Synthesis and characterization of new type soluble poly(amide–imide)s based on 6FDA imide modified polyterephthalamides

A series of new poly(amide–imide)s (PAIs, series III ) with good processability and characteristics was synthesized by utilizing organosoluble polyimide (PI, 6FDA–PI series) to improve poor‐solubility polyamide (PA, PTPA series), which used terephthalic acid (TPA) as a monomer. The III series PAIs were synthesized starting from the 2 : 1 molar ratio of aromatic diamines ( I ) and 6FDA to prepare imide ring‐preformed diamines ( II ) and then reacted with equimolar amount of TPA by direct polycondensation. Furthermore, by adjustment of the stoichiometry of the I , II, and TPA monomers, PAIs IV having various components were prepared. Most of the resulting PAIs having inherent viscosities between 0.70 and 1.74 dL/g were obtained in quantitative yields, and they were readily soluble in polar solvents such as N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, dimethylformamide, and dimethyl sulfoxide. All of the soluble PAIs afforded transparent, flexible, and tough films. The glass‐transition temperatures of PAIs III were in the range of 236–256 °C, and the 10% weight loss temperatures were recorded at 522–553 °C in nitrogen. The char yields of the III series polymers in nitrogen atmosphere were all higher than 56% even at 800 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 93–104, 2001     

Synthesis and properties of soluble and light‐colored poly(amide‐imide‐imide)s on the basis of tetraimide‐dicarboxylic acid condensed from 4,4′‐oxydiphthalic anhydride, 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane,and m‐aminobenzoic acid,and various aromatic diamines

A new type of tetraimide‐dicarboxylic acid ( I ) was synthesized starting from the ring‐opening addition of m‐aminobenzoic acid, 4,4′‐oxydiphthalic anhydride, and 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane at a 2:2:1 molar ratio in N‐methyl‐2‐pyrrolidone (NMP), followed by cyclodehydration to the diacid I . A series of soluble and light‐colored poly(amide‐imide‐imide)s ( III _a–j) was prepared by triphenyl phosphite‐activated polycondensation from I with various aromatic diamines ( II _a–j). All films cast from N,N‐dimethylacetamide (DMAc) had cutoff wavelengths shorter than 390 nm (374–390 nm) and b* values between 25.26 and 43.61; these polymers were much lighter in color than the alternating trimellitimide series. All of the polymers were readily soluble in a variety of organic solvents such as NMP, DMAc, N,N‐dimethylformamide, dimethyl sulfoxide, and even in less polar m‐cresol and pyridine. Polymers III _a–j afforded tough, transparent, and flexible films that had tensile strengths ranging from 96 to 118 MPa, elongations at break from 9 to 11%, and initial moduli from 2.0 to 2.5 GPa. The glass‐transition temperatures of the polymers were recorded at 240–268 °C. They had 10% weight loss at a temperature above 540 °C and left more than 55% residue even at 800 °C in nitrogen. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 707–718, 2002; DOI 10.1002/pola.10153     

Three‐component polyaddition of diamines,carbon disulfide,and diacrylates in water

The three‐component polyaddition of diamines, carbon disulfide (CS₂), and diacrylates in water was successfully achieved without the use of a surfactant or catalyst. Appropriate reaction conditions (i.e., reaction temperature, reaction time, and CS₂ feed) enabled the polyaddition of 1,3‐di‐4‐piperidylpropane ( 1a ), CS₂, and 1,6‐hexanediol diacrylate ( 2a ) to afford the corresponding poly(dithiourethane‐amine) containing 83% of dithiourethane units in 84% yield. Polyaddition of other monomers also proceeded under the optimum conditions to afford various poly(dithiourethane‐amine)s. Unsuccessful results for polyaddition in organic solvents such as toluene, tetrahydrofuran, and N,N‐dimethylformamide revealed that the polyaddition is accelerated in water. The obtained poly(dithiourethane‐amine)s adsorbed Au (III) efficiently under acidic conditions, due to the strong interaction of the thiocarbonyl sulfur in the dithiourethane unit with Au (III). The poly(dithiourethane‐amine)s also showed selective adsorption for Au (III) from a mixture of metal ions [Au (III), Fe (III), Mn (II), and Zn (II)], which indicates their potential utilization for the collection of gold. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 845–851, 2010     

