Influence of molecular architecture on fast and segmental dynamics and the glass transition in polybutadiene

Changes in the fast dynamics of polybutadiene (PB) with molecular weight and molecular architecture have been investigated by light and neutron scattering spectroscopy. Differences observed in the fast dynamics of various molecules correlate with differences seen in the value of the glass‐transition temperature (T_g). The segmental and fast dynamics as well as the value of T_g are dependent on the total molecular weight of the molecule but independent of its architecture. In other words, the dynamics of PB depend on the number of segments in the molecule but do not show a significant dependence on how the segments are connected (molecular topology), even for arm molecular weights commensurate with the entanglement molecular weight. Literature data for the T_g's of highly branched, phenolic‐terminated dendritic poly(benzyl ethers) of various core structures exhibit the same trend. There is no explanation for why the segmental motion appears to be sensitive to the total molecular weight of the molecule but is independent of its architecture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2431–2439, 2002     

Synthesis,characterization, and properties of linear poly(ether sulfone)s with dendritic terminal groups

Hybrid linear‐dendritic ABA polymers, where A and B are dendritic and linear polymers, respectively, were synthesized in a single step via step‐growth polymerization of 4,4′‐difluorodiphenylsulfone and bisphenol A using arylether ketone dendrons of first and second generations (G1‐OH and G2‐OH) as monofunctional end‐cappers. These G1 and G2‐terminated poly(ether sulfone)s (G1‐PESs and G2‐PESs) were characterized by ¹H NMR, SEC, DSC, TGA, melt rheology, and tensile tests. The comparison of the glass transition temperatures (T_gs) of these polymers with those of t‐butylphenoxy‐terminated polysulfones reveal that the G1‐ and G2‐PESs have lower T_gs at all molecular weights investigated. However, a plot of T_g versus 1/M_n shows that the difference between the three series becomes negligible at infinite molecular weight and agrees to the chain end free volume theory. The melt viscosities of G1‐PES and G2‐PES with high molecular weights do not show a Newtonian region and, in the high frequency region, their viscosities are lower than that of the control while the stress–strain properties are comparable to those of the control, suggesting that it is possible to reduce the high shear melt viscosity of a PES without affecting the stress–strain properties by introducing bulky dendritic terminal groups. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 958–969, 2008     

Equilibrium phase diagram of polystyrene and 8CB

The experimental equilibrium phase diagram of a mixture of linear polystyrene of molecular weight M_w = 44,000 g/mol and 4‐cyano‐4′‐n‐octyl‐biphenyl (8CB) is established. The three transitions smectic A‐nematic, nematic‐isotropic, and isotropic‐isotropic are observed. The first two are observed both by optical microscopy and differential scanning calorimetry (DSC) while the isotropic‐isotropic transition could be seen only via optical microscopy. Two series of samples with the same compositions were independently prepared and yielded consistent results both by microscopy and DSC. Measurements of sample compositions with less than 50 weight % of 8CB were influenced by the vicinity of the glass transition temperature (T_g) of the polymer in the mixture. This quantity is also determined by DSC as a function of composition. A single T_g is observed, which decreases with composition of the LC. Other thermodynamic quantities such as the enthalpy variations of LC in the nematic‐isotropic transition and the fraction of LC contained in the droplets are also considered. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1841–1848, 1999     

