Thermotropic liquid‐crystalline polyesters containing biphenyl mesogens in the main chain: The effect of connectivity

A homologous series of main‐chain thermotropic liquid‐crystalline polyesters containing rigid biphenyl mesogen and flexible methylene spacers were synthesized with the AB‐type self‐polycondensation approach. The polyesters were characterized with ¹H NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarized light optical microscopy, and X‐ray diffraction. These polyesters, containing trimethylene spacers on the acid side and various spacers on the alcohol side of the biphenyl mesogen, showed an odd–even effect in the transition temperatures and mesophase type. The even members showed higher transition temperatures than the odd ones. A normal smectic mesophase was observed for the even members, whereas the odd‐membered counterparts exhibited a tilted smectic mesophase. To study the effect of connectivity, the mesophase characteristics of these polyesters were compared with those of the isomeric AB‐type polyesters without any methylene spacer on the acid side of the biphenyl moiety. The mesophase characteristics were insensitive to whether the mesogen was connected to a carboxyl unit or a methylene unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2734–2746, 2004     

Soluble rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain for light-emitting applications

New rigid–flexible polyethers containing bis(biphenyl)anthracene or bis(styryl)anthracene units in the main chain were synthesized and characterized by viscosimetry, thermal and mechanical analysis, NMR, UV-vis, and luminescence spectroscopy. The polyethers containing bis(styryl)anthracene units in the main chain form free-standing films either from solution casting or after melt pressing at temperatures where they are thermally stable. The length of the flexible spacer influences the thermal and mechanical behavior of these polymers. The isotropization temperature as well as the glass transition temperature show an odd–even effect depending on the spacer segment length. Films with high modulus at room temperature and glass transition temperatures in the range 74–103°C were obtained using dynamic mechanical analysis. These polymers show bright-yellow photoluminescence with maximum at 580 nm in solution. In the solid state, the luminescence maximum is either red or blue shifted depending on the number of the methylene units in the aliphatic segment. The polyethers containing bis(biphenyl)anthracene units in the main chain are blue-light-emitting polymers with photoluminescence maxima at 435 and 455 nm in solution. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3826–3837, 1999     

Effect of the length of the substituents on the phase structure and transition behavior of a series of laterally attached side‐chain liquid‐crystalline polynorbornenes

A series of polynorbornenes (PNBEs) with 1,4‐bis[(3′‐fluoro‐4′‐n‐alkoxyphenyl)ethynyl]benzene mesogens (n = 1–12, where n is the number of methylene units in the substituents of the mesogens) laterally attached to polymer backbones through a one‐carbon spacer were previously synthesized by the ring‐opening metathesis polymerization of the corresponding norbornene‐based monomers. Differential scanning calorimetric results showed that the first‐order transition temperatures exhibit an odd–even alternation, especially when PNBEs have lower values of n. PNBE (n = 8), similar to the previously studied PNBEs (n = 9–12), shows a smectic C (S_C) phase at room temperature (Kim, Pugh, and Cheng, Macromolecules, 33, 8983, 2000.) According to one‐ and two‐dimensional wide‐angle X‐ray scattering experiments, PNBEs (n = 2–7) exhibit a nematic (N) phase with S_C fluctuations, whereas for PNBE (n = 1), only an N phase is observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3029–3037, 2001     

Structure–property relationship of photoactive liquid crystalline polyethers containing benzylidene moiety