Intermolecular C—F...H—C contacts in the molecular packing of three isostructural N‐(fluorophenyl)mannopyranosylamines

Among the three compounds reported here, namely N‐(4‐fluorophenyl)‐β‐d ‐mannopyranosylamine, (I), N‐(3‐fluorophenyl)‐β‐d ‐mannopyranosylamine, (II), and N‐(2‐fluorophenyl)‐β‐d ‐mannopyranosylamine, (III), all with chemical formula C₁₂H₁₆FNO₅, (I) and (II) are isostructural, whereas (III) assumes the same packing arrangement as the unfluorinated analogue N‐phenyl‐β‐d ‐mannopyranosylamine, (IV), which has been reported previously. Similarities with respect to the intermolecular hydrogen‐bonding patterns exist across the series (I)–(III). A packing motif that distinguishes the shared packing arrangement of (I) and (II) from that of (III) is a C—F...H—C chain of graph set C(4) that is preserved in the formal exchange of F and H atoms at the 4‐ and 3‐positions on the aromatic ring of (I) and (II), but is replaced by a different chain of graph set C(5) when the F atom is located at the 2‐position of the aromatic ring in (III). The steric role of the F atom in (I)–(III) is ambiguous but is examined here in detail.     

Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003     

Graft polymerization of vinyl monomers inside macroporous polyacrylamide gel,cryogel, in aqueous and aqueous‐organic media initiated by diperiodatocuprate(III) complexes

Graft polymerization initiated by diperiodatocuprate(III) complex (Cu(III)) initiator was found to be an effective and convenient method for graft polymerization of vinyl monomers onto macroporous polyacrylamide gels, the so‐called cryogels (pAAm‐cryogels). The effect of time, temperature, monomer and initiator concentration during the graft polymerization in aqueous and aqueous‐organic media was studied. The graft polymerization of water‐soluble monomers as [2‐(methacryloyloxy)ethyl]‐trimethylammonium chloride, 2‐hydroxyethyl methacrylate, N‐isopropylacrylamide, and N,N‐dimethylacrylamide proceeds with higher grafting yield in aqueous medium, as compared with that in aqueous‐organic media. Graft polymerization in aqueous‐organic media such as water–DMSO solutions allows grafting of water‐insoluble monomers such as glycidyl methacrylate and N‐tert‐butylacrylamide with high grafting degrees of 100 and 410%, respectively. It was found that the deposition of initiator on the pore surface of cryogels promoted graft polymerization by facilitating the formation of the redox couple Cu(III)‐acrylamide group. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1952–1963, 2006     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Syntheses,Structures, and Magnetic Behavior of New Azide Linked Compounds with One‐ and Two‐Dimensional Structures

Three azide based compounds were synthesized employing aliphatic amines as site blocking agents: [Ni(N₃)(C₆H₁₆N₂)₂]ClO₄ ( I ) [C₆H₁₆N₂ = N,N′‐diethylethylenediamine (DEDA)], [Cu₈(N₃)₁₆(C₆H₁₈N₄)₂] ( II ) [C₆H₁₈N₄ = tris(2‐aminoethyl) amine (TREN)], and [Cu₇(N₃)₁₄(C₇H₁₉N₃)₂] · 2H₂O ( III ) [C₇H₁₉N₃ = 3,3′‐diamino‐N‐methyldipropylamine (DMDA)]. The compounds I and II have one‐dimensional structure and III has a two‐dimensional structure. Compound I is a simple linear cationic Ni–azide chain and compound II has Cu₆ azide units forming a column terminated by the copper‐metalloligand generated in‐situ during the course of the reaction. The charge compensation perchlorate anions occupy spaces in between the chains in I . Compound II packs in a herringbone arrangement, which is not commonly observed in low‐dimensional structures. Compound III has one‐dimensional copper‐azide chains connected through copper‐metalloligand forming the two‐dimensional structure. All the three compounds exhibit anti‐ferromagnetic behavior.     

