Molecular dimensions and melt rheology of an all‐aromatic liquid crystalline polymer

The molecular dimensions and melt rheology of a thermotropic all‐aromatic liquid crystalline polyester (TLCP) composed of p‐hydroxy benzoic acid, hydroquinone, terephthalic acid, and 2,4‐naphthalenedicarboxylic acid is examined. The Mark–Houwink exponent (α) of 0.95 is estimated for the TLCP. The persistence length estimated from molecular weight (M) and intrinsic viscosity ([η]) data using the Bohdanecky–Bushin equation is about 95 Å, whereas that estimated from light scattering data is 117 Å. These persistence lengths and the observed α value, both higher than those for flexible polymers, suggest that the present TLCP is a semirigid polymer. The zero shear melt viscosity (η₀) varies with approximately M⁶ for molecular weight M > 3 × 10⁴ g/mol; below this molecular weight, η₀ varies almost linearly with M. Widely different entanglement molecular weights (M_e) are predicted, depending on the method used; the plateau modulus estimates M_e of about 8 × 10⁵ g/mol, whereas the ratio of mean square end‐to‐end distance and molecular weight (〈R²〉₀/M) predicts M_e's either too small (0.33 g/mol) or too large (2.5 × 10⁶ g/mol), depending on the theory used. Although the change in the molecular weight dependency of melt viscosity appears to be associated with the onset of entanglement coupling of the semirigid molecules, its origin needs further investigation. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2378–2389, 2001     

Predicting chain dimensions from an artificial neural network model

Artificial neural network models are used to investigate polymer chain dimensions. In our model, the input nodes are glass transition temperature (T_g), entanglement molecular weight (M_e), and melt density (ρ). The number of nodes in the hidden layer is eight. We found that the relative error for prediction of the characteristic ratio ranges from 0.77 to 7.5% and that the overall average error is 3.57%. Artificial neural network models may provide a new method for studying statistics properties of polymer chains. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3163–3167, 2000     

Synthesis of well‐defined aromatic polyesters by chain‐growth polycondensation under suppression of transesterification

For the synthesis of aromatic polyesters with defined molecular weights and narrow molecular weight distributions (MWDs), we investigated the chain‐growth polycondensation of active amide derivatives of 4‐hydroxybenzoic acid, 1a and 1b , having an octyl or 4,7‐dioxaoctyl side chain, respectively. To suppress the transesterification of the polymer backbone with the monomer, the polymerization of 1 was carried out in tetrahydrofuran (THF) at −30 °C in the presence of initiator 2 and Et₃SiH/CsF/18‐crown‐6, which generated a hydride ion as a base in situ. The number‐average molecular weight (M_n) of poly 1a was controlled, and narrow MWDs were maintained, until the [ 1a ]₀/[ 2 ]₀ feed ratio was 14.3 (M_n ≤ 3500), whereas that of poly 1b was controlled until the feed ratio was 30 (M_n ≤ 7250). The difference stemmed from the higher solubility of poly 1b in THF. This chain‐growth polycondensation was applied to the synthesis of a diblock copolyester of 1a and 1b of a defined architecture. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4109–4117, 2005     

Synthesis and characterization of new AB-type poly(etherimide)s containing bisphenol moieties

A series of new AB-type poly(etherimide)s having bisphenol-type moiety was prepared by the one-pot polyimidization using triphenylphosphite(TPP) in N-methyl-2-pyrrolidone(NMP)/pyridine solution at 150°C. Complete cyclodehydration was observed in the polymerizations as well as in model reactions. Polymers were obtained with inherent viscosities in the 0.27–0.49 dL/g range. The M_n and M_w/M_n of poly[4-(1,4-phenyleneoxy-1,4-phenylenehexafluoro-isopropylidene-1,4-phenylene)oxyphthalimide] (4d) with η_inh = 0.49 dL/g were 73,400 g/mol and 1.5, respectively. Most polymers could readily be dissolved in common organic solvents such as DMAc, NMP, and m-cresol. The polymer 4d was soluble even in chloroform. These polymers had glass transition temperatures between 205 and 235°C, and 5% weight loss temperatures in the range of 511–532°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3530–3536, 1999     

Grafting by in situ coupling of epoxy groups of a living copolymer with an anionic living polymer

