Nonlinear optical properties of some side chain copolymers based on benzoxazole containing chromophores

Acrylate‐methylmethacrylate copolymers have been synthesized for nonlinear optical applications. Acrylate monomer units are characterized by the presence in the side chain of phenylbenzoxazole groups containing electron donor‐electron acceptor substituents. The phase behavior of all polymers has been investigated by DSC, X‐ray diffraction and polarizing microscopy: two of them exhibit liquid crystalline behavior of smectic type. For four polymers, nonlinear optical properties have been examined by second harmonic generation measurements on thin films (∼ 1 μm thickness) electrically poled by corona discharge. Second order susceptibility coefficients d₃₃ and average relaxation times 〈τ〉, relative to the time stability of the chromophore poling, have been measured. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 603–608, 1999     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Revisions to the microstructural assignments of poly(ethyl cyanoacrylate)

The tacticity assignments from the literature for the ¹³C-NMR signals of the side-chain methylene group of poly(ethyl cyanoacrylate) are reversed, and new assignments of the main-chain methylene group are proposed. The assignments were made possible by a combination of DEPT and HETCOR NMR experiments on samples of varying microstructure distributions. The polymer tends toward syndiotacticity, not isotacticity as previously reported. The distribution of stereoisomers fits well to a Bernoulian statistical model. The stereochemical assignments were corroborated by similar analyses of a model compound for two cyanoacrylate repeat units. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2219–2224, 1999     

Electrically conductive transparent papers using multiwalled carbon nanotubes

We describe a novel class of electrically conductive transparent materials based on multiwalled carbon nanotubes (MWCNTs). Transparent nanocomposites were fabricated by incorporating an aqueous silk fibroin solution into bacterial cellulose membranes. The transparent nanocomposites had a high transmittance in the visible and infrared regions, regardless of the bacterial cellulose fiber content, due to the nanosize effect of the bacterial cellulose nanofibrils. This phenomenon allowed the preparation of a novel electrically conductive transparent paper. The high dispersity of the MWCNTs was realized by utilizing a bacterial cellulose membrane as a template to deposit them uniformly, thereby achieving electrically conductive transparent papers with outstanding optical transparency. The light transmittance and electrical conductivity varied according to the concentration of the MWCNT dispersion. Good optimal transparency and electrical properties were obtained with a light transmittance of 70.3% at 550 nm and electrical conductivity of 2.1 × 10^?3 S/cm when the electrically conductive transparent paper was fabricated from a 0.02 wt % aqueous MWCNT dispersion. In addition, the electrically conductive transparent papers showed remarkable flexibility without any loss of their initial properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1235–1242, 2008     

Microstructure and mechanical properties of hot‐air drawn poly(ethylene terephthalate) fibers

Hot‐air drawing method has been applied to poly(ethylene terephthalate) (PET) fibers in order to investigate the effect of strain rate on their microstructure and mechanical properties and produce high‐performance PET fibers. The hot‐air drawing was carried out by blowing hot air controlled at a constant temperature against an as‐spun PET fiber connected to a weight. As the hot air blew against the fibers weighted variously at a flow rate of about 90 ℓ/min, the fibers elongated instantaneously at a strain rate in the range of 2.3–18.7 s⁻¹. The strain rate in the hot‐air drawing increased with increasing drawing temperature and applied tension. When the hot‐air drawing was carried out at a drawing temperature of 220°C under an applied tension of 27.6 MPa, the strain rate was the highest value of 18.7 s⁻¹. A draw ratio, birefringence, crystallite orientation factor, and mechanical properties increased as the strain rate increased. The fiber drawn at the highest stain rate had a birefringence of 0.231, degree of crystallinity of 44%, tensile modulus of 18 GPa, and dynamic storage modulus of 19 GPa at 25°C. The mechanical properties of fiber obtained had almost the same values as those of the zone‐annealed PET fiber reported previously. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1703–1713, 1999     

Effects of glass-transition temperature on properties of photorefractive polymer composite

In this study, photorefractive polymer composites were developed in which polycarbonate was doped with a dual-function dopant and a photocharge generation sensitizer. The dual-function dopant has the function of providing both charge transport and optical nonlinearity. The composites' photoconductivity and electrooptic coefficient were investigated experimentally. The effects of the glass-transition temperature (T_g), dual-function dopant content, and electric field on the composites' photorefractive properties were studied as well. The results show that the composites' photorefractive properties are enhanced with decreasing T_g, increasing dual-function dopant content, and increasing electric field. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3302–3306, 1999     

Influence of the draw ratio on the tensile and fracture behavior of NMMO regenerated silk fibers

The tensile properties and fracture surfaces of N‐methylmorpholine‐N‐oxide (NMMO) regenerated silk fibroin fibers produced with a range of draw ratios has been characterized and related to their microstructure with data obtained from Raman spectroscopy and birefringence measurements. The spinning process allows control of two different draw ratios, coagulation, and postspinning, and it has been found that the microstructure and the properties of the fibers can be modified by the proper combination of both draw ratios. NMMO regenerated silk fibroin fibers subjected to postspinning drawing yield tensile properties comparable to other regenerated fibers and strain at breaking comparable to natural Bombyx mori silk fibers. Tensile strength; however, is still significantly lower than that of natural fibers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2568–2579, 2007     

