Synthesis and characterization of new carbazole/fluorene‐based derivatives for blue‐light‐emitting devices

2,7‐Bis(9‐ethylcarbazol‐3‐yl)‐9,9‐di(2‐ethylhexyl)fluorene and a segmented copolymer composed of the same chromophores alternated with hexamethylene fragments were synthesized. The obtained materials possess good solubility in common organic solvents, high thermal stability with 1% weight loss temperature of 350–370 °C, and suitable glass transition temperatures. Both derivatives show blue fluorescence in dilute solutions as well as in solid state, demonstrating that excimers are not formed in the thin films. The fluorescence spectra of the materials do not show any peaks in the long‐wavelength region even after annealing at 200 °C in air. An organic LED with the configuration of ITO/copolymer/Al generates blue electroluminescence with the maximum peak at 416 nm, rather low turn‐on voltage (4.0 V), and brightness of about 400 cd/m². The heterostructure device based on model derivative emitted stable blue light with low operation voltage (100 cd/m² at ～11 V) and demonstrated luminescence efficiency of 0.8 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5987–5994, 2006     

Photophysical characteristics of soluble oligo(p‐phenylenevinylene)–fullerene dyad

The fact that C₆₀ is a good acceptor has stimulated interest in covalently linked complexes, including polymers and oligomers. Photoinduced charge transfer in these systems has great potential for use in photovoltaic devices. In this study, an alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene, with pendant C₆₀ moieties, (PPV‐AFCAR) was prepared and characterized. The excited‐state properties of PPV–AFCAR were investigated with steady‐state spectroscopy and lifetime measurements. After photoexcitation, photoinduced energy transfer from the oligomer chain to the pendant moiety occurred in great proportion, but a charge‐separation process did not. Whether the energy‐transfer process was measurable or not depended on the system temperature. At 77 K, a quantum yield of more than 50% for energy transfer was found by the fitting of a linear combination of the excitation spectra of the precursor oligomer, the alternating conjugated oligomer of alkylated carbazole and dialkoxyl‐substituted phenylene PPV–ACAR, and the absorption spectra of C₆₀. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3981–3988, 2001     

Poly(alkylthio‐p‐phenylenevinylene): Synthesis and electroluminescent and photovoltaic properties

Two alkylthio‐substituted poly(p‐phenylenevinylene) (AT–PPV) derivatives, poly(2‐octylthio‐p‐phenylenevinylene) (OT–PPV) and poly[5‐methoxy‐2‐(2′‐ethyl‐hexylthio)‐p‐phenylenevinylene] (MEHT–PPV), were synthesized by a Heck coupling reaction for the investigation of the effect of alkylthio groups on the optoelectronic properties of poly(p‐phenylenevinylene) derivatives. The absorption peaks of OT–PPV and MEHT–PPV solutions were located at 431 and 438 nm, respectively. As for solid films, an OT–PPV film showed an absorption maximum wavelength at 444 nm, 13 nm redshifted in comparison with its solution value, whereas an MEHT–PPV film displayed the same absorption peak position as its dilute solution; this indicated that there was no interchain interaction in the MEHT–PPV film. Polymeric light‐emitting diodes (PLEDs) and polymer solar cells (PSCs) based on OT–PPV and MEHT–PPV were fabricated and characterized. Very narrow bandwidths of the electroluminescence (EL) spectra of the two AT–PPVs were found, with the full width at half‐maximum of the emission being 40 and 47 nm for OT–PPV and MEHT–PPV, respectively. The maximum EL efficiency of the single‐layer PLED based on MEHT–PPV with Al as a cathode reached 1.49 cd/A. The PSC based on a blend of OT–PPV and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) showed the power conversion efficiency of 1.4% under the illumination of AM1.5 (80 mW/cm²). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1279–1290, 2006     

Intramolecular energy transferable (2,2‐diphenylvinyl)phenyl substituted poly(p‐phenylenevinylene) derivative with efficient photoluminescence and electroluminescence

