Synthesis of some novel heteroarylene ethynylene polymers containing 1,10-phenanthroline in the polymer backbone

Palladium-catalyzed polycondensation between 3,8-dibromo-1,10-phenanthroline and substituted phenyl-1,4-diacetylenes in the presence of diisopropylamine produced the soluble π-conjugated poly(heteroarylene ethynylene)s 7a and 7b . The polymers were obtained in high yields (86–92%) and had molecular weights of M̄_n = 8700 g · mol⁻¹ ( 7a ; vapor pressure osmometry) and 6900 g · mol⁻¹ ( 7b ; vapor pressure osmometry). The low molecular model compounds 6a and 6b were prepared to analyze the connection between the primary structure and spectroscopic properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4442–4448, 1999     

Vinylic polymerization of norbornene by neutral nickel(II)‐based catalysts

Neutral Ni(II) salicylaldiminato complexes activated with modified methylaluminoxane as catalysts were used for the vinylic polymerization of norbornene. Catalyst activities of up to 7.08 × 10⁴ kg_pol/(mol_Ni · h) and viscosity‐average molecular weights of polymer up to 1.5 × 10⁶ g/mol were observed at optimum conditions. Polynorbornenes are amorphous, soluble in organic solvents, highly stable, and show glass‐transition temperatures around 390 °C. Catalyst activity, polymer yield, and polymer molecular weight can be controlled over a wide range by the variation of the reaction parameters such as the Al/Ni ratio, monomer/catalyst ratio, monomer concentration, polymerization reaction temperature, and time. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2680–2685, 2002     

Continuous solution copolymerization of ethylene and octene-1 with constrained geometry metallocene catalyst

The solution copolymerization of ethylene (1) with octene-1 (2) in Isopar E using constrained geometry catalyst system, [C₅Me₄(SiMe₂N^tBu)]TiMe₂ (CGC-Ti)/tris(pentafluorophenyl)boron (TPFPB)/modified methylaluminoxane (MMAO), has been carried out in a high-temperature, high-pressure continuous stirred-tank reactor (CSTR) at 140°C, 500 psig and with a mean residence time of 4 min. A series of copolymer samples with octene-1 content up to 0.337 mole fraction were synthesized and characterized. The estimated reactivity ratios were r₁ = 7.90 and r₂ = 0.099. The CGC-Ti showed a higher ability to incorporate high α-olefins than other metallocene catalysts investigated in the literature due to its open structure. The presence of octene-1 lowered the catalyst activity, particularly at octene-1 levels higher than 0.45 mole fraction. Octene-1 was also found to reduce the molecular weight of polymer and broaden the molecular weight distributions. The triad distributions were measured by ¹³C-NMR. A minor penultimate effect was observed. The penultimate octene-1 unit appeared to slow down monomer insertion rates. A comparison of the propagation rate of octene-1 with the incorporation rate of macromonomer in the homopolymerization of ethylene suggests that the addition of macromonomer is effectively instantaneous after it is generated with diffusion to or from the active center reaction volume playing a minor role. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2949–2957, 1999     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Volume dependence of thermal conductivity and bulk modulus for poly(propylene glycol)

The thermal conductivity λ and heat capacity per unit volume of poly(propylene glycol) PPG (0.4 and 4.0 kg·mol⁻¹ in number-average molecular weight) have been measured in the temperature range 150–295 K at pressures up to 2 GPa using the transient hot-wire method. At 295 K and atmospheric pressure, λ = 0.147 W m⁻¹K⁻¹ for PPG (0.4 kg·mol⁻¹) and λ = 0.151 W m⁻¹K⁻¹ for PPG (4.0 kg·mol⁻¹). The temperature dependence of λ is less than 4 × 10⁻⁴ W m⁻¹K⁻² for both molecular weights. The bulk modulus has been measured in the temperature range 215–295 K up to 1.1 GPa. At atmospheric pressure, the room temperature bulk moduli are 1.97 GPa for PPG (0.4 kg·mol⁻¹) and 1.75 GPa for PPG (4.0 kg·mol⁻¹). These data were used to calculate the volume dependence of $ \lambda ,g\, = - \left( {\frac{{\partial \lambda /\lambda }}{{\partial V/V}}} \right)_T $. At room temperature and atmospheric pressure (liquid phase) we find g = 2.79 for PPG (0.4 kg·mol⁻¹) and g = 2.15 for PPG (4.0 kg·mol⁻¹). The volume dependence of g, (∂g/∂ log V)_T varies between −19 to −10 for both molecular weights. Under isochoric conditions, g is nearly independent of temperature. The difference in g between the glassy state and liquid phase is small and just outside the inaccuracy of g of about 8%. The theoretical model for λ by Horrocks and McLaughlin yields an overestimate of g by up to 120%. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 345–355, 1998     