Synthesis and properties of poly(silylenevinylene(bi)phenylenevinylene)s by hydrosilylation polymerization

Poly(silylenevinylene(bi)phenylenevinylene)s were synthesized by chloroplatinic acid-catalyzed hydrosilylation polymerization between α,ω-diethynylarenes and methylphenylsilane or diphenylsilane. The polymer structure was dependent on the substituent size of silane reagent. Poly(silylenevinylenephenylenevinylene)s showed fluorescence emission in the blue region. Optical and thermal properties of the polymers were extensively investigated. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2933–2940, 1999     

Synthesis and characterization of polyimides with ether linkages

Thermoplastic and thermoset polyimides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP) and 4,4′-bis(4-aminophenoxy)-2,2′-dimethylbiphenyl (BAPD) were prepared and characterized. Their physical and thermal properties as well as the polyelectrolyte effect exhibited by BTDA–BAPP polyamic acids in NMP solution were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2559–2567, 1999     

Model of processing‐induced microstructure formation in polymeric materials

A general, mechanistic, kinetic model is presented to predict polymer microstructure formation during processing. Applications of the model are presented for three specific cases. The model represents polymer molecules as Kramers chains which may or may not have nucleated. Three forces (hydrodynamic, Brownian, and intermolecular) that act on polymer molecules during processing were considered, which resulted in the presentation of the model as a diffusion equation. The input parameters account for the rheological and thermal history of the polymer melt, the specific type of polymer molecule, and the initial morphology. The solution of the diffusion equation yields a probability distribution function from which the transient and equilibrium morphology can be determined. The three specific cases were chosen to illustrate the versatility of the model and include: the extensional flow‐induced growth of extended chain crystals; the orientation of stiff molecules in solution undergoing shear flow well above the crystallization temperature; and the formation of folded chain vs. extended chain crystals in an extensional flow. Data are available for the first two cases and agree favorably with the model predictions. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2571–2585, 1999     

Synthesis and properties of poly(silylenephenylenevinylene)s

Polymerization of o-, m-, and p-(dimethylsilyl)phenylacetylene by chloroplatinic acid-catalyzed hydrosilylation gave the corresponding poly(dimethylsilylenephenylenevinylene)s. The monomer reactivity and polymer structure were very much dependent upon the substituent position. Interesting optical behavior and thermal properties were observed which suggested the polymers to be useful as preceramic materials. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2263–2273, 1999     

Thermal and dielectric properties of oriented liquid crystalline polysiloxane doped with azo‐dye

Investigations of dielectric relaxation and thermal properties of mixtures composed of liquid crystalline side‐chain polysiloxane and low molecular mass azo‐dye have been carried out. The dyes have been chosen to solublize well in the polymer matrix at concentrations up to 0.08 mol fraction. The dielectric relaxation experiments have shown the presence of separate processes attributed to reorientational motions of mesogenic side groups and dye molecules. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 369–377, 1999     

Fixed crosslink formation and viscoelasticity of polystyrene networks

The crosslinking formation in the 8/92 mol % random copolymer of ethynyl- styrene and styrene is clarified quantitatively from the IR spectrum analysis on the basis of the thermally homogeneous reaction of ethynylstyrenes between the chains. The viscoelastic properties of the crosslinked polystyrene, CL-P(ESt/St), are investigated based on the temperature and frequency dependencies of the dynamic Young modulus. The relaxation spectrum of CL-P(ESt/St) drops deeply like the Wedge type with a slope of −½ in the glass transition region, and became a plateau without a terminal zone in the rubbery elasticity region. The effects of the ethynyl crosslinked junctions for the micro-Brownian motions of the segments in the strand are discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3319–3327, 1999     

Synthesis and properties of polysiloxane-based electrooptic materials

In this study, new functionalized polysiloxane material was synthesized. The polysiloxane-based electrooptic material with side-chain charge-transporting functionalities and nonlinear optical chromophores was investigated through a three-step synthetic route. Elementary analysis and NMR spectra indicate that the polymer has a high degree of substitution. Detailed physical properties showed that the polymer has a glass transition of around 91°C, and its photoconductivity and electrooptic coefficient increase with the increasing applied electric field. Photorefractivity of the system has been demonstrated through the asymmetric energy transfer in a two-beam coupling experiment. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3854–3860, 1999     

Organic–inorganic hybrid materials. I. Characterization and degradation of poly(imide–silica) hybrids

Poly(imide–silica) hybrid materials with covalent bonds were prepared by (3-aminopropyl)methyldiethoxysilane (APrMDEOS) terminated amic acid, water, and tetramethoxysilane (TMOS) via a sol–gel technique. Infrared (IR), ²⁹Si and ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA) were used to study hybrids containing various proportions of TMOS and hydrolysis ratios. The microstructure and chain mobility of hybrids were investigated by proton spin–spin relaxation T₂ measurements. The apparent activation energy E_a for degradation of hybrids in air was studied by the van Krevelen method. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2275–2284, 1999     