Temperature‐responsive linear polyelectrolytes and hydrogels based on [2‐(methacryloyloxy)ethyl] trimethylammonium chloride and N‐isopropylacrylamide and their complex formation with potassium hexacyanoferrates (II,III)

Water‐soluble temperature‐responsive polyelectrolytes and hydrogels have been synthesized by γ‐radiation copolymerization of [2‐(methacryloyloxy)‐ethyl]trimethylammonium chloride with N‐isopropylacrylamide. Complex formation of soluble copolymers with potassium hexacyanoferrates (II, III) was studied in aqueous solutions. It was shown that, depending on the concentration and temperature, the formation of soluble or insoluble polycomplexes is observed. The hydrogels show good ability to absorb potassium hexacyanoferrates (II, III) from aqueous solutions. Sorption ability of hydrogels depends on the content of cationic monomer in copolymer and the nature of coordination ion. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 515–522, 2004     

Effect of phenol and derivatives on atom transfer radical polymerization in the presence of air

The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (M_w/M_n < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004     

4‐(9,10‐Dihydroacridin‐9‐ylidene)thiosemicarbazide and its five‐membered thiazole and six‐membered thiazine derivatives

Two methyl derivatives, five‐membered methyl 2‐{2‐[2‐(9,10‐dihydroacridin‐9‐ylidene)‐1‐methylhydrazinyl]‐4‐oxo‐4,5‐dihydro‐1,3‐thiazol‐5‐ylidene}acetate, C₂₀H₁₆N₄O₃S, (I), and six‐membered 2‐[2‐(9,10‐dihydroacridin‐9‐ylidene)‐1‐methylhydrazinyl]‐4H‐1,3‐thiazin‐4‐one, C₁₈H₁₄N₄OS, (II), were prepared by the reaction of the N‐methyl derivative of 4‐(9,10‐dihydroacridin‐9‐ylidene)thiosemicarbazide, C₁₄H₁₂N₄S, (III), with dimethyl acetylenedicarboxylate and methyl propiolate, respectively. The crystal structures of (I), (II) and (III) are molecular and can be considered in two parts: (i) the nearly planar acridine moiety and (ii) the singular heterocyclic ring portion [thiazolidine for (I) and thiazine for (II)] including the linking amine and imine N atoms and the methyl C atom, or the full side chain in the case of (III). The structures of (I) and (II) are stabilized by N—H...O hydrogen bonds and different π–π interactions between acridine moieties and thiazolidine and thiazine rings, respectively.     

Hydrogen‐transfer polymerization of vinyl monomers derived from 4‐methylbenzoyl isocyanate and acrylamide derivatives

The anionic polymerization of N‐acryloyl‐N′‐(4‐methylbenzoyl)urea (1) was carried out at 80°C for 24 h in DMF, DMSO, acetonitrile, or toluene by t‐BuOK or DBU (3 mol %) as an initiator to obtain polymer 3 in a good yield. The structure of 3 was dependent upon the initiator used, in which t‐BuOK selectively conducted the hydrogen‐transfer polymerization, while DBU partially induced the vinyl polymerization (16–20%). Likewise, N‐acryloyl‐N‐methyl‐N′‐(4‐methylbenzoyl)urea (2, i.e., an N‐methylated derivative of 1) was subjected to the hydrogen‐transfer polymerization. Although the yield of the polymer was lower in comparison with 1, the structure of the obtained polymer 4 was similarly governed by the initiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 465–472, 1999     

Bulk cyclopolymerization of 1,2:5,6‐diepithio‐3,4‐di‐O‐methyl‐1,2:5,6‐tetradeoxy‐D‐mannitol with quaternary ammonium salts leading to gel‐free thiosugar polymer