A series of main chain photoactive liquid crystalline polyethers, containing rigid bisbenzylidene photoactive mesogen and flexible methylene spacers, were synthesized by polycondensation of bisbenzylidene diols and dibromoalkanes. The polyethers were characterized with ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimeter (DSC), thermo gravimetric analyzer (TGA), and polarized light optical microscopy. The individual and combined effects of spacer length and number of methoxy substituents on mesogenic and photoactive properties were investigated. Both first order and second order transition temperatures decreased with increased spacer length and the number of substituents. The combined effect of spacers and substituents drastically reduced the transition temperatures. All monomers and polymers showed mainly the smectic mesophase. In a few cases, nematic droplets along with the smectic phase were observed. The width of the liquid crystalline phase reduced with an increasing number of methoxy substituents on mesogenic unit. Variation of spacer length has a negligible effect on photocycloaddition. However, steric hinderance caused by the substituents decreased the photoactivity as the number of substituents increased. Total energies of crosslinked dimers calculated from modeling studies supported the above findings. Intermolecular photocycloaddition was also confirmed by photoviscosity measurement. The refractive index change was found to be in the range of 0.017–0.031. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2143–2155, 2009     

Thermotropic liquid‐crystalline poly(oxadiazole)s with poly(methylene) spacers: Preparation and extraordinary odd–even effect

A novel synthetic procedure for the preparation of poly(oxadiazole)s was developed with nucleophilic substitution of α,ω-alkanediols with oxadiazole-activated bisfluoride. Seven poly(oxadiazole)s were successfully prepared by the solution polymerization of 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole and various α,ω-alkanediols [HO (CH₂)_n OH, n = 5–10 or 12] in diphenyl sulfone at temperature greater than 230 °C with K₂CO₃ as a catalyst. The reduced viscosities of the poly(oxadiazole)s were 0.14–0.51 dL/g, and the decomposition temperatures were greater than 350 °C and decreased from 436 to 379 °C with increasing spacer length (n). Corresponding model compounds, consisting of two terminal mesogenic 2,5-bisphenyl-1,3,4-oxadiazole units and central poly(methylene) spacers, were also prepared for comparison. Both the polymers and model compounds exhibited an extraordinary odd–even effect: odd ones showed higher transition temperatures (melting and clearing temperatures). With differential scanning calorimetry, polarized optical microscopy (POM), and X-ray diffraction, we found that the nematic mesophase was the only texture in the melts except for the polymers with longer methylene units (n = 9), in which smectic mesophases were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 293–301, 2002     

Synthesis and characterization of polymaleimides containing 4-cyanobiphenyl–based side groups for nonlinear optical applications

A new homologous series of SCLCPs containing the 4-cyanobiphenyl mesogenic group attached to the polymaleimide backbone through paraffinic spacers of two to eight methylene units have been prepared. All the polymers exhibit liquid crystalline behavior; specifically S_Ad- (or S_C-) like and nematic phases are observed. The glass transition temperature decreases from 150 to 43°C on increasing spacer length. The isotropization temperatures exhibit an odd–even effect on varying the length and parity of the spacer, in which the odd members exhibit the higher values. This is attributed to the change in the average shape of the side chain as the parity of spacer is varied. The isotropization temperatures (>300–120°C) and the mesophase thermal stabilities (190–60°C) are high. Comparison is made with polymers containing the same mesogenic group attached to backbones of decreasing rigidity. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2531–2546, 1998     

Studies on the odd‐even effect of methylene spacers in poly(pyromellitimide‐ester)s

Three series of poly(pyromellitimide‐ester)s were synthesized from various N,N′‐bis(ω‐hydroxyalkyl)pyromellitimides (HAPMIs) by melt condensation with dicarboxylic acids, including terephthalic acid (TPA), 4,4′‐biphenyldicarboxylic acid (BPDA), and 4,4′‐azobenzenedicarboxylic acid (ABDA). Polymers were characterized by elemental analysis, solubility, inherent viscosity, spectra (IR, ¹H‐NMR, ¹³C‐NMR), and X‐ray diffraction (XRD). Thermal stability and phase transition behaviour were evaluated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and hot‐stage optical polarized microscopy (HOPM). The d‐spacings, calculated from XRD data, showed an odd‐even effect with varying numbers of methylene spacers. Crystallinity of polymers decreased in the following order: azobenzene > biphenyl > phenyl polymers. Similarly, DSC‐obtained melting temperatures (T_m's) showed an odd‐even effect, and glass transition temperatures (T_g's) decreased with increasing numbers of methylene spacers. Thermal stability decreased as methylene chain length increased. Thermal stability of polymers occurred in the following order: phenyl > biphenyl > azobenzene polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1755–1761, 1999     

