Tubular polypyrrole synthesized by in situ doping polymerization in the presence of organic function acids as dopants

Tubular polypyrrole (PPy) could be synthesized by in situ doping polymerization in the presence of β‐naphthalene sulfonic acid (NSA) as dopant. The resultant tubular PPy–NSA not only exhibits high room temperature conductivity (ς_RT = 10 S/cm) but is also soluble in m‐cresol. The molecular structure of PPy–NSA is identical to the characteristic structure of PPy synthesized by a conventional method. It has been demonstrated that NSA dopant with large molecular size and plate–lebe structure is a key factor to control formation of tubular PPy–NSA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1443–1449, 1999     

In situ doping polymerization of polyaniline microtubules in the presence of β‐naphthalenesulfonic acid

Conducting microtubules of Polyaniline (PANI) were synthesized for the first time by the “in situ doping polymerization” method in the presence of β‐naphthal‐ enesulfonic acid (NSA) as dopant. Different doping methods, such as “immerse doping” and “grind doping,” and different synthetic conditions, such as molar ratio of aniline (An) to NSA (An/NSA), concentration of NSA in the polymerization media, reaction temperature, and time were investigated to understand the formation of microtubules. It was found that the PANI–NSA microtubules can be formed only by the “in situ doping polymerization” method, and the above synthetic conditions strongly affect the formation of the PANI–NSA microtubules, especially the molar ratio of An to NSA. An optimal condition was found under which tubules with 1–3 μm in diameter and 10–50 μm in length were obtained. The morphology of PANI–NSA tubules was proved by SEM and TEM, and their backbone structure was characterized by FTIR, UV‐VIS, XPS, and X‐ray diffraction. Results of these measurements showed that the molecular structures of the resulted PANI–NSA microtubules were identical to that of PANI–HCl synthesized by conventional method. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 151–157, 1999     

Synthesis and in situ doping of highly conductive polypyrrole nanocomplexes with binary acids

The synthesis of doped polypyrrole (PPy) nanocomplexes and their size, morphology, doping level, and electrical conductivity are discussed. The synthetic route of doped PPy nanocomplexes is presented by means of the chemical oxidative polymerization and in situ doping process in the presence of a binary acid mixture (hydrochloric acid and perchloric acid). The electrical conductivities of the doped PPy nanocomplexes are enhanced from 0.88 to 4.5 S/cm by the optimum molar ratio of HClO₄ and HCl in the binary acid mixture. In addition, the average particle size of the doped PPy nanocomplexes decreases from 280 to 30 nm with a narrow particle size distribution when increasing the proportion of HClO₄ relative to HCl in the binary acid mixture; this result is confirmed by scanning electron microscopy, transmission electron microscopy, and capillary hydrodynamic fractionation instrument analyses. Moreover, at different molar ratios in the binary acid mixture, the zeta‐potential and oxidation level of the doped PPy nanocomplexes have a confirmed association with particle size and electrical properties. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2329–2336     

Conducting polyaniline‐coated nano silica by in situ chemical oxidative grafting polymerization

Polyaniline (PAni) grafted nano silica were synthesized successfully by in situ polymerization of aniline (An) using ammonium persulphate (APS) as oxidant by three procedures: Firstly, γ‐(2,3‐epoxypropoxy)propyltrimethoxysilane (EPTMS) reacted with nano silica. Secondly, the EPTMS modified nano silica reacted with An as an initiator site introduced onto the silica surface, and finally PAni grafted silica was obtained by in situ chemical oxidative An. The chemical grafting of PAni was confirmed by FTIR and UV–Vis. The percentages of grafting EPTMS and An onto nano silica were 24.5 wt% and 10.3 wt%, respectively, calculated from elemental analysis (EA), while the percentage of grafting PAni was 157.7 wt% as a mass ratio of the grafting PAni and charged nano silica, investigated by TGA. In addition, characteristic agglomerate morphology of PAni was observed in the composite by SEM. The electrical conductivity of the product was 2.6 × 10^?6 S cm^?1 and it manifested that the resulted product was a typical semiconductor. Copyright © 2007 John Wiley & Sons, Ltd.     