The bulk cyclopolymerization of diepisulfide, 1,2:5,6‐diepithio‐3,4‐di‐O‐methyl‐1,2:5,6‐tetradeoxy‐D ‐mannitol ( 1 ), was studied using R₄N⁺Br^? (R = ? CH₃, C₂H₅, C₃H₇, C₄H₉, and C₇H₁₅) and (C₄H₉)₄N⁺X^? (X = Cl, I, NO₃, and ClO₄) as the initiators. All the bulk polymerizations of 1 using quaternary tetraalkylammonium salts at 90 °C proceeded without gelation even at high conversion to produce gel‐free polymers consisting of 2,5‐anhydro‐1,5‐dithio‐D ‐glucitol (I) as the major cyclic repeating unit along with 1,5‐anhydro‐2,5‐dithio‐D ‐mannitol (II) and the desulfurized acyclic unit (III) as the minor units. The polymerization rate and molar fraction of the I unit increased with the increasing alkyl chain length of the tetraalkylammonium cation and the increasing nucleophilicity of the counteranion. Tetrabutylammonium chloride exhibited the highest catalytic activity and the highest stereoselectivity, that is, the thiosugar polymer with I:II:III = 81:15:4 and a number‐average molecular weight of 31.9 × 10³ was obtained in 85% yield for a polymerization time of 0.5 h. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 965–970, 2002     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

Isomeric Schiff bases related by dual imino‐group reversals

Two isomeric pairs of Schiff bases, N,N′‐bis­(2‐methoxy­benzyl­idene)‐p‐phenyl­enediamine, C₂₂H₂₀N₂O₂, (I), and 2,2′‐dimeth­oxy‐N,N‐(p‐phenyl­enedimethyl­ene)dianiline, C₂₂H₂₀N₂O₂, (II), and (E,E)‐1,4‐bis­(3‐iodo­phen­yl)‐2,3‐diaza­buta‐1,3‐diene (alternative name: 3‐iodo­benzaldehyde azine), C₁₄H₁₀I₂N₂, (III), and N,N′‐bis­(3‐iodo­phen­yl)ethylenedi­imine, C₁₄H₁₀I₂N₂ [JAYFEV; Cho, Moore & Wilson (2005). Acta Cryst. E 61 , o3773–o3774], differ pairwise only in the orientation of their imino linkages and in all four individual cases occupy inversion centers in the crystal, yet all four compounds are found to assume unique packing arrangements. Compounds (I) and (II) differ substantially in mol­ecular conformation, possessing angles between their ring planes of 12.10 (15) and 46.29 (9)°, respectively. Compound (III) and JAYFEV are similar to each other in conformation, with angles between their imino linkages and benzene rings of 11.57 (15) and 7.4 (3)°, respectively. The crystal structures are distinguished from each other by different packing motifs involving the functional groups. Inter­molecular contacts between meth­oxy groups define an R₂²(6) motif in (I) but a C(3) motif in (II). Inter­molecular contacts are of the I⋯I type in (III), but they are of the N⋯I type in JAYFEV.     

Thermal analysis of the multiple melting behavior of poly(butylene succinate‐co‐adipate)

The melting behavior of poly(butylene succinate‐co‐adipate) (PBSA) isothermally crystallized from the melt was investigated by differential scanning calorimetry. Triple, double, or single melting endotherms were observed in subsequent heating scan for the samples isothermally crystallized at different temperatures. These endothermic peaks were labeled as I, II, and III for low‐, middle‐, and high‐temperature melting endotherms, respectively. The independence of endotherm III to the crystallization temperature, the existence of an exothermic crystallization peak just below the endotherm III, and the heating rate dependence of endotherm III indicated that endotherm III was due to the remelting of recrystallized lamellar during a heating scan. The influence of crystallization time on the melting behavior of PBSA showed that endotherms II and III developed prior to endotherm I; endotherm III developed rather simultaneously with endotherm II. Further investigation showed that the peak temperature of endotherm I increased linearly with the logarithm of the crystallization time. It suggested that endotherm II was attributed to the melting of the primary lamellae, while endotherm I was due to the melting of secondary lamellae. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3077–3082, 2005     

