Binding of uranyl ion by 2,2′-dihydroxyazobenzene attached to a partially chloromethylated polystyrene

A 2,2′-dihydroxyazobenzene (DHAB) derivative was attached to a chloromethylated cross-linked polystyrene derivative in view of high affinity of DHAB for uranyl ion. Chloromethyl groups of the resin were converted to quaternary ammonium ions by treating with tertiary amines. Capacity of the resins for uranyl-uptake was measured, revealing that about 20 mg of uranium can be complexed to 1 g of the resins. Formation constants (K_f) for uranyl complexes of the resins were determined. In the presence of >0.1 M bicarbonate ion at pH 8.10, log K_f of about 15 was obtained. As bicarbonate concentration was lowered, K_f decreased considerably. Degrees of uranyl-uptake from rapidly flowing uranyl solutions were measured, and the results suggested that rate of uranyl-uptake may not impose a major barrier to application of the resins in uranium extraction from seawater. Uranium extraction from seawater with the resins was carried out on the east coast of Korean peninsula. The amount of uranium extracted from seawater was about 10 µg/g resin. This is not satisfactory for economical processes of uranium recovery from seawater. Results of the present study, however, suggested that modification of the DHAB-containing resins can improve uranyl-binding ability, probably leading to economical recovery of uranium from seawater. In addition, simulation of uranyl-binding processes in seawater with the laboratory procedures developed in this study was satisfactory. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3169–3177, 1999     

Uranyl ion complexation of 2,2′-dihydroxyazobenzene enhanced on a backbone of poly(ethylenimine)

The formation constant (K_f) for the uranyl complex of 2,2′-dihydroxyazobenzene (DHAB) was measured with DHAB attached to poly(ethylenimine) (DHAB-PEI) at pH 7.7 to 9.4. The value of K_f was estimated from the equilibrium constant for extraction of uranyl ion from the uranyl complex of DHAB-PEI (UO₂DHAB-PEI) with carbonate ion, which in turn was measured from the absorbance change observed on addition of bicarbonate ion to the solution of UO₂DHAB-PEI. At pH 8.0, the uranyl-binding ability of DHAB was enhanced by about 10⁴ times on attachment of DHAB to PEI. The major origin of the increased ability of uranyl ion complexation is the basic local microenvironment of PEI, which encourages ionization of the phenol groups of DHAB. Various other possible origins are discussed also. The log K_f for DHAB-PEI at pH 8.0 indicates that DHAB moieties of DHAB-PEI are mostly occupied, whereas DHAB unattached to PEI is mostly unoccupied by uranyl ion under conditions of seawater when only the pH and concentrations of bicarbonate and uranyl ions of seawater are considered. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3936–3942, 1999     

Kinetics of 2,2′-Bipyridyl-Catalyzed Oxidation of Isopropyl Alcohol with Chromic Acid

2,2′-Bipyridyl and some substituted compounds catalyze effectively the oxidation of isopropyl alcohol by chromic acid. The reaction is first order in chromium(VI), alcohol and 2,2′-bipyridyl; it is first order in hydrogen ions at high acidity and slightly alters to second order at low acidity. The proposed mechanism shows that the rate-limiting step is mainly the decomposition of a termolecular complex to products. However, at low acidity, the formation step of this complex is a little less reversible and hence somewhat rate-limiting. Electron-donating substituents at the 4-position enhance the catalytic activity. Electron-withdrawing substituents at the 4- and 2-positions diminish the reaction rates by electronic and steric factors.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Styrene miniemulsion polymerization initiated by 2,2′-azobisisobutyronitrile

The effects of various parameters on the dodecyl methacrylate (DMA) or stearyl methacrylate (SMA) containing styrene miniemulsion polymerizations were investigated. These parameters include the type of initiators [2,2′-azobisisobutyronitrile (AIBN) vs. sodium persulfate (SPS)], the size of the homogenized monomer droplets, the AIBN concentration, and the SDS concentration. A small quantity of a water-insoluble dye was also incorporated into the polymerization system to study the related particle nucleation mechanisms. The oil-soluble AIBN promotes nucleation in the monomer droplets, whereas homogeneous nucleation predominates in the reaction system with the water-soluble SPS. Homogeneous nucleation, however, cannot be ruled out in the DMA or SMA containing polymerizations with AIBN as the sole initiator. Increasing the level of AIBN or SDS enhances formation of particle nuclei via homogeneous nucleation. The reaction kinetics is primarily controlled by the competitive events of monomer droplet nucleation and homogeneous nucleation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2537–2550, 1999     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Syntheses,Structures and Characterization of Four Metal‐Organic Frameworks constructed by 2,2′,6,6′‐Tetramethoxy‐4,4′‐biphenyldicarboxylic Acid

Four metal‐organic frameworks (MOFs), {[Mn_3.5L(OH)(HCOO)₄(DMF)] · H₂O} ( 1 ), {[In_2.5L₂O(OH)_1.5(H₂O)₂] · DMF · CH₃CN · 2H₂O} ( 2 ), {[Pb₄L₃O(DMA)] · CH₃CN} ( 3 ), and {[LaL(NO₃)(DMF)₂] · 2H₂O} ( 4 ) were synthesized by utilizing the ligand 2,2′,6,6′‐tetramethoxy‐4,4′‐biphenyldicarboxylic acid (H₂L) via solvothermal methods. All MOFs were characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, thermogravimetric analysis, and infrared spectroscopy. In 1 , the Mn²⁺ ions are interconnected by formic groups in situ produced via DMF decomposition to form a rare 2D macrocyclic plane, which is further linked by L^2– to construct the final 3D network. In 2 , 1D zip‐like infinite chain is formed and then interconnected to build the 3D framework. In 3 , a [Pb₆(μ₄‐O)₂(O₂C)₁₀(DMA)₂] cluster with a centrosymmetric [Pb₆(μ₄‐O)₂]⁸⁺ octahedral core is formed in the 3D structure. In 4 , the La³⁺ ions are connected with each other through carboxylate groups of L^2– to generate 1D zigzag chain, which is further linked by L^2– to construct a 3D network with sra topology. Solid photoluminescence properties of 3 and 4 were also investigated.     

