various feed ratios at 60°C in 0.1 N potassium chloride aqueous solution gave water‐soluble copolymers (9 ) composed of a synthetic polymeric main chain and many pendant D ‐glucaric chains. The resulting glycopolymers (9 ) were found to inhibit the activity of β‐glucuronidase strongly through a model reaction with p‐nitrophenyl β‐D ‐glucuronide (10 ) in acetic buffer solution (pH 4.7). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 303–312, 1999     

Water-soluble dendrimer–poly(ethylene glycol) starlike conjugates as potential drug carriers

The design and synthesis of a new dendrimer–poly(ethylene glycol) (PEG) conjugate that may be used as a model drug carrier are described. The starting material is a polyether dendrimer with two different types of chain end functionalities. The dendritic assembly is made water soluble through attachment of short PEG chains to the dendrimer via one type of functionality. The remaining chain end functionalities then were used to incorporate model drug molecules of varying polarity into the modified dendrimer. Cholesterol and two amino acid derivatives were selected as model drugs for attachment through their respective hydroxyl, carboxylic acid, and amino functional groups to the dendrimer via carbonate, ester, and carbamate linkages. The resulting water-soluble dendrimer-model drug conjugates were characterized by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3492–3503, 1999     

Molecular and supramolecular structures of complexes formed by polyelectrolyte‐surfactant interactions: effects of charge density and compositions

The process of complex formation and the structure of the complexes were studied for the surfactant binding of the N‐alkylpyridinium chlorides (C_nPyCl, n = 12, 16) to the sodium salt of poly(styrenesulfonate) (NaPS) and its copolymer with styrene. Both the NaPS and the amphiphilic copolymer form non‐stoichiometric complexes with an excess of the cationic surfactants. The NaPS‐complex with pronounced short‐range (d₁) and long‐range (d₂) orderings is insoluble, and the amphiphilic copolymer‐complex is water‐soluble when bound with extra charges. The mechanism of the complex formation was discussed in terms of the charge density and chemical composition of the polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 635–644, 1999     

Application of selective 1 : 2 addition of ketene N,N-acetal and isocyanates to novel polyamide syntheses

1,1-Bis(dimethylamino)ethylene (ketene N,N-acetal) (1) reacted with isocyanates to give either 1 : 1 adduct 3,3-bis(dimethylamino)acrylamides (3) or 1 : 2 adduct bis(dimethylamino)methylenemalonamides (4), depending on the amount of the charged isocyanate. 3 was obtained selectively in the case of isocyanate/1 = 1, while 4 was exclusively yielded in the case of isocyanate/1 = 2. Isothiocyanate showed similar reaction behavior as isocyanate. Polyaddition of 1 with diisocyanates afforded polyamides bearing a bis(dimethylamino)methylenemalonamide group with higher molecular weight. The obtained novel polyamides are soluble in various organic solvents, and reacted with diacid chloride to give crosslinked polymer quantitatively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3079–3086, 1999     

Tubular polypyrrole synthesized by in situ doping polymerization in the presence of organic function acids as dopants

Tubular polypyrrole (PPy) could be synthesized by in situ doping polymerization in the presence of β‐naphthalene sulfonic acid (NSA) as dopant. The resultant tubular PPy–NSA not only exhibits high room temperature conductivity (ς_RT = 10 S/cm) but is also soluble in m‐cresol. The molecular structure of PPy–NSA is identical to the characteristic structure of PPy synthesized by a conventional method. It has been demonstrated that NSA dopant with large molecular size and plate–lebe structure is a key factor to control formation of tubular PPy–NSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1443–1449, 1999     

Growth of polystyrene films via gas‐phase polymerization with [Pd(CH3CN)4][BF4]2 thin film catalyst

The heterogeneous catalytic polymerization of styrene vapor with a tetrakis(acetonitrile)palladium(II) tetrafluoroborate, [Pd(CH₃CN)₄][BF₄]₂, thin film has been demonstrated. The catalyst is deposited by nebulization of dilute solutions onto a quartz crystal microbalance (QCM) and then exposed to styrene vapor in controlled environments. The use of QCM allows in situ monitoring of catalyst deposition and polymer growth kinetics. The polymerization process appears to involve the entire catalyst film rather than polymerization only at the catalyst film surface. The styrene vapor polymerization occurs rapidly after a short induction time needed for monomer dissolution and catalyst activation. The narrow molecular weight distribution of the produced polymer suggests that the deposited film acts as a single site catalyst. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1930–1934, 2005     

Synthesis and characterization of soluble polyimides from 2,2-bis(4-aminophenyl)cycloalkane derivatives

New aromatic diamines [(1) and (2)] containing polycycloalkane structures between two benzene rings were synthesized by HCl-catalyzed condensation reaction of aniline hydrochloride and corresponding polycycloalkanone derivatives. The structures of diamines were identified by ¹H-NMR, ¹³C-NMR, FTIR spectroscopy, and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The inherent viscosities of the resulting polyimides were in the range of 0.34–1.02 dL/g. The polyimides showed good thermal stabilities and solubility. All the polymers were readily soluble in N-methyl-2-pyrrolidone, m-cresol, tetrachloroethane, etc. Some of them were soluble even in chloroform at room temperature. The glass transition temperatures were observed in the range of 323–363°C, and all of the polymers were stable up to 400°C under nitrogen atmosphere. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3449–3454, 1999     