A poly(p‐phenylenevinylene) (PPV) derivative containing a bulky (2,2‐diphenylvinyl)phenyl group in the side chain, EHDVP‐PPV, was synthesized by Gilch route. The reduced tolane‐bisbenzyl (TBB) defects, as well as the structure of the polymer, was confirmed by various spectroscopic methods. The intramolecular energy transfer from the (2,2‐diphenylvinyl)phenyl side group to the PPV backbone was studied by UV‐vis and photoluminescence (PL) of the obtained polymer and model compound. The polymer film showed maximum absorption and emission peaks at 454 and 546 nm, respectively, and high PL efficiency of 57%. A yellow electroluminescence (λ_max = 548 nm) was obtained with intensities of 6479 cd/m² when the light‐emitting diodes of ITO/PEDOT/EHDVP‐PPV/LiF/Al were fabricated. The maximum power efficiency of the devices was 0.729 lm/W with a turn‐on voltage of 3.6 V. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5636–5646, 2004     

Bipolar poly(p‐phenylene vinylene)s bearing electron‐donating triphenylamine or carbazole and electron‐accepting quinoxaline moieties

Two new poly(phenylene vinylene)s (PPVs) carrying electron‐donating triphenylamine or carbazole and electron‐deficient quinoxaline units were synthesized and characterized. Their properties were compared with those of PPV containing only quinoxaline unit. The two polymers showed PL maximum at 501–510 in solution and 533–540 in thin film. Because of the presence of electron donor and acceptor units they displayed strong intramolecular charge transfer (ICT) effects; hence, low‐photoluminescence quantum yields. The polymers showed reversible electrochemical reduction with electron affinity of 2.75 eV and irreversible oxidation with ionization potential of 5.10–5.24 eV. Single‐layer LED of configuration ITO/PEDOT/polymer/Al showed low turn‐on voltage at 5 V, but limited brightness of 50–60 cdm^?2. The electroluminescence maximum was voltage‐tunable varying from 500 to 542 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2367–2378, 2008     

Synthesis and fluorescent properties of conjugated copolymers containing maleimide and fluorene units at the main chain

Yamamoto or Suzuki–Miyaura coupling polymerizations of 2,3‐diiodo‐N‐cyclohexylmaleimide with fluorene derivatives (2,7‐dibromo‐9,9′‐dihexylfluorene and 9,9′‐dihexylfluorene‐2,7‐diboronic acid) were carried out. The number‐average molecular weights (M_n) of the resulting copolymers were 2600–3500 by gel permeation chromatography analysis. The fluorescence emission of the alternating copolymer showed the emission maxima at 551 nm in THF. On the other hand, the random copolymers showed the bimodal emission peaks at 418–420 and 555–557 nm region, respectively. The fluorescence peaks of the random copolymers on the long wavelength region (555–557 nm) were attributed to the conjugated neighboring N‐cyclohexylmaleimide‐9,9′‐dihexylfluorene units in the polymer main chain. Furthermore, the copolymers exhibited the fluorescence solvatochromism by the difference of the polarity of solvents. The alternating and random copolymers showed the different fluorescence solvatochromism, and the emission colors are distinguishable by the naked eye, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4945–4956     

Conjugated and partially conjugated 2,5‐diphenylthiophene‐containing light‐emitting copolymers in polymeric light‐emitting diode (PLED) device fabrications

To study the effect of nonconjugation on polymeric and photophysical properties of thiophene‐containing polymers, new light‐emitting copolymers comprising either alternate 2,5‐diphenylthiophene and vinylene or alternate 2,5‐diphenylthiophene and aliphatic ether segments were synthesized. Both copolymers contained 2,5‐diphenylthiophene as the major chromophore and emitted a sky bluish fluorescence in dilute solution (10^?2 mg/mL). With a rigid and planarity structure and the concomitant crystallinity, the former copolymer (fully conjugated) possessed a higher quantum efficiency, a higher glass‐transition temperature, and a better thermal stability. In contrast, the latter copolymer (conjugated–nonconjugated) had better solubility and provided enhanced photophysical properties for the fabricated polymeric light‐emitting diode (PLED) device: at 15 V, the maximum current and brightness were 110 mA/cm² and 4289 cd/m², respectively, and the electroluminescence efficiency remained constant at approximately 4.9 cd/A in a voltage range of 8 to 14 V. The existence of intramolecular/intermolecular aggregates in the latter copolymer was corroborated from the the UV–vis and photoluminescence spectra of its solutions. With an increase in solution concentration, the shape and λ_max of the photoluminescence spectrum were redshifted. In a solution with a concentration as high as 10 mg/mL, the redshift was so drastic that the photoluminescence spectrum was nearly identical to that of a solid‐film. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6061–6070, 2004     

New poly(p‐phenylene vinylene) derivatives with two oxadiazole rings per repeat unit: Synthesis,photophysical properties,electroluminescence, and metal ion recognition