Ethylene polymerization using novel titanium catalytic precursors bearing N,N‐dialkylcarbamato ligands

Polymerization catalysts based on N,N‐dialkylcarbamato complexes of titanium(IV) appear particularly interesting, because these novel catalytic precursors are rather cheap and easy to synthesize and handle. This contribution reports ethylene polymerization behavior of titanium(IV) complexes of general formula Ti(O₂CNR₂)₄ R = Me ( I ) and Et ( II ) and TiCl₂(O₂CNMe₂)₂ ( III ). These precursors in conjunction with methylaluminoxane resulted active catalysts for the polymerization of ethylene, affording high‐density polyethylene with limited branch content. The influence of the polymerization parameters was studied with particular reference to the type of catalyst components, solvent, temperature, monomer concentration, and Al/Ti ratio. The nature of the solvent appears crucial for catalytic performances: when toluene was replaced by chlorobenzene, a significant increase of the productivity was ascertained. The obtained polymers were characterized by DSC, size exclusion chromatography, FTIR, and NMR techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polynorbornene with pentafluorophenyl imide side chain groups: Synthesis and sulfonation

The mixtures of exo‐endo‐monomers and isomerically pure endo‐monomers of N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide ( 2a ) and N‐phenyl‐norbornene‐5,6‐dicarboximide ( 2b ) were synthesized and polymerized via ring opening metathesis polymerization using bis(tricyclohexylphosphine) benzylidene ruthenium ( IV ) dichloride ( I ) and tricyclohexylphosphine [1,3‐bis(2,4,6‐trimethylphenyl)‐4,5‐dihydroimidazol‐2‐ylidene][benzylidene] ruthenium dichloride ( II ). Ring opening metathesis polymerization of mixtures of exo‐endo‐monomers ( 2a ) and ( 2b ) and pure endo‐ 2b gave the corresponding high molecular weights poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) ( 3a ) and poly(N‐phenyl‐norbornene‐5,6‐dicarboximide) ( 3b ). The isomerically pure endo‐ 2a did not polymerize by I in these conditions, since I is the least active catalyst and endo‐ 2a is the least active monomer because of the intramolecular complex formation between the Ru active center and the fluorine atom of ring‐opened endo‐ 2a on the one hand and steric hindrances caused by the pentafluorinated ring on the other. The quantitative hydrogenation of the polymer 3a , at room temperature and 115 bar, was achieved by a Wilkinson's catalyst. The new polynorbornene bearing highly fluorinated sulfonic acid groups (5) was obtained by the reaction of the hydrogenated poly(N‐pentafluorophenyl‐norbornene‐5,6‐dicarboximide) (4) with sodium 4‐hydroxybenzenesulfonate dihydrate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2925–2933, 2010     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Salts of two pentahalo(N‐donor)­bismuthate(III) anions: [BiX5L]2− (X = Cl,Br; L = pyridine, 4‐picoline)

Two pentahalo(N‐donor)­bismuthate(III) salts, bis­[hydrogen bis(4‐picoline)(1+)] penta­bromo(4‐picoline‐N)bismuthate(III), (C₁₂H₁₅N₂)₂[BiBr₅(C₆H₇N)], (I), and bis­(pyridinium) penta­chloro­(pyridine‐N)­bismuthate(III), (C₅H₆N)₂[BiCl₅(C₅H₅N)], (II), are described which show modest deviations from octahedral geometry at bismuth. In (I), the cations comprise two 4‐picoline mol­ecules sharing a proton and in (II), pyridinium cations are present. The anion in (I) has twofold and that in (II) has mirror crystallographic symmetry. Both structures show a layered packing formed by the anions with the cations between the layers. Ring–ring interactions seem important in (I), whilst in (II), N/­C—H?Cl—Bi hydrogen bonding is abundant.