Synthesis of photoreactive calixarene derivatives containing pendant cyclic ether groups

New photoreactive calixarene derivatives containing cationically polymerizable pendant oxetane groups (calixarenes 1a , b , 2a , b , and 3a , b ) were synthesized in good yields by the substitution reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with (3‐methyloxetan‐3‐yl)methyl 4‐toluenesulfonate and (3‐ethyloxetan‐3‐yl)methyl 4‐toluenesulfonate with potassium hydroxide as a base and tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrrolidone, respectively. Calixarene derivatives containing cationically polymerizable pendant oxirane groups (calixarenes 4 , 5 , and 6 ) were also prepared in good yields by the substitution reaction of CRA, MCA, and BCA with epibromohydrin, respectively, with cesium carbonate as a base in N‐methyl‐2‐pyrrolidone. The thermal stability of the obtained calixarene derivatives containing pendant oxetane groups or oxirane groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had thermal stability beyond 340 °C. The photochemical reaction of calixarenes 1 , 2 , and 3 containing pendant oxetane groups was examined with certain photoacid generators in the film state. In this reaction system, calixarene 1a , composed of a CRA structure and pendant (3‐methyloxetan‐3‐yl)methyl groups, showed the highest photochemical reactivity when bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) was used as the catalyst. The photochemical reaction of calixarenes 4 , 5 , and 6 containing pendant oxirane groups was also examined, and it was found that the photoinitiated cationic polymerization of calixarenes 4 , 5 , and 6 proceeded smoothly under the same conditions; however, the reaction rates were lower than those of the corresponding calixarenes 1 , 2 , and 3 containing pendant oxetane groups. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1169–1179, 2001     

Synthesis and photoinduced deprotection of calixarene derivatives containing certain protective groups

Calixarene derivatives 1a , 1b , and 1c containing pendant tert‐butoxycarbonyl (t‐BOC) groups were synthesized in 81, 93, and 83% yields, respectively, by the reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with di‐tert‐butyl dicarbonate using triethylamine as a base in pyridine. Calixarene derivatives 2a , 2b , and 2c containing pendant trimethylsilyl ether (TMSE) groups were obtained in 58, 50, and 82% yields, respectively, by the reaction of CRA, MCA, and BCA with 1,1,1,3,3,3‐hexamethyldisilazane using chlorotrimethylsilane as an accelerator in tetrahydrofuran. Calixarene derivatives 3a , 3b , and 3c containing pendant cyclohexenyl ether (CHE) groups were also prepared in 65, 78, and 84% yields, respectively, by the reaction of CRA, MCA, and BCA with 3‐bromocyclohexene using potassium hydroxide as a base as well as tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrolidone. The photoinduced deprotection of calixarene derivatives 1a – c was examined with bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) as a photoacid generator on UV irradiation followed by heating in the film state, and it was found that the deprotection of the t‐BOC groups of 1a proceeded smoothly in high conversion. The deprotection rates of the t‐BOC groups of 1b and 1c were much lower than that of 1a under the same irradiation conditions. The photoinduced deprotection of calixarenes 2b – c containing tetramethylsilane groups as well as 3a – c containing CHE groups were also examined under similar reaction conditions in the film state, and it was found that the deprotection rates of calixarenes 2b – c and 3a – c were lower than those of the corresponding 1a – c calixarenes. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1481–1494, 2001     

The synthesis and cationic polymerization behavior of ambifunctional monomers

The synthesis of a novel series of ambifunctional monomers containing cationically polymerizable vinyl and 1-propenyl ether or 1-butenyl ether groups in the same molecule has been carried out. Studies of the onium salt-induced photopolymerizations of these monomers indicate that both functional groups are highly reactive and that they undergo extensive copolymerization. © 1996 John Wiley & Sons, Inc.     