Organocatalyzed ring‐opening polymerization of cyclic butylene terephthalate oligomers

In this study, various organic compounds, with different activation modes, have been tested as catalysts for the ring‐opening polymerization (ROP) of cyclic butylene terephthalate oligomers (CBT) in bulk at 210 °C, using tert‐butylbenzyl alcohol (tBnOH) as initiator. Among them, 1,3,5‐triazabicyclo[4.4.0]dec‐5‐ene (TBD) appeared to be the most efficient, achieving high monomer conversions in short reaction times (within minutes). Analysis by size‐exclusion chromatography (SEC) of the poly(butylene terephthalate) (PBT) synthesized using this catalyst also showed that the polymerization follows the expected theoretical M _n trend for molecular weights up to 50 kg·mol^?1. Chain‐end fidelity relatively to the alcohol initiator has been confirmed by MALDI‐TOF mass spectroscopy, which showed that all polymer chains possess the tert‐butylbenzyl moiety as chain‐end. Finally, to demonstrate the potential of this system for the synthesis of PBT‐based block copolymers, a monomethyl ether poly(ethylene glycol) (PEG) of 5000 g·mol^?1 has been employed as initiator for the ROP of CBT. A PEO‐b‐PBT block copolymer of 15,000 g·mol^?1 could thus been obtained, as confirmed by the shift of the SEC traces towards higher molecular weights and the same diffusion coefficient determined for ¹H NMR signals of the PEO block and the PBT block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1611–1619     

Modeling the reversible addition–fragmentation chain transfer process in cumyl dithiobenzoate‐mediated styrene homopolymerizations: Assessing rate coefficients for the addition–fragmentation equilibrium

A full kinetic scheme for the free‐radical reversible addition–fragmentation chain transfer (RAFT) process is presented and implemented into the program package PREDICI®. With the cumyl dithiobenzoate‐mediated bulk polymerization of styrene at 60 °C as an example, the rate coefficients associated with the addition–fragmentation equilibrium are deduced by the careful modeling of the time‐dependent evolution of experimental molecular weight distributions. The rate coefficient for the addition reaction of a free macroradical to a polymeric RAFT species (k_β) is approximately 5 · 10⁵ L mol^?1 s^?1, whereas the fragmentation rate coefficient of the formed macroradical RAFT species is close to 3 · 10^?2 s^?1. These values give an equilibrium constant of K = k_β/k_?β = 1.6 · 10⁷ L mol^?1. Conclusive evidence is given that the equilibrium lies well on the side of the macroradical RAFT species. The high value of k_β is comparable in size to the propagation rate coefficients reported for acrylates. The transfer rate coefficient to cumyl dithiobenzoate is close to 3.5 · 10⁵ L mol^?1 s^?1. A careful sensitivity analysis was performed, which indicated that the reported rate coefficients are accurate to a factor of 2. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1353–1365, 2001     

Synthesis of a novel [60]fullerene pearl-necklace polymer,poly(4,4′-carbonylbisphenylene trans-2-[60]fullerenobisacetamide)

A novel [60]fullerene pearl-necklace polymer, poly(4,4′-carbonylbisphenylene trans-2-[60]fullerenobisacetamide), was synthesized by a direct polycondensation of trans-2-[60]fullerenobisacetic acid with 4,4′-diaminobenzophenone in the presence of large excesses of triphenyl phosphite and pyridine. In the present polymer, [60]fullerene pearls and diamine linkers were attached to each other by methano-carbonyl connectors. The molecular weight M_w of the polymer was determined to be 4.5 × 10⁴ on the basis of the TOF-MS, and a GPC analysis of the polymer using polystyrene standards showed a weight-average molecular weight of 5.3 × 10⁴. The UV-vis spectrum of the resultant polymer in N,N-dimethylacetamide (DMAc) exhibited a broad absorption (λ_max 310 nm, ε 2.1 × 10⁴ L · mol⁻¹ · cm⁻¹), tailing to longer wavelengths, and a fluorenscence peak centered at 550 nm was observed in DMAc. There was observed a large downfield-shift of the cyclopropane methyne proton in the ¹H-NMR spectra from 4.57 ppm of the ethyl ester to 5.78 ppm of the polyamide. These observations indicate that the present polyamide is a high-molecular-weight [60]fullerene pearl-necklace polymer and that the cyclopropane rings are efficient to make the [60]fullerene cages and the diamine components conjugatable. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3632–3637, 1999     