Effects of the alkyl side-chain length on the structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s

The structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s (ASE-Ns) were examined with X-ray, IR, DSC, and polarized optical microscopy. The structures of ASE-Ns were strongly dependent on the alkyl side-chain length. ASE-2 and ASE-3, the shortest ones, were amorphous materials. ASE-4 and ASE-5 showed nematic characteristics. ASE-6–ASE-12 had smectic A structures. ASE-14 and ASE-16 could be labeled as more ordered structures higher than smectic A (probably smectic B or smectic E). The d-spacings of the first small-angle reflections were double the most extended side-chain length and linearly increased with a slope of 2.50 Å per methylene unit, regardless of the structural phases. The maintenance of the double-layered structure in all ASE-Ns may be due to the strong dipole–dipole interactions at both sides of the layers against the main chain for all amorphous, nematic, and smectic phases of ASE-Ns. The double-layered structure was maintained above the isotropic temperature, indicating that dipole–dipole interactions were not destroyed although the alkyl side chains melted during the isotropic transition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1868–1874, 2004     

Synthesis and characterization of side‐chain liquid‐crystalline poly(ethyleneimine)s with cyanobiphenyl groups

A series of polyethyleneimine‐based side‐chain liquid‐crystalline polymers substituted with different ratios of cyanobiphenyl as pendent mesogenic groups has been synthesized in which the spacer length varies between two and six methylene units. The structures of the synthesized polymers are confirmed by infrared and ¹H nuclear magnetic resonance spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. The results indicate that the thermal behaviour of the polymers is strongly dependent on the degree of substitution. Polymers containing more than 69% of mesogenic groups exhibit nematic‐type thermotropic liquid‐crystalline behaviour with schlieren textures. Below this limit, the polymers are amorphous. Polymers with a higher degree of substitution present the crystalline states. The phase transition temperatures increase and the mesomorphic temperature ranges widen with increasing degree of substitution. The clearing temperatures decrease as the spacer length increases. An odd–even effect in the clearing temperatures is observed and the odd members display the higher values.     

Non-symmetric chiral isoflavone dimers: synthesis,characterisation and mesomorphic behaviour

A new series of non-symmetric chiral isoflavone-based liquid crystalline dimers, α-(2-methylbutyl-4′-(4″-phenyloxy)benzoate)-ω-(3-(4′-decyloxyphenyl)-4H-1-benzopyran-4-one-7-oxy)alkanes, with 3–12 carbon atoms in the alkyloxy spacer, have been synthesised. A pronounced odd–even effect for the phase transition temperatures upon varying the spacer length was observed. The short dimers exhibited monolayer smectic A (SmA) and smectic C (SmC*) phases while for longer homologues a chiral nematic (N*) phase was found. The temperature range of the nematic phase was broadened with elongation of the alkyl spacer. Stabilisation of the nematic phase resulted from competition between the monolayer and intercalated smectic structures. The SmA–SmC* phase transition was second order for all studied compounds with a cross over to the de Vries type behaviour for the shortest homologue.     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Synthesis and characterization of liquid‐crystalline polyphosphonates containing disubstituted ferrocene esters as mesogens