Glassy polymer‐sorption phenomena measured with a quartz crystal microbalance technique

The quartz crystal microbalance (QCM) method is applied to the measurement of CO₂ sorption in glassy poly(ethylene terephthalate) (PET), poly(methyl methacrylate), and polysulfone. Polymer thin films in the thickness range of 350–550 nm are prepared by spin‐casting onto the quartz crystal devices. Sorption isotherms at temperatures below the glass transition are analyzed with the dual‐mode sorption model. As‐cast, quenched, and slow‐cooled thermal‐conditioning protocols yield consistent trends in the sorption level, namely, as‐cast > quenched > slow‐cooled. The sorption levels and model results for the quenched‐conditioned samples measured with QCM compare favorably with those reported from the pressure‐decay and gravimetric methods on thick films. With extended analysis of PET, the QCM technique is also useful for the exploration of the temperature dependence associated with gas sorption in glassy polymer systems. Measured heats of sorption and the collapse of the Langmuir component near the PET glass‐transition temperature agree with those reported previously. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2109–2118, 2003     

Monomers,polymers, copolymers,resins, and coated silicas containing benzylamine residues planned as artificial substrates of benzylamine oxidase

The new monomers 3-(3-methacryloxypropoxy)benzylamine and 4-(3-methacryloxypropoxy)benzylamine in the form of hydrochlorides have been synthesized and radically copolymerized under various conditions with comonomers of different hydrophilicity, including N-acryloylmorpholine, N-acryloylpyrrolidine, N,N-dimethylacrylamide, and N-vinylbenzoylmorpholine, to obtain linear soluble, granular crosslinked, and silica-based macromolecular systems designed for investigating the action mechanism of benzylamine oxidase. Some characteristics of the prepared materials, including scanning electron microscopy photographs, are reported. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3109–3118, 1999     

Synthesis and characterization of novel aromatic polyimides from 4,4‐bis(p‐aminophenoxymethyl)‐ 1‐cyclohexene

A novel diamine, 4,4‐bis(p‐aminophenoxymethyl)‐1‐cyclohexene (CHEDA), was synthesized from 4,4‐bis(hydroxymethyl)‐1‐cyclohexene and p‐chloronitrobenzene by nucleophilic aromatic substitution and subsequent catalytic reduction of the intermediate dinitro compound. A series of aromatic polyimides were prepared from CHEDA and commercial dianhydrides with varying flexibility and electronic character in two‐step direct polycondensation reactions. High molecular weight polyimides with intrinsic viscosities between 0.57 and 10.2 dL/g were obtained. Most of these polyimides, excluding those from PMDA and BPDA, were soluble in polar aprotic solvents such as NMP and DMAc, and many were also soluble in CHCl₃ and THF. DSC analysis revealed glass transitions in the range of 190 to 250°C. No significant weight losses occurred below 450°C in nitrogen and 350°C in air. Bromination and epoxidation of cyclohexene double bond in CHDEA–6FDA (3e) were investigated as examples of possible polymer modifications. Qualitative epoxidation and selective bromination of the double bond were demonstated. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1189–1197, 1999     

Head-to-tail regioregularity of poly(3-hexylthiophene) in oxidative coupling polymerization with FeCl3

We investigated a head-to-tail regioregularity of poly(3-alkylthiophenes) from 3-alkylthiophene by an oxidative coupling polymerization, which is the simplest and easiest way for the synthesis of polythiophenes. The polymerizations were conducted using ferric chloride (III) as an oxidant in chloroform. Investigating the polymerization conditions, a lower temperature and a lower concentration were effective for increasing the head-to-tail (HT) content. The best HT content of 88% was obtained when the temperature was −45°C and the initial monomer concentration was 0.02 mol L⁻¹. Washing the resulting polymer by n-hexane further increased the content to 91%. Thus, it was found that the high regioselectivity can be achieved by the simple polymerization and the simple operation such as washing. The polymerization mechanism causing the regularity is also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1943–1948, 1999     

Synthesis and characterization of poly(aryl amide imide)s derived from diphenyltrimellitic anhydride

The synthesis and characterization of a series of novel poly(aryl amide imide)s based on diphenyltrimellitic anhydride are described. The poly(aryl amide imide)s, having inherent viscosities of 0.39–1.43 dL/g in N-methyl-2-pyrrolidinone at 30°C, were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization. All the polymers were amorphous, readily soluble in aprotic polar solvents such as DMAC, NMP, dimethylsulfoxide, N,N-dimethylformamide, and m-cresol, and could be cast to form flexible and tough films. The glass transition temperatures were in the range of 284–366°C, and the temperatures for 5% weight loss in nitrogen were above 468°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4541–4545, 1999