A polymer of bisphenol A and bisphenol A diglycidyl ether and its blends with poly(styrene‐co‐acrylonitrile): In situ polymerization preparation,morphology, and mechanical properties

The poly(hydroxy ether of bisphenol A)‐based blends containing poly(acrylontrile‐co‐styrene) (SAN) were prepared through in situ polymerization, i.e., the melt polymerization between the diglycidy ether of bisphenol A (DGEBA) and bisphenol A in the presence of poly(acrylontrile‐co‐styrene) (SAN). The polymerization reaction started from the initial homogeneous ternary mixture of SAN/DGEBA/bisphenol A, and the phenoxy/SAN blends with SAN content up to 20 wt % were obtained. Both the solubility behavior and Fourier transform infrared (FTIR) spectroscopy studies demonstrate that no intercomponent reaction occurred in the reactive blend system. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electronic microscopy (SEM) were employed to characterize the phase structure of the as‐polymerized blends. All the blends display the separate glass transition temperatures (T_g's); i.e., the blends were phase‐separated. The morphological observation showed that all the blends exhibited well‐distributed phase‐separated morphology. For the blends with SAN content less than 15 wt %, very fine SAN spherical particles (1–3 μmm in diameter) were uniformly dispersed in a continuous matrix of phenoxy and the fine morphology was formed through phase separation induced by polymerization. Mechanical tests show that the blends containing 5–15 wt % SAN displayed a substantial improvement of tensile properties and Izod impact strength, which were in marked contrast to those of the materials prepared via conventional methods. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 525–532, 1999     

Synthesis of SiO2/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres via miniemulsion polymerization

A series of SiO₂/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres with various morphologies (e.g., multicore–shell, normal core–shell, and raspberry‐like) were synthesized via miniemulsion polymerization. The results showed that the morphology of the composite latex particles was strongly influenced by the presence or absence of the soft monomer (butyl acrylate), the particle sizes of the silica, and the emulsifier concentrations. The incorporation of the soft monomer helped in forming the multicore–shell structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3202–3209, 2006     

Tubular polypyrrole synthesized by in situ doping polymerization in the presence of organic function acids as dopants

Tubular polypyrrole (PPy) could be synthesized by in situ doping polymerization in the presence of β‐naphthalene sulfonic acid (NSA) as dopant. The resultant tubular PPy–NSA not only exhibits high room temperature conductivity (ς_RT = 10 S/cm) but is also soluble in m‐cresol. The molecular structure of PPy–NSA is identical to the characteristic structure of PPy synthesized by a conventional method. It has been demonstrated that NSA dopant with large molecular size and plate–lebe structure is a key factor to control formation of tubular PPy–NSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1443–1449, 1999     

Formation of the porous structure during the polymerization of meta-divinylbenzene and para-divinylbenzene with toluene and 2-ethylhexanoic acid (2-EHA) as porogens

Macroporous polymers of pure meta-divinylbenzene (meta-DVB) and pure para-divinylbenzene (para-DVB) have been prepared in the presence of toluene and 2-EHA as pore forming agents. The formation of the pore structure has been studied during the polymerization by pore-size distribution measurements, together with determination of the specific surface area from nitrogen sorption isotherms using the BET treatment. In addition, the morphology and texture have been characterized by SEM during the polymerization process. Large differences in the pore-size distribution among all the polymer samples are found. The polymers prepared in toluene as porogen have a pore-size distribution, which mainly consists of small pores, while large pores appear with 2-EHA as porogen. In the presence of 2-EHA, a major change in the pore-size distribution is also observed when the monomer is shifted from para-DVB to meta-DVB, leading to a bimodal distribution. The texture characterization by SEM shows details and discriminates the samples in consistency with what may be expected from pore-size distribution measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3973–3990, 1999     

Poly(hydroxyether of bisphenol A)/poly(vinyl acetate) blends: In situ polymerization preparation,morphology, and properties

The blends of poly(hydroxyether of bisphenol A) (phenoxy) and poly(vinyl acetate) (PVAc) were prepared through in situ polymerization, i.e., the melt polymerization of diglycidy ether of bisphenol A (DGEBA) and bisphenol A in the presence of PVAc. The polymerization reaction started from the initial homogeneous ternary mixture of PVAc/DGEBA/bisphenol A; the phase separation induced by reaction occurred as the polymerization proceeded. The phenoxy/PVAc blends with PVAc content up to 20 wt % were obtained and were further characterized by the solubility, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electronic microscopy (SEM). The results indicate that no intercomponent reaction occurred during the in situ polymerization. All the blends display separate glass transition temperatures (Tg's); the very fine phase-separated morphology was obtained by this polymerization blending method. Mechanical tests show that the prepared blends exhibited substantial improvement of mechanical properties, especially in impact strength, which could be ascribed to the formation of the fine phase-separation morphology during in situ polymerization. The thermogravity analysis (TGA) of the blends showed that the thermal stability of the PVAc-rich phases in the blends was enhanced in comparison to the pure PVAc due to the synergistic contribution of the two phases in energy transportation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2329–2338, 1999     

Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

Synthesis,characterization, and morphology of p‐toluene sulfonic acid‐doped polyaniline: A material for humidity sensing application

Polyaniline (PANI) doped with p‐toluene sulfonic acid was synthesized by chemical polymerization method using (NH₄)₂S₂O₈ as an oxidizing agent. This is a single step polymerization process for the direct synthesis of the conducting emeraldine salt (ES) phase, without the need of doping, dedoping, and redoping of the polymer. Presence of a free carrier tail at higher wavelength, characteristic of extended coil conformation along with a sharp polaronic peak is observed in the UV–vis spectrum of doped PANI in m‐cresol solvent. FT‐IR studies show the characteristic peaks of ES phase along with a sharp peak at 1120 cm^?1 representing vibration band of the dopant ion. Clumps of small fibers resulting in a sponge‐like structure was observed under scanning electron microscope. Thermal studies revealed a three‐step decomposition pattern. Conductivity is found to increase with an increase in the temperature showing “thermal activation behavior.” Decrease in resistance with increasing humidity is observed in a broad range of humidity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2161–2169, 2005     

Glass transition temperatures of butyl acrylate–methyl methacrylate copolymers

The glass transition temperatures T_g of butyl acrylate–methyl methacrylate copolymers obtained by free radical polymerization in 3 and 5 mol/L benzene solution have been measured using differential scanning calorimetry (DSC) and the values have been correlated using Johnston's equation with inter‐intramolecular copolymer structure. From the data calculated with copolymer prepared at low conversion, the variation of glass transition temperature with copolymer conversion has been theoretically predicted. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2512–2520, 1999     

Morphological development and rheological changes of phenoxy/SAN blends during in‐situ polymerization

This article reports the results of an investigation into the time‐dependent morphological and rheological changes that accompany the in‐situ polymerization of blends composed of poly(hydroxyether of bisphenol A) (phenoxy) and poly(styrene‐co‐acrylonitrile) (SAN). The rheological behavior was monitored continuously during the in‐situ polymerization, whereas the miscibility and phase structure of blends formed in situ were examined at discrete stages of polymerization by differential scanning calorimetry and transmission electron microscopy. In the blend with 30 wt % SAN, a co‐continuous blend morphology was associated with gradual changes in the dynamic moduli, suggesting that phase separation proceeded by spinodal decomposition (SD). In contrast, phenoxy‐rich dispersions were uniformly dispersed in a continuous SAN‐rich matrix in the blend with 50 wt % SAN, and the corresponding rheological signature revealed a sharp initial increase in the dynamic moduli, followed by slower growth after long times, indicative of phase separation via nucleation and growth (NG). The rheological property changes are closely related to morphology development and mechanisms of phase separation induced duringin‐situ polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2614–2619, 2007     

Effect of monoacrylate type in UV curable PU acrylate based bicontinuous polymer/liquid crystal networks

Polymer network liquid crystals (PNLC) have been prepared from ultraviolet-curable polyurethane acrylate (PUA) and a nematic liquid crystal mixture (BL002). Effects of monoacrylate type on film morphology, temperature-dependent off-state transmittance, and electro-optic performance of the film have been studied. Among three types of monoacrylates incorporated (EHA(2-ethyl hexyl acrylate), MMA (methylmethacryalte), NVP (N-vinylpyrrolidone)), EHA-based PUAs gave the greatest polymer–LC phase separation, lowest threshold (V₁₀), and operating (V₉₀) voltages, and the effect was more pronounced in monoacrylate/triacrylate systems than in monoacrylate/diacrylate systems. Contact angle measurement offers a clue to the observed morphology and electro-optic behavior. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1393–1399, 1998     

Novel network morphology of poly(p‐oxybenzoyl)

