“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Kinetic analysis of nitroxide radical coupling reactions mediated by CuBr

In a previous paper, we described the room temperature rapid, selective, reversible, and near quantitative Cu‐activated nitroxide radical coupling (NRC) technique to prepare 3‐arm polystyrene stars. In this work, we evaluated the Cu‐activation mechanism, either conventional atom transfer or single electron transfer (SET), through kinetic simulations. Simulation data showed that one can describe the system by either activation mechanism. We also found through simulations that bimolecular radical termination, regardless of activation mechanism, was extremely low and could be considered negligible in an NRC reaction. Experiments were carried out to form 2‐ and 3‐arm PSTY stars using two ligands, PMDETA and Me₆TREN, in a range of solvent conditions by varying the ratio of DMSO to toluene, and over a wide temperature range. The rate of 2‐ or 3‐arm star formation was governed by the choice of solvent and ligand. The combination of Me₆TREN and toluene/DMSO showed a relatively temperature independent rate, and remarkably reached near quantitative yields for 2‐arm star formation after only 1 min at 25 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2214–2223, 2010     

Universal xanthate‐mediated controlled free radical polymerizations of the “less activated” vinyl monomers

The living free radical polymerizations of three “less activated” monomers (LAMs), vinyl acetate, N‐vinylcarbazole, and N‐vinylpyrrolidone, were successfully achieved in the presence of a disulfide, isopropylxanthic disulfide (DIP), using 2,2′‐azoisobutyronitrile (AIBN) as the initiator. The living behaviors of polymerizations of LAMs are evidenced by first‐order kinetic plots and linear increase of molecular weights (M_ns) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions, respectively. The effects of reaction temperatures and molar ratios of components on the polymerization were also investigated in detail. The polymerization proceeded with macromolecular design via interchange of xanthate process, where xanthate formed in situ from reaction of AIBN and DIP. The architectures of the polymers obtained were characterized by GPC, ¹H NMR, UV–vis, and MALDI‐TOF‐MS spectra, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Cure kinetics of biphenyl epoxy‐phenol novolac resin system using triphenylphosphine as catalyst

The effects of the concentration of triphenylphosphine as a catalyst on the cure reaction of the biphenyl epoxy/phenol novolac resin system were studied. The kinetic study was carried out by means of the analysis of isothermal experiments using a differential scanning calorimeter. All kinetic parameters including the reaction orders, activation energy and kinetic rate constants were evaluated. To describe the cure reaction with the catalyst concentration, the normalized kinetic model was developed. The suggested kinetic model with a diffusion term was successfully able to describe and predict the cure reaction of epoxy resin compositions as functions of the catalyst content and temperature. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 713–720, 1999     

Liquid‐phase polymerization of propylene with a highly active Ziegler–Natta catalyst. Influence of hydrogen,cocatalyst, and electron donor on the reaction kinetics

This paper presents an experimental kinetic study of the polymerization of propylene in liquid monomer with a high activity catalyst. The influences of the concentration of hydrogen and the molar ratios of the catalyst, cocatalyst, and electron donor on the activation period, the maximum activity, the yield, and the decay behavior have been investigated at a temperature of 42°C using a relatively simple kinetic model. On the basis of the experimental data, the reaction rate has been modeled as a function of the hydrogen concentration, the molar ratio of cocatalyst and titanium, and the molar ratio of the electron donor and the cocatalyst. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 219–232, 1999     

Synthesis of poly(isobornyl acrylate) containing copolymers by atom transfer radical polymerization

For the first time, a detailed study of the atom transfer radical polymerization of isobornyl acrylate (iBA) is reported. On the basis of these results, well‐defined PiBA‐containing block copolymers were synthesized, focussing on the preparation of amphiphilic poly(acrylic acid) (PAA) containing block copolymers. The precursor monomers 1‐ethoxyethyl acrylate (EEA) as well as tert‐butyl acrylate have been used to synthesize the PAA‐segments of the PiBA‐b‐PAA block copolymers. Finally, the synthesis of “block‐like” copolymers of PiBA and PEEA via a one‐pot procedure was investigated. By optimizing the copper and ligand concentration, and choosing the appropriate solvent, a controlled polymerization behaviour was obtained in all cases, as evidenced by a detailed kinetic analysis, GPC, NMR, and MALDI‐TOF data. Thermogravimetric analysis confirmed the quantitative transformation of the precursor polymer PEEA to the corresponding PAA‐containing copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1649–1661, 2008     

