Synthesis,structure and antimicrobial study of two new copper(II) complexes derived from N-(3-aminopropyl) benzylamine ligand (apba) and N-salicylidene-apba

Two new copper(II) complexes were synthesized by reaction of N-(3-aminopropyl)benzylamine (L1: apba, for complex 1) and N-salicylidene-apba (L2: for complex 2) with Cu²⁺. Crystals of complex 1 were orthorhombic, space group pccn, with a?=?15.2149(10), b?=?25.0071(16), c?=?7.6280(5)?Å and α?=?β?=?γ?=?90°. Complex 2 crystals were monoclinic, space group P2₁/c, with a?=?8.688(6), b?=?12.812(9), c?=?16.022(11)?Å and β?=?99.241(10)°. Structures of the two complexes were centro-symmetric and both Cu(II) atoms were four coordinate with a distorted square-planar geometry. The toxicity of the complexes was evaluated by testing antimicrobial activity against bacterial strands.     

Modified polysulfones. VI. Preparation of polymer membrane materials containing benzimine and benzylamine groups as precursors for molecularly imprinted sensor devices

A modified polysulfone containing benzylamine groups was synthesized as a reactive membrane material. Polysulfone was activated at the ortho‐sulfone site by direct lithiation with n‐butyllithium, and the resulting lithiated polysulfone was then reacted with benzonitrile; this yielded a polymer with pendant benzimine groups. The structure was confirmed by NMR and IR spectroscopy and by the transformation of imine to ketone by acid hydrolysis. The polymeric benzimine was also reduced to benzylamine with sodium cyanoborohydride in an acidic medium. The structure and degree of substitution of both benzylamine derivatives were determined by NMR and IR spectroscopy. The modified polysulfone containing benzylamine groups initiated the polymerization of N‐carboxyanhydride of γ‐benzyl‐L ‐glutamate [Glu(OBzl)–NCA]. The side‐chain oligopeptide of Glu(OBzl)–NCA attached to polysulfone was converted into molecular recognition sites. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1316–1329, 2003     

Reactions of 5,6,7,8-tetrafluoro-4-hydroxycoumarin derivatives with benzylamine and aniline

5,6,7,8-Tetrafluoro-4-hydroxycoumarin reacted with benzylamine under mild conditions to give a stable salt, while its refluxing with aniline or benzylamine in xylene afforded 5,6,7,8-tetrafluoro-4-phenyl(benzyl)aminocoumarins. Reactions of 3-acetyl(acetimidoyl)-5,6,7,8-tetrafluoro-4-hydroxycoumarins with benzylamine followed different pathways, depending on the solvent. Condensation at the acyl substituent can be accompanied by replacement of the F atom in position 7. 3-Acetylcoumarin formed a salt, while 3-acetimidoylcoumarin yielded a 7-monosubstituted product. 3-Acetyl(acetimidoyl)-5,6,7,8-tetrafluoro-4-hydroxycoumarins reacted with aniline to give only 5,6,7,8-tetrafluoro-4-hydroxy-3-(N-phenylacetimidoyl)coumarin. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1170–1174, July, 2006.     

Determination of the acid dissociation constants of N-carboxymethyl-N-(p-hydroxy phenyl carbamoylmethyl)-2,3-dihydroxy-5-carbomethoxy benzylamine and the stability constants of its metal complexes

The acid dissociation constants of N-carboxymethyl-N-(p-hydroxy phenyl carbamoyl-methyl)-2,3-dihydroxy-5-carbomethoxy benzylamine (CHDCB) and the stability constants of its 1:1 complexes with alkaline earth, Cd(II), Co(II), Ni(II), Cu(II), Zn(II), Fe(III), Th(IV) and U(VI) ions have been determined at 25.0 ± 0.1 °C and at an ionic strength of 0.1 (KNO₃) by pH titration method. The probable coordination sites have also been discussed.     

Thermal 1,3-proton shift reaction and its application for operationally convenient and improved synthesis of α-(trifluoromethyl)benzylamine

This paper describes a synthesis of α-(trifluoromethyl)benzylamine via a novel base-free biomimetic reductive amination of α,α,α-trifluoroacetophenone with benzylamine. When the corresponding imine, derived from α,α,α-trifluoroacetophenone and benzylamine was heated at 200 °C under N₂ for 1 day, the thermal 1,3-proton shift reaction took place giving rise to the N-(benzylidene)-α-(trifluoromethyl)benzylamine in quantitative yield. This thermal 1,3-proton shift reaction was used a key step in the development of new and substantially simplified, practical and operationally convenient procedure for preparation of the target α-(trifluoromethyl)benzylamine on large scale.     