Polymerization of 4‐acetoxybenzoic acid (ABA) with 3,5‐diacetoxybenzoic acid (DABA) was examined to control the morphology of poly(p‐oxybenzoyl) (POB). Polymerizations were carried out at a concentration of 1.0% in an aromatic solvent Therm S‐1000® (mixture of dibenzyltoluene) at 320 °C. Polymerization of ABA yielded the POB fibrillar crystals, but the polymerization with DABA at a concentration in the feed (χ_f) of 0.10–0.15 afforded novel network structures comprised of spheres connected by fibrillar crystals. The diameter of the spheres prepared at χ_f of 0.15, which were 0.7 and 5.0 μm, showed bimodality. The network distance, fibril length, and fibril width were 6.1, 2.6, and 0.1 μm, respectively. They possessed high crystallinity. The network structure was formed as follows. Co‐oligomers were first precipitated in the beginning of the polymerization by liquid–liquid phase separation to form the microdroplets. The fibrillar crystals were formed in the coalesced spheres by the crystallization of oligomers induced by the increase of molecular weight. The fibrillar crystals connecting the spheres gradually appeared owing to the shrinkage of the spheres. The fibrillar crystals grew from the surface of the spheres with the crystallization of homo‐oligomers of 4‐oxybenzoyl units, and finally the network structure was completed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1624–1634, 2005     

Vinyltitanium as an initiator for the polymerization of acetylene

The preparation of lustrous conducting polyacetylene films by the polymerization of acetylene with vinyltitanium species as initiators was studied. Organotitanium species were generated by the alkylation of titanium vinylcarbene complexes with tert‐butyl chloride. Solid‐state ¹³C NMR and IR analyses of the obtained polyacetylene indicated that polyacetylene with a trans configuration was produced. The use of titanocene(II) species Cp₂Ti[P(OEt)₃]₂ and titanium vinylcarbene complexes for the preparation of polyacetylene films was also studied. The morphology of the films and the mechanisms of polymerization are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2663–2669, 2002     

Synthesis of tailor‐made polyethylene through the control of polymerization conditions using selectively combined metallocene catalysts in a supported system

Tailoring of the molecular weight distribution (MWD) in ethylene polymerization was attempted by selectively combining different types of metallocene catalysts onto a single support. The catalyst produced by supporting Et[Ind]₂ZrCl₂ and Cp₂HfCl₂ onto a single MAO pretreated silica support was able to produce polymers with unimodal or bimodal MWD's. This approach permits the synthesis of polyethylene with different MWD's using the same catalyst as a function of the polymerization conditions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 331–339, 1999     

Morphology,crystal structure,and orientation of poly-p-oxybenzoate on mica

Polymerization of p-acetoxybenzoic acid between mica sheets, from both the melt and dilute solution, in a wide range of polymerization temperatures (180–400°C) yields an epitaxial-like overgrowth of PpOBA on the mica cleavage surface. The PpOBA overgrowth forms long rows by lateral aggregation of ribbon crystals situated in three substrate directions rotated by 60°. The c-axes of the PpOBA phase I and II lattices are parallel to the 001 plane of the mica, coinciding with the a-axes of the mica hexagonal structure. The a_I- and b_II-axes lie predominantly on the mica surface. The surface-orienting effect is tentatively attributed to surface steps and or/polar effects; lattice matching does not occur. The recrystallization of bulk polymer samples previously prepared also leads to ordering between mica like that in melt or solution polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1807–1820, 1997     

Controlled/living heterogeneous radical polymerization in supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) is an inexpensive and environmentally friendly medium for radical polymerizations. ScCO₂ is suited for heterogeneous controlled/living radical polymerizations (CLRPs), since the monomer, initiator, and control reagents (nitroxide, etc.) are soluble, but the polymer formed is insoluble beyond a critical degree of polymerization (J_crit). The precipitated polymer can continue growing in (only) the particle phase giving living polymer of controlled well‐defined microstructure. The addition of a colloidal stabilizer gives a dispersion polymerization with well‐defined colloidal particles being formed. In recent years, nitroxide‐mediated polymerization (NMP), atom transfer radical polymerization (ATRP), and reversible addition fragmentation chain transfer (RAFT) polymerization have all been conducted as heterogeneous polymerizations in scCO₂. This Highlight reviews this recent body of work, and describes the unique characteristics of scCO₂ that allows composite particle formation of unique morphology to be achieved. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3711–3728, 2009     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007     

Morphology and properties of cyanate ester/liquid polyurethane/silica nanocomposites