Two new poly(p‐phenylene vinylene) derivatives OX1‐PPV and OX2‐PPV bearing two 1,3,4‐oxadiazole rings per repeat unit and a fully conjugated backbone with solubilizing dodecyloxy side groups were synthesized and investigated. The amorphous conjugated polymers had glass‐transition temperature values of 60–75 °C and emitted intense blue or greenish‐blue light in solution with photoluminescence (PL) emission maxima at 379–492 nm and PL quantum yields of 0.41–0.52. In the solid state they emitted yellowish‐green light with PL emission maxima at 533–555 nm. Cyclic voltammetry showed that both conjugated polymers had reversible reduction and irreversible oxidation, making them n‐type materials. The electron affinity of OX2‐PPV was estimated as 2.85 eV whereas that of OX1‐PPV was 2.75 eV. Yellow electroluminescence (EL) was achieved from single‐layer light‐emitting diodes of OX2‐PPV with an EL emission maximum at 555 nm and a brightness of 70 cd/m². Polymer OX2‐PPV, which was functionalized with 2,6‐bis(1,3,4‐oxadiazole‐2‐yl)pyridine, demonstrated sensitivity to various metal ions as a fluorescence‐mode chemosensor. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2112–2123, 2004     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

一种含三苯胺链段的PPV类交替共聚物的合成、表征及性能

合成了三苯胺二醛和1-甲氧基-4-辛氧基-2,5-二甲苯双(三苯基氯化)两种单体,通过Wittig反应制得了共轭聚合物,对共轭聚合物进行了表征和性能测试.这类共轭聚合物的氯仿溶液和膜在紫外光激发下能发出强的蓝绿光,与小分子三苯胺衍生物(TPD)相比,具有相对较高的热稳定性和良好的成膜性.电化学分析表明聚合物具有很好的空穴传输能力.同时对共轭聚合物的光致发光和电致发光性能进行了研究,结果表明,此聚合物与同类聚对亚苯基亚乙烯基(PPV)型聚合物相比具有较低的驱动电压和较高的发光亮度,是一种潜在的有机高分子电致发光材料.     

Enhancing the electroluminescent efficiency of poly{5‐methoxy‐2‐[(2′‐ethyl‐hexyl)‐oxy]‐p‐phenylenevinylene}/poly(2,3‐diphenyl‐5‐octyl‐p‐phenylenevinylene) polyblends by the introduction of chemical bonding through a thermal treatment

A significant improvement in the electroluminescence (EL) properties was observed for a poly{5‐methoxy‐2‐[(2′‐ethyl‐hexyl)‐oxy]‐p‐phenylenevinylene} (MEH–PPV)/poly(2,3‐diphenyl‐5‐octyl‐p‐phenylenevinylene) (DPO–PPV) blend after a thermal treatment at 200 °C for 2 h in vacuo to furnish the chemical bonding between polymer chains. ¹H NMR spectroscopy and two‐photon excitation microscopy revealed that the chemical bonding turned the immiscible polyblend into a system more like a block copolymer with a vertically segregated morphology. Because both the lowest unoccupied molecular orbital and highest occupied molecular orbital levels of MEH–PPV in the wetting layer were higher than those of DPO–PPV in the upper layer, the heterojunction between the two layers of the polymers fit the category of so‐called type II heterojunctions. As a result, the turn‐on voltage of the polymer light‐emitting diode prepared with the thermally treated polyblend decreased to ～0.6 V, and the EL emission intensities and quantum efficiencies increased to about 4 times those of the untreated polyblend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 62–69, 2006     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Nearly monochromatic red electroluminescence from a nonconjugated polymer containing carbazole segments and phenanthroline [Eu(β‐diketonate)3] moieties

A novel nonconjugated copolymer (PVKEu) with carbazole segments and phenanthroline [Eu(β‐diketonate)₃] moieties was synthesized via free radical copolymerization, and characterized by FTIR, ¹H NMR spectroscopy, GPC, ICP, and elemental analysis. The copolymer exhibited good solubility, as well as good thermal stability and high glass transition temperature. The photoluminescence (PL) of this polymer in solution and in solid film has been studied. A multi‐layer device with the configuration of ITO/PEDOT: PSS (40 nm)/PVKEu (70 nm)/BCP (15 nm)/AlQ₃ (30 nm)/LiF/Al exhibited nearly monochromatic red emission at 615 nm and voltage‐independent spectral stability. Our results suggest that enhancing the ligand‐mediated energy transfer between the matrix polymer and europium complex is a potential method to improve the electroluminescence performance of the Eu‐chelated polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 210–221, 2009     