Fracture behavior–morphology relationships in an unsaturated polyester resin modified with a liquid oligomer

An unsaturated polyester (UP) resin modified with a liquid polymer, polyoxypropylenetriamine (POPTA), at a concentration of 10 wt% has been precured at several temperatures. Phase separation takes place before gelation at all precure temperatures used. The glass‐transition region has been analyzed by dynamic mechanical analysis. Mechanical properties have been related to microstructural features. With a precure temperature fixed, the unsaturated polyester (UP) resin has also been modified with different contents of POPTA. Fracture toughness of the mixtures has also been analyzed and results are compared to those for the unmodified mixture. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1677–1685, 1999     

Partially renewable copolyesters prepared from acetalized d‐glucitol by solid‐state modification of poly(butylene terephthalate)

The backbone of poly(butylene terephthalate) (PBT) was modified with 2,4:3,5‐di‐O‐methylene‐D ‐glucitol (Glux) using solid‐state modification (SSM). The obtained copolyesters proved to have a non‐random overall chemical microstructure. The thermal properties of these semicrystalline, block‐like, Glux‐based materials were extraordinary, showing higher melting points, and glass transition temperatures compared with other sugar‐based copolyesters prepared by SSM. These remarkable thermal properties were a direct result of the inherently rigid structure of Glux and the relatively slow randomization of the block‐like chemical microstructure of the Glux‐based copolyesters in the melt. SSM proved to be a versatile tool for preparing partially biobased copolyesters with superior thermal properties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 164–177     

Mechanical properties of molecular composites. I. Poly (p‐phenylene terephthalamide) anion molecules dispersed in poly(4‐vinylpyridine)

Molecular composites have been prepared by dispersing rigid‐rod molecules of ionically‐modified poly(p‐phenylene terephthalamide) (PPTA anion) in a polar poly(4‐vinylpyridine) (PVP) matrix. For concentrations up to 5 wt % of the rigid‐rod reinforcement, the resulting composites are transparent and possess a single glass transition temperature that increases with concentration of the PPTA anion. The mechanical properties of the molecular composites are found to increase with concentration and to attain maximum values at about 5 wt % of the PPTA anion. The enhancement in properties, and the miscibility induced between the two component polymers, is attributed to the development of specific interactions between the ionic groups of the PPTA anion and the polar units of the PVP matrix. When such interactions are not present, as in composites reinforced with non‐ionic PPTA, the samples are opaque and their properties are significantly reduced compared to those of the PPTA anion/PVP composites. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2201–2209, 1999     

Microstructural characterization of acrylonitrile/pentyl acrylate copolymers by one and 2‐D NMR spectroscopy

Acrylonitrile/pentyl acrylate (A/P) copolymers of different monomer composition were prepared by solution polymerization using benzoyl peroxide as initiator. Copolymer compositions were determined by elemental analysis and quantitative ¹³C¹H‐NMR spectroscopy. The comonomer reactivity ratios, determined by both Kelen Tudos (KT) and nonlinear error in variables (EVM) methods are r_A = 0.75 and r_p = 0.45. 2‐D heteronuclear correlation spectroscopy (HSQC) was used to simplify the complex ¹H spectra of A/P copolymers in terms of configurational and compositional sequences. The microstructure was obtained in terms of the distribution of A‐ and P‐ centered triad sequences from ¹³C¹H‐NMR spectra of the copolymers. The copolymerization mechanism was found to follow a first order Markov Model. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 533–543, 1999     

Effects of temperature on cure kinetics and mechanical properties of vinyl–ester resins

The relationships among cure temperature, chemical kinetics, microstructure, and mechanical performance have been investigated for vinyl–ester resins. Fourier transform infrared spectroscopy was used to follow the reactions of vinyl–ester and styrene during isothermal curing of Dow Derakane 411‐C‐50 at 30 and 90°C. Reactivity ratios of vinyl–ester and styrene vinyl groups were evaluated using the copolymer composition equation. The results indicate that the ratio of vinyl–ester to styrene double bonds incorporated into the network is greater for 30 than for 90°C cure. Mechanical properties were obtained for systems subjected to isothermal cures at 30 and 90°C and postcured above ultimate T_g. The results show that the initial cure temperature significantly affects the mechanical behavior of vinyl–ester resin systems. In particular, values of strength and fracture toughness for postcured samples initially cured isothermally at 30°C are significantly higher than those obtained for samples cured isothermally at 90°C. Examination of fracture surfaces using atomic force microscopy revealed the existence of a nodular microstructure possessing characteristic nodule dimensions that are affected by the temperature of cure. Such features suggest the existence of phase separation during cure. A binary interaction model in conjunction with chemical kinetic data and estimated solubility parameters was used to evaluate enthalpic interactions between the growing polymer network and monomers of the vinyl–ester system. The results indicate that the interaction energy becomes increasingly endothermic as cure progresses and that this energy is affected by the temperature of cure through differences in copolymerization behavior. Hence, in addition to entropic factors, the changes in enthalpic contribution to the Gibbs free energy suggest that the probability of phase separation increases with extent of cure and that its onset is potentially affected by cure temperature. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 725–744, 1999