The high‐speed homogeneous shearing method was applied to prepare nanocomposites of cyanate ester (CE) with liquid polyurethane elastomer (PUR) and silica. To investigate the influence of various components on the morphology and properties of the ternary composites, the binary composites of CE/PUR and CE/silica were also involved in this article. The morphology of the cured materials of binary and ternary systems was investigated by transmission electron microscopy (TEM), and the results show that silica nanoparticles were uniformly distributed in the ternary and binary matrix. Phase separation of elastomer in composites was not observed by TEM. FTIR test and dynamic mechanical analysis (DMA) proved that chemical linking was existent between PUR and CE. Scanning electron microscopy examinations and mechanical properties tests were carried out. The results show that ternary composites displayed higher fracture toughness and impact strength compared with most of the binary systems. This suggests that the addition of PUR and nanosilica can synergistically improve the toughness of CE. DMA studies confirmed that the incorporation of silica can increase the storage modulus and T_g for CE and CE/PUR system, since there are a good adhesion and a strong hydrogen bonding between silica and polymers. The thermal property of ternary composites increases with the increase of silica nanoparticle loading. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1243–1251, 2008     

Morphology,crystalline structure,and properties of poly(vinylidene fluoride)/silica hybrid composites

Poly(vinylidene fluoride)/silica (PVDF/SiO₂) hybrid composite films were prepared via sol–gel reactions from mixtures of PVDF and tetraethoxysilane in dimethylacetamide. Their morphology, crystalline structure, and thermal, mechanical, and electrical properties were examined. For morphology measurements, scanning electron microscopy and optical microscopy were applied. X‐ray diffraction and infrared analyses showed that the crystalline structure of PVDF was not changed much by the addition of SiO₂, indicating that there was no interaction between PVDF and SiO₂. With increasing SiO₂ content, the melting temperature rarely changed, the degree of crystallinity and the dielectric constant decreased, and the decomposition temperature slightly increased. A PVDF/SiO₂ hybrid composite film with 5 wt % SiO₂ exhibited balanced mechanical properties without a severe change in the crystalline structure of PVDF, whereas for the hybrid composites with higher SiO₂ contents (>10 wt %), the mechanical properties were reduced, and the spherulite texture of PVDF was significantly disrupted by the presence of SiO₂ particles. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 19–30, 2002     

Poly(acrylonitrile) ultrafiltration membranes. II. Membrane morphology and permeation characteristics

The rheology and phase‐boundary characteristics of various solutions comprising three polyacrylonitrile (PAN) grades dissolved in solutions of N,N‐dimethylformamide + salt (LiCl, ZnCl₂, or AlCl₃) additives were correlated with the resulting membrane morphology as determined by microscopy and permeability measurements. The phase separation characteristics of the dope solution were not markedly affected by the PAN molecular weight (MW); however, they were affected by the salt additive. For higher MW grades, the effect of salt addition can also be masked by the increased self‐association tendency of the polymer chains. PAN‐B and ‐C membranes were clearly less asymmetric in structure than the lower MW PAN‐A–based membranes. This is attributed to the higher viscosity/lower diffusivity of the PAN‐B and ‐C solutions, which results in slower solvent–nonsolvent exchange during the phase inversion process. Two factors reduce the incidence of surface defects (increased bubble points): (a) higher solution viscosity dampens surface perturbations during phase inversion, and (b) phase inversion pathways resulting in more homogenous morphology lead to membranes with higher bubble points. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2074–2085, 2005     

Morphological behavior of model poly(ethylene‐alt‐propylene)‐b‐polylactide diblock copolymers

A set of well‐defined poly(ethylene‐alt‐propylene)‐b‐polylactide (PEP‐PLA) diblock copolymers containing volume fractions of PLA (f_PLA) ranging between 0.08 and 0.91 were synthesized by a combination of living anionic polymerization, catalytic hydrogenation, and controlled coordination‐insertion ring‐opening polymerization. The morphological behavior of these relatively low‐molecular‐weight PEP‐PLA diblock copolymers was investigated with a combination of rheology, small‐angle X‐ray scattering, and differential scanning calorimetry. The ordered microstructures observed were lamellae (L), hexagonally packed cylinders (C), spheres (S), and gyroid (G), a bicontinous cubic morphology having Ia3 d space group symmetry. The G morphology existed in only a small region between the L‐C morphologies in close proximity to the order–disorder transition (ODT). Transformations from L to G were observed upon heating in several samples. The efficacy of the reverse G to L transition in one sample was cooling rate dependent. The PEP‐PLA Flory–Huggins interaction parameter as a function of temperature χ_PEP‐PLA(T) was estimated from T_ODT's by mean‐field theory and subsequently used in the construction of the experimental PEP‐PLA morphology diagram (χN versus f_PLA). The resultant morphology diagram was symmetric there were the well‐defined L‐C morphology boundaries. The low molecular weight of the materials imparted no significant deviation from previously documented diblock systems. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2364–2376, 2002