Ethylene polymerization reactions with Ziegler–Natta catalysts. I. Ethylene polymerization kinetics and kinetic mechanism

Kinetics of ethylene homopolymerization reactions and ethylene/1-hexene copolymerization reactions using a supported Ziegler–Natta catalyst was carried out over a broad range of reaction conditions. The kinetic data were analyzed using a concept of multicenter catalysis with different centers that respond differently to changes in reaction parameters. The catalyst contains five types of active centers that differ in the molecular weights of material they produce and in their copolymerization ability. In ethylene homopolymerization reactions, each active center has a high reaction order with respect to ethylene concentration, close to the second order. In ethylene/α-olefin copolymerization reactions, the centers that have poor copolymerization ability retain this high reaction order, whereas the centers that have good copolymerization ability change the reaction order to the first order. Hydrogen depresses activity of each type of center in the homopolymerization reactions in a reversible manner; however, the centers that copolymerize ethylene and α-olefins well are not depressed if an α-olefin is present in the reaction medium. Introduction of an α-olefin significantly increases activity of those centers, which are effective in copolymerizing it with ethylene but does not affect the centers that copolymerize ethylene and α-olefins poorly. To explain these kinetic features, a new reaction scheme is proposed. It is based on a hypothesis that the Ti—C₂H₅ bond in active centers has low reactivity due to the equilibrium formation of a Ti—C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4255–4272, 1999     

One‐pot preparation of ABA‐type block‐graft copolymers via a combination of “click” chemistry with atom transfer nitroxide radical coupling reaction

A new strategy for the one‐pot preparation of ABA‐type block‐graft copolymers via a combination of Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) “click” chemistry with atom transfer nitroxide radical coupling (ATNRC) reaction was reported. First, sequential ring‐opening polymerization of 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (GTEMPO) and 1‐ethoxyethyl glycidyl ether provided a backbone with pendant TEMPO and ethoxyethyl‐protected hydroxyl groups, the hydroxyl groups could be recovered by hydrolysis and then esterified with 2‐bromoisobutyryl bromide, the bromide groups were converted into azide groups via treatment with NaN₃. Subsequently, bromine‐containing poly(tert‐butyl acrylate) (PtBA‐Br) was synthesized by atom transfer radical polymerization. Alkyne‐containing polystyrene (PS‐alkyne) was prepared by capping polystyryl‐lithium with ethylene oxide and subsequent modification by propargyl bromide. Finally, the CuAAC and ATNRC reaction proceeded simultaneously between backbone and PtBA‐Br, PS‐alkyne. The effects of catalyst systems on one‐pot reaction were discussed. The block‐graft copolymers and intermediates were characterized by size‐exclusion chromatography, ¹H NMR, and FT‐IR in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Photo‐initiated thiol–ene “click” hydrogels from RAFT‐synthesized poly(N‐isopropylacrylamide)

Despite the efficiency and robustness of the widely used copper‐catalyzed 1,3‐dipolar cycloaddition reaction, the use of copper as a catalyst is often not attractive, particularly for materials intended for biological systems. The use of photo‐initiated thiol‐ene as an alternative “click” reaction to synthesize “model networks” is investigated here. Poly(N‐isopropylacrylamide) precursors were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and were designed to have trithiocarbonate moieties as end groups. This structure design provides opportunity for subsequent end‐group modifications in preparation for thiol‐ene “click.” Two reaction routes have been proposed and studied to yield thiol and ene moieties. The advantages and disadvantages of each reaction path were investigated to propose a simple but efficient route to prepare copper‐free “click” hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4626–4636     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Copper(0)‐catalyzed one‐pot synthesis of ABC triblock copolymers via the combination of single electron transfer nitroxide radical coupling reaction and “click” chemistry

