Temperature‐induced phase transition of poly(N‐n‐propylacrylamide‐co‐butyl methacrylate‐co‐N,N‐diethylaminoethyl methacrylate)

Terpolymers composed of N‐n‐propylacrylamide (NPAAm), butyl methacrylate (BMA), and N,N‐diethylaminoethyl methacrylate (DEAEMA) were prepared in an attempt to investigate the temperature‐induced phase transition and its mechanism. Poly(NPAAm) showed the lower critical solution temperature (LCST) around 24°C in water. With the incorporation of DEAEMA with NPAAm, the LCST change was characterized by an initial increase. However, the LCST was shifted to the lower temperature at the later stage. This might be explained in terms of hydrophilic/hydrophobic contribution of DEAEMA to the LCST. The swelling behavior of copolymer gel in the various solvents and spin‐lattice relaxation time (T₁) study by NMR strongly suggested the hydrophilic/hydrophobic contribution of DEAEMA to the LCST depending on the local environment. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1407–1411, 1999     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

Effect of lithium perchlorate on the spontaneous copolymerization of 4‐vinylpyridine with various electron‐rich vinyl monomers

The spontaneous copolymerization of 4‐vinylpyridine (4‐VP) activated with lithium perchlorate (LiClO₄) with various electron rich monomers (p‐methoxystyrene, MeOSt; p‐methylstyrene, MeSt; styrene, St) was investigated in various solvent systems at 75°C. Increasing the LiClO₄ concentration and the nucleophilicity of the electron rich monomer increased the copolymer yields. Both ¹H‐NMR and elemental analysis confirmed the almost 1:1 copolymer structure for VP/MeOSt system which possessed high molecular weight and narrow polydispersity (PDI). Compared to 4‐VP activated with zinc chloride, LiClO₄ systems showed slightly lower yields and much narrower PDI. We also investigated the spontaneous copolymerization of 4‐VP activated with various protic acids in the reaction with various electron rich comonomers. However, generally protic salt forms showed less solubility in organic solvents and showed low molecular weight polymer products with low yields. The proposed initiation mechanism exhibits the formation of a σ‐bond between the β‐carbons of the two donor‐acceptor monomers, creating the 1,4‐tetramethylene biradical intermediate initiating the copolymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1709–1716, 1999     

Bulk polymerization of N-vinylcarbazole initiated by C60

In this communication, we first used [60]fullerene as initiator to initiate the bulk polymerization of N-vinylcarbazole (NVC) monomer at 70°C (slightly higher than the melting point temperature, 65°C, of NVC). A reasonable polymerization reaction pathway via C₆₀-NVC ion-radical pairs is suggested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3745–3747, 1999     

Stereoregular control of poly(4‐vinyl pyridine) on free radical polymerization by using the inclusion complex with randomly methylated β‐cyclodextrin

Highly heterotactic poly(4‐vinyl pyridine)s (P4VPs) with the fraction of mr content (f_mr) > 0.81 were synthesized by free radical polymerization of 4‐vinyl pyridine (4VP) with randomly methylated β‐cyclodextrin (β‐RMCD) in acidic aqueous media of HNO₃ and CF₃COOH at 40 °C. The heterotacticity of P4VP strongly depended on the neutralization of 4VP. The complete neutralization of 4VP with HNO₃ or CF₃COOH increased the heterotacticity of P4VP, whereas atactic P4VP was obtained in water. The partial decomposition of β‐RMCD by HCl reduced the heterotacticity of P4VP (f_mr ≈ 0.74). The structures of inclusion complexed monomers were determined by Job's plot, 2D NMR with nuclear Overhauser enhancement spectroscopy analyses, and simulation by MM2. The 1:2 complex with [β‐RMCD]:[4VP] with meso placement of 4VPs in β‐RMCD was formed when 4VP was completely neutralized with acid, whereas the 1:1 complex was formed in water. The mechanism of heterospecific control by using β‐RMCD was proposed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Optical properties of the photorefractive polymeric composite with modified PVK polymer

Poly[N‐(2‐ethylhexyl)‐3‐vinylcarbazole has been synthesized by radical polymerization from N‐(2‐ethylhexyl)3‐vinyl‐carbazole. The 50‐μm thick photorefractive device containing 30 wt % piperidin‐4‐ylbenzylidene‐malononitrile showed a diffraction efficiency of 40% of 50 V/μm, which corresponded to a Δn of 0.8 × 10^?3. The photorefractive response time was τ₁ = 0.6 s. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1695–1702, 2009     

Controlled polymerizations of 2‐(dialkylamino)ethyl methacrylates and their block copolymers in protic solvents at ambient temperature via ATRP