A series of ferrocene‐containing liquid‐crystalline polyphosphonates with an even number of methylene groups are reported. All the polymers gave birefringent melts. The mesophase was identified as transparent with an increase in the spacer. The effects of pendant substitution and the spacer were studied with thermogravimetric analysis and differential scanning calorimetry. The effects of the phosphonate group in the spacer and the ferrocene ester group in the mesogen were examined. The presence of a steplike mesogenic structure and a pendant phenyl group in the spacer led to reductions in the glass‐transition and melting temperatures. The ferrocene moiety in the mesogen might be one of the reasons for the increased thermal stability and decreased liquid crystallinity. An energy‐minimized structure for the mesogenic and spacer segments was created with computer‐modeling programs, and it suggested the reason for the reductions in the glass‐transition and melting temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2256–2263, 2002     

Highly fluorinated monomers precursors of side-chain liquid crystalline polysiloxanes

Two series of monomers, 4-[4-(allyloxy)benzoyloxy]phenyl-3-(perfluoro-n-alkyl)ethyl propanoates and 2-(perfluoro-n-alkyl)ethyl-4-[4-(undec-10-en-1-oyloxy)-benzoyloxy] benzoates have been synthesised. These compounds contain a fluorinated chain obtained from 2-(perfluoro-n-alkyl)ethanol or from 2-(perfluoro-n-alkyl)ethyliodide, and an aliphatic chain containing a double bond attached to a mesogenic moiety. Their hydrosilylation with polymethylhydrogenosiloxane gives the corresponding polysiloxanes with a spacer with three or ten methylene units. These new fluorinated compounds are characterized by a combination of techniques consisting of differential scanning calorimetry (DSC) and thermal optical polarized microscopy. All the monomers exhibited smectogenic properties of type A but for the monomers with a long spacer between the unsaturated function and the mesogenic core (compounds B), the mesophase range decreases dramatically. All of the corresponding polysiloxanes exhibited a liquid crystalline behaviour over a wide temperature range. The influence of the fluorinated chain lengthening leads for the monomers and the polymers to an increasing of the transition temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4487–4496, 1999     

Synthesis and thermal properties of side‐chain liquid crystalline poly[1‐({(4‐methoxyazobenzene‐4′‐oxy)alkyl}thio)‐2.3‐epoxypropane]s

A novel series of side‐chain liquid crystalline copolymers, i.e. poly‐[1‐({(4‐methoxyazobenzene‐4′‐oxy)alkyl}thio)‐2.3‐epoxypropane]s, were synthesised in which the number of methylene units in the alkyl group of the side chain varies from 3 to 6. The structures of compounds obtained were characterised by elemental analysis and ¹H NMR spectroscopy. Thermal properties were investigated using polarising optical microscopy, differential scanning calorimetry and X‐ray diffraction analysis. The synthesised thiols and corresponding polyepichlorohydrin‐based copolymers exhibited thermotropic liquid crystalline behaviour and nematic phases with schlieren textures. The thiols have lower transition temperatures than the corresponding copolymers. In addition, the degree of substitution of the copolymers synthesised increased with an increase in number of methylenes in the side chain. The phase transition temperatures increased and the mesomorphic temperature ranges widened with the increasing degree of substitution of the copolymers.     

Investigation on dual properties of photosensitive thermotropic liquid‐crystalline poly(benzylidene‐ether)s containing alkanones and methylene spacers in the main chain

Thermotropic main chain liquid‐crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐diformyl‐2,2′‐dimethoxy‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone, and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxy‐3‐methoxybenzaldehyde with dibromoalkanes of varying spacer lengths. The structure of monomers and polymers was confirmed by elemental analyses, Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectral analyses. The thermal properties were studied by thermogravimetric analysis and differential scanning calorimetry. Thermogravimetric analysis (TGA) data revealed that the polymers were stable up to 285 °C and start degrading thereafter. Cyclopentanone‐containing polymers are more stable than cyclohexanone‐ and acetone‐containing polymers. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index values using Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using differential scanning calorimetry (DSC), and it was proved that the isotropic temperature decreases with an increase in the length of the spacer. Polarized optical microscopic study showed that cyclohexanone‐containing polymers exhibit nematic threadlike and nematic droplet texture. The photolysis of liquid‐crystal poly(benzylidene‐ether)s revealed that the Entgegen, Zusammen (EZ) photoisomerization proceeds in the system. The band gap energy was calculated from absorption spectra and is in the range of 3.05–3.37 eV and proved that the length of spacers has a significant influence on their absorption and emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of side-chain liquid crystal polyurethanes

