Synthesis and characterization of side-chain liquid-crystalline poly(ether ester)s having p-substituted biphenyl mesogenic side groups

Several novel mesogenic spiro-orthoester monomers such as 1,6,10-trioxaspiro[4,5]decanes 4 , containing biphenyl mesogens at the C-8 positions of the five- and six-membered spirocyclic ring, through the alkylene spacers of different lengths were prepared by condensation reaction of the corresponding biphenyl mesogenic 1,3-propanediol 3 with 2,2-diethoxytetrahydrofuran, with 50–75% yields. Through cationic double ring-opening polymerization, carried out with boron trifluoride etherate as an initiator (5 mol % vs. monomer) in bulk at 150°C, spiro-orthoester monomers 4 afforded a novel class of side-chain thermotropic LC polymers with a poly(ether ester) as the main chain 8 . The liquid-crystalline properties of the spiro-orthoester monomers and the resulting polymers were examined by differential scanning calorimetry and optical polarized microscopy. Biphase separation was observed in the side-chain liquid-crystalline poly(ether ester)s upon annealing in the broad isotropic region. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2439–2455, 1998     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999     

Synthesis and cationic photopolymerization of 1‐butenyl and 1‐pentenyl ethers

Several 1‐butenyl and 1‐pentenyl ether monomers were prepared by the ruthenium catalyzed multistage double bond isomerization of the corresponding 3‐butenyl and 4‐pentenyl ethers and characterized. Employing tris(triphenylphosphine)ruthenium(II) dichloride as a catalyst, the isomerization of octyl 4‐pentenyl ether to octyl 1‐pentenyl ether in 60% yield could be achieved in 110 min at 200–205°C. Under similar conditions, 3‐butenyl octyl ether was isomerized to 1‐butenyl octyl ether in greater than 99% yield. The reactivities of both types of monomers in photoinitiated cationic polymerization were determined using real‐time infrared spectroscopy and the monomers were found to polymerize at very nearly the same rate in the presence of a diaryliodonium salt photoinitiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 199–209, 1999     

Synthesis and cationic photopolymerization of new silicon‐containing oxetane monomers

The cationic photopolymerization of oxetane‐based systems containing silicon monomers was investigated. For this purpose, three new silicon‐containing oxetane monomers were synthesized through a simple and straightforward synthetic method. The silicon‐containing monomers were added to a typical oxetane resin, 3,3′‐[oxydi(methylene)]bis(3‐ethyloxetane), in concentrations of 1–5 wt %. They exploited a certain surface tension effect without affecting the rate of polymerization. Enrichment only on the air side was achieved, which induced hydrophobicity in the photocured films, depending on the monomer structure and concentration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1415–1420, 2004     

High-molecular-weight copolyesters of dihydroxybenzophenones by ‘induced‘ copolyesterification using TsCl/DMF/Py as a condensing agent

Dihydroxybenzophenones and 4,4′-dihydroxydiphenylsulfone, which yield high-molecular-weight polyesters only difficultly by conventional methods, gave high-molecular-weight copolyesters through a two-stage copolycondensation involving initial induction of oligomerization with selected monomers followed by copolycondensation. The copolycondensation was studied by examining such factors as the kinds of initial monomers, their amounts, initial reaction times, and the order of reaction, and the results are explained in terms of oligomer distribution in the initial oligomerization as determined by GPC. Copolycondensation was also facilitated by lowering the temperature at the second stage of reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3625–3631, 1999     

Synthesis and cationic photopolymerization of epoxy‐functional siloxane monomers and oligomers

A series of difunctional silicon‐containing monomers were prepared with a novel method consisting of the monohydrosilation of an α,ω‐difunctional Si? H‐terminated siloxane with a vinyl‐functional epoxide or oxetane followed by the dehydrodimerization of the resulting Si? H‐functional intermediate. This method used simple, readily available starting materials and could be conducted as a streamlined one‐pot, two‐step synthesis. This novel method was also applied to the synthesis of several epoxy–silicone oligomers. The reactivities of these new monomers and oligomers were examined with Fourier transform real‐time infrared spectroscopy and optical pyrometry. Those monomers containing epoxycyclohexyl groups displayed excellent reactivity in cationic ring‐opening polymerization in the presence of lipophilic onium salt photoinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3056–3073, 2003     

Synthesis and characterization of liquid crystalline polyacrylates and non-liquid crystalline polypyrroles from bifunctional monomers