Synthesis,polymerization, and curing of N‐substituted citraconimidyl acrylate

Several N‐(substituted phenyl) citraconimides containing phenolic hydroxyl groups (I) were prepared. I were esterified with acryloyl chloride producing the corresponding acrylate esters (II). II were free radically polymerized yielding linear polyacrylates (III). The citraconimidyl vinyls did not participate in the polymerization. The resulting polymers (III) were cured thermally or through the crosslinking agent N,N‐(p‐phenylene)dimaleimide. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 427–433, 1999     

Synthesis,characterization, and hydrolysis of PVAc-PS-PVAc via charge transfer polymerization

An ABA triblock copolymer of polyvinyl acetate-b-polystyrene-b-polyvinyl acetate (PVAc-PS-PVAc) was successfully synthesized with a binary system composed of polystyrene with N,N-dimethylaniline end groups (PS_da) and benzophenone to initiate the polymerization of vinyl acetate under UV irradiation. The PS_da was obtained by capping the living polystyrene macrodianion with p-(dimethylamino) benzaldehyde in excess. The PVA-PS-PVA could then be obtained by hydrolysis of PVAc-PS-PVAc in the sodium ethoxide benzene solution. The intermediates and desirable copolymers were characterized by GPC, IR, and ¹H-NMR in detail. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2595–2600, 1999     

Molecular weight distribution of polyamides obtained in anionic polymerization of methyl-substituted β-lactams and aminolysis of their N-benzoyl lactams

The anionic ring-opening polymerization of 3-methyl-2-azetidinone ( 3 ) in a mixture of N,N-dimethylacetamide with lithium chloride proceeded quantitatively in a homogeneous phase at 25°C, as well as the living anionic polymerization of 3,3-dimethyl-, 4,4-dimethyl-2-azetidinone ( 1 and 2 respectively) in a similar condition. However, the molecular weight dispersion of the polyamide obtained from 3 was found to be higher than that obtained from 1 and 2. The aminolysis reaction of their N-benzoyllactams and N-acyllactams corresponding to their growing species with benzylamine was investigated kinetically, and one of the reasons for broadening of the molecular weight distribution of the polyamide obtained in the anionic polymerization of 3 was speculated to result from a low value of the ratio of the initiation reaction constant to the propagation one. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1831–1838, 1997     

Study on side-chain second-order nonlinear optical polyimides based on novel chromophore-containing diamines. I. Synthesis and characterization

Side-chain second-order nonlinear optical polyimides were prepared from four novel chromophore-containing diamines and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride by a traditional two-step process that included a solution polycondensation followed by a chemical imidization. The four diamines were 2,4-di-β-aminoethylamino-6-p-nitrophenylamino-1,3,5-triazine (M1), 4-nitro-4′-[N-(4,6-di-β-aminoethylamino)-1,3,5-triazin-2-yl]amino azobenzene (M2), 2,4-di-p-aminophenylamino-6-p-nitrophenylamino-1,3,5-triazine (M3), and 4-nitro-4′-[N-(4,6- di-4-aminophenylamino)-1,3,5-triazin-2-yl]amino azobenzene (M4). All the polyimides exhibited maximum ultraviolet-visible absorption peaks or shoulders of chromophores at wavelengths below 400 nm, and those based on M1 and M3 were transparent at wavelengths above 450 nm, whereas those based on M2 and M4 were transparent at wavelengths above 550 nm. The polyimides possessed high glass-transition temperatures (T_g's; 218–247 °C) and thermal decomposition temperatures. They were soluble in aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethyl acetamide, N,N-dimethyl formamide, and dimethylsulfone. Some were even soluble in common low-boiling-point solvents such as tetrahydrofuran. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4330–4336, 1999     

Application of selective 1 : 2 addition of ketene N,N-acetal and isocyanates to novel polyamide syntheses