Anionic copolymerization of [60]fullerene with styrene initiated by sodium naphthalene

The novel C₆₀–styrene copolymers with different C₆₀ contents were prepared in sodium naphthalene-initiated anionic polymerization reactions. Like the pure polystyrene, these copolymers exhibited the high solvency in many common organic solvents, even for the copolymer with high C₆₀ content. In the polymerization process of C₆₀ with styrene an important side reaction, i.e., reaction of C₆₀ with sodium naphthalene, would occur simultaneously, whereas crosslinking reaction may be negligible. ¹³C-NMR results provided an evidence that C₆₀ was incorporated covalently into the polystyrene backbone. In contrast to pure polystyrene, the TGA spectrum of copolymer containing ∼ 13% of C₆₀ shows two plateaus. The polystyrene chain segment in copolymer decomposed first at 300–400°C. Then the fullerene units reptured from the corresponding polystyrene fragments attached directly to the C₆₀ cores at 500–638°C. XRD evidence indicates that the degree of order of polymers increases with the fullerene content increased in terms of crystallography. Incorporation of C₆₀ into polystyrene results in the formation of new crystal gratings or crystallization phases. In addition, it was also found that [60]fullerene and its polyanion salts [C₆₀ⁿ⁻(M⁺)_n, M = Li, Na] cannot be used to initiate the anionic polymerization of some monomers such as acrylonitrile and styrene, etc.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2653–2663, 1998     

含二唑的聚(间亚苯乙烯)电致发光二极管

含二唑的聚（间亚苯乙烯）电致发光二极管印寿根李晨曦黄文强何炳林（南开大学吸附分离功能高分子材料国家重点实验室高分子化学研究所天津３０００７１）彭俊彪刘星元李文连（中国科学院长春物理研究所长春１３００２１）关键词电致发光，光电子能谱，聚（间亚苯...     

Synthesis and electrochemical and electroluminescent properties of N‐phenylcarbazole‐substituted poly(p‐phenylenevinylene)

An N‐phenylcarbazole‐containing poly(p‐phenylenevinylene) (PPV), poly[(2‐(4′‐carbazol‐9‐yl‐phenyl)‐5‐octyloxy‐1,4‐phenylenevinylene)‐alt‐(2‐(2′‐ethylhexyloxy)‐5‐methoxy‐1,4‐phenylenevinylene)] (Cz‐PPV), was synthesized, and its optical, electrochemical, and electroluminescent properties were studied. The molecular structures of the key intermediates, the carbazole‐containing boronic ester and the dialdehyde monomer, were crystallographically characterized. The polymer was soluble in common organic solvents and exhibited good thermal stability with a 5% weight loss at temperatures above 420 °C in nitrogen. A cyclic voltammogram showed the oxidation peak potentials of both the pendant carbazole group and the PPV main chain, indicating that the hole‐injection ability of the polymer would be improved by the introduction of the carbazole‐functional group. A single‐layer light‐emitting diode (LED) with a simple configuration of indium tin oxide (ITO)/Cz‐PPV (80 nm)/Ca/Al exhibited a bright yellow emission with a brightness of 1560 cd/m² at a bias of 11 V and a current density of 565 mA/cm². A double‐layer LED device with the configuration of ITO/poly(3,4‐ethylenedioxy‐2,5‐thiophene):poly (styrenesulfonic acid) (60 nm)/Cz‐PPV (80 nm)/Ca/Al gave a low turn‐on voltage at 3 V and a maximum brightness of 6600 cd/m² at a bias of 8 V. The maximum electroluminescent efficiency corresponding to the double‐layer device was 1.15 cd/A, 0.42 lm/W, and 0.5%. The desired electroluminescence results demonstrated that the incorporation of hole‐transporting functional groups into the PPVs was effective for enhancing the electroluminescent performance. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5765–5773, 2005     

Monochromatic‐red‐light emission of novel copolymers containing carbazole units and europium–acrylate complexes