Transesterification of oligomeric dialkyl phosphonates,leading to the high‐molecular‐weight poly‐H‐phosphonates

Polycondensation of 1,10‐decanediol with dimethyl‐H‐phosphonate taken in excess leads to oligomers with methyl‐H‐phosphonate end groups. The polytransesterification of the resulting oligomer as well as the related model reactions were studied. The synthesis of poly(decamethylene‐H‐phosphonate) was analyzed and the final product had M̄_n = 1.4–1.9 10⁴ (from end groups, vpo, and M̄_n of the derived polymers). The exchange of the ester groups between two homoesters (dimethyl and diethyl phosphonates) used as models, conducted at r.t. and catalyzed by metal alkoxide provides mixed (hetero) ester in a few minutes. If the concentration of the catalyst is not high enough, then the reaction does not go to equilibrium, because the alcoholate anions are converted into the anions of monoesters of the H‐phosphonic acid, catalytically inactive at this temperature. However, these monoesters become catalytically active at higher temperature, i.e., at the conditions used for preparing higher molecular‐weight products by transesterification. The apparent rate constants (k̄) of the ester exchange catalyzed by monoester salt (modeling the propagation step in polytransesterification) were determined by two independent methods; at 130°C k̄ ∼ 1.0 · 10⁻² mol⁻¹ · L · s⁻¹. The detailed study of the model polytransesterification, and particularly of the polymer end groups appearance and disappearance (studied by ¹H‐, ¹³C‐, and ³¹P‐NMR) allowed postulation of the reaction mechanism and confirmed our previous work, describing formation at these conditions of polymers with M̄_n > 10⁴. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1365–1381, 1999     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Thermo‐stable 2‐(arylimino)benzylidene‐9‐arylimino‐5,6,7,8‐tetrahydro cyclohepta[b]pyridyliron(II) precatalysts toward ethylene polymerization and highly linear polyethylenes

A series of 2‐(arylimino)benzylidene‐9‐arylimino‐5,6,7,8‐tetrahydrocyclohepta[b] pyridyliron(II) chlorides was synthesized and characterized using FT‐IR and elemental analysis, and the molecular structures of complexes Fe3 and Fe4 have been confirmed by the single‐crystal X‐ray diffraction as a pseudo‐square‐pyramidal or distorted trigonal‐bipyramidal geometry around the iron core. On activation with methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all iron precatalysts exhibited high activities toward ethylene polymerization with a marvelous thermo‐stability and long lifetime. The Fe4 /MAO system showed highest activity of 1.56 × 10⁷ gPE·mol^?1(Fe)·h^?1 at 70 °C, which is one of the highest activities toward ethylene polymerization by iron precatalysts. Even up to 80 °C, Fe3 /MAO system still persist high activity as 6.87 × 10⁶ g(PE)·mol^?1(Fe)·h^?1, demonstrating remarkable thermal stability for industrial polymerizations (80–100 °C). This was mainly attributing to the phenyl modification of the framework of the iron precatalysts. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 830–842     

Highly branched and high‐molecular‐weight polyethylenes produced by 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC6H2N]‐2‐aryliminoacenaphthylnickel(II) halides