Synthesis of silicon-containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Silicon-containing divinyl ether monomers were synthesized by the addition reaction of glycidyl vinyl ether ( 1 ) with various silyl dichlorides using tetra-n-butylammonium bromide (TBAB) as a catalyst. The reaction of 1 with diphenyl dichlorosilane gave bis-[1-(chloromethyl)-2-(vinyloxy)-ethyl]diphenyl silane ( 3a ) in 89% yield. Polycondensations of 3a with terephthalic acid were also carried out using 1,8-Diazabicyclo[5.4.0]-7-undecene (DBU) to afford silicon-containing polyfunctional vinyl ether oligomers ( 5 ). A multifunctional Si-monomer with both vinyl ether and methacrylate groups ( 7 ) was prepared by the reaction of 3a with potassium methacrylate using TBAB as a phase transfer catalyst. Photoinitiated cationic polymerizations of these vinyl ether compounds proceeded rapidly using the sulfonium salt, bis-[4-(diphenyl-sulfonio)phenyl]sulfide-bis-hexafluorophoshate (DPSP), as the cationic photoinitiator in neat mixtures upon UV irradiation. Multifunctional monomer 7 with both vinyl ether and methacrylate groups showed “hybrid curing properties” using both DPSP and the radical photoinitiator, 2,4,6-trimethylbenzoyl diphenylphoshine oxide (TPO). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3217–3225, 1997     

SYNTHESIS OF ALKYL AND ARYL 1-PROPENYL ETHER MONOMERS: A NEW APPROACH

A new, convenient synthesis of alkyl and aryl 1-propenyl ether monomers in good to excellent yields has been developed. Alkyl and aryl allyl ethers can be smoothly isomerized to the desired 1-propenyl ethers by refluxing in a basic ethanolic solution containing pentacarbonyliron as a catalyst. A simplified two-step, one-pot procedure has also been developed which consists of combining an alcohol with allyl bromide in the presence of base and then adding pentacarbonyliron to isomerize the in-situ generated allyl ether to directly give the 1-propenyl ether. Good yields of alkyl 1-propenyl ethers were obtained using this process. Factors affecting the isomerization reaction were investigated and a mechanism was proposed.     

Synthesis of functional polymers bearing cyclic carbonate groups from (2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether

(2-Oxo-1,3-dioxolan-4-yl) methyl vinyl ether (OVE) was synthesized with high yield by addition reaction of glycidyl vinyl ether with carbon dioxide using tetrabutylammonium bromide (TBAB) as a catalyst. OVE was also prepared by reaction with β-butyrolactone or sodium hydrogencarbonate in the presence of TBAB as the catalyst. Poly [(2-oxo-1,3-dioxolan-4-yl) methyl vinyl ether] [P(OVE)] was obtained with high yield by cationic polymerization of OVE catalyzed using boron trifluoride diethyl ether complex in dichloromethane. Polymers bearing pendant 5-membered cyclic carbonate groups were also prepared by radical copolymerization of OVE with some electron-accepting monomers. Furthermore, addition reaction of P(OVE) with alkyl amines yielded the corresponding polymer having pendant 2-hydroxyethyl carbamate residue with high conversions. © 1994 John Wiley & Sons, Inc.     

Synthesis,characterization, and polymerization of propenyl ether analogues

A series of aromatic monomers bearing cationically polymerizable propenyl groups were prepared and characterized using the readily available starting materials: isoeugenol and o-allyl phenol. Monomers with both propenyl and vinyl ether functional groups were also synthesized by the reaction of these starting materials with chloroethyl vinyl ether. The reactivity of the resulting monomers in photoinitiated cationic polymerization was studied using differential scanning photocalorimetry and photogel point measurements. Their thermal properties were determined using thermogravimetric analysis. © 1994 John Wiley & Sons, Inc.     

Dicobalt octacarbonyl-catalyzed cationic polymerization of allylic and enolic ethers

In the presence of silanes bearing Si H groups, dicobalt octacarbonyl [Co₂(CO)₈] efficiently catalyzes the cationic polymerization of a wide variety of enol ether and other related monomers including vinyl ethers, 1-propenyl ethers, 1-butenyl ethers, 2,3-dihydrofuran, 3,4-dihydro-2H-pyran, ketene acetals, and allene ethers. In addition, this catalyst system is also effective for the polymerization of complimentary allylic and propargylic ethers by a process involving tandem isomerization and cationic polymerization. This latter process occurs by a stepwise mechanism in which the allylic or propargylic ether is first isomerized, respectively, to the corresponding enol ether or allenic ether and then this latter compound is rapidly cationically polymerized in the presence of the catalyst. In accord with this mechanism, it has been shown that the structure of the polymers prepared from related enol and allyl ethers using the above catalyst system are identical. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1579–1591, 1997     