Microtubules of polyaniline doped with HCl and HBF4

Microtubules of polyaniline (PANI) doped with HCl, HBF₄, and β-naphthalene sulfonic acid (NSA) were synthesized by an improved in situ doping polymerization method. Ultraviolet-visible spectra, scanning electron microscopy, ESR, and X-ray diffraction characterized the molecular structure of the resulting PANI microtubules. These microtubules had a diameter of 1 ∼ 10 μm and a conductivity at room temperature of 0.2 ∼ 3.5 S/cm, depending on the molecular structure and concentration of the dopant. The degree of crystallinity of the PANI microtubules was enhanced by increasing the molecular size of the dopant; that is, the order PANI-NSA > PANI-HBF₄ > PANI-HCl was observed in the crystallinity of the microtubules. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4605–4609, 1999     

In situ polymerization and reduction to fabricate gold nanoparticle‐incorporated polyaniline as supercapacitor electrode materials

Nanocomposites of gold nanoparticles and polyaniline are synthesized by using HAuCl₄ and ammonium peroxydisulfate as the co‐oxidant involving in situ polymerization of aniline and in situ reduction of HAuCl₄. Through these in situ methods, the synthesized Au nanoparticles of ca. 20 nm embedded tightly and dispersed uniformly in polyaniline backbone. With the Au content in composite increasing from 4.20 to 24.72 wt.%, the specific capacitance of the materials first increased from 334 to 392 F g⁻¹ and then decreased to 298 F g⁻¹. Based on the real content of PANI in composite material, the highest specific capacitance is calculated to be 485 F g⁻¹ at the Au amount of 19.15 wt.%, which remains 55.6% after 5000 cycles at the current density of 2 A g⁻¹. Finally, the asymmetric supercapacitor of AuNP/PANI||AC and the symmetric supercapacitor of AuNP/PANI||AuNP/PANI are assembled. The asymmetric supercapacitor device shows a better electrochemical performance, which delivers the maximum energy density of 7.71 Wh kg⁻¹ with power density of 125 W kg⁻¹ and maximum power density of 2500 W kg⁻¹ with the energy density of 5.35 Wh kg⁻¹.     

Synthesis and Characterization of Self-Assembled V2O5 Mesostructures Intercalated by Polyaniline

A new nanocomposite of vanadium pentoxide (V2O5) and polyaniline (PANI) were synthesized by in situ oxidative polymerization/intercalation on V2O5 powder at room temperature. The reaction was facile and topotactic, forming polyaniline as the emeraldine salt. It was indicated that V2O5 itself can catalyze the oxidative polymerization of aniline and that layered structure could make aniline intercalate into the V2O5 framework. It makes the in situ polymerization feasible to occur in the layer of V2O5 structure. XRD results showed PANI/V2O5 nanocomposite possessed lamellar mesostructure, which was determined by an X-ray diffraction peak at 6.5° and SEM photograph. And FT-IR spectrum suggested that there was interaction between PANI and V2O5. The hybrid had better thermal stability in N2 and air ambience.     

Morphological development and rheological changes of phenoxy/SAN blends during in‐situ polymerization

This article reports the results of an investigation into the time‐dependent morphological and rheological changes that accompany the in‐situ polymerization of blends composed of poly(hydroxyether of bisphenol A) (phenoxy) and poly(styrene‐co‐acrylonitrile) (SAN). The rheological behavior was monitored continuously during the in‐situ polymerization, whereas the miscibility and phase structure of blends formed in situ were examined at discrete stages of polymerization by differential scanning calorimetry and transmission electron microscopy. In the blend with 30 wt % SAN, a co‐continuous blend morphology was associated with gradual changes in the dynamic moduli, suggesting that phase separation proceeded by spinodal decomposition (SD). In contrast, phenoxy‐rich dispersions were uniformly dispersed in a continuous SAN‐rich matrix in the blend with 50 wt % SAN, and the corresponding rheological signature revealed a sharp initial increase in the dynamic moduli, followed by slower growth after long times, indicative of phase separation via nucleation and growth (NG). The rheological property changes are closely related to morphology development and mechanisms of phase separation induced duringin‐situ polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2614–2619, 2007     

Nanocomposite structures of polypyrrole derivatives and poly (acrylonitrile‐co‐itaconic acid) produced by in situ polymerization as carbon nanofiber precursor

This study aimed to produce nanoparticles of poly (acrylonitrile‐co‐itaconic acid) (P (AN‐co‐IA)) containing conjugated polymers of pyrrole, N‐Methylpyrrole, 2,5‐dimethylpyrrole, and 1‐(Triisopropylsilyl)pyrrole which were synthesized by emulsion polymerization. Nanocomposite structures of P (AN‐co‐IA)/polypyrrole and polymer of pyrrole derivatives were produced via in situ polymerization, and the nanoparticle formation were followed by morphologic and ultraviolet‐visible (UV‐Vis) spectroscopic methods. Characterizations were made by Fourier transform infrared‐attenuated total reflectance (FTIR‐ATR) and Raman spectroscopy. Atomic force microscopy (AFM) was used for investigating the surface characteristics of the nanoparticles. Characterization results revealed that nanoparticles containing conjugated polymers had rougher surface than P (AN‐co‐IA) nanoparticles. It was also observed that the nanoparticles were well‐distributed although having some agglomerates. Moreover, depending on the type of monomer of conjugated polymer, the shape and size of the produced nanoparticles differed by conjunction with their polymerization rate. These findings can be used as a startup information for production of carbon nanofibers (CNFs) with desired properties after oxidation and carbonization, and as a high‐performance and cost‐effective flame and heat‐resistant material (oxidized copolymers of polyacrylonitrile nanofiber).     