Two kinds of polymerizations of liquid-crystalline N-{{W-{4-[4-(11-acryloyloxy)undecanoxybenzoyl]biphenyleneoxy}alkyl}}pyrrole gave a side-chain liquid-crystalline polyacrylate containing pyrrole group and a non-liquid crystalline polypyrrole containing acrylate group. Liquid crystallinity was determined by DSC and optical polarizing microscope measurements. The monomers having hexyl or decyl group as the alkyl group exhibited an undefined smectic, smectic B, and smectic A phases on the heating stage. The radically polymerized polyacrylate derivatives containing the pyrrole group showed smectic A, smectic C, and undefined smectic phases on the cooling stage. On the other hand, soluble N-substituted polypyrrole derivatives containing the terminal acrylate group which were prepared by chemical oxidative polymerization by ferric chloride catalyst did not show liquid crystallinity. Structure analysis of the polypyrroles performed by ¹H and ¹³C-NMR and FT-IR spectroscopies demonstrated that the polymerization occurred at the pyrrole ring. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3877–3887, 1999     

Kinetic behavior in free-radical polymerization of isomer methacrylic monomers with active functional groups as side substituents

The kinetic behavior of the free-radical polymerization of 2-hydroxy-4-N-methacrylamidobenzoic acid (4-HMA) and 2-hydroxy-5-N-methacrylamidobenzoic acid (5-HMA) in a solution of N,N-dimethylformamide is described. The methacrylic monomers 4-HMA and 5-HMA were isomers in which the phenolic and carboxylic functional groups were in different positions on the side aromatic ring with respect to the methacrylamide group. Semiempirical (AM1 and PM3 treatments) and ab initio (6-31G**) quantum mechanical calculations indicated the existence of intramolecular H-bonding between the phenolic and carboxylic groups. These calculations also indicated a slightly higher reactivity of 4-HMA with respect to 5-HMA under the same experimental conditions as obtained from the frontier orbital interactions between the highest molecular orbital of the monomers and the singly occupied molecular orbital of the radical obtained by the reaction of a methyl radical with the corresponding monomer. Gravimetric study of the free-radical polymerization of 4-HMA and 5-HMA at several temperatures ranging from 50 to 150 °C demonstrated this behavior. The kinetic results obtained and the average molecular weights of the polymers prepared at different temperatures indicated that the monomer 4-HMA had a slightly higher reactivity at low temperatures (50–90 °C), whereas at higher temperatures (120–150 °C), the reactivity of both monomers became similar as a consequence of the “dead-end” radical polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4528–4535, 1999     

High-pressure synthesis and properties of aliphatic–aromatic polyimides via nylon-salt-type monomers derived from aliphatic diamines and benzophenonetetracarboxylic acid

Aliphatic polyimides (P-XBTA) having inherent viscosities of 0.4–1.4 dL/g were readily synthesized by the high-pressure polycondensation of the salt monomers, composed of aliphatic diamines having various methylene chain lengths (X = 4–12) and 3,3′,4,4′-benzophenonetetracarboxylic acid (BTA), under 200–250 MPa at 200–320°C. The salt monomers with odd-numbered methylene units were found to be more susceptible to crosslinking than those containing even-numbered methylene chains. The polyimides having even-numbered methylene units were highly crystalline, whereas those with odd-numbered methylene chains were crosslinked and therefore amorphous with only one exception, i.e., P-11BTA. The thermal behavior of these polymers was also studied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 39–47, 1998     

Synthesis and thermal properties of thermosetting bis-benzocyclobutene–terminated arylene ether monomers