Effect of polymer architecture on self‐diffusion of LC polymers

Two LC side‐group poly(methacrylates) were synthesized, and their melt dynamics were compared with each other and a third, main‐chain side‐group combined LC polymer. A new route was developed for the synthesis of the poly(methacrylate) polymers which readily converts relatively inexpensive perdeuteromethyl methacrylate to other methacrylate monomers. Self‐diffusion data was obtained through the use of forward recoil spectrometry, while modulus and viscosity data were measured using rotational rheometers in oscillatory shear. Diffusion coefficients and complex viscosity were compared to previous experiments on liquid crystal polymers of similar architecture to determine the effect of side‐group interdigitation and chain packing on center of mass movement. The decyl terminated LC side‐group polymer possessed an interdigitated smectic phase and a sharp discontinuity in the self‐diffusion behavior at the clearing transition. In contrast, the self‐diffusion behavior of the methyl terminated LC side‐group polymer, which possessed head‐to‐head side‐group packing, was seemingly unaffected by the smectic–nematic and nematic–isotropic phase transitions. The self‐diffusion coefficients of both polymers were relatively insensitive to the apparent glass transition. The presence of moderately fast sub‐T_g chain motion was supported by rheological measurements that provided further evidence of considerable molecular motion below T_g. The complex phase behavior of the combined main‐chain side‐group polymer heavily influenced both the self‐diffusion and rheological behavior. Differences between the self‐diffusion and viscosity data of the main‐chain side‐group polymer could be interpreted in terms of the defect structure. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 405–414, 1999     

Precise synthesis of a series of poly(4‐n‐alkylstyrene)s and their glass transition temperatures

Poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl groups such as methyl, ethyl, propyl, butyl, hexyl, and octyl groups covering wide molecular weight range from around 5 k to over 100 k were precisely synthesized by living anionic polymerizations. It was confirmed that all the polymers obtained have narrow molecular weight distribution, that is, M_w/M_n is all less than 1.1, by SEC. T_gs of all the polymers were estimated by DSC measurements and it turned out to be clear that their molecular weight dependence was well described by the Fox–Flory equations. Furthermore, it is evident that T_g monotonically decreases as a number of carbon atoms of n‐alkyl group is increased, though T_g values are all 20 K or more higher than those reported previously for the same polymer series. This is because backbone mobility increases by introducing longer n‐alkyl side groups with high mobility, while T_g difference in between this work and the previous one may due to the experimental conditions and also to the molecular weight range adopted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 757–763     

Synthesis and characterization of hyperbranched polyimides with good organosolubility and thermal properties based on a new triamine and conventional dianhydrides

A triamine monomer, 1,3,5‐tris(4‐aminophenoxy)benzene (TAPOB), was synthesized from phloroglucinol and 4‐chloronitrobenzene, and it was successfully polymerized into soluble hyperbranched polyimides (HB PIs) with commercially available dianhydrides: 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA), 4,4′‐oxydiphthalic anhydride (ODPA), and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). Different monomer addition methods and different monomer molar ratios resulted in HB PIs with amino or anhydride end groups. From ¹H NMR spectra, the degrees of branching of the amino‐terminated polymers were estimated to be 0.65, 0.62, and 0.67 for 6FDA–TAPOB, ODPA–TAPOB, and BTDA–TAPOB, respectively. All polymers showed good thermal properties with 10% weight‐loss temperatures (T₁₀'s) above 505 °C and glass‐transition temperatures (T_g's) of 208–282 °C for various dianhydrides. The anhydride‐terminated HB PIs showed lower T₁₀ and T_g values than their amino‐terminated counterparts. The chemical conversion of the terminal amino or anhydride groups of the 6FDA‐based polyimides into an aromatic imido structure improved their thermal stability, decreased their T_g, and improved their solubility. The HB PIs had moderate molecular weights with broad distributions. The 6FDA‐based HB PIs exhibited good solubility even in common low‐boiling‐point solvents such as chloroform, tetrahydrofuran, and acetone. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3804–3814, 2002     

Synthesis of hydroxyl‐terminated poly(ether ether ketone) with pendent tert‐butyl groups and its use as a toughener for epoxy resins