聚苯乙烯磺酸掺杂聚苯胺的性能

以苯胺为单体，过硫酸铵(APS)为氧化剂，在聚苯乙烯磺酸(PSSA)的水溶液中，合成了PSSA掺杂的聚苯胺。通过FTIR、元素分析和热重分析等对产物的结构和性能进行了研究。结果表明：该法合成的PSSA掺杂聚苯胺可完全溶于水,具有较高的特性粘数、电导率、耐热性。     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

聚苯乙烯磺酸掺杂聚苯胺的合成

以苯胺（An）为单体，过硫酸铵（APS）为氧化剂，在聚苯乙烯磺酸（PSSA）的水溶液中，合成了可完全溶于水的PSSA掺杂PAn。研究了An浓度，PSSA浓度，APS浓度，APS的滴加时间，反应时间及温度对An聚合反应及其产物的水溶性，导电性及特性粘度[η]的影响。结果表明：在比较宽的实验条件下，都可以合成出具有良好导电性的可溶于水的PSSA掺杂PAn；其中当An：PSSA:APS的摩尔比为1．7：2．5：1，APS溶液的滴加时间为3h，反应时间为1h，反应温度为14℃时，得到的掺杂PAn导电率最高达0．156S／cm。     

Synthesis,thermal properties and crystalline morphology of poly(trimethylene terephthalate)/ZnO nanocomposites prepared by dual in situ polymerization

Poly(trimethylene terephthalate)/ZnO nanocomposites were successfully prepared by dual in situ polymerization. Firstly, ZnO nanoparticles were synthesized by a simple polyol method using 1,3‐propanediol (PDO) as solvent and stabilizer. Then, PTT/ZnO nanocomposites were prepared by in situ polymerization. The results of Fourier transform infrared spectra showed that PTT molecular chains were grafted to the surface of ZnO nanoparticles. The results of ¹H NMR spectra confirmed that propyl ester molecules (as reaction product) were incorporated into PTT molecular chains. It was found that the intrinsic viscosity and molecular weight of synthesized PTT decreased with the addition of ZnO nanoparticles and the incorporation of propyl ester molecules. TEM results showed that ZnO nanoparticles with particle size of 20 ~ 30 nm were well dispersed and fully distributed in the polymer matrix. Besides, the melting temperatures and crystallization temperature decreased gradually and then increased slightly with the increasing loading of ZnO nanoparticles. Because of the strong interaction between ZnO nanoparticles and PTT matrix, the thermal stability of PTT/ZnO nanocomposites was improved. Interestingly, the results of Polarized Optical Microscopy showed that banded spherulites morphology can be observed in all PTT/ZnO nanocomposite samples. However, at higher loading of ZnO nanoparticles, band spacing became larger and was finally disturbed. Copyright © 2016 John Wiley & Sons, Ltd.     

Polyaniline nanofibers by surfactant‐assisted dilute polymerization for supercapacitor applications

Polyaniline nanofibers doped with citric acid was prepared by a novel surfactant‐assisted dilute polymerization technique. It was possible to synthesize polyaniline nanofibers without using any organic solvent by easier pathway. Polyaniline salt was characterized by conductivity, FTIR, and X‐ray diffraction studies. The specific capacitance behavior of the polyaniline nanofibers was characterized using cyclic voltammetry which exhibits highest specific capacitance of 298 F g^?1. The morphology of the obtained nanofibers was characterized by SEM studies. So, these kinds of specific properties of polyaniline nanofibers could be beneficial to the development of energy storage devices. Copyright © 2008 John Wiley & Sons, Ltd.     

Polyethylene/graphite nanocomposites obtained by in situ polymerization

The synthesis of polyethylene/graphite nanocomposites by in situ polymerization was achieved using the catalytic system Cp₂ZrCl₂ (bis(cyclopentadienyl)zirconium(IV) dichloride)/methylaluminoxane (MAO). Graphite with nano dimensions, previously treated with MAO, was added into the reactor as filler at percentages of 1, 2, and 5% (w/w). XRD analysis showed that the chemical and thermal treatments employed preserve the structure of the graphite sheets. The formation of graphite nanosheets and nanocomposites was confirmed by TEM and AFM. TEM micrographics showed that the polyethylene grew between the graphene nanosheets, giving intercalated and exfoliated graphite nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 692–698, 2010     

Polymerization of Aniline by Auric Acid: Formation of Gold Decorated Polyaniline Nanoballs

Summary: We report a new method for the preparation of polyaniline nanoballs by using HAuCl₄ as an oxidizing agent. During the reaction, aniline is oxidized and forms polyaniline whilst the hydrogen tetrachloroaurate is reduced and forms gold nanoparticles. These gold nanoparticles are found to decorate the nanoballs.

The resultant precipitate and corresponding TEM image of the gold‐nanoparticle covered polyaniline nanoball.     

Thermomechanical properties and crystallization behavior of layered double hydroxide/poly(ethylene terephthalate) nanocomposites prepared by in‐situ polymerization

Thermomechanical properties and crystallization behavior of poly(ethylene terephthalate) (PET) nanocomposites containing layered double hydroxide (LDH) were investigated. To enhance the compatibility between PET matrix and LDH, dimethyl 5‐sulfoisophthalate (DMSI) anion intercalated LDH (LDH‐DMSI) was synthesized by coprecipitation method, and its structure was confirmed by Fourier transform infrared (FTIR) spectrometer and X‐ray diffraction (XRD) measurements. Then, PET nanocomposites with LDH‐DMSI content of 0, 0.5, 1.0, and 2.0 wt% were prepared by in‐situ polymerization. The dispersion morphologies were observed by transmission electron microscopy (TEM) and XRD, showing that LDH‐DMSI was exfoliated in PET matrix. Thermal and mechanical properties, such as thermal stability, tensile modulus, and tensile yield strength of nanocomposites, were enhanced by exfoliated LDH‐DMSI nanolayers. However, elongation at break was drastically decreased with LDH loading owing to the increased stiffness and microvoids. The effect of exfoliated nanolayers, which acted as a nucleating agent confirmed by differential scanning calorimeter (DSC), on the microstructural parameters during isothermal crystallization, was analyzed by synchrotron small‐angle X‐ray scattering (SAXS). It is believed that nanocomposites could be crystallized more easily owing to the increased nucleation sites, which lead to the decrease of average amorphous region size and the long period with the increase of LDH‐DMSI content. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 28–40, 2007     

Synthesis of poly(urethane urea) by in situ polymerization inside stone

The first synthesis of poly(urethane urea) by in situ polymerization inside stone was successfully carried out. Poly(propylene glycol), isophorondiisocyanate, and a catalyst [tin(II) ethyl hexanoate, aluminum acetylacetonate, or zirconium acetylacetonate] were mixed with acetone in petri dishes, and tuff samples were placed in the dishes at room temperature. The effects of the comonomer ratio, catalyst, and catalyst concentration on the chemical structure of the synthesized poly(urethane urea) were investigated. The poly(urethane urea) distribution inside the tuff and the related morphology were also analyzed, as well as the reversibility of the performed treatments. Finally, the effects of the in situ polymerization polymer on the properties of the stone, such as water capillary absorption and permeability to water vapor, were assessed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 542–552, 2005     

原位聚合法制备厌氧胶固化引发剂微胶囊

采用原位聚合法制备了以脲醛树脂为壁材、过氧化苯甲酰为芯材的厌氧胶固化引发剂微胶囊。研究了乳化剂聚丙烯酸钠、十二烷基苯磺酸钠、阿拉伯树胶、苯乙烯-马来酸酐共聚物的单独使用及阿拉伯树胶与苯乙烯-马来酸酐共聚物的复配组合和其它工艺条件对微胶囊制备的影响;运用FT-IR、TG和SEM等测试技术对微胶囊进行了表征。结果表明,以苯乙烯-马来酸酐共聚物和阿拉伯树胶作为复合乳化剂,反应终点pH值为1.5左右,反应温度70℃,反应时间4 h,搅拌速率1 000 r/m in,可制得分散适中、形貌较好、粒径约为100μm的微胶囊。以实验制备的微胶囊配制成可预涂厌氧胶胶液,性能可以达到国外公司同类产品的技术指标。     

Polymerization mechanism for in situ supported metallocene catalysts

The polymerization of ethylene was carried out with a novel in situ supported metallocene catalyst that eliminated the need for a supporting step before polymerization. In the absence of trimethyl aluminum (TMA), in situ supported Et[Ind]₂ZrCl₂ was not active, but the addition of TMA during polymerization activated the catalyst. Et[Ind]₂Zr(CH₃)₂ was active even in the absence of TMA, whereas the addition of TMA during polymerization enhanced the catalytic activity. The polymerization‐rate profiles of the in situ supported metallocene catalysts did not show rate decay as a function of time. A polymerization mechanism for the in situ supported metallocene catalysts is proposed for this behavior. During polymerization, the in situ supported metallocene catalysts may deactivate, but homogeneous metallocene species present in the reactor may form new active sites and compensate for deactivated sites. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 462–468, 2000