A tetrahydrofuran (THF) solution of the living random copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) was prepared by the living anionic copolymerization of the two monomers, using 1,1‐diphenylhexyllithium (DPHLi) as initiator, in the presence of LiCl ([LiCl]/[DPHLi]₀ = 3), at −50°C. The copolymer thus obtained has a controlled composition and molecular weight and a narrow molecular weight distribution. By introduction of an anionic living polystyrene (poly(St)) or anionic living polyisoprene (poly(Is)) solution into the above system at −30°C, a coupling reaction took place and a graft copolymer with a polar backbone and nonpolar side chains was produced. The solvent used in the preparation of the living poly(St) or poly(Is) affects the coupling reaction. When benzene was the solvent, a graft copolymer of high purity, controlled graft number and molecular weight, and narrow molecular weight distribution (M_w/M_n = 1.11–1.21) was obtained. In the coupling reaction, the living poly(St) reacted only with the epoxy groups and not with the carbonyls of the backbone polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 105–112, 1999     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Entanglement properties of cellulose and amylose in an ionic liquid

Concentrated solutions of cellulose and amylose were prepared with an ionic liquid 1‐butyl‐3‐methylimidazolium chloride (BmimCl), which was chosen as a good solvent for these polysaccharides. Dynamic viscoelasticity of the concentrated solutions was examined to obtain the molecular weight between entanglements, M_e. The value of M_e in the molten state (M_e,melt), a material constant that reflecting the entanglement properties, was determined for cellulose and amylose by extrapolating M_e to the “melt.” A marked difference in M_e,melt was found: 3.2 × 10³ for cellulose and 2.5 × 10⁴ for amylose. The value of M_e,melt for cellulose, which is composed of β‐(1,4) bonding of D ‐glucose units, is very close to those for polysaccharides with a random‐coil conformation such as agarose and gellan in BmimCl. The much larger M_e,melt for amylose can be attributed to the helical nature of the amylose chain, α‐(1,4)‐linked D ‐glucose units. The effect of concentration on the zero‐shear viscosity for the solutions of cellulose and amylose was also examined. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Thermally reversible covalently bonded linear polymers prepared from a dihalide monomer and a salt of dicyclopentadiene dicarboxylic acid

Alkali and earth‐alkali salts of dicyclopentadiene dicarboxylic acid (DCPDCA) were prepared and employed as monomers in the polyesterification with an α,ω‐dihalide monomer, such as 1,4‐dichlorobutane (DCB), 1,4‐dibromobutane (DBB), α,α′‐dichloro‐p‐xylene (DCX), and α,α′‐dibromo‐p‐xylene (DBX). Novel linear polymers that possessed repeating moieties of dicyclopentadiene ( DCPD ) in the backbone were thus prepared. The IR and NMR spectra indicated that poly(tetramethylene dicyclopentadiene dicarboxylate) (PTMDD) with a number‐average molecular weight (M_n ) of about 1× 10⁴ and poly(p‐xylene dicyclopentadiene dicarboxylate) (PXDD) with a M_n of 4–6 × 10³ were obtained with an yield of about 80% via the polyesterification of the alkali salts with DBB and DCX, respectively. The reaction was carried out in the presence of a phase transfer catalyst, such as BzMe₃NBr or poly(ethylene glycol), in DMF at 100 °C for 4 h. Oligomers with a lower M_n (1–2 × 10³) were obtained when the earth‐alkali salts were employed as salt monomers. Compared to the irreversible linear polymers, poly(p‐xylene terephthalate) (PXTP) and poly(p‐xylene maleate) (PXM), prepared through the reaction between DCX and the potassium salts of terephthalic and maleic acid, respectively, the specific viscosities (η_sp) of the new linear polymers increased abnormally with the decrease of the temperature from 200 °C to 100 °C. This occurred due to the thermally reversible dedimerization/redimerization of  DCPD moieties of the backbone of the polymers via the catalyst‐free Diels–Alder/retro Diels–Alder cycloadditive reactions. The ratio of the η_sp at 100 °C and 200 °C of the reversible polymers was found to be much higher than that of PXTP and PXM, even when the heating/cooling cycle was carried out several times under a N₂ atmosphere. The obtained results indicated that thermally reversible covalently bonded linear polymer can be obtained by introducing the  DCPD structure into the backbone of the polymer through the polymerization of a monomer containing the  DCPD moiety. The reversible natures of the polymers and oligomers might be useful in preparing easily processable and recyclable polymers and thermosensor materials. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1662–1672, 2000     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Chain‐growth condensation polymerization approach to synthesis of well‐defined polybenzoxazole: Importance of higher reactivity of 3‐amino‐4‐hydroxybenzoic acid ester compared to 4‐amino‐3‐hydroxybenzoic acid ester