Nearly monochromatic‐red‐light‐emitting polymers with pendant carbazole and europium (Eu) complex were synthesized and characterized by Fourier transform infrared, elemental analysis (EA), ¹H NMR, ¹³C NMR, UV, and gel permeation chromatography. The photoluminescence and electroluminescence (EL) properties of these polymers were investigated. A single‐layer light‐emitting‐diode device of the structure (indium tin oxide/polymer P4/Al) was fabricated, showing the characteristic bright‐red EL of the Eu³⁺ complex at 614 nm at a turn‐on voltage of about 17 V. The EL spectrum, current–voltage, and emission‐intensity–voltage characteristics of the device were measured. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3405–3411, 2000     

D–π–A polysulfones for blue electroluminescence

Donor–π–acceptor type fluorene‐based copolymers with a sulfone unit were designed and synthesized for application in efficient pure‐blue light emitting. The electroluminescence behaviors of these copolymers were investigated by fabricating light‐emitting diodes and electrochemical cell devices. The former device little functioned but the latter worked well. The electrochemical cell devices having a configuration of ITO/PEDOT:PSS/copolymer:ionic liquid/Al exhibited purplish blue electroluminescence with an emission maximum at 434 nm (CIE coordinates (x, y) = (0.17, 0.10)) measured at 7 V. The initial positive scan of the D–π–A polysulfone based light emitting electrochemical cell with a sweep rate of 0.1 V s^?1 afforded a maximum luminance of 1080 cd m^?2 with a current efficiency of 1.96 cd A^?1 at an operating voltage of 12.5 V. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3454–3461     

Characterization of the ground state pyrene complex in ethylene-propylene copolymer solutions

Pyrene-labeled functionalized ethylene-propylene (EP) copolymer was prepared by grafting 1-pyrenebutyrylhydrazine onto EP copolymer through maleic anhydride pendants. The EP copolymer contained 60 mol % ethylene; its weight-average molecular weight (M^w) was 148,000. The pyrene-labeled amide functionalized EP copolymer, PA-EP(60/40), was made to simulate the amine functionalized EP copolymers that are commonly used as dispersant additives in motor oils. UV absorption spectra, fluorescence emission and excitation spectra, and fluorescence decay profiles of the pyrene were studied to determine the copolymer conformation and dynamics in methylcyclohexane and tetrahydrofuran (THF). The pyrene fluorescence characteristics of PA-EP(60/40) were highly dependent on the solvent. The dependence of fluorescence emission intensity on the excitation wavelength was large in methylcyclohexane and moderate in THF. A frequency shift of about 2 nm was observed between the excitation spectrum obtained with the emission line at 377 nm and that at 550 nm in the methylcyclohexane solutions, but no shift was found in the corresponding tetrahydrofuran solutions. The ratios of the preexponential factors (a₂₁/a₂₂) of the excimer decays obtained in both methylcyclohexane and THF solutions were different from ?1.0. However, the deviation of the excimer formation process from the Birks scheme is small in THF but large in methylcyclohexane. In addition, the Huggins constants obtained from intrinsic viscosity measurements of the PA-EP(60/40) copolymer solutions suggest that copolymer aggregation occurs in methylcyclohexane but not in THF. H-bonding between two pyrene-containing pendants is apparently the main driving force for the formation of the ground state pyrene complex. THF is found to be effective in inhibiting the H-bonding formation. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of polyethylene with side‐chain triphenylamines as hole‐transporting materials

The copolymerization of ethylene with triphenylamine (TPA)‐containing α‐olefin monomer 1 using a rac‐Et(Ind)₂ZrCl₂ ( EBIZr )/MAO catalytic system was investigated to prepare polyethylene with pendent TPA groups. Despite the presence of a large excess of TPA moieties, the polymerization reactions efficiently produce copolymers of high‐molecular‐weight with the comonomer incorporation up to 6.1 mol % upon varying the comonomer concentration in the feed. Inspection of the aliphatic region of the ¹³C‐NMR spectrum and the estimated copolymerization parameters (r ₁ ≈ 0 for 1 and r_E ≈ 43 for ethylene) reveal the presence of isolated comonomer units in the polymer chain. While UV–vis absorption measurements of the copolymers show an invariant absorption feature, PL spectra exhibit a slightly red‐shifted emission with increasing content of 1 in the polymer chain. All the copolymers show high thermal stability (T_d5 > 436 °C), and the electrochemical stability toward oxidation is also observed. Particularly, the copolymer displays hole‐transporting ability for the stable green emission of Alq₃ when incorporated into the hole‐transporting layer of an electroluminescence device. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5816–5825, 2008