1,1-Bis(dimethylamino)ethylene (ketene N,N-acetal) (1) reacted with isocyanates to give either 1 : 1 adduct 3,3-bis(dimethylamino)acrylamides (3) or 1 : 2 adduct bis(dimethylamino)methylenemalonamides (4), depending on the amount of the charged isocyanate. 3 was obtained selectively in the case of isocyanate/1 = 1, while 4 was exclusively yielded in the case of isocyanate/1 = 2. Isothiocyanate showed similar reaction behavior as isocyanate. Polyaddition of 1 with diisocyanates afforded polyamides bearing a bis(dimethylamino)methylenemalonamide group with higher molecular weight. The obtained novel polyamides are soluble in various organic solvents, and reacted with diacid chloride to give crosslinked polymer quantitatively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3079–3086, 1999     

Reactivity of (2‐methylsulfanyl‐4‐oxo‐6‐phenyl‐4h‐pyrimidin‐3‐yl)‐acetic acid methyl ester towards hydrazine hydrate and benzylamine

The title ester 1 reacted with hydrazine hydrate to give hydrazide 2 , which underwent intramolecular cyclization to yield 1‐amino‐7‐phenyl‐1H‐imidazo[1,2‐a]pyrimidine‐2,5‐dione ( 3 ) or took place in a substitution reaction with benzylamine to form N‐benzyl‐2‐(2‐benzylamino‐4‐oxo‐6‐phenyl‐4H‐pyrimidin‐3‐yl)‐acetamide ( 4 ). The reaction of ester 1 with benzylamine gave corresponding amide 7 , disubstituted derivative 4 or 1‐benzyl‐7‐phenyl‐1H‐imidazo[1,2‐a]pyrimidine‐2,5‐dione ( 8 ) depending on the reaction conditions.     

Amine-quinone polyurethanes: Preparation of polyurethane segmented block copolymers containing 2,5-bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoquinone,toluene diisocyanate,and an oligomeric polyether diol

The amine-quinone diol monomer 2,5-bis(N-2-hydroxyethyl-N-methylamino)-1,4-benzoquinone (AQM-1) was prepared by the condensation of 2-(N-methylamino)ethanol with hydroquinone in the presence of oxygen and copper(II) chloride. This crystalline monomer was used to prepare a series of amine-quinone polyurethanes by condensation polymerization, either in the melt or in DMF solution, with toluene diisocyante and an oligomeric diol either poly(1,2-butylene glycol) or polytetrahydrofuran. The amine-quinone functional group was incorporated into the polymer mainchain, giving red-brown polyurethanes that had molecular weights in the range of 20,000–80,000 and were soluble in THF, MEK, DMF, and DMSO. The thermal properties were consistent with a two-phase morphology with an amorphous soft segment, containing the oligomeric diol, and a microcrystalline hard segment, containing AQM-1. These polymers had a high affinity for the surface of commercial iron particles used in state of the art magnetic tape and prevented the corrosion of the particles. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2339–2345, 1999     

Hydrogen‐transfer polymerization of vinyl monomers derived from 4‐methylbenzoyl isocyanate and acrylamide derivatives

The anionic polymerization of N‐acryloyl‐N′‐(4‐methylbenzoyl)urea (1) was carried out at 80°C for 24 h in DMF, DMSO, acetonitrile, or toluene by t‐BuOK or DBU (3 mol %) as an initiator to obtain polymer 3 in a good yield. The structure of 3 was dependent upon the initiator used, in which t‐BuOK selectively conducted the hydrogen‐transfer polymerization, while DBU partially induced the vinyl polymerization (16–20%). Likewise, N‐acryloyl‐N‐methyl‐N′‐(4‐methylbenzoyl)urea (2, i.e., an N‐methylated derivative of 1) was subjected to the hydrogen‐transfer polymerization. Although the yield of the polymer was lower in comparison with 1, the structure of the obtained polymer 4 was similarly governed by the initiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 465–472, 1999     

Substituent effect of the ester moiety of epoxysuccinates on the polycondensation with diamine

Di‐2,2,2‐trichloroethyl cis‐epoxysuccinate, di‐2‐cyanoethyl cis‐epoxysuccinate, and di‐2‐methoxyethyl cis‐epoxysuccinate were synthesized, and the substituent effect of the epoxysuccinates on the polycondensation with diamine was studied. The order of reactivities of the epoxysuccinates with m‐xylylenediamine was as follows: di‐trichloroethyl ester ≫ di‐cyanoethyl ester > di‐methoxyethyl ester, such was also confirmed by the model reaction of the epoxysuccinate with benzylamine. ¹H NMR and IR spectroscopic study and ab initio calculation also well explained the reactivity order. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 504–508, 2000     