Application of chain‐growth condensation polymerization (CGCP) to obtain well‐defined polybenzoxazole (PBO) was examined. CGCP of both phenyl 3‐{(2‐methoxyethoxy)methoxy (MEM‐oxy)}‐4‐(octylamino)benzoate ( 1b ) (para‐substituted monomer) and phenyl 4‐MEM‐oxy‐3‐(octylamino)benzoate ( 3b ) (meta‐substituted monomer) was examined in the presence of metal disilazide base and phenyl 4‐nitro‐ or methylbenzoate 2 as an initiator. Polymerization of the latter monomer, but not the former, afforded polymer with controlled molecular weight based on the feed ratio of monomer to initiator and with a narrow molecular weight distribution. Accordingly, monomer 3c , in which the octyl group on the amino nitrogen of 3b was replaced with a 4‐(octyloxy)benzyl (OOB) group, was polymerized in the presence of lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS), phenyl 4‐methylbenzoate ( 2b ), and LiCl in THF at 0 °C to yield poly 3c with well‐defined molecular weight (M_n = 4520–9080) and low polydispersity (M_w/M_n ≤ 1.11). Treatment of poly 3c with trifluoroacetic acid simultaneously removed the MEM and OOB groups, affording poly(o‐hydroxyamide) (poly 4 ) without scission of the amide linkages. Cyclodehydration of poly 4 proceeded at 350 °C to yield PBO (poly 5 ), which was insoluble in organic solvents and acids. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1730–1736     

Creep behavior of amorphous ethylene–styrene interpolymers in the glass transition region

The viscoelastic behavior of amorphous ethylene–styrene interpolymers (ESIs) was studied in the glass transition region. The creep behavior at temperatures from 15°C below the glass transition temperature (T_g) to T_g was determined for three amorphous ESIs. These three copolymers with 62, 69, and 72 wt % styrene had glass transition temperatures of 11, 23, and 33°C, respectively, as determined by DMTA at 1 Hz. Time–temperature superposition master curves were constructed from creep curves for each polymer. The temperature dependence of the shift factors was well described by the WLF equation. Using the T_g determined by DMTA at 1 Hz as a reference temperature, C₁ and C₂ constants for the Williams, Landel, and Ferry (WLF) equation were calculated as approximately 7 and 40 K, respectively. The master curves were used to obtain the retardation time spectrum and the plateau compliance. The entanglement molecular weight obtained from the plateau compliance increased with increasing styrene content as 1,600, 1,870, and 2,040, respectively. The entanglement molecular weight of the ESIs was much closer to that of polyethylene (1,390) than to that of polystyrene (18,700); this was attributed to the unique chain microstructure of these ESIs with no styrene–styrene dyads. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2373–2382, 1999     

Radical polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate

The polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate (BDMPI) with benzoyl peroxide (BPO) in N,N-dimethylformamide (DMF) was studied kinetically by ESR. The polymerization rate (R_p) at 70°C was given by R_p = k[BPO]^0.78[BDMPI]^1.1. The overall activation energy of polymerization was determined to be 83.7 kJ/mol. The number-average molecular weight of poly(BDMPI) was in the range of 1500–2000 by gel permeation chromatography. From the ESR study, the polymerization system was found to involve ESR-observable propagating radicals of BDMPI under practical polymerization conditions. Using the polymer radical concentration by ESR, the rate constants of propagation (k_p) and termination (k_t) were determined in the temperature range of 50–70°C. The k_p value seemed dependent on the chain-length of propagating radical. The analysis of polymers by the MALDI-TOF mass spectrometry suggested that most of the resulting polymers contain the dimethylamino terminal group. The copolymerization of BDMPI (M₁) and styrene (M₂) at 50°C in DMF gave the following copolymerization parameters; r₁ = 0.49, r₂ = 0.26, Q₁ = 1.2, and e₁ = +0.63. The thermal behavior of poly(BDMPI) was examined by dynamic thermogravimetry and differential scanning calorimetry. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1891–1900, 1997     