A series of new bis-benzocyclobutene-endcapped arylene ether monomers was prepared and characterized. Whereas 2,6-bis(4-benzocyclobutenyloxy)benzonitrile (BCB-EBN) could be prepared in good yield using the standard procedure (K₂CO₃/NMP/toluene/Dean–Stark trap/120°C), other bis(benzocyclobutene) (BCB)-terminated monomers containing ether-benzophenone (BCB-EK), ether-phenylsulfone (BCB-ES), and ether-6F-benzoxazole (BCB-EBO) moieties were invariably contaminated by mono-endcapped products under similar reaction conditions. This can be attributed to a much greater activating effect of the nitrile group on the ortho-fluorides in the aromatic nucleophilic displacement reaction than the carbonyl, sulfonyl, and benzoxazolyl groups. However, the latter monomers could be synthesized (70–80%) from 4-trimethylsiloxybenzocyclobutene and respective aromatic fluorides in the presence of CsF at 140°C. Similar curing behaviors under N₂ (DSC: extrapolated onset and peak temperatures at 227–230° and 260–262°C, respectively) characterized all four monomers. BCB-EK, BCB-ES, and BCB-EBN showed melting transitions at 108, 119, and 146°C, in that order. As BCB-EBO contained more rigid benzoxazole segments, it only exhibited a glass transition (T_g) at 85°C prior to curing exotherm, after it had been previously heated to 125°C. The following T_gs were observed for the cured materials: BCB-EK (201°C), BCB-EBN (224°C), BCB-ES (264°C), and BCB-EBO (282°C). The relative thermal stability according to TGA (He) results is: BCB-ES < BCB-EBN < BCB-EK < BCB-EBO. Finally, the results from thermal analysis, infrared spectroscopic, and variable temperature microscopic studies indicated that the nitrile group plays an important role in the cure chemistry, thermal, and microstructural properties of BCB-EBN. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2637–2651, 1998     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Synthesis and stability study of dental monomers containing methacrylamidoethyl phosphonic acids

Three new dental monomers containing methacrylamidoethyl phosphonic acids were synthesized. The structures of the synthesized monomers were determined with electrospray mass spectrometry (ESMS), Fourier transform infrared, and NMR. The hydrolytic stabilities of the synthesized monomers and a commercial monomer, 2‐methacryloyloxyethyl phosphoric acid (MEP; used as a control), were studied with flow injection (FI)/ESMS, ¹H NMR, and ³¹P NMR analysis of a CD₃OD/D₂O (4:1 v/v) solution of each monomer before and after storage at 60 °C for 2 months. The ¹H NMR and ³¹P NMR chemical shifts of the monomers 2‐methacrylamidoethylphosphonic acid ( I ) and N,N′‐[4,4′‐(propane‐2,2‐diyl)‐bis(phenoxy‐2‐hydroxypropyl)]‐bis(2‐methacrylamidoethylphosphonic acid) ( II ) showed little change after storage at 60 °C for 2 months, but those of MEP changed significantly. FI/ESMS also showed that MEP was nearly completely decomposed, whereas monomers I and II remained largely intact. MEP could react with H₂ZrF₆ to form ternary zirconium fluoride complexes that were partially soluble in methanol, but all the monomers containing phosphonic acids formed precipitates. This study demonstrates that ESMS is a more sensitive and effective method than NMR for studying the hydrolytic stability or degradation of dental monomers. The new monomers containing methacrylamidoethyl phosphonic acids have higher hydrolytic stability than methacrylate phosphate monomers and may be used in dental bonding agents and other dental materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 99–110, 2007     

Effect of pendent oxyethylene moieties on the properties of aromatic polyisophthalamides

Twelve novel polyisophthalamides containing short sequences of oxyethylene as pendent substituents were synthesized by the reaction of three aromatic diamine monomers and four novel diacid monomers containing pendent oxyethylene units. Two of the diacid monomers were derived from 5‐hydroxyisophthalic acid and the other two diacid monomers were derived from 5‐aminoisophthalic acid. The polymers were prepared in high yield and high molecular weight by the phosphorylation method of polycondensation. All of the polymers were soluble in organic aprotic solvents at room temperature and gave creasable films by casting from solution. The mechanical properties of the films were reasonably good, with tensile strengths in the range of 70–100 MPa and moduli around 2.5 GPa. However, the presence of the oxyethylene side sequences greatly diminished the thermal resistance and the glass transition temperatures of the present polymers compared with wholly aromatic polyisophthalamides. A study was also made on the effect of the chemical composition on water uptake. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45:4671–4683, 2007     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Thermally and oxidatively stable thermosets derived from preceramic monomers

Monomers 1,3-bis(4-phenylethynylphenyl)tetramethyldisiloxane and 1,7-bis(4-phenylethynylphenyltetramethyldisiloxyl)-m-carborane were synthesized and compared with bis(4-phenylethynylphenyl)dimethylsilane as potential preceramic precursors. These monomers were heated to free flowing liquids above 100°C and thermally polymerized above 300°C to form heat-resistant thermosets or ceramic residues. The ceramic yields for the silane (13%) and siloxane (30%) were much lower than that for the carborane (64%) monomer. The thermoset and ceramic made from the carborane monomer were the best thermally and oxidatively stable materials. After curing, the thermoset had a weight loss of only 6% and after pyrolysis, the ceramic residue had no additional weight loss up to 1000°C in air. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1033–1038, 1997     