A V-shaped ligand bis(N-methylbenzimidazol-2-ylmethyl) benzylamine with its cobalt(II) complex: synthesis,crystal structure,DNA-binding properties,and antioxidant activity

A V-shaped ligand bis(N-methylbenzimidazol-2-ylmethyl)benzylamine (bmbb) and its cobalt complex, [Co(bmbb)₂](pic)₂ (pic?=?picrate), have been synthesized and characterized by physico-chemical and spectroscopic methods. Single-crystal X-ray revealed that the coordination sphere around Co(II) is distorted octahedral with an N₆ ligand set from two tridentate bmbb. The DNA-binding properties of bmbb and the Co(II) complex were investigated by spectrophotometric and viscosity measurements. The results suggest that bmbb and Co(II) complex both bind to DNA via intercalation, and the Co(II) complex binds to DNA more strongly than bmbb. The Co(II) complex also exhibited potential antioxidant properties in vitro studies.     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Optically active poly(amide–imide)s containing axially dissymmetric 1,1′-binaphthyl moieties

Novel optically active aromatic poly(amide–imide)s (PAIs) were prepared from newly synthesized 2,2′-bis(3,4-dicarboxybenzamido)-1,1′-binaphthyl dianhydride ((+ )-, (S)-, and (R)-BNDADA). PAIs based on dianhydride monomers with different ee % were investigated with respect to their structures and chiroptical properties. These polymers were highly soluble in polar aprotic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, etc., and showed high glass transition temperatures of 287–290°C and 5% weight loss temperatures of 450–465°C in nitrogen. Optically active PAIs exhibited high specific rotations, excellent optical stabilities, and a dependence of optical activities on temperature. Investigations on chiroptical properties indicated that chiral conformation was possessed by optically active PAIs. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3147–3154, 1999     

Unusual scission of 3,7-dichlorobisisothiazolo[4,5-b:4",5"-e]pyrazine by nucleophiles

The reaction of 3,7-dichlorobisisothiazolo[4,5-b:4",5"-e]pyrazine with MeONa in MeOH afforded 3-chloro-5,6-dimethoxyisothiazolo[4,5-b]pyrazine. The reactions of the former with benzylamine, morpholine, and aniline gave rise to the corresponding N,N"-bis(5-amino-3-chloroisothiazol-4-yl)diazenes. In the case of benzylamine, 3,7-bis(benzylamino)bisisothiazolo[4,5-b:4",5"-e]pyrazine was isolated as a by-product. The crystal structure of N,N"-bis(5-benzylamino-3-chloroisothiazol-4-yl)diazene was established by X-ray diffraction analysis.     

Liposome fusion induced by pH-sensitive copolymer: Poly(4-vinylpyridine-co-N,N′-diethylaminoethyl methacrylate)

Copolymers of 4-vinylpyridine (4VP) or N,N′-diethylaminoethyl methacrylate (DEAEMA) were synthesized with various comonomer feed ratios (30 : 70, 50 : 50, and 70 : 30). Charge densities along the polymeric chain were changed in a pH-dependent manner. The copolymers induced membrane fusion of negatively charged liposomes followed by aggregation in a pH-dependent manner, which was investigated by resonance energy transfer. It was found that pH-dependent fusion of liposomes was dependent on the composition of 4VP and DEAEMA in the copolymer with the degree of protonation proportional to the difference in pK_a value of the two monomers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2305–2309, 1999     

Synthesis and characterization of poly(ether naphthalimide)s

A series of new poly(ether imide)s containing the naphthalimide moiety were prepared from bis(4-fluorobenzoyl)naphthalimides and several bisphenols by aromatic nucleophilic displacement polymerization. These polyimides had inherent viscosities in the range of 0.31–1.04 dL/g in chloroform and glass transition temperatures of 283.0–341.6°C by differential scanning calorimetry. The onset temperature for 5% weight loss for all the polymers was over 448°C, as assessed by thermogravimetry at a heating rate 10°C/min in nitrogen. In addition, these novel polyimides exhibited good solubility in organic solvents including N-methyl-2-pyrrolidone, N,N-dimethylformamide, N,N-dimethylacetamide, 1,1,2,2-tetrachloroethane and chloroform. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3227–3231, 1999