A series of unsymmetrical 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC₆H₂N]‐2‐aryliminoacenaphthene‐nickel(II) halides has been synthesized and fully characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (¹H NMR), ¹³C NMR, and ¹⁹F NMR spectroscopy as well as elemental analysis. The structures of Ni1 and Ni6 have been confirmed by the single‐crystal X‐ray diffraction. On activation with cocatalysts either ethylaluminum sesquichloride or methylaluminoxane, all the title nickel complexes display high activities toward ethylene polymerization up to 16.14 × 10⁶ g polyethylene (PE) mol^?1(Ni) h^?1 at 30 °C, affording PEs with both high branches (up to 103 branches/1000 carbons) and molecular weight (1.12 × 10⁶ g mol^?1) as well as narrow molecular weight distribution. High branching content of PE can be confirmed by high temperature ¹³C NMR spectroscopy and differential scanning calorimetry. In addition, the PE exhibited remarkable property of thermoplastic elastomers (TPEs) with high tensile strength (σ_b = 21.7 MPa) and elongation at break (ε_b = 937%) as well as elastic recovery (up to 85%), indicating a better alternative to commercial TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 130–145     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(21) 5559 . The initiator efficiency, f, of 2,2′‐azobis(isobutyronitrile) (AIBN) in dodecyl acrylate (DA) bulk free‐radical polymerizations has been determined over a wide range of monomer conversion in high‐molecular‐weight regimes (M_n ? 10⁶ g mol^?1 [? 4160 units of DA)] with time‐dependent conversion data obtained via online Fourier transform near infrared spectroscopy (FTNIR) at 60 °C. In addition, the required initiator decomposition rate coefficient, k_d, was determined via online UV spectrometry and was found to be 8.4 · 10^?6 s^?1 (±0.5 · 10^?6 s^?1) in dodecane, n‐butyl acetate, and n‐dodecyl acetate at 60 °C. The initiator efficiency at low monomer conversions is relatively low (f = 0.13) and decreases with increasing monomer to polymer conversions. The evolution of f with monomer conversion (in high‐molecular‐weight regimes), x, at 60 °C can be summarized by the following functionality: f^{60 °C} (x) = 0.13–0.22 · x + 0.25 · x² (for x ≤ 0.45). The reported efficiency data are believed to have an error of >50%. The ratio of the initiator efficiency and the average termination rate coefficient, 〈k_t±, (f/〈k_t〉) has been determined at various molecular weights for the generated polydodecyl acrylate (M_n = 1900 g mol^?1 (? 8 units of DA) up to M_n = 36,500 g mol^?1 (? 152 units of DA). The (f/〈k_t〉) data may be indicative of a chain length‐dependent termination rate coefficient decreasing with (average) chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5170–5179, 2004     

Free‐radical copolymerization of styrene and itaconic acid studied by 1H NMR kinetic experiments

The free‐radical copolymerization of itaconic acid (IA) and styrene in solutions of dimethylformamide and d₆‐dimethyl sulfoxide (50 wt %) has been studied by ¹H NMR kinetic experiments. Monomer conversion versus time data were used to estimate the ratio k_p · k_t^−0.5 for various comonomer mixture compositions. The ratio k_p · k_t^−0.5 varies from 5.2 · 10⁻² for pure styrene to 2.0 · 10⁻² mol^0.5 L^−0.5 s^−0.5 for pure IA, indicating a significant decrease in the rate of polymerization. Individual monomer conversion versus time traces were used to map out the comonomer mixture–composition drift up to overall monomer conversions of 60%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed can be observed. This depletion becomes more pronounced at higher levels of IA in the initial comonomer mixture. The kinetic information is supplemented by molecular weight data for IA/styrene copolymers obtained by variation of the comonomer mixture composition. A significant decrease in molecular weight of a factor of 2 can be observed when increasing the mole fraction of IA in the initial reaction mixture from 0 to 0.5. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 656–664, 2001     

Activity and stability spontaneously enhanced toward ethylene polymerization by employing 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl) pyridyliron(II) dichlorides

A series of 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridyliron(II) complexes ( Fe1 ? Fe5 ) was synthesized and characterized. The molecular structure of the representative Fe2 was determined by single‐crystal X‐ray diffraction, revealing a distorted pseudo‐square‐pyramidal geometry around the iron center. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all these iron complex precatalysts performed with high activities (up to 1.58 × 10⁷ g (PE) mol^?1 (Fe) h^?1) toward ethylene polymerization, producing highly linear polyethylenes with high molecular weight and bimodal distribution, which was in accordance with high temperature ¹³C NMR, high T _m values (T _m ～130 °C) and the GPC curves of the obtained polyethylenes. Meanwhile, DFT calculation results also showed the good correlation between net charges on iron and experimental activities. Compared with previous bis(imino)pyridyliron analogues, the current iron complexes containing the benzhydrylnaphthyl groups exhibited relatively higher activities and better thermal‐stability at elevated temperatures, especially at 80 °C as the industrial operating temperature, and still showed high activities toward ethylene polymerization up to 8.57 × 10⁶ g (PE) mol^?1 (Fe) h^?1 in the presence of co‐catalyst MMAO. In addition, these iron complex precatalysts all exhibited long lifetimes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 988–996