Synthesis and characterization of thermotropic liquid crystalline poly(ester imide)s

Two closely series of poly(ester imide)s had been synthesized by solution polycondensation of p‐phenylenebis(trimellitate) dianhydride with aliphatic diamines. The differential scanning calorimetry (DSC) traces of the most poly(ester imide)s exhibited two endotherms representing the solid state to anisotropic phase transition (T_m1) and the anisotropic to isotropic melt transition (T_m2), respectively. Observation under polarizing microscope and wide‐angle X‐ray diffraction (WAXD) measurements suggested that the anisotropic phase formed above the melting points (T_m1) had a smectic character. The thermogravimetric analyses (TGA) revealed that the thermal stabilities of the poly(ester imide)s were up to 350°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 211–218, 1999     

Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Radical polymerization behavior of trimethoxyvinylsilane

Trimethoxyvinylsilane (TMVS) was quantitatively polymerized at 130 °C in bulk, using dicumyl peroxide (DCPO) as initiator. The polymerization of TMVS with DCPO was kinetically studied in dioxane by Fourier transform near‐infrared spectroscopy. The overall activation energy of the bulk polymerization was estimated to be 112 kJ/mol. The initial polymerization rate (R_p) was expressed by R_p = k[DCPO]^0.6[TMVS]^1.0 at 120 °C, being closely similar to that of the conventional radical polymerization involving bimolecular termination. The polymerization system involved electron spin resonance (ESR) spectroscopically observable polymer radicals under the actual polymerization conditions. ESR‐determined apparent rate constants of propagation and termination were 13 L/mol s and 3.1 × 10⁴ L/mol s at 120 °C, respectively. The molecular weight of the resulting poly(TMVS)s was low (M_n = 2.0–4.4 × 10³), because of the high chain transfer constant (C_mtr = 4.2 × 10^?2 at 120 °C) to the monomer. The bulk copolymerization of TMVS (M₁) and vinyl acetate (M₂) at 120 °C gave the following copolymerization parameters: r_l = 1.4, r₂ = 0.24, Q₁ = 0.084, and e₁ = +0.80. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5864–5871, 2005     

Anionic ring-opening polymerization of silacyclobutane derivatives

Anionic polymerizations of 1,1-dimethylsilacyclobutane, 1,1-diethylsilacyclobutane and 1-methyl-1-phenylsilacyclobutane were investigated. Addition of 5 mol % of butyllithium to a solution of 1,1-dimethylsilacyclobutane in THF-hexane (1 : 1) at −48°C provided poly(1,1-dimethylsilabutane) in 99% yield. M_n and M_w/M_n of the obtained polymer were 2400 and 1.10. This polymerization proceeded with a living nature. M_n increased in proportion as the yield of polymer increased. Addition of the second fresh feed of the monomer to the reaction mixture restarted polymerization of the second monomer at the same rate as in the initial stage. Addition of styrene to the living poly(1,1-dimethylsilabutane) provided a poly(1,1-dimethylsilabutane-b-styrene) block copolymer. It was also found that a polymerization of 1,1-diethylsilacyclobutane in THF-hexane at −48°C showed a living nature. In contrast, a polymerization of 1-methyl-1-phenylsilacyclobutane in THF at −78°C did not show a living nature. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3207–3216, 1997     

Triphenylphosphine oxide-based bismaleimide and poly(bismaleimide): Synthesis,characterization, and properties

A novel phosphorus-containing bismaleimide, 3,3′-bis(maleimidophenyl)phenylphosphine oxide (BMPPPO), was synthesized from triphenylphosphine oxide. This bismaleimide exhibited good solubility in common organic solvents, such as methylethylketone, methylisobutylketone, dichloromethane, chloroform, tetrahydrofuran, acetone, methanol, ethanol, and hot toluene. A low melting point (T_m = 148 °C), a relatively low polymerization temperature (T_p = 214 °C), and a wide processing window (T_p − T_m = 66 °C) were also obtained for BMPPPO. This implies better processing capability. In contrast to most known phosphorus-containing polymers, the incorporation of BMPPPO into poly(bismaleimide) enhanced the polymer glass-transition temperature. Thermal stability at temperatures over 550 °C and char yields in the high-temperature region over 700 °C were also improved. As a result, the flame-retardant properties of the poly(bismaleimide)s were improved. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1716–1725, 2001