Very well‐controlled polymerizations of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) in aqueous and methanolic solutions via atom transfer radical polymerization (ATRP) at ambient temperature were demonstrated. Poly(DMAEMA) and poly(DEAEMA) of low polydispersity index (PDI) of ～1.07 were obtained using the p‐toluenesulfonyl chloride/CuCl/1,1,4,7,10,10‐hexamethyl‐triethylenetetramine (p‐TsCl/CuCl/HMTETA) system. Excellent control of polymerization was achieved even in pure methanol. This is in contrast with the very poor control of DMAEMA ATRP in methanol reported previously using a different intiator/catalyst/ligand system. The initiator p‐TsCl underwent hydrolysis reaction in aqueous methanolic solutions with a second‐order rate constant of 6.1 × 10^?4 dm³ mol^?1 s^?1 at 25 °C. Both poly(DMAEMA) and poly(DEAEMA) retained almost full chlorine‐functionization at the chain ends. Well‐defined block copolymers of DEAEMA and DMAEMA were successfully obtained by starting with either macroinitiators of DEAEMA or DMAEMA. Other well‐defined diblock copolymers could be prepared using these macroinitiators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5161–5169, 2004     

Control of pore size and pore uniformity in films based on self‐assembling block copolymers

Blends of self‐assembling polystyrene‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) diblock‐copolymers and poly(4‐vinyl pyridine) (P4VP) homopolymers were used to fabricate isoporous and nanoporous films. Block copolymers (BCP) self‐assembled into a structure where the minority component forms very uniform cylinders, while homopolymers, resided in the core of the cylinders. Selective removal of the homopolymers by ethanol immersion led to the formation of well‐ordered pores. In films without added homopolymer, just immersion in ethanol and subsequent swelling of the P4VP blocks was found to be sufficient to create pores. Pore sizes were tuned between 10 and 50 nm by simply varying the homopolymer content and the molecular weight of the block‐copolymer. Uniformity was lost when the average pore size exceeded 30 nm because of macrophase separation. However, preparation of films from low M_W diblock copolymers showed that it is possible to have excellent pore size control and a high porosity, while retaining a low pore size distribution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1568–1579     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Synthesis and characterization of poly(fluorene)‐based copolymer containing triphenylamine group

The copolymers that are composed of poly(fluorene) (PF), poly(p‐phenylene), and Poly(p‐phenylenevinylene) as backbone and a large 4′‐(N,N′‐diphenylamino)diphenyl or 4′‐(N,N′‐diphenylamino)phenyl as pendent group were synthesized by the nickel(0)‐mediated polycoupling. The composition of the obtained copolymers was confirmed by H NMR. All the copolymers possessed a high weight‐average molecular weight and good solubility in common organic solvents. As the content of triphenyl amine pendants increases, the copolymers showed increased thermal stability due to increased glass transition temperature and increased hole injection ability because of decreased onset of the oxidation potential. In the photoluminescence spectra of copolymers, poly (BDAV₃₀‐co‐DHF₇₀) and poly(BDAPV₃₀‐co‐DHF₇₀) showed efficient energy transfer. indium tin oxide/poly(styrene sulfonate)‐doped poly(3,4‐ethylene dioxythiophene)/poly (BDAV₃₀‐co‐DHF₇₀)/LiF/Al device showed maximum brightness of 2267 cd/m² and efficiency of 0.80 cd/A, with turn‐on voltage at 9.1 V. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 172–182, 2006     

Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

Constructing novel double‐bond‐containing well‐defined amphiphilic graft copolymers via successive Ni‐catalyzed living coordination polymerization and SET‐LRP

A series of polyallene‐based well‐defined amphiphilic graft copolymers, poly(6‐methyl‐1,2‐heptadiene‐4‐ol)‐g‐poly(2‐(diethylamino)ethyl methacrylate) (PMHDO‐g‐PDEAEMA), was synthesized through the grafting‐from technique. First, double‐bond‐containing PMHDO backbone bearing pendant hydroxyls was prepared via [(η³‐allyl)NiOCOCF₃]₂‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO). The pendant hydroxyls in the homopolymer were then reacted with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. Finally, hydrophilic PDEAEMA side chains were formed by single electron transfer‐living radical polymerization (SET‐LRP) of 2‐(diethylamino)ethyl methacrylate (DEAEMA) in THF/H₂O initiated by the macroinitiator using CuCl/Me₆TREN as catalytic system to afford PMHDO‐g‐PDEAEMA graft copolymers. The narrow molecular weight distributions (M_w/M_n ≤ 1.35) and kinetics experiment showed the controllability of SET‐LRP graft copolymerization of DEAEMA. The critical micelle concentration (cmc) of PMHDO‐g‐PDEAEMA amphiphilic graft copolymer in aqueous media was determined by fluorescence probe technique and the relationships between cmc and pH or salinity were also investigated. Micellar morphologies were preliminarily explored using transmission electron microscopy. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and hydrolysis of PVAc-PS-PVAc via charge transfer polymerization

An ABA triblock copolymer of polyvinyl acetate-b-polystyrene-b-polyvinyl acetate (PVAc-PS-PVAc) was successfully synthesized with a binary system composed of polystyrene with N,N-dimethylaniline end groups (PS_da) and benzophenone to initiate the polymerization of vinyl acetate under UV irradiation. The PS_da was obtained by capping the living polystyrene macrodianion with p-(dimethylamino) benzaldehyde in excess. The PVA-PS-PVA could then be obtained by hydrolysis of PVAc-PS-PVAc in the sodium ethoxide benzene solution. The intermediates and desirable copolymers were characterized by GPC, IR, and ¹H-NMR in detail. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2595–2600, 1999     