Synthesis and characterization of new highly permeable polyamideimides from dianhydride monomers containing amide functions: An application to the purification of a fuel octane enhancer (ETBE) by pervaporation

Six polyamideimides (PAI) were synthesized from six dianhydride monomers containing amide functions. The dianhydride monomers were obtained from the reaction of trimellitic anhydride chloride with six aromatic diamines—1,4‐phenylenediamine, 2,2‐bis(4‐aminophenyl) propane, 4,4′‐oxydianiline, 4,4′‐methylenedianiline, 1,1‐bis(4‐aminophenyl)cyclohexane, and bis(4‐aminophenyl)sulfone—by a low‐temperature condensation with yields ranging from 35 to 98% depending on the monomer solubility in organic media. The monomers were characterized by Fourier transform infrared (FTIR) and ¹H NMR. In accordance with a synthesis scheme implying the reaction of a macrodiisocyanate with dianhydride monomers containing amide functions, six PAIs with a highly flexible soft block (polytetramethylene glycol PTMG 650) were synthesized with inherent viscosities ranging from 0.38 to 1.3 dL/g. Their characterization by FTIR and ¹H NMR fully confirmed their chemical structure. The strong physical crosslinking provided by polar hard blocks containing up to eight aromatic rings enabled the casting of PAI films that were very tough in the dry state and could withstand exposure to rather strong solvating media (e.g., ethers, alcohols, and chlorinated solvents). First experiments showed these materials could be good candidates for membrane‐separation applications. They revealed interesting features for the separation of organic aprotic–protic mixtures as shown by the first results obtained for the purification of a fuel octane enhancer (ethyl‐tert‐butyl ether) used in the European Community. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 614–630, 2000     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and characterization of new aromatic polyamides bearing crown ethers or their dipodal counterparts in the pendant structure. II. Benzo‐15‐crown‐5 and ortho‐bis[2‐(2‐ethoxyethoxy)ethoxy]benzene

This article describes the synthesis and characterization of two diacid monomers, each containing a benzo‐15‐crown‐5 subunit or its dipodal counterpart. Both novel monomers were reacted with technical aromatic diamines with Yamazaki's direct polyamidation method to render modified polyisophthalamides with high molecular weights containing side moieties of cyclic and acyclic ethylene oxide sequences. All the polymers were soluble in aprotic polar solvents and showed high glass‐transition temperatures in the range of 190–345 °C. The polymers with side crown ethers showed much higher glass‐transition temperatures than those with acyclic linear side ethylene oxide arms. The chemical composition, particularly with respect to the diamine and the open or closed character of the pendent ethylene oxide sequence, also affected other general properties such as the mechanical resistance, mechanical modulus, or water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4063–4075, 2006     

Synthesis and characterization of new polyamideimides with a highly flexible soft block

Five new polyamideimides (PAI) were synthesized from five diacid chlorides with preformed imide rings and a telechelic α,ω-diamino-polyoxyethylene (Jeffamine JFA ED600). The diacid chloride monomers could be obtained in high yields (77–92%) from chlorinating the corresponding diacids which were obtained from the reaction of trimellitic anhydride with aromatic diamines (1,4-phenylene diamine; 2,2-bis(4-aminophenyl)methane; 2,2-bis(4-aminophenyl)propane; 4,4′-oxydianiline and 1,1-bis(4-aminophenyl)cyclohexane). The telechelic monomers were characterized by FTIR and ¹H-NMR. After a few preliminary experiments aimed at optimizing the polymerization conditions for particularly poorly soluble diacid chlorides, five new PAI were synthesized with inherent viscosities in the range of 0.35–0.65 dL/g. Their characterization by transmission FTIR and by advanced NMR techniques, including heteronuclear 2D NMR, fully confirmed their chemical structure as shown by the complete assignments of their ¹H and ¹³C-NMR spectra. Compared with other PAI described in the literature, these polymers proved to be much more sensitive towards polar organic solvents even showing significant solubilities in chloroform and tetrahydrofuran. These materials enabled the casting of transparent films which were very tough in the dry state. However, and as further evidenced by a DSC investigation, their phase separation is usually not sufficient to provide a very strong physical crosslinking by the aggregation of the polymer hard blocks. Consequently, their physical crosslinking would have to be significantly improved for preventing the material failure in highly solvating media and open the way for new performances in membrane separation systems. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2873–2889, 1999