Hydroxyl‐terminated poly(ether ether ketone) with pendent tert‐butyl groups (PEEKTOH) was synthesized by the nucleophilic substitution reaction of 4,4′‐difluorobenzophenone with tert‐butyl hydroquinone with potassium carbonate as a catalyst and N‐methyl‐2‐pyrrolidone as a solvent. Diglycidyl ether of bisphenol A epoxy resin was toughened with PEEKTOHs having different molecular weights. The melt‐mixed binary blends were homogeneous and showed a single composition‐dependent glass‐transition temperature (T_g). Kelley–Bueche and Gordon–Taylor equations gave good correlation with the experimental T_g. Scanning electron microscopy studies of the cured blends revealed a two‐phase morphology. A sea‐island morphology in which the thermoplastic was dispersed in a continuous matrix of epoxy resin was observed. Phase separation occurred by a nucleation and growth mechanism. The dynamic mechanical spectrum of the blends gave two peaks corresponding to epoxy‐rich and thermoplastic‐rich phases. The T_g of the epoxy‐rich phase was lower than that of the unmodified epoxy resin, indicating the presence of dissolved PEEKTOH in the epoxy matrix. There was an increase in the tensile strength with the addition of PEEKTOH. The fracture toughness increased by 135% with the addition of high‐molecular‐weight PEEKTOH. The improvement in the fracture toughness was dependent on the molecular weight and concentration of the oligomers present in the blend. Fracture mechanisms such as crack path deflection, ductile tearing of the thermoplastic, and local plastic deformation of the matrix occurred in the blends. The thermal stability of the blends was not affected by blending with PEEKTOH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 541–556, 2006     

The effects of monoepoxide chain termination and their derived soluble fractions on the structure‐property relationships of controlled epoxy networks

A new series of monoepoxide terminated controlled epoxy networks (CENs) and a corresponding soluble fraction polymer (SFP) were prepared to further investigate the effects of chain termination on epoxy thermoset structure‐property relationships. CENs having an initial molecular weight between crosslinks (M_c,i) of ～3000 g/mol using phenylglycidyl ether (PGE) as the chain terminator have thermal and mechanical properties consistent with previously studied monophenol terminated CENs. Glass transition temperature (T_g) decreases monotonically with PGE concentration (ε), whereas fracture toughness decreases sharply at a critical PGE concentration (ε_c). A PGE terminated SFP was prepared corresponding to the soluble fraction expected for the CEN composition at ε_c. The SFP behaves as a weak antiplasticizer in these epoxy thermosets; T_g is reduced and follows the inverse rule of mixtures, and fracture toughness is slightly reduced. By difference it is inferred that most of the deterioration of epoxy thermoset properties resulting from incorporation of chain terminators above ε_c is a result of the presence of nonelastically active pendant chains and by the increase in M_c. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 72–79, 2009     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s

Transparent poly(urethane urea) (TPUU) materials offer an avenue to enable material designs with potential to achieve simultaneous enhancements in both physical and mechanical properties. To optimize the performance required for each application, the molecular features that influence the microstructure, the glass transition temperature (T_g), the deformation mechanisms, and the mechanical deformation behavior must be understood and exploited. In this work, a comprehensive materials characterization of select model PUUs with tunable microstructures is addressed. Increasing the hard segment (HS) content increases the stiffness and flow stress levels, whereas altering the soft segment (SS) molecular weight from 2000 to 1000 g/mol leads to an enhanced phase mixing with a SS T_g shifted ～17 °K toward higher temperatures as well as broadening of the SS relaxation closer to room temperature. As a result, the 1K TPUU materials display greater rate‐dependent stiffening and strain hardening on mechanical deformation over the broad range of strain rates covered in this work (10^?3 to 10⁴ s^?1). In such case of similar urea‐based HS content, the molar content of the urethane linkages, per stoichiometric requirements, is much higher in the 1K TPUUs than the 2K TPUUs. These additional urethane moieties lead to an increase in the extent of intermolecular interactions, via hydrogen bonding between the HS and the SS, providing not only further phase mixing and stronger rate sensitivity but also provide 1K TPUUs with drastically improved barrier properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Novel aromatic polymers from benzaldehyde and triphenylamine derivatives: Synthesis,electrochromic, and photochemical properties