Synthesis of miktoarm star amphiphilic block copolymers via combination of NMRP and ATRP and investigation on self‐assembly behaviors

The novel trifunctional initiator, 1‐(4‐methyleneoxy‐2,2,6,6‐tetramethylpip‐eridinoxyl)‐3,5‐bi(bromomethyl)‐2,4,6‐trimethylbenzene (TEMPO‐2Br), was successfully synthesized and used to prepare the miktoarm star amphiphilic poly(styrene)‐(poly(N‐isopropylacrylamide))₂ (PS(PNIPAAM)₂) via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMRP) techniques. Furthermore, the star amphiphilic block copolymer, poly (styrene)‐(poly(N‐isopropylacrylamide‐b‐4‐vinylpyridine))₂ (PS(PNIPAAM‐b‐P4VP)₂), was also prepared using PS(PNIPAAM)₂ as the macroinitiator and 4‐vinylpyridine as the second monomer by ATRP method. The obtained polymers were well‐defined with narrow molecular weight distributions (M_w/M_n ≤ 1.29). Meanwhile, the self‐assembly behaviors of the miktoarm amphiphilic block copolymers, PS(PNIPAAM)₂ and PS(PNIPAAM‐b‐P4VP)₂, were also investigated. Interestingly, the aggregate morphology changed from sphere‐shaped micelles (4.7 < pH < 3.0) to a mixture of spheres and rods (1.0 < pH < 3.0), and rod‐shaped nanorods formed when pH value was below 1.0. The LCST of PS(PNIPAAM)₂ (pH = 7) was about 31 °C and the LCST of PS(PNIPAAM‐b‐P4VP)₂ was about 35 °C (pH = 3). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6304–6315, 2009     

Synthesis and characterization of new cardo polyimides prepared from 5,5-Bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane

A new cardo diamine monomer, 5,5-bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane (II), was prepared in two steps with high yield. The monomer was reacted with six different aromatic tetracarboxylic dianhydrides in N,N-dimethylacetamide (DMAc) to obtain the corresponding cardo polyimides via the poly(amic acid) precursors and thermal or chemical imidization. All the poly(amic acid)s could be cast from their DMAc solutions and thermally converted into transparent, flexible, and tough polyimide films which were further characterized by x-ray and mechanical analysis. All of the polymers were amorphous and the polyimide films had a tensile strength range of 89–123 MPa, an elongation at break range of 6–10%, and a tensile modulus range of 1.9–2.5 GPa. Polymers V_c, V_e, and V_f exhibited good solubility in a variety of solvents such as N-methyl-2-pyrrolidinone (NMP), DMAc, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridine, γ-butyrolactone, and even in tetrahydrofuran and chloroform. These polyimides showed glass-transition temperatures between 274 and 299°C and decomposition temperatures at 10% mass loss temperatures ranging from 490 to 521°C and 499 to 532°C in nitrogen and air atmospheres, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2815–2821, 1999     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Syntheses and properties of organosoluble polyimides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4, 7‐methanohexahydroindan

A series of organosoluble aromatic polyimides (PIs) was synthesized from 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4,7‐methanohexahydroindan (3) and commercial available aromatic dianhydrides such as 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA), 4,4′‐sulfonyl diphthalic anhydride (SDPA), or 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropanic dianhydride (6FDA). PIs (III_c–f), which were synthesized by direct polymerization in m‐cresol, had inherent viscosities of 0.83–1.05 dL/g. These polymers could easily be dissolved in N,N′‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), pyridine, m‐cresol, and dichloromethane. Whereas copolymerization was proceeded with equivalent molar ratios of pyromellitic dianhydride (PMDA)/6FDA, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA)/6FDA, or BTDA/SDPA, or ½ for PMDA/SDPA, copolyimides (co‐PIs), derived from 3 and mixed dianhydrides, were soluble in NMP. All the soluble PIs could form transparent, flexible, and tough films, and they showed amorphous characteristics. These films had tensile strengths of 88–111 MPa, elongations at break of 5–10% and initial moduli of 2.01–2.67 GPa. The glass transition temperatures of these polymers were in the range of 252–311°C. Except for III_e, the 10% weight loss temperatures (T_d) of PIs were above 500°C, and the amount of carbonized residues of the PIs at 800°C in nitrogen atmosphere were above 50%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1681–1691, 1999     

A green epoxidation system with poly(4‐vinylpyridine) microsphere‐supported molybdenum catalyst

The immobilization of molybdenum (Mo) compounds on poly(4‐vinylpyridine) (P4VP) microspheres for catalytic epoxidation was reported. P4VP‐supported Mo compounds were highly efficient and selective for the epoxidation of cis‐cyclooctene using hydrogen peroxide (H₂O₂) as oxygen source. When ethanol was used as solvents, outstanding catalytic activity and selectivity were observed for Mo‐containing catalysts in the epoxidation of cis‐cyclooctene. A completely green epoxidation system based on H₂O₂ and cleaner solvent has been achieved, and the heterogenized Mo catalyst can be recovered for five times without loss of its activity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 558–562, 2010