Building Functionality into 4′‐Hydrazone Derivatives of 2,2′: 6′,2″‐Terpyridine

The syntheses of the five 2,2′: 6′,2″‐terpyridine (tpy) ligands 5 – 9 functionalized in the 4′‐position with a hydrazone substituent RR′C?N? NH (R=R′=Me; R=H, R′=4‐BrC₆H₄, 4‐O₂NC₆H₄, 4‐MeOC₆H₄, or 3,5‐(MeO)₂C₆H₃) are described. Protonation of the tpy domain of the ligands is facile. Solution behaviour has been studied by NMR and electronic spectroscopies. Representative structural data are presented for neutral and monoprotonated ligands, and illustrate that H‐bonding involving the formal amine NH unit is a dominant structural motif in all cases.     

Photophysical Processes in ‘Supramolecular Balls’ Formed by Lanthanide Chloride with 2,2′‐Bipyridine

The europium complex [EuCl₂(bpy)₂(H₂O)₂]Cl?1.25 C₂H₆O?0.37 H₂O, where bpy is 2,2′‐bipyridine, was synthesized and investigated with the aim to relate its molecular geometry and crystal packing to the efficiency of energy‐transfer processes. The presence of H‐bonds between noncoordinated Cl^? ions and coordinated H₂O molecules leads to the formation of discrete trimers assembled by a number of C? H???Cl and stacking interactions into ‘supramolecular balls’ which contain Cl^? ions and solvate molecules (H₂O and EtOH). The additional stabilization of the complex is due to intramolecular N???C interactions between two bpy ligands that causes some shortening of the Eu? N bonds. Deciphering the luminescence properties of the Eu complex was performed under consideration of both the composition of the inner coordination sphere and the peculiarities of the crystal packing. The influence of the latter and the bpy orientation on the energy of the ligand→Eu charge‐transfer state (LMCT) was established, and an additional excited state induced by the π‐stacking interaction (SICT) was identified.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Poly(3,3′-dimethoxy-2,2′-bithiophene): Synthesis and comparison with poly(3-methoxythiophene)

A new electroactive polymer, namely poly(3,3′-dimethoxy-2,2′-bithiophene) has been prepared by voltammetric polymerization of 3,3′-dimethoxy-2,2′-bithiophene. Due to a different coupling pattern (equivalent to “head-to-head,” and “tail-to-tail” coupled alkoxythiophene rings), poly(3,3′-dimethoxy-2,2′-bithiophene) exhibits different voltammetric properties than the corresponding “head-to-tail” coupled polymer, i.e., poly(3-methoxythiophene). Poly(3,3′-dimethoxy-2,2′-bithiophene) gives very sharp oxidation and reduction peaks indicating an abrupt insulator to conductor transition. This hypothesis was corroborated by the studies of relative resistance as a function of electrode potential. Sharper and better-defined redox peaks may indicate better stereoregularity of poly(3,3′-dimethoxy-2,2′-bithiophene) as compared to poly(3-methoxythiophene) since in this compound the 5,5′-coupling positions are geometrically equivalent and no coupling defects are expected. © 1992 John Wiley & Sons, Inc.     

Binding of uranyl ion by poly(ethylenimine) containing a salicylate derivative

Three molecules of 5-(bromoacetyl)salicylate ( 1 ) complexed to uranyl UO ion were crosslinked with branchy poly(ethylenimine) (PEI) in DMSO by alkylation of amino groups of PEI with 1, leading to the formation of UO₂(Sal) PEI. Upon demetalation of UO₂(Sal) PEI with HCl, apo(Sal) PEI was obtained. Based on the pH dependence of log K_f for UO₂(Sal) PEI, it was concluded that each uranyl binding site in UO₂(Sal) PEI or apo(Sal) PEI contains three salicylate moieties. In terms of the equilibrium constant for formation of the uranyl complex, apo(Sal) PEI was found to be comparable to or better than the previously reported effective uranophiles. In terms of the rates for the formation of the uranyl complex, however, apo(Sal) PEI was far superior to those other uranophiles. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2935–2942, 1997     

Dehydrogenative Synthesis of 2,2′‐Bipyridyls through Regioselective Pyridine Dimerization

2,2′‐Bipyridyls have been utilized as indispensable ligands in metal‐catalyzed reactions. The most streamlined approach for the synthesis of 2,2′‐bipyridyls is the dehydrogenative dimerization of unfunctionalized pyridine. Herein, we report on the palladium‐catalyzed dehydrogenative synthesis of 2,2′‐bipyridyl derivatives. The Pd catalysis effectively works with an Ag^I salt as the oxidant in the presence of pivalic acid. A variety of pyridines regioselectively react at the C2‐positions. This dimerization method is applicable for challenging substrates such as sterically hindered 3‐substituted pyridines, where the pyridines regioselectively react at the C2‐position. This reaction enables the concise synthesis of twisted 3,3′‐disubstituted‐2,2′‐bipyridyls as an underdeveloped class of ligands.