A series of liquid crystal α-[bis(2-hydroxyethyl)amino]-ω-(4-nitroazobenzene-4′-oxy)alkanes (Cn-diol) with different alkyl chain length has been synthesized. All Cn-diols exhibit a smectic phase that has been identified by means of polarizing microscopy and differential scanning calorimetry. These compounds are suitable monomers for the synthesis of side-chain liquid crystalline polyurethanes and polyesters. They were polymerized with hexamethylene diisocyanate to corresponding SCLC polyurethanes in which the spacer length was varied from 2 to 12 methylene units. Polyurethanes (CnP) with spacer lengths n ≥ 4 exhibited liquid crystalline behavior. Fourier transform infrared temperature studies of the CnP were done focusing on H-bonds between the N H and CO groups of the urethane backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2871–2888, 1997     

Synthesis and chiroptical properties of optically active polymer liquid crystals containing azobenzene chromophores

A series of optically active methacrylic homopolymers, poly[(4‐{4′‐[(S)‐2‐methyl‐1‐butyloxycarbonyl]phenylazo}phenoxyl)x‐methylene methacrylate] (x = 0, 2, 6, or 11), were synthesized. The structures of the polymers were characterized by IR, ¹H NMR, UV, differential scanning calorimetry, and gel permeation chromatography. The chiroptical properties of the polymers in films were investigated with circular dichroism (CD) measurements. The CD and UV spectra of the films suggested that CD absorptions occurred in the films of the polymers with long spacers (x = 6 or 11) but not in the films of the polymers with short spacers (x = 0 or 2). After irradiation with linearly polarized light at 442 nm, the CD values were amplified in all the polymeric films. The amplificatory values of the CD bands in the absorption region (260–360 nm) of azobenzene chromophores suggested that the spacer length had an effect on both the transfer of chirality and photoinduced chirality in the polymeric films. The largest level of photoinduced chirality was induced in the polymer containing six methylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3210–3219, 2006     

Molecular and collective relaxations of ferroelectric side chain liquid crystalline polysiloxanes

The influences of mesogenic group chemical structures on dielectric relaxation behavior were investigated for ferroelectric side chain liquid crystalline polymers (FLCPs). The relaxation time and activation energies of the Goldstone mode, α‐, and β‐relaxations decrease with increasing spacer length because of the plasticizer effect of the spacer. Moreover, the relaxation intensity increases with increasing spacer length for FLCPs. An FLCP with a longer spacer length exhibits a higher mesogenic group mobility, and subsequently leads to easier reorientation toward the alternating electrical field. An increase in mesogenic core rigidity results in an increase in the relaxation time and activation energies, and a decrease in the relaxation intensities for the Goldstone mode, α‐, and β‐relaxations. Moreover, the β‐relaxation is suppressed and cannot be observed in the glassy state for FLCPs containing naphthyl biphenylcarboxylate as the mesogenic group. Shorter relaxation time, smaller activation energies, and higher intensity of the α‐, and β‐relaxations were obtained for FLCPs containing chiral moiety with a flexible heptyl alkyl chain. However, the relaxation intensity of the Goldstone mode for FLCPs containing this chiral moiety was smaller than that for FLCPs containing the chiral moiety with a butyl alkyl chain. For FLCPs containing a chiral moiety with two asymmetrical centers, their Goldstone mode relaxation showed larger amplitude. The α‐ and β‐relaxations are suppressed for these FLCPs because of the dense packing and memory effect of the smectic phase. The relationship between the chemical structure of the mesogenic group and dielectric relaxations is discussed in great detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2035–2049, 2006     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304