A series of novel triphenylamine‐based polymers were synthesized from benzaldehyde and triphenylamine derivatives. All the polymers having high molecular weight are readily soluble in many organic solvents and could be solution‐cast into amorphous films. They had glass transition temperatures (T_gs) in the range of 193–217 °C, and 10% weight loss temperatures in excess of 475 °C. Cyclic voltammograms of all polymers showed reversible oxidation redox peaks and E_onset around 0.42–0.90 V, indicating that the polymers are electrochemically active and stable. In addition, all these polymers revealed photochemical characteristics in conformity with their electrochromic characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2118–2131, 2009     

Structure‐property relationships for a series of amorphous partially aliphatic polyimides

High molecular weight, soluble, amorphous, partially aliphatic polyimides were successfully synthesized using an ester acid high‐temperature solution imidization route, which allows one to control desired glass‐transition (T_g) and processing temperatures. This method involves the prereaction of aromatic dianhydrides with ethanol and a tertiary amine catalyst to form ester acids, followed by the addition of diamines. Subsequent thermal reaction forms fully cyclized polyimides. This reaction pathway eliminates the need for anhydrous solvents and overcomes the problem of salt formation commonly observed for nucleophilic, more‐basic aliphatic amines when utilizing the traditional polyamic acid synthesis route. The molar ratio of aromatic‐to‐aliphatic diamines was varied to generate a series of copolyimides with the chosen dianhydride and tailor the physical properties for specific adhesive applications. This series of copolyimides was characterized by their molecular weight, T_g, thermal stability, coefficient of thermal expansion, refractive index, and dielectric constant. Structure‐property relationships were established. The γ and β sub‐T_g viscoelastic properties were researched to understand their molecular origins. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1503–1512, 2002     

Effects of water on epoxy cure kinetics and glass transition temperature utilizing molecular dynamics simulations

Effects of water on epoxy cure kinetics are investigated. Experimental tests show that absorbed water in an uncured bisphenol‐F/diethyl‐toluene‐diamine epoxy system causes an increase in cure rate at low degrees of cure and a decrease in cure rate at high degrees of cure. Molecular simulations of the same epoxy system indicate that the initial increase in cure rate is due to an increase in molecular self‐diffusion of the epoxy molecules in the presence of water. Effects of water on the glass transition temperature (T_g) of the crosslinked thermoset are also studied. Both experiments and simulations show that water decreases T_g. Both types of results indicate that T_g effects are small below 1% water by weight, but that T_g depression occurs much quickly with increasing water content above 1%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1150–1159     

Extension of the chain‐end,free‐volume theory for predicting glass temperature as a function of conversion in hyperbranched polymers obtained through one‐pot approaches

Compared with linear polymers, more factors may affect the glass‐transition temperature (T_g) of a hyperbranched structure, for instance, the contents of end groups, the chemical properties of end groups, branching junctions, and the compactness of a hyperbranched structure. T_g's decrease with increasing content of end‐group free volumes, whereas they increase with increasing polarity of end groups, junction density, or compactness of a hyperbranched structure. However, end‐group free volumes are often a prevailing factor according to the literature. In this work, chain‐end, free‐volume theory was extended for predicting the relations of T_g to conversion (X) and molecular weight (M) in hyperbranched polymers obtained through one‐pot approaches of either polycondensation or self‐condensing vinyl polymerization. The theoretical relations of polymerization degrees to monomer conversions in developing processes of hyperbranched structures reported in the literature were applied in the extended model, and some interesting results were obtained. T_g's of hyperbranched polymers showed a nonlinear relation to reciprocal molecular weight, which differed from the linear relation observed in linear polymers. T_g values decreased with increasing molecular weight in the low‐molecular‐weight range; however, they increased with increasing molecular weight in the high‐molecular‐weight range. T_g values decreased with increasing log M and then turned to a constant value in the high‐molecular‐weight range. The plot of T_g versus 1/M or log M for hyperbranched polymers may exhibit intersecting straight‐line behaviors. The intersection or transition does not result from entanglements that account for such intersections in linear polymers but from a nonlinear feature in hyperbranched polymers according to chain‐end, free‐volume theory. However, the conclusions obtained in this work cannot be extended to dendrimers because after the third generation, the end‐group extents of a dendrimer decrease with molecular weight. Thus, it is very possible for a dendrimer that T_g increases with 1/M before the third generation; however, it decreases with 1/M after the third generation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1235–1242, 2004     