Synthesis and characterization of novel photopolymerizable multifunctional 2-propenyl ether analogues

Monomers bearing two, three, four, and six cationically polymerizable aryl 2-propenyl groups were synthesized and characterized. These compounds can be readily prepared by the catalytic isomerization of the corresponding allyl compounds. Strong bases and tris(triphenylphosphine)ruthenium(II) dichloride were used as the catalysts for these isomerizations. A study of the cationic photopolymerizations of these novel monomers was carried out using a diaryliodonium salt photoinitiator. The polymerization involves a stepwise condensation of the monomers followed by an intramolecular ring closure to form polyindanes. The resulting photopolymerized polymers underwent thermal oxidative decomposition at temperatures over 430°C. © 1993 John Wiley & Sons, Inc.     

Transition metal-catalyzed isomerization and polymerization of allylic and enolic ethers

Alkyl allyl ethers undergo facile thermally induced isomerization to alkyl 1-propenyl ethers in the presence of Group VIII transition metal carbonyl compounds as catalysts. The addition of a silane containing a Si H bond to these systems results in a catalyst system that is capable of not only isomerizing the allyl ether to the 1-propenyl ether, but further results in the polymerization of these later compounds. High molecular weight polymers can be obtained directly from the alkyl allyl ether in a single step. The scope and limitations of these polymerizations are described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2521–2532, 1997     

Synthesis and photopolymerization of 1-propenyl glycidyl ether

The ambifunctional monomer, 1-propenyl glycidyl ether, was prepared from allyl glycidyl ether, by a ruthenium-catalyzed isomerization reaction in high yield. 1-Propenyl glycidyl ether undergoes facile photoinduced cationic polymerization to yield a crosslinked polymer. The structure of this polymer was studied using ¹H- and, ¹³C-NMR spectroscopies and employing well-characterized related polymers as models. The model polymers were prepared by the cationic polymerization of allyl glycidyl ether with BF₃OEt₂ followed by isomerization of the pendant allyl groups by a ruthenium catalyst. Subsequently, the resulting polyether-bearing pendant 1-propenyl ether groups was subjected to a diaryliodonium salt-photoinitiated polymerization. A comparison of the spectra of the polymers indicated the presence of cyclic acetal units in the polymer backbone. © 1994 John Wiley & Sons, Inc.     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Synthesis and cationic photopolymerization of 1-butenyl ether monomers

A new series of cationically polymerizable mono-, di- and multifunctional 1-butenyl ether monomers have been prepared in high yields by the ruthenium catalyzed isomerization of the corresponding crotyl (2-butenyl) ethers. Their straightforward synthesis and high reactivity in photoinitiated cationic polymerization make these monomers highly attractive for a variety of applications. Cationic polymerization rate studies showed that these monomers exhibited comparable reactivity to their related vinyl and 1-propenyl ether analogues. © 1995 John Wiley & Sons, Inc.     

Synthesis and cationic photopolymerization of electroactive monomers containing functional groups

The synthesis and cationic photopolymerization of different cationically polymerizable monomers containing electroactive groups are reviewed with 98 references. The preparation of various compounds containing electron‐donor or electron‐acceptor moieties and photopolymerizable functional groups is described. After a short discussion of basic principles of cationic polymerization, photoinduced cationic polymerizations of various cationically polymerizable monomers containing both electron‐donor or electron‐acceptor chromophores and the functional groups such as epoxy, vinyl, thiiranyl, oxetanyl and others are reviewed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of end‐functionalized polymers and copolymers of cyclopentadiene with vinyl ethers by cationic polymerization