The synthesis of ABC triblock copolymers were accomplished by Cu(0)‐catalyzed one‐pot strategy combining single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction with “click” chemistry. First, the precursors α,ω‐heterofunctionalized poly(ethylene oxide) (PEO) with a 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group and an alkyne group, polystyrene (PS), and poly(tert‐butyl acrylate) (PtBA) with bromine or azide end group were designed and synthesized, respectively. Then, the one‐pot coupling reactions between these precursors were carried out in the system of Cu(0)/Me₆TREN: The SET‐NRC reaction between bromine group and nitroxide radical group, subsequently click coupling between azide and alkyne group. It was noticeable that Cu(I) generated from Cu(0) by SET mechanism was utilized to catalyze click chemistry. To estimate the effect of Cu(0) on the one‐pot reaction, a comparative analysis was performed in presence of different Cu(0) species. The result showed that Cu(0) with more active surface area could accelerate the one‐pot reaction significantly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetics of redox polymerizations of acrylic acid in inverse dispersion and in aqueous solution

Redox polymerizations of acrylic acid in inverse dispersion and in aqueous solution (with surfactant) were conducted by using sodium metabisulphite/potassium bromate initiators. The monomer conversions were determined by using high‐performance liquid chromatography, and the polymer particles in the final lattices were examined using a scanning electron microscope with freeze‐fracture equipment. Experimental rate expressions implied that complex reactions are involved in the redox polymerizations. A chemical reaction scheme was proposed, and kinetic models were developed for the redox polymerization in aqueous solution. Comparison between the experimental rate expressions and the kinetic models suggested a combination of bimolecular and monomolecular termination modes, a chain transfer function of the surfactant, and an oxidizing role of the oxygen molecules. The differences in the experimental rate expressions between the redox polymerization in inverse dispersion and that in aqueous solution are in good agreement with the kinetic model predictions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 313–324, 1999     

Cyclic polymers: Methods and strategies

Cyclic polymers have different physical properties compared to their linear counterparts of the same molecular weight. These different properties could have potential impact in the production of new and exciting polymer products. For industry to commercialize such materials, cyclic polymers need to be made on large scales, have controlled molecular weight distributions, and have versatile chemical composition. This highlight article describes many of the synthetic methods and strategies for obtaining highly pure cyclic polymers, and presents kinetic attributes for some of the processes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Main kinetic features of ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts in the light of a multicenter reaction mechanism

A previously developed kinetic scheme for ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts (see Y. V. Kissin, R. I. Mink, & T. E. Nowlin, J Polym Sci Part A: Polym Chem 1999, 37, 4255 and Y. V. Kissin, R. I. Mink, T. E. Nowlin, & A. J. Brandolini, J Polym Sci Part A: Polym Chem 1999, 37, 4273, 4281) states that the catalysts have several types of active centers that have different activities and different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. Each type of center produces a single polymer component (Flory component), a material with a uniform structure (copolymer composition, isotacticity, etc.) and a narrow molecular weight distribution (weight-average molecular weight/number-average molecular weight = 2.0). This article examines several previously known features of ethylene polymerization and copolymerization reactions on the basis of this mechanism. The discussed subjects include temperature and cocatalyst effects on the polymerization kinetics and molecular weight distribution of polymers and reaction parameter effects (temperature, ethylene and hydrogen partial pressures, and α-olefin and cocatalyst concentrations) on the molecular weights of Flory components. The results show that the formulation of the multicenter kinetic scheme and the development of kinetic tools necessary for the application of this scheme significantly expand our understanding of the working of heterogeneous polymerization catalysts and provide additional means for their control. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1681–1695, 2001     

Kinetics of bulk azide/alkyne “click” polymerization

A bulk step‐growth polymerization of multifunctional azides and alkynes through the copper (I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction is described. The polymerization kinetics of two systems containing different diynes, bisphenol E diyne (BE‐diyne)/bisphenol A bisazide (BA‐bisazide) and tetraethylene glycol diyne (TeEG‐diyne)/BA‐bisazide, are evaluated by differential scanning calorimetry (DSC), shear rheology, and thermogravimetric analysis. The effects of catalyst concentration on reaction kinetics are investigated in detail, as are the thermal properties (glass transition and decomposition temperatures) of the formed polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4093–4102, 2010     

Kinetic pathway investigations of three‐component photoinitiator systems for visible‐light activated free radical polymerizations

Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor, and an electron acceptor. To investigate the key factors involved with visible‐light activated free radical polymerizations involving three‐component photoinitiators and 2‐hydroxyethyl methacrylate, we used thermodynamic feasibility and kinetic considerations to study photopolymerizations initiated with either rose bengal or fluorescein as the PS. The Rehm–Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. It was concluded that key kinetic factors for efficient visible‐light activated initiation process are summarized in two ways: (1) to retard back electron transfer and recombination reaction steps and (2) to use a secondary reaction step for consuming dye‐based radical and regenerating the original PS (dye). Using the thermodynamic feasibility and kinetic data, we suggest three different kinetic mechanisms, which are (i) photo‐reducible series mechanism, (ii) photo‐oxidizable series mechanism, and (iii) parallel‐series mechanism. Because the photo‐oxidizable series mechanisms most efficiently allow the key kinetic factors, this kinetic pathway showed the highest conversion and rate of polymerization. The kinetic data measured by near‐IR and photo‐differential scanning calorimeter verified that the photo‐oxidizable series mechanism provides the most efficient kinetic pathway in the visible‐light activated free radical polymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 887–898, 2009     

Synthesis and functionalization of dendron‐polymer conjugate based hydrogels via sequential thiol‐ene “click” reactions

Fabrication and functionalization of hydrogels from well‐defined dendron‐polymer‐dendron conjugates is accomplished using sequential radical thiol‐ene “click” reactions. The dendron‐polymer conjugates were synthesized using an azide‐alkyne “click” reaction of alkene‐containing polyester dendrons bearing an alkyne group at their focal point with linear poly(ethylene glycol)‐bisazides. Thiol‐ene “click” reaction was used for crosslinking these alkene functionalized dendron‐polymer conjugates using a tetrathiol‐based crosslinker to provide clear and transparent hydrogels. Hydrogels with residual alkene groups at crosslinking sites were obtained by tuning the alkene‐thiol stoichiometry. The residual alkene groups allow efficient postfunctionalization of these hydrogel matrices with thiol‐containing molecules via a subsequent radical thiol‐ene reaction. The photochemical nature of radical thiol‐ene reaction was exploited to fabricate micropatterned hydrogels. Tunability of functionalization of these hydrogels, by varying dendron generation and polymer chain length was demonstrated by conjugation of a thiol‐containing fluorescent dye. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 926–934     

Synthesis and characterization of polyesteramides derived from an oxazoline-functional alcohol and dicarboxylic acid anhydrides

Novel polyesteramides were synthesized by copolymerization in bulk of 5-(4,5-dihydro-1,3-oxazol-2-yl)-1-pentanol and various cyclic dicarboxylic acid anhydrides at temperatures varying between 120 and 200°C. The polymers resulting from polycondensation were characterized by means of ¹H–NMR, FTIR, MALDI–TOF–MS, SEC, and DSC. The glass transition temperatures, T_g, of the copolymers were varied between −28 and +31°C as a function of the anhydride type. Molecular weights, M_w, were dependent on reaction temperature, reaction time, and anhydride type. Spectroscopic investigation of reaction products and esteramide model compounds provided evidence for imide by-product formation, which accounts for the low degree of polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3367–3376, 1999     

Effect of the alkylaluminum cocatalyst on ethylene polymerization by a nickel–diimine complex

Different chlorine-free alkylaluminum compounds were active cocatalysts for ethylene polymerization in the presence of 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine-dichloronickel (II) (1). The combination of 1 with trimethylaluminum or triisobutylaluminum produced catalytically active species that polymerized ethylene with productivities up to 469 kg_polymer/(mol_Ni · h). The activity of the catalytic system and the properties of the polymeric materials were influenced strongly by the reaction temperature. The polymers had a high molecular weight (up to 642 × 10³ g · mol⁻¹), and the molecular weight increased with the reaction time. The polyethylenes were branched, and the branching could be modulated by the proper choice of reaction parameters. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4656–4663, 1999     

Controlled free radical ring-opening polymerization and chain extension of the “living” polymer

Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (M_n) and the monomer conversion was observed with the best-fit line passing very close to the origin of the M_n-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998