Viscoelastic properties of bis(phenyl)fluorene‐based cardo polymers with different chemical structure

Viscoelastic properties of urethane and ester conjugation cardo polymers that contain fluorene group, 9,9‐bis(4‐(2‐hydroxyethoxy)phenyl)fluorene (BPEF), were investigated. As for the urethane‐type cardo polymers containing BPEF in the main chain, it had a high glass‐transition temperature (T_g), which was observed as the α dispersion on viscoelastic measurement, and its temperature depended on the chemical structure of the spacing unit, such as toluene diisocyanate (TDI), 4,4′‐methylene diphenyl diisocyanate (MDI), methylene dicycloexyl diisocyanate (CMDI), and hexamethylene diisocyanate (HDI). Moreover, the T_g of urethane‐type cardo copolymers with various cardo contents increased with an increase of cardo content. Owing to the increase of T_g of cardo polymers, another molecular motion can be measured at the temperature between the α and β dispersion that was assigned to the molecular motion of urethane conjugation unit around 200 K, and it was referred to as the α_sub dispersion. The peak temperature of the α_sub dispersion was influenced by the chemical structure of the spacing unit, but it did not change for the cardo polymer containing the same spacing unit. Consequently, it was deduced that the α_sub dispersion was originated in the subsegmental molecular motions of the cardo polymers. Ester‐type cardo polymer had higher T_g in comparison with noncardo polymer that consisted of dimethyl groups (BPEP) instead of BPEF as well. The α_sub dispersion was also measured at the temperature between the α and β dispersion, which was assigned to the molecular motion of ester conjugation unit, around 220 K. For ester cardo polymer, the γ dispersion was measured in a low‐temperature region around 140 K, and it was due to a small unit motion in the ester‐type cardo polymers, such as ethoxyl unit, ? C₂H₄O? . Moreover, the intensity of the γ dispersion of noncardo polymer was higher than that of cardo polymer, which means the molecular motion was much restricted by the cardo structure of BPEF. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2259–2268, 2005     

Synthesis and characterization of a series of wholly aromatic copolyesters containing 2‐(α‐phenylisopropyl)hydroquinone moiety

Two series of new wholly aromatic thermotropic copolyesters containing the 2‐(α‐phenylisopropyl)hydroquinone (PIHQ) moiety have been synthesized and their basic properties such as glass transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity were studied by differential scanning calorimetry (DSC), thermogravimetry (TG), and wide‐angle X‐ray diffractometry (WAXD) and on a polarizing microscope. The first series was prepared from acetylated PIHQ, terephthalic acid (TPA), and 2,6‐naphthalenedicarboxylic acid (NDA), and the second series from acetylated PIHQ, TPA, and 1,1′‐biphenyl‐4,4′‐dicarboxylic acid (BDA). The T_g values (152–168°C) of the two series are not much different, although the values for the first series appear slightly higher. The T_m values (287–378°C) and the degree of crystallinity of the first series are appreciably greater than those of the second series. Such differences can be explained by the geometric structure of NDA and BDA moieties. All of the present polyesters are thermotropic and nematic. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 881–889, 1999     

Synthesis and characterization of biodegradable A–B–A triblock copolymers containing poly(ϵ‐caprolactone) A blocks and poly(trans‐4‐hydroxy‐L‐proline) B blocks

Novel, biodegradable poly(?‐caprolactone)‐block‐poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline)‐block‐poly(?‐caprolactone) triblock copolymers were synthesized by ring‐opening polymerization from dihydroxyl‐terminated macroinitiator poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline) (PHpr) and ?‐caprolactone (?‐CL) with stannous octoate as the catalyst. The molecular weights were characterized with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. With an increase in the contents of ?‐CL incorporated into the copolymers, a decrease in the glass‐transition temperature (T_g) was observed. The T_g values of copoly(4‐phenyl‐?‐caprolactone) and copoly(4‐methyl‐?‐caprolactone) were higher than T_g of copoly(?‐caprolactone). Their micellar characteristics in an aqueous phase were investigated with fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The block copolymers formed micelles in the aqueous phase with critical micelle concentrations in the range of 1.00–1.36 mg L^?1. With higher molecular weights and hydrophobic components in the copolymers, a higher critical micelle concentration was observed. As the feed weight ratio of antitriptyline hydrochloride (AM) to the polymer increased, the drug loading increased. The micelles exhibited a spherical shape, and the average size was less than 250 nm. The in vitro hydrolytic degradation and controlled drug release properties of the triblock copolymers were also investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4268–4280, 2006     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001     

Effect of benzenesulfonamide plasticizers on the glass‐transition temperature of semicrystalline polydodecamide

The effect of various benzenesulfonamide (BSA) plasticizers on the amorphous phase of semicrystalline polydodecamide (PA‐12) has been investigated. MonoBSAs appear as efficient glass‐transition temperature (T_g) depressors because of their miscibility with the host polyamide (PA), low glass transition, and small molecule size. PA‐12's T_g shifts from 50 to about 0 °C at 20 mol % of the most efficient molecules. Comparatively, the more bulky bisBSAs appear to induce less important absolute T_g decreases (30 K at 20 mol %), although these appear as more important when considering the polymer T_g to plasticizer T_g difference. This unexpected observation could be ascribed to both the amide‐sulfonamide interactions and the sterically generated disorder within the polyamide because of the plasticizer molecule's size. Phase‐separation behavior of BSA plasticizers within the host PA has also been investigated. Crystalline phenyl‐SO₂NH₂, for instance, dephased beyond 20 mol % in PA‐12, forming distinct 1–2 micrometer wide crystalline domains as a result of its high propensity to crystallize upon cooling from the melt. By contrast, slow crystallizing N,N‐dimethylBSA, which lacks any specific interaction for PA‐12, remained nevertheless dispersed at a molecular level (metastable state, no phase separation) when vitrification of the host PA‐12 amorphous phase occurred on cooling. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2208–2218, 2002     

Preparation of high‐temperature polyurethane by alloying with reactive polyamide

A series of novel poly(urethane amide) films were prepared by the reaction of a polyurethane (PU) prepolymer and a soluble polyamide (PA) containing aliphatic hydroxyl groups in the backbone. The PU prepolymer was prepared by the reaction of polyester polyol and 2,4‐tolylenediisocyanate and then was end‐capped with phenol. Soluble PA was prepared by the reaction of 1‐(m‐aminophenyl)‐2‐(p‐aminophenyl)ethanol and terephthaloyl chloride. The PU prepolymer and PA were blended, and the clear, transparent solutions were cast on glass substrates; this was followed by thermal treatments at various temperatures to produce reactions between the isocyanate group of the PU prepolymer and the hydroxyl group of PA. The opaque poly(urethane amide) films showed various properties, from those of plastics to those of elastomers, depending on the ratio of the PU and PA components. Dynamic mechanical analysis showed two glass‐transition temperatures (T_g's), a lower T_g due to the PU component and a higher T_g due to the PA component, suggesting that the two polymer components were phase‐separated. The rubbery plateau region of the storage modulus for the elastic films was maintained up to about 250 °C, which is considerably higher than for conventional PUs. Tensile measurements of the elastic films of 90/10 PU/PA showed that the elongation was as high as 347%. This indicated that the alloying of PU with PA containing aliphatic hydroxyl groups in the backbone improved the high‐temperature properties of PU and, therefore, enhanced the use temperature of PU. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3497–3503, 2002