A series of cyclopentadiene (CPD)‐based polymers and copolymers were synthesized by a controlled cationic polymerization of CPD. End‐functionalized poly(CPD) was synthesized with the HCl adducts [initiator = CH₃CH(OCH₂CH₂X)Cl; X = Cl ( 2a ), acetate ( 2b ), or methacrylate] of vinyl ethers carrying pendant functional substituents X in conjunction with SnCl₄ (Lewis acid as a catalyst) and n‐Bu₄NCl (as an additive) in dichloromethane at −78 °C. The system led to the controlled cationic polymerizations of CPD to give controlled α‐end‐functionalized poly(CPD)s with almost quantitative attachment of the functional groups (F_n ∼ 1). With the 2a or 2b /SnCl₄/n‐Bu₄NCl initiating systems, diblock copolymers of 2‐chloroethyl vinyl ether (CEVE) and 2‐acetoxyethyl vinyl ether with CPD were also synthesized by the sequential polymerization of CPD and these vinyl ethers. An ABA‐type triblock copolymer of CPD (A) and CEVE (B) was also prepared with a bifunctional initiator. The copolymerization of CPD and CEVE with 2a /SnCl₄/n‐Bu₄NCl afforded random copolymers with controlled molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.3–1.4). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 398–407, 2001     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Effects of the polymer-support on the synthesis of 2,4-dibromophenyl allyl ether in a triphase catalysis

The synthesis of 2,4-dibromophenyl allyl ether by reacting allyl bromide with 2,4-dibromophenol in an organic solvent/alkali solution by triphase catalysis was studied. A macroporous polymer pellet which served as the support of the catalyst was prepared by reacting styrene monomer with chloromethyl styrene and divinylbenzene through suspension polymerization. Tri-n-butylamine was immobilized on the surface of the polymer pellet to form the triphase catalysts. Immobilization of the catalyst on the polymer support carried out in a mechanical agitator was suggested to obtain a high catalyst reactivity. In the three-phase reaction, the effects of agitation speed, and the characteristics of the catalyst pellet which affect the conversion of allyl bromide in the three-phase catalytic reaction were examined in detail. Based on the experimental data, the optimum operating parameters for preparing the triphase catalyst to get a high yield of 2,4-dibromophenyl allyl ether were: using a low degree of polymer crosslinking (2%), and small particle size. The yield of the product obtained from the present study is higher than that which was obtained in a two-phase reaction. © 1993 John Wiley & Sons, Inc.     

Photochemical addition reaction of a polymer-bearing pendant vinyl ether with various thiol compounds

Photochemical addition reaction of the pendant vinyl ether group in the polymer ( P-1 ), which was synthesized by the alternate ring-opening copolymerization of glycidyl vinyl ether with phthalic anhydride, with various thiol compounds such as benzenethiol, phenylmethanethiol, 2-mercaptoacetic acid, ethyl 2-mercaptoacetate, N-acetyl-L -cysteine (AcCys), and 1,4-phenylenedi(methylthiol) was carried out using benzophenone (BP) as the photosensitizer in the THF solution. Each reaction proceeded very smoothly to give the corresponding polymers with high conversion, although the degree of reaction of the pendant vinyl ether group in P-1 was affected by the molar ratio between the thiol compounds and the vinyl ether group, and the amounts of photosensitizer BP added. Furthermore, it was also found that optically active polymer containing pendant N-acetyl-L -cysteine residue was synthesized by the photochemical addition reaction of P-1 with AcCys. The reactions of P-1 with dithiol or bisazide compounds occurred effectively to give gel products in the film state, and it was found that the polymer film containing P-1 and those compounds can be applied as negative-type photoresists with high practical photosensitivity. © 1993 John Wiley & Sons, Inc.     

Substitution and elimination reactions of poly(epichlorohydrin) and poly(2-chloroethyl vinyl ether) using phase transfer catalysis

The reactions of poly(epichlorohydrin) (PECH) and poly(2-chloroethyl vinyl ether) (PCEVE) with various reagents were investigated using phase transfer catalyst (PTC) such as tetra-n-butylammonium bromide (TBAB), 18-crown-6 (CR6), and dicyclohexyl-18-crown-6 (DCHC) is a solid—liquid two-phase system. Although the reactions of these polymers hardly occurred without PTC in nonpolar solvents such as toluene and diglyme under mild conditions, the addition of PTC caused the reactions to proceed smoothly under the same conditions. In addition, the reactions of PECH and PCEVE with a strong base such as potassium hydroxide proceeded selectively through β-elimination reaction to produce the polymers with pendant vinyl groups. These results suggested this method is useful for the syntheses of functional polymers. On the other hand, it turned out that quaternary ammonium salts such as TBAB have higher catalytic activity than crown ethers such as CRG and DCHE in these reactions. Furthermore, the catalytic activity of quaternary ammonium salts was strongly influenced by their chain length and the structure of the polymers.