Block copolymerization of allene derivatives with isocyanides by the coordination polymerization with π-allylnickel catalyst

A living block copolymerization of allene derivatives with 1-phenylethyl isocyanide ( 3 ) using [(allyl)NiOCOCF₃]₂ ( 1 ) is described. After complete polymerization of allene monomers such as n-octyloxyallene ( 2A ) with 1 , further addition of 3 to the reaction system yielded the corresponding block copolymers in high yield. For instance, a block copolymer ( 4A , M_n = 39,600, M_w/M_n = 1.20) was obtained in 96% yield by the addition of 3 ([ 3 ]/[ 1 ] = 250) to the living solution of poly(n-octyloxyallene) (M_n = 14,400, M_w/M_n = 1.03) prepared by the polymerization of 2A in the ratio of [ 2A ]/[ 1 ] = 90. The resulting copolymer was a brownish orange gum or a solid, depending on the length of each of the segments. The solubility of the block copolymers could be controlled by the allene components. The copolymer of 2A with 3 having appropriate length of segments was soluble in n-hexane, while that of methoxyethoxyethoxyallene ( 2D ) with 3 was soluble in methanol. © 1997 John Wiley & Sons, Inc.     

Synthesis of arborescent styrene homopolymers and copolymers from epoxidized substrates

The synthesis of arborescent styrenic homopolymers and copolymers was achieved by anionic polymerization and grafting. Styrene and p‐(3‐butenyl)styrene were first copolymerized using sec‐butyllithium in toluene, to generate a linear copolymer with a weight‐average molecular weight M_w = 4000 and M_w/M_n = 1.05. The pendant double bonds of the copolymer were then epoxidized with m‐chloroperbenzoic acid. A comb‐branched (or arborescent generation G0) copolymer was obtained by coupling the epoxidized substrate with living styrene‐p‐(3‐butenyl)styrene copolymer chains with M_w ≈ 5000 in a toluene/tetrahydrofuran mixture. Further cycles of epoxidation and coupling reactions while maintaining M_w ≈ 5000 for the side chains yielded arborescent copolymers of generations G1–G3. A series of arborescent styrene homopolymers was also obtained by grafting M_w ≈ 5000 polystyrene side chains onto the linear and G0–G2 copolymer substrates. Size exclusion chromatography measurements showed that the graft polymers have low polydispersity indices (M_w/M_n = 1.02–1.15) and molecular weights increasing geometrically over successive generations. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Construction of PIB‐b‐PDEAEMA well‐defined amphiphilic diblock copolymers via sequential living carbocationic and RAFT polymerization

A series of well‐defined amphiphilic diblock copolymers consisting of hydrophobic polyisobutylene (PIB) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments was synthesized via the combination of living carbocationic polymerization and reversible addition fragmentation chain transfer (RAFT) polymerization. Living carbocationic polymerization of isobutylene followed by end‐capping with 1,3‐butadiene was first performed at ?70 °C to give a well‐defined allyl‐Cl‐terminated PIB with a low polydispersity (M_w/M_n =1.29). This end‐functionalized PIB was further converted to a macromolecular chain transfer agent for mediating RAFT block copolymerization of 2‐(diethylamino)ethyl methacrylate at 60 °C in tetrahydrofuran to afford the target well‐defined PIB‐b‐PDEAEMA diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.22). The self‐assembly behavior of these amphiphilic diblock copolymers in aqueous media was investigated by fluorescence spectroscopy and transmission electron microscope, and furthermore, their pH‐responsive behavior was studied by UV‐vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1478–1486     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

The effect of structure on the thermoresponsive nature of well‐defined poly(oligo(ethylene oxide) methacrylates) synthesized by ATRP

Statistical copolymers of di(ethylene glycol) methyl ether methacrylate (MEO₂MA) and tri(ethylene glycol) methyl ether methacrylate (MEO₃MA) were synthesized by atom transfer radical polymerization (ATRP) providing copolymers with controlled composition and molecular weights ranging from M_n = 8,300–56,500 with polydispersity indexes (M_w/M_n) between 1.19 and 1.28. The lower critical solution temperature (LCST) of the copolymers increased with the mole fraction of MEO₃MA in the copolymer over the range from 26 to 52 °C. The average hydrodynamic diameter, measured by dynamic light scattering, varied with temperature above the LCST. These two monomers were also block copolymerized by ATRP to form polymers with molecular weight of M_n = 30,000 and M_w/M_n from 1.12 to 1.21. The LCST of the block copolymers shifted toward the LCST of the major segment, as compared to the value measured for the statistical copolymers at the same composition. As temperature increased, micelles, consisting of aggregated PMEO₂MA cores and PMEO₃MA shell, were formed. The micelles aggregated upon further heating to precipitate as larger particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 194–202, 2008     

Controlled/living polymerization of methacrylamide in aqueous media via the RAFT process

The polymerization of methacrylamide (MAM) was performed in aqueous media via reversible addition fragmentation chain transfer (RAFT) polymerization with the dithiobenzoate chain‐transfer agent (CTA) 4‐cyanopentanoic acid dithiobenzoate (CTP) and 4,4′‐azobis(4‐cyanopentanoic acid) (V‐501) as initiator. The polymerization in unbuffered water at 70 °C with a CTP/V‐501 ratio of 1.5 was controlled for the first 3 h, after which the molecular weight distribution broadened and a substantial deviation of the experimental from the theoretical molecular weight occurred, presumably because of a loss of CTA functionality at longer polymerization times. Conducting the polymerization in an acidic buffer afforded a well‐defined homopolymer (M_n = 23,800 g/mol, M_w/M_n = 1.08). To demonstrate the controlled/living nature of the system, a block copolymer of MAM and acrylamide was successfully prepared (M_n = 33,800 g/mol, M_w/M_n = 1.25) from a polymethacrylamide macro‐CTA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3141–3152, 2005     

Living carbocationic copolymerization of isobutylene with styrene

The carbocationic copolymerization of isobutylene (IB) and styrene (St), initiated by 2‐chloro‐2,4,4‐trimethylpentane/TiCl₄ in 60/40 (v/v) methyl chloride/hexane at ?90 °C, was investigated. At a low total concentration (0.5 mol/L), slow initiation and rapid monomer conversion were observed. At a high total comonomer concentration (3 mol/L), living conditions (a linear semilogarithmic rate and M_n–conversion plots) were found, provided that the St concentration was above a critical value ([St]₀ ～ 0.6 mol/L). The breadth of the molecular weight distribution decreased with increasing IB concentration in the feed, reaching M_w/M_n ～ 1.1. St homopolymerization was also living at a high total concentration, yielding polystyrene with M_n = 82,000 g/mol, the highest molecular weight ever achieved in carbocationic St polymerization. An analysis of this system by both the traditional gravimetric–NMR copolymer composition method and FTIR demonstrated penultimate effects. IB enrichment was found in the copolymers at all feed compositions, with very little drift at a high total concentration and above the critical St concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1778–1787, 2007     

Effect of isomeric pyridine moieties in ethynylstyrene derivatives on their anionic polymerization

The anionic polymerization behaviors of ethynylstyrene derivatives containing isomeric pyridine moieties, 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( A ), 3‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ), and 4‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( C ), were investigated in the identical conditions. The anionic polymerization of A – C was performed with (diphenylmethyl)potassium (Ph₂CHK) in tetrahydrofuran (THF) at ?78 °C. The polymerization of A proceeded quantitatively at –78 °C for 4 h, and the resulting poly( A ) possessed predictable molecular weights (M_n = 3300–68,500) and narrow molecular weight distributions (MWDs) (M_w/M_n = 1.04–1.11). In contrast, the anionic polymerization of B was not performed at –78 °C for 4 h due to the occurrence of side reactions. The monomer B was quantitatively recovered after the reaction. In the polymerization of C performed at –78 °C for 6 h, observed M_n values of the resulting poly( C ) were in good agreement with calculated molecular weights based on monomer to initiator ratios, but the MWDs were somewhat broad (M_w/M_n = 1.23–1.31). To estimate the reactivity of A and to characterize its living nature, the block copolymerization of A with 2‐vinylpyridine (2VP) and methyl methacrylate (MMA) was performed. The well‐defined block copolymers, poly(2VP)‐b‐poly( A ) and poly( A )‐b‐poly(MMA), were successfully synthesized without any additives. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Synthesis of novel asymmetric dendritic‐linear‐dendritic block copolymers via “living” anionic polymerization of ethylene oxide initiated by dendritic macroinitiators

The first synthesis of asymmetric dendritic‐linear‐dendritic ABC block copolymers, that contain a linear B block and dissimilar A and C dendritic fragments is reported. Third generation poly(benzyl ether) monodendrons having benzyl alcohol moiety at their “focal” point were activated by quantitative titration with organometallic anions and the resulting alkoxides were used as initiators in the “living” ring‐opening polymerization of ethylene oxide. The reaction proceeded in controlled fashion at 40–50 °C affording linear‐dendritic AB block copolymers with predictable molecular weights (M_w = 6000–13,000) and narrow molecular weight distributions (M_w/M_n = 1.02–1.04). The propagation process was monitored by size‐exclusion chromatography with multiple detection. The resulting “living” copolymers were terminated by reaction either with HCl/tetrahydrofuran or with a reactive monodendron that differed from the initiating dendron not only in size, but also in chemical composition. The asymmetric triblock copolymers follow a peculiar structure‐induced self‐assembly pattern in block‐selective solvents as evidenced by size‐exclusion chromatography in combination with multi‐angle light scattering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5136–5148, 2007     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Living copolymerization of ethylene with norbornene mediated by heteroligated (Salicylaldiminato)(β‐enaminoketonato)titanium catalysts

Three heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH?N(C₆F₅)][(p‐XC₆H₄)N?C(Bu^t)CHC(CF₃)O]TiCl₂ ( 3a : X = F, 3b : X = Cl, 3c : X = Br) were synthesized and investigated as the catalysts for ethylene polymerization and ethylene/norbornene copolymerization. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts exhibited high activities toward ethylene polymerization, similar to their parallel parent catalysts. Furthermore, they also displayed favorable ability to efficiently incorporate norbornene into the polymer chains and produce high molecular weight copolymers under the mild conditions, though the copolymerization of ethylene with norbornene leads to relatively lower activities. The sterically open structure of the β‐enaminoketonato ligand is responsible for the high norbornene incorporation. The norbornene concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. When the norbornene concentration in the feed is higher than 0.4 mol/L, the heteroligated catalysts mediated the living copolymerization of ethylene with norbornene to form narrow molecular weight distribution copolymers (M_w/M_n < 1.20), which suggested that chain termination or transfer reaction could be efficiently suppressed via the addition of norbornene into the reaction medium. Polymer yields, catalytic activity, molecular weight, and norbornene incorporation can be controlled within a wide range by the variation of the reaction parameters such as comonomer content in the feed, reaction time, and temperature. ©2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6072–6082, 2009     

Glycoconjugated polymer: Synthesis and characterization of poly(vinyl saccharide)‐block‐polystyrene‐block‐poly(vinyl saccharide) as an amphiphilic ABA triblock copolymer

Styrene (St) was polymerized with α,α′‐bis(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)‐1,4‐diethylbenzene ( 1 ) as an initiator (bulk, [St]/] 1 ] = 570) at 120 °C for 5.0 h to obtain polystyrene having 2,2,6,6‐tetramethylpiperidiloxy moieties on both sides of the chain ends ( 2 ) with a number‐average molecular weight (M_n) of 14,300 and a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.14. 4‐Vinylbenzyl glucoside peracetate ( 3a ) was polymerized with 2 as a macromolecular initiator and dicumyl peroxide (DCP) as an accelerator in chlorobenzene at 120 °C. The polymerization with the [ 3a ]/[ 2 ]/[DCP] ratio of 30/1/1.2 for 5 h afforded a product in a yield of 73%; it was followed by purification with preparative size exclusion chromatography to provide the ABA triblock copolymer containing the pendant acetyl glucose on both sides of the chain ends ( 4a ; M_n = 21,000, M_w/M_n = 1.16). Similarly, the polymerization of 4‐vinylbenzyl maltohexaoside peracetate produced the ABA triblock copolymer containing the pendant acetyl maltohexaose on both side of the chain end ( 4b ; M_n = 31,800, M_w/M_n = 1.11). Polymers 4a and 4b were modified by deacetylation into amphiphilic ABA triblock copolymers containing the pendant glucose and maltohexaose as hydrophilic segment, 5a and 5b , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3978–3985, 2006     

Grafting by in situ coupling of epoxy groups of a living copolymer with an anionic living polymer

A tetrahydrofuran (THF) solution of the living random copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) was prepared by the living anionic copolymerization of the two monomers, using 1,1‐diphenylhexyllithium (DPHLi) as initiator, in the presence of LiCl ([LiCl]/[DPHLi]₀ = 3), at −50°C. The copolymer thus obtained has a controlled composition and molecular weight and a narrow molecular weight distribution. By introduction of an anionic living polystyrene (poly(St)) or anionic living polyisoprene (poly(Is)) solution into the above system at −30°C, a coupling reaction took place and a graft copolymer with a polar backbone and nonpolar side chains was produced. The solvent used in the preparation of the living poly(St) or poly(Is) affects the coupling reaction. When benzene was the solvent, a graft copolymer of high purity, controlled graft number and molecular weight, and narrow molecular weight distribution (M_w/M_n = 1.11–1.21) was obtained. In the coupling reaction, the living poly(St) reacted only with the epoxy groups and not with the carbonyls of the backbone